README.txt Driver File Contents (z46835en.exe)

************************************************************************
SOFTWARE LICENSE AGREEMENT


YOU, THE END USER, SHALL USE THIS SOFTWARE("THE SOFTWARE") ACCORDING TO THE
TERMS OF THIS AGREEMENT.

BY LOADING THE SOFTWARE INTO ANY COMPUTER, YOU ARE AGREEING TO BE BOUND BY
THESE TERMS. IF YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT, YOU MAY NOT LOAD
THIS SOFTWARE INTO ANY COMPUTER.


Grant of License
The Software is licensed for use by you for the equipment packaged with the
Software or designated by its supplier ("the equipment"). You are permitted to
use the Software on any computer which permits electronic access to the
equipment. You are not permitted to rent or lease the Software or to transfer
your rights under this license to a third party.


Acceptance
You shall be deemed to have accepted the terms of this Agreement by loading the
Software into any computer.


Duration
This license is effective until terminated. The license will terminate where
you fail to comply with the terms of this Agreement. Upon termination, you
agree to destroy all copies of the Software and its documentation.


Ownership of Software
You own, if any, only the magnetic media on which the Software has been
delivered. It is an express condition of this Agreement that the title and
ownership of the Software shall be retained by its owners.


Copying
The Software and its documentation are the subject of Copyright.
You may not make any copies nor cause others to make copies of the Software
except such copies as are necessary for licensed use and one copy for
operational security. Any such copies are subject to the conditions of this
Agreement.
You may not modify, adapt, merge, translate, reverse engineer, decompile,
disassemble or create derivative works based on the whole or any part of the
Software or its associated documentation.

You may be held legally responsible for any copyright infringement,
unauthorized transfer, reproduction or use of the Software or its
documentation.


Limitation of Warranty
The media, if any, not the Software contained therein, is warranted to the
original purchaser against defects in material and workmanship for a period of
one year from the date of original purchase. Defective media will be replaced
when it is returned to your supplier, postage prepaid, along with a copy of the
purchase receipt.

THESE RIGHTS ARE YOUR SOLE AND EXCLUSIVE REMEDY, WHETHER IN TORT, CONTRACT, OR
OTHERWISE. IN NO EVENT SHALL SUPPLIER, OWNER OF THE SOFTWARE OR ITS LICENSORS
BE LIABLE FOR DAMAGES (INCLUDING ANY FOR LOSS OF INFORMATION, PROFITS, SAVINGS
OR BUSINESS INTERRUPTION OR OTHER DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES) ARISING OUT OF THE SOFTWARE OR THE USE THEREOF, OR THE
INABILITY TO USE THE SOFTWARE.


Exporting Law
You acknowledge that the export of the Software is governed by the export
control laws of the United States and other countries. You agree to comply with
all such export control laws.


Governing Law and Jurisdiction
If any provision or portion of this Agreement shall be found to be illegal,
invalid or unenforceable, the remaining provisions shall remain in full force
and effect. This Agreement shall be governed by the laws of California, USA and
is subject to the jurisdiction of the Federal District courts for the Central
District of California by a judge and not a jury.

************************************************************************

====================================================================================
Microsoft Windows (x86/x64) DDST Printer Driver
      Microsoft Windows 2000
      Microsoft Windows 2000 Server
      Microsoft Windows XP
      Microsoft Windows Server 2003
      Microsoft Windows Vista
      Microsoft Windows Server 2008
      Microsoft Windows 7
      Microsoft Windows Server 2008 R2
====================================================================================


Introduction

This readme file contains information about using DDST printer driver for
Windows 2000/XP/Server2003/Server2008/Vista/7. Please make sure to read this
before installing DDST printer driver.

