************************************************************************ SOFTWARE LICENSE AGREEMENT YOU, THE END USER, SHALL USE THIS SOFTWARE("THE SOFTWARE") ACCORDING TO THE TERMS OF THIS AGREEMENT. BY LOADING THE SOFTWARE INTO ANY COMPUTER, YOU ARE AGREEING TO BE BOUND BY THESE TERMS. IF YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT, YOU MAY NOT LOAD THIS SOFTWARE INTO ANY COMPUTER. Grant of License The Software is licensed for use by you for the equipment packaged with the Software or designated by its supplier ("the equipment"). You are permitted to use the Software on any computer which permits electronic access to the equipment. You are not permitted to rent or lease the Software or to transfer your rights under this license to a third party. Acceptance You shall be deemed to have accepted the terms of this Agreement by loading the Software into any computer. Duration This license is effective until terminated. The license will terminate where you fail to comply with the terms of this Agreement. Upon termination, you agree to destroy all copies of the Software and its documentation. Ownership of Software You own, if any, only the magnetic media on which the Software has been delivered. It is an express condition of this Agreement that the title and ownership of the Software shall be retained by its owners. Copying The Software and its documentation are the subject of Copyright. You may not make any copies nor cause others to make copies of the Software except such copies as are necessary for licensed use and one copy for operational security. Any such copies are subject to the conditions of this Agreement. You may not modify, adapt, merge, translate, reverse engineer, decompile, disassemble or create derivative works based on the whole or any part of the Software or its associated documentation. You may be held legally responsible for any copyright infringement, unauthorized transfer, reproduction or use of the Software or its documentation. Limitation of Warranty The media, if any, not the Software contained therein, is warranted to the original purchaser against defects in material and workmanship for a period of one year from the date of original purchase. Defective media will be replaced when it is returned to your supplier, postage prepaid, along with a copy of the purchase receipt. THESE RIGHTS ARE YOUR SOLE AND EXCLUSIVE REMEDY, WHETHER IN TORT, CONTRACT, OR OTHERWISE. IN NO EVENT SHALL SUPPLIER, OWNER OF THE SOFTWARE OR ITS LICENSORS BE LIABLE FOR DAMAGES (INCLUDING ANY FOR LOSS OF INFORMATION, PROFITS, SAVINGS OR BUSINESS INTERRUPTION OR OTHER DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES) ARISING OUT OF THE SOFTWARE OR THE USE THEREOF, OR THE INABILITY TO USE THE SOFTWARE. Exporting Law You acknowledge that the export of the Software is governed by the export control laws of the United States and other countries. You agree to comply with all such export control laws. Governing Law and Jurisdiction If any provision or portion of this Agreement shall be found to be illegal, invalid or unenforceable, the remaining provisions shall remain in full force and effect. This Agreement shall be governed by the laws of California, USA and is subject to the jurisdiction of the Federal District courts for the Central District of California by a judge and not a jury. ************************************************************************ ======================================================================== Microsoft Windows 2000/XP/Vista(x86/x64) PCL Printer Driver ======================================================================== Introduction This readme file contains information about using PCL printer driver for Windows 2000/XP/Server2003/Vista/Server2008. Please make sure to read this before installing PCL printer driver. <Contents> [1]How to install PCL printer driver (1)Installing PCL printer driver at the first time (2)Uninstalling PCL printer driver (3)Updating PCL printer driver (4)Notes [2] Limitation/Notes in using PCL printer driver (1)Limitation/Notes in printing ======================================================================== [1]How to install PCL printer driver (1) Installation steps for Windows2000/XP/Server2003/Vista/Server2008 driver If you are installing this product at the first time, please follow these steps; * Make sure to close all applications before installing. -1 Start Windows and log on as Administrators or Power Users. -2 When using a driver downloaded from the Internet: After downloading the driver from the Internet, extract the file(s) to a folder of your choice. -3 From the [Start] menu, point to [Settings] or [Control Panel], then click [Printers] or [Printers and Faxes]. In the printer folder double click [Add Printer] (it may be in [Printer Tasks]), and click "Next >". -4 Follow the Wizard guidance and select a printer connection method (My Computer or Network Printer Server / Local or Network Printer), then click "Next >" to continue. -5 The following explanation applies when the user has selected a [Local] connection method. Please select the port to connect the printer, and click "Next>" to continue. -6 Specify the folder of the driver files. A) To install the downloaded driver, click [Have Disk] then [Browse] to locate the folder where you had extracted the downloaded driver, from this folder select Disk 1, then click "OK". B) To install from the CD, insert the CD-ROM into the CD ROM drive, [Have Disk] button in "Manufacturers:" / "Printers:" window, then enter the path (e.g. D:\DRIVERS\PCL6\XP_VISTA\DISK1\) of the designated drive then click "OK". (You can also navigate to the drive by clicking the [Browse] button.). -7 Select the printer to use. After selecting, click "Next >". -8 Specify printer name. And if you want to use installed printer as the default printer, check "Yes". After specifying, click "Next >". -9 If you want to share installed printer with other network users, indicate and set sharing. After above, click "Next >". -10 Print test page to confirm that the printer is set up properly. Check on "Yes(recommended)", then click "Finish", and finally, the installation is completed. After completing above operation, you can use PCL printer driver for Windows 2000/XP/Server2003/Vista/