1. z41641L3.exe Driver
2. MFPCFG.INI File Contents

MFPCFG.INI Driver File Contents (z41641L3.exe)

[INIFiles]
LMABQHPROTOCOL_INI=RAETUHPt.INI
LMABQHTEMP_INI=RAETUHTp.INI
LMABQMFP_PROFILE=RAETUPrf.ini
LMABQSCANNERLIST=RAETUSLT.dat

[RunTime]
IniVersion=0001 		// INI version
FWVersion=0001			// Firmware version
DriverVersion=1.20.0.0
DriverType=1
//DriverType: 1.USB 2.Network 3.Mixed
SensorType=0 			// 0: NEC 8872 	1:TOSHIBA 2953 	2:TOSHIBA 2905
MotorType=0			// 0: 6219


[MODULE_CONFIG]
DRIVER_TYPE=1
MODULE=0
MODULE_NUM=5

MAJOR_VERSION=0
MINOR_VERSION=2
SUB_VERSION_0=0
SUB_VERSION_1=0

NET_PREVIEW_BITMAP={680AA42D-206D-4487-A339-7C3D5EDEDBDB}.bmp
USB_PREVIEW_BITMAP={30F0407A-FA47-42e6-8109-CA2DBD24D7D5}.bmp

[MODULE_NAME]
MFG0=RICOH
MFG1=Generic
MFG2=NRG
MFG3=LANIER
MFG4=RICOH

MODULE0=Aficio SP 3400SF/3410SF
MODULE1=3400SF/3410S
MODULE2=SP 3400SF/3410SF
MODULE3=SP 3400SF/3410SF
MODULE4=IPSiO SP 3410SF

[CONFIG_MODULE_DEFAULT]
NET_COLOR_CFG_INI=COLCFG.INI
NET_PROTOCOL_CONSTANT_INI=PROTCNST.INI
NET_PROTOCOL_CFG_INI=PROTCFG1.INI
NET_TWAINUI_CFG_INI=UICFG.INI
NET_PROFILE_INI=SETCFG.INI
NET_HARDWARE_CFG_INI=HWCFG.INI
NET_SCANNER_LIST=DevList.dat

USB_COLOR_CFG_INI=COLCFG.INI
USB_PROTOCOL_CONSTANT_INI=PROTCNST.INI
USB_PROTOCOL_CFG_INI=PROTCFG1.INI
USB_TWAINUI_CFG_INI=UICFG.INI
USB_PROFILE_INI=SETCFG.INI
USB_HARDWARE_CFG_INI=HWCFG.INI
USB_SCANNER_LIST=DevList.dat

NET_ALIAS_CFG_INI=COLCFG.INI
NET_ALIAS_PROTOCOL_CONSTANT_INI=PROTCNST.INI
NET_ALIAS_PROTOCOL_CFG_INI=PROTCFG1.INI
NET_ALIAS_TWAINUI_CFG_INI=UICFG.INI
NET_ALIAS_PROFILE_INI=SETCFG.INI
NET_ALIAS_HARDWARE_CFG_INI=HWCFG.INI
NET_ALIAS_SCANNER_LIST=DevList.dat

USB_ALIAS_COLOR_CFG_INI=UCOLCFG.INI
USB_ALIAS_PROTOCOL_CONSTANT_INI=UPROTCNST.INI
USB_ALIAS_PROTOCOL_CFG_INI=UPROTCFG.INI
USB_ALIAS_TWAINUI_CFG_INI=TWUICFG.INI
USB_ALIAS_PROFILE_INI=SETCFG.INI
USB_ALIAS_HARDWARE_CFG_INI=HWCFG.INI
USB_ALIAS_SCANNER_LIST=DEVICE_LIST

DRV_RTSCAN_X32=RtScan32.dll
DRV_VICEO_X32=Viceo32.dll
DRV_RTSCAN_X64=RtScan64.dll
DRV_VICEO_X64=Viceo64.dll
DRV_TWUI=TwainUI.dll
DRV_TWSET=TwainSet.dll

[Debug]
DumpMessage=1			// Dump debug message. 1:Enable; 0:Disable.
DumpLogFile=1			// Dump to log file. 1:Enable; 0:Disable.
DumpMotorStepLogFile=0		// Dump motor step to log file. 1:Enable; 0:Disable.
ShowLeadingPositionBox=0	// 1: show; 0: disable
DumpRawImage=0                  // Dump debug image. 1:Enable; 0:Disable.
showscantime=0                  // 1: show; 0: disable

[DeviceID]
DeviceID0=Vid_05CA&Pid_041A
DeviceID1=Vid_05CA&Pid_041B

[LUT]
DefaultLUTFileEnable=1		// 1: Combine this LUT;		0: Bypass this LUT.
FLB_300_LUT=C600.plg		// Gamma mapping file for fletbed 300 dpi.
FLB_600_LUT=C600.plg		// Gamma mapping file for fletbed 600 dpi.
FLB_1200_LUT=C1200.plg		// Gamma mapping file for fletbed 1200 dpi.
CmFileNameRef=CMBEDCAF.bmp
CmFileNameAdf=CMADFCRF.bmp


[Property]
HIGH_BUFFER_SIZE=1048576	// Ring Buffer size
HIGH_BUFFER_NUM=12		// The number of buffer
MEDIUM_BUFFER_SIZE=1024000	// Ring Buffer size
MEDIUM_BUFFER_NUM=16		// The number of buffer
LOW_BUFFER_SIZE=256000		// Ring Buffer size
LOW_BUFFER_NUM=30		// The number of buffer