[FONT] Standard0=Arial,12,ANSI Standard1=Arial,14,ANSI Back=Arial,50,ANSI, ,ITALIC [Message] Message=Firmware Update Tool TITLE=Firmware Update Tool Error=Firmware Update Tool FileError=Firmware Update Tool PdError=Firmware Update Tool ComError=Firmware Update Tool PDVError="Failed to initialize Packet Driver." PDVInstall="Packet Driver has not been installed.\nDo you want to install now?" RESTART="To complete the installation, the computer must be restarted. Close all other applications, then click [Yes]." CannotFindJCC="No working network board could be found. Check the connection." SuddenEOF="File Error" BreakUpdate="Are you sure you want to cancel updating?" ProgressTitle="Processing..." NowSearching="Searching a network board..." CommNowEA="Searching a network board..." AppModeStart=Sending application command... AppModeWait=Loading application... LoaderModeStart=Sending boot loader command... LoaderModeWait=Loading boot loader... NowErasingFarm=Deleting the current version... NowVerifying=Checking the result... NowUpdate=Transferring...(%d%%) NowGetEEP=Obtaining EEPROM information... SelectTitle="Select a network adapter" SelectCaption="More than two network adapters have been detected on this computer. Please select one for updating." CannotStartComm="Cannot communicate to the network board." [BACKGROUND] TITLE1="Network I/F GX2 Firmware Update Tool" TITLE2="" [LABEL] OK=OK CANCEL=Cancel PREV="< Back" NEXT="Next >" FINISH="Finish" EXEC="OK" RESEARCH="Retry" UPLOAD="Start" [static] BefVersion="Current Version" NewVersion="Update to" ListLabel="MAC Address Network Board" NoFile="Cannot find the update file." [WIZARD_BEGIN] TYPE=NOT TITLE="" MESSAGE="" BITMAP=defoem NEXT=SEARCH;99 [WIZARD99] TYPE=SEARCH TITLE="Select a network board." MESSAGE="Select a network board to update. When more than two network boards have been detected, check the MAC Address on the sticker attached to the machine or print out the Configuration Page and check the MAC Address." BITMAP=default NEXT=JUMP;4 BACK=INVISIBLE CANCEL=MESSAGE;Are you sure you want to cancel updating? [WIZARD04] TYPE=NORMAL TITLE="Firmware Update" MESSAGE="Read the following, then click [Start].\n\n(1)You cannot cancel updating once it has started.\n(2)You cannot restore the current version once the update is complete.\n(3)You may need to initialize and reset the settings." BITMAP=default NEXT=UPLOAD;BINFILE1;30;53 BACK=ENABLE CANCEL=MESSAGE;Are you sure you want to cancel updating? [WIZARD30] TYPE=NOTHING NEXT=WAITSTANDBY;30;31;53 [WIZARD31] TYPE=NOTHING NEXT=SENDAPPMODE;52;53 [WIZARD52] TYPE=NORMAL TITLE="Update completed" MESSAGE="Firmware update was successfully completed.\n\nThe network board setting must be initialized and reset . To initialize, press and hold down the Push Switch for more than 5 seconds when the network board is in operation, then reset the settings." BITMAP=default NEXT=FINISH BACK=DISABLE CANCEL=INVISIBLE [WIZARD53] TYPE=NORMAL TITLE="Update failed" MESSAGE="An unexpected error occurred. Repeat the process from the beginning.\n\nIf the network board is not detected on the next update, turn off the main switch then turn it on again while pressing and holding down the Push Switch for up to 2 seconds." BITMAP=P61_LMODE.bmp NEXT=FINISH BACK=DISABLE CANCEL=INVISIBLEDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.