<Contents>
  [1]How to install DDST printer driver
    (1) Installing DDST printer driver for the first time
    (2) Uninstalling DDST printer driver
    (3) Updating DDST printer driver
    (4) Notes
  [2] Limitation/Notes in using DDST printer driver
    (1) Limitation/Notes in printing
    (2) Limitation/Notes on Bi-directional Communication
    (3) Other Notes

========================================================================

[1]How to install DDST printer driver

    (1) Installing DDST printer driver for the first time
     If you are installing this product for the first time, please follow these
     steps;

     Please choose one installation method among (1)-1 and (1)-4 according
     to your Windows version and the connection with the printer.

     * Make sure to close all applications before installing.

    (1)-1 Installation for Windows 7/Server 2008R2 with USB-connected printers


        -1 Start Windows and log on as Administrators.

        -2 When using a driver downloaded from the Internet:
           After downloading the driver from the Internet, extract the file(s)
           to a folder of your choice.

        -3 Please connect your PC to the printer with USB cable, and turn ON 
            the power of the printer. Automatic installation (Plug and Play)
            of OS starts.
            Please wait untill the balloon help of "Device driver software
            was not successfully installed" appears, and click "Close".
           
        -4 In the [Search programs and files] field in the [Start] menu, enter
           "Device Manager" and launch it.

        -5 In the [Device manager] screen, right click on the printer, which
           is listed under [Other devices], and click [Update Device Software...].

        -6 With the uUpdate Driver Software - <printer name>vscreen, click 
            [Browse my computer for driver software]

        -7 Specify the folder of the driver files.
          A) To install the downloaded driver, click then [Browse] to locate

             the folder where you had extracted the downloaded driver, from
             this folder select Disk 1, then click "OK".

          B) To install from the CD, insert the CD-ROM into the CD ROM drive,
             enter the path (e.g. D:\DRIVERS\DDST\XP_VISTA\DISK1\) of the
             designated drive then click "Next >".  (You can also navigate to the
             drive by clicking the [Browse] button.).

        -8 Select the printer to use. After the selection, click "Close".


    (1)-2 Installation for Windows 2000/XP/Vista/Server 2008 with USB-connected
            printers


        The following procedure is based on Windows XP.
        The details may vary on other Windows versions.

        -1 Start Windows and log on as Administrators.

        -2 When using a driver downloaded from the Internet:
           After downloading the driver from the Internet, extract the file(s)
           to a folder of your choice.

        -3 Please connect your PC to the printer with USB cable, and turn ON 
           the power of the printer. Automatic installation (Plug and Play)
           of OS starts.

        -4 Choose [No, not this time], and click "Next>".

        -5 In the displayed screen [This Wizard helps you install software for:], 
            confirm that it is displayed with the printer, and choose 
            "Install from a list or specific location", then click "next".

        -6 Specify the folder of the driver files.
          A) To install the downloaded driver, click then [Browse] to locate
             the folder where you had extracted the downloaded driver, from
             this folder select Disk 1, then click "OK".

          B) To install from the CD, insert the CD-ROM into the CD ROM drive,
             enter the path (e.g. D:\DRIVERS\DDST\XP_VISTA\DISK1\) of the
             designated drive then click "Next >".  (You can also navigate to the
             drive by clicking the [Browse] button.).

        -7 Select the printer to use. After the selection, click "Finish".


   (1)-3 Installation for Windows 7/Server 2008R2 with network-connected printers 

        -1 Start Windows and log on as Administrators.

        -2 When using a driver downloaded from the Internet:
           After downloading the driver from the Internet, extract the file(s)
           to a folder of your choice.

        -3 From the [Start] menu, click [Devices and Printers], and click 
           [Add a printer] , then click "Next >".

        -4 Follow the Wizard guidance and select a printer connection method
           (Local or Network Printer), then click "Next >" to continue.

        -5 If the Local connection is selected, select a port, then click "Next>".

        -6 Specify the folder of the driver files.
          A) To install the downloaded driver, click [Have Disk] then [Browse]
             to locate the folder where you had extracted the downloaded
             driver, from this folder select Disk 1, then click "OK".

          B) To install from the CD, insert the CD-ROM into the CD ROM drive,
             [Have Disk] button in "Manufacturers:" / "Printers:" window, then
             enter the path (e.g. D:\DRIVERS\DDST\XP_VISTA\DISK1\) of the
             designated drive then click "OK".  (You can also navigate to the
             drive by clicking the [Browse] button.).

