1. z43027en.exe Driver
2. README2.TXT File Contents

README2.TXT Driver File Contents (z43027en.exe)

README SUPPLEMENT FOR PS DRIVERS

--------------------------------------------------------------------
    SUPPORTED MODELS
--------------------------------------------------------------------
- Windows 2000/XP/Server 2003/Vista/Server 2008/7/Server 2008 R2(*)
   Printer Unit Type80 RCP80

  (*)This driver can be used for 64bit edition, 
     except Itanium-based systems.

--------------------------------------------------------------------
    NOTE
--------------------------------------------------------------------
- Installing the printer driver 
     in Windows 2000/XP/Server2003/Vista/Server 2008/7/Server 2008 R2

 Refer to "Printer Reference" for the details of installation 
 in other operation system.

 (1)Click [Start] on the taskbar, point to [Settings], and then click
   [Printers(Printers and Faxes)].
   Under Windows 7 or Windows Server 2008 R2, click [Start] on the 
   taskbar, and then click [Devices and Printers].

   Double-click the [Add Printer] icon. [Add Printer Wizard] starts.

 (2)Click [Local Printer], and then click [Next].

 (3)Select the port you want to use, and then click [Next].

 (4)Click [Have Disk]. The Install From Disk dialog box is displayed.
  In the Install From Disk dialog box, type the letter for the driver
  which contains the installation diskette and click [OK].

 (5)Select the model of the printer you are using, and then click [Next].

 (6)Follow the instructions on the screen.
  If the [Digital Signature Not Found(Hardware Installation)] dialog
  box appears, click [Yes(Continue Anyway)], and continue the
  installation.


- Uninstalling PS printer driver
     in Windows 2000/XP/Server2003/Vista/Server 2008/7/Server 2008 R2

 Refer to "Printer Reference" for the details of installation 
 in other operation system.

 (Windows 2000/XP/Server 2003)
  (1)Open "Control Panel" -> "Printers".
  (2)Delete the printer icon.
  (3)Select "File" -> "Server Properties".
  (4)Select "Drivers" tab.
  (5)Select a driver from "Installed printer drivers" and push the Remove 
     button.
  (6)Restart your computer.

 (Windows Vista/Server 2008)
  (1)Open "Control Panel" -> "Printers".
  (2)Selct the printer icon.
  (3)Click right button -> "Run as administrator" -> "Delete".
  (4)Click right button -> "Run as administrator" -> "Server Properties".
  (5)Select "Drivers" tab.
  (6)Select the driver from "Installed printer drivers" and push the Remove 
     button.
  (7)Select "Remove driver and driver package.".
  (8)Restart your computer.

 (Windows 7/Server 2008 R2)
  (1)Open "Devices and Printers" from "Start" menu.
  (2)Right-click the printer icon, and click "Remove device".
  (3)Select any printer, and click "Print server properties" on Command bar.
  (4)Select "Drivers" tab in "Print server properties".
  (5)Select the driver from "Installed printer drivers".
  (6)Click "Remove" button, and select "Remove driver and driver package." 
  (7)Restart your computer.


- Additional information

1. Note for HP LJ8100 users.
The older Hewlett Packard LaserJet 8100 PCL 6 driver may interfere with 
the PostScript driver.  To avoid this problem use LaserJet 8100 PCL6 driver 
V4.3.2.38 or later.

2. Collation
When printing multiple copies, turn off collation in the application and 
turn "Collate" on, on the "DeviceOption" tab.  With some applications, 
collation may significantly slow down your computer.  And, some functions 
may not work correctly.

3. Collation
(Windows 2000/XP/Server 2003/Vista/Server 2008/7/Server 2008 R2)
Though "Collated" check box becomes available after setting multiple 
numbers of copies by "Copy Count:" in "Advanced Options" dialog, 
be sure to set "Collated" check box OFF in performing printing.
Collate function must be set by "Document Options" - "Printer Features"-
"Collate" in "Advanced Options" dialog. 

4. Printing from NetScape4.7
(Macintosh)
In Printing with NetScape 4.7, it may cause gridlock and the termination 
of the application in use.
If you use NetScape, be sure to use NetScape 6 or later. 

5. MS Word98 document with mixed orientation.
(Macintosh)
Printing of Macintosh MS Word98 document with mixed paper orientation may 
produce unexpected result if multiple copies, staple, or duplex is selected.

6. Printing from PageMaker
(Macintosh)
When printing a document from Macintosh PageMaker, the printer may show 
"Load Letter" on the operation panel and wait for letter paper.  
In order to avoid this wait, set letter paper in one of the input tray, or 
turn off Macintosh "Background Print".  
(Note you have to turn off "Background Print" from the Finder.)

7. Watermark and QuarkXpress 4.1
(Windows 95/98/Me, Macintosh)
QuarkXpress 4.1 document may not be printed as expected if Watermark 
is selected. 

8. Custom Size Setup
(Windows NT4.0/2000/XP/Server 2003/Vista/Server 2008/7/Server 2008 R2)
Warning dialog may be displayed even though entering the values within 
maximum and minimum available values for custom size specified in custom 
size setup dialog. In this case, please reduce the values to be less than 

the entered values even if they are within the available range.

9. Printing Custom Size Document from MS-Word
(Windows NT4.0/2000/XP/Server 2003/Vista/Server 2008/7/Server 2008 R2)
When printing MS Word document using Custom Size, the document may not as 
expected.

10. Printing Custom Size Document from Acrobat
(Windows 95/98/Me)
Neither Acrobat 5 nor Acrobat Reader 5 can not use "Other Custom Paper". 
Use other custom size selection.

11. Data Format
(Windows 95/98/Me/NT4.0/2000/XP/Server 2003/Vista/Server 2008/7/Server 2008 R2)
Be sure to select "ASCII" to perform "Data format"(Windows 9x) or 
"Output Protocol"(Windows NT4/2000/XP).
If set to "BCP" or "Binary" to perform above operation, it may cause 
PS error or incorrect setting of numbers of copies.

12. Custom Size setting
(MacOSX Classic Mode)
If click "OK"button without naming Custom Size newly created on MacOSX 
Classic Mode, application may be terminated.
When set Custom Size on MacOSX Classic Mode, be sure to enter the newly 
created Custom Size name before click "OK" button. 

13. Printing from PageMaker
(Macintosh)
If print with "User Code" with the application except PageMaker 
and print with PageMaker after that, the previous setting of  "User Code"
is succeeded to the next printing with PageMaker.

14.Form To Tray Assignment
(Windows NT4/2000/XP/Server2003/Vista/Server 2008/7/Server 2008 R2)
Do not select "Form To Tray Assignment" item in "Device setting" tab.

15. Page Layout (N-up) function
(Windows NT4.0)
Page Layout (N-up) function does not work with MS-Word2002.

16. Disorder when pressing "Stop"button in using MacOSX Classic Mode 
(Macintosh)
If stop printing with "Stop" button in using the printer with MacOSX 
Classic Mode, sometimes printer freezes with "Waiting..." status.