        -7 Select the printer to use. After the selection, click "Next >".

        -8 Specify the printer name. And if you want to use the installed
           printer as the default printer, check "Yes".  After the selection,
           click "Next >".

        -9 If you want to share the installed printer with other network users,
           choose and configure the shared printer.  After the sharing is
           configured, click "Next >".

        -10 Print the test page to confirm that the printer is set up properly.
           Check on "Yes(recommended)", then click "Finish", and finally, the
           installation is completed.


   (1)-4 Installation for Windows 2000/XP/Vista/2003/2008 with
         network-connected printers

        The following procedure is based on Windows XP.
        The details may vary on other Windows.

        -1 Start Windows and log on as Administrators.

        -2 When using a driver downloaded from the Internet:
           After downloading the driver from the Internet, extract the file(s)
           to a folder of your choice.

        -3 From the [Start] menu, click [Printers and Faxes]. 
           In the [Printer Tasks] click [Add a printer] , and click
           "Next >".

        -4 Follow the Wizard guidance and select a printer connection method
           (Local or Network Printer), then click "Next >" to continue.

        -5 If the Local connection is selected, select a port, then click
           "Next>" to continue.

        -6 Specify the folder of the driver files.
          A) To install the downloaded driver, click [Have Disk] then [Browse]
             to locate the folder where you had extracted the downloaded
             driver, from this folder select Disk 1, then click "OK".

          B) To install from the CD, insert the CD-ROM into the CD ROM drive,
             [Have Disk] button in "Manufacturers:" / "Printers:" window, then
             enter the path (e.g. D:\DRIVERS\DDST\XP_VISTA\DISK1\) of the
             designated drive then click "OK".  (You can also navigate to the
             drive by clicking the [Browse] button.).

        -7 Select the printer to use. After selecting, click "Next >".

        -8 Specify the printer name. And if you want to use the installed
           printer as the default printer, check "Yes".  After the
           selection, click "Next >".

        -9 If you want to share the installed printer with other network
           users, choose and configure the shared printer.  After the sharing
           is configured, click "Next >".

        -10 Print the test page to confirm that the printer is set up
            properly.  Check on "Yes(recommended)", then click "Finish", and
            finally, the installation is completed.

    After completing the above operations, you can use DDST printer driver.

    (2) Uninstalling DDST printer driver.

     * Make sure to close all applications before uninstalling.

     (2)-1 Windows 7/Server 2008 R2

        - 1 Open [Devices and Printers] from [Start] menu.
        - 2 Select the printer you want to uninstall.
        - 3 Press [Delete] key
        - 4 Select any printer (*1), Click [Print Server Properties]

           (*1) When there is no printer icon in the folder, enter
                "printmanagement.msc" into [Search programs and files] field
                in the [Start] menu, and launch it.
                Click [Print Servers] in a displayed [Print Management]
                screen.  Right click on your PC name and choose Properties
                to open the [Print Server Properties] dialog. 

        - 5 Select "Drivers" tab in [Print Server Property].
        - 6 Select the driver you want to uninstall.
        - 7 Press [Delete] key
            You are asked to choose "Remove driver only" or
            "Remove driver and driver package".  Please choose the latter.


     (2)-2 Windows 2000/XP/Vista/2003/2008

        The following procedure is based on Windows XP.
        The details may vary on other Windows.


        - 1 Open [Printers and Faxes] folder from [Start] menu.
        - 2 Select the printer you want to uninstall.
        - 3 Press [Delete] key
        - 4 Select "Driver" tab in Server Property from File menu in
            Printers folder.

        - 5 Select the driver you want to uninstall.
        - 6 Press [Delete] key
            On Windows Vista and Server 2008, you are asked to choose
            "Remove driver only" or "Remove driver and driver package".
            Please choose the latter.


    (3) Updating DDST printer driver
       Please follow these installation steps to update the printer driver from
       old version to new version;

        - 1 Uninstall the printer driver with the steps described in (2)
            "Uninstalling DDST printer driver"

        - 2 Please restart your PC.

        - 3 Install new version of the DDST printer driver with the steps
            described in (1) "Installing for the first time."


    After completing the above operation, you can use the new printer driver.


    (4) Notes

    -1 During the printer driver installation, Windows may alert that Windows
       can't verify the publisher of this driver.  However, the printer driver
       functionality is not affected.  Please continue the installation.

    -2 When you cannot install the "Printer driver from a driver & utility CD"
       on the OS of Windows 7/Server2008 R2, Please install by 
       "(1)Installing DDST printer driver for the first time" procedure.


[2] Limitation/Notes in using DDST printer driver

   (1) Limitation/Notes in printing
       [Windows functions]
    * If virtual memory on a Windows operating system is set lower than usual,
      insufficient memory errors will occur and drawing operations in
      applications or printer drivers will not perform properly.
  
      Documents might not print correctly or the following problems might occur:
        - Low memory warnings.
        - Application errors.
        - Printing discontinues without warning.
      Increase the memory setting for virtual memory, and then start printing.
      if this is not helpful, add additional memory to the computer.

    * If a Separator Page is selected, some documents may not print as expected.

    * Please do not change the "Driver" settings on "Advanced" tab.


    (2) Limitation/Notes on Bi-directional Communication
    * Please do not uncheck the "Enable bidirectional support" on "Ports" tab.
    * Please do not block the UDB port 49999.
      When the printer is connected via network, please do not block the port
      4999 of the UDB protocol for in/out traffic.  You may not be able to
      print with the printer if this port is blocked.

    (3) Other Notes
    * An extra page is added to the end of odd-paged duplex jobs. the added
      page might be incremented in the printer's counter.

    * Depending on amount of the memory installed on your computer, printing
      might take longer from an application.  Also, an operating system running
      on insufficient memory might cause an application to discontinue
      printing.

    * General protection violation error might occur depending on the specific
      environments and the type of the printed data.

    * If the document size is reduced with the printer driver's scaling
      function, part of data might not be printed correctly depending on the
      application.

    * Printed result of gray patterns might be different from that on the
      screen, depending on the application.

    * Part of image data on the screen might not be printed depending on the
      application.

    * Depending on the application, there is a possibility that Print Settings
      made on the print setting screen of an application will be lost after
      printing. Therefore, make sure to specify or confirm print settings
      before printing.

    * When printing with "Layout" or "Reduce/Enlarge", line thickness might be
      different depending on the drawing position.

      Paper types that must be set in a unique direction in the tray (opposite
      direction than usual), such as envelopes or prepunched paper, might be
      printed in 180 degree rotation. To change the direction, please use
      "Rotated by 180 degrees".

    * When selecting "Color" from "Color/Black and White" setting in the
      "Setup" tab, black and white document may be printed as a color job,
      depending on application or data. If you want to print a document in
      black and white, select "Black and White" in "Color/Black and White"
      setting.

    * If the printer driver's printer name or the port name is very long, some
      application software may be terminated when the printer is selected or
      the printing is started.  In order to avoid this problem please use the
      shorter printer names and port names.

    * When the "Gradation" setting in Print Quality tab is set to "Speed",
      Duplex printing is off, and the Paper Type is "Plain 1", the printing
      speed may be reduced.

    * In the Accessories tab or Paper Size tab, if the accessories, Input Tray,
      or Paper Size is not updated after clicking "Update Now" button, please
      click the "Update Now" button again.

    * If you turn "ON" the check [Ignore Application Collate], a setting of 
      [Collate] function become effective.

    * When printing for Collate Printing with Microsoft Power Point, please 
      turn "ON" the check [Ignore Application Collate].

    * When you set up an IPP Printer, please set 
      "http://<Printer's IP Address>/ipp/port1" as Printer URL.

========================================================================

All brand names and product names mentioned in this document are trademarks or
registered trademarks of their respective companies.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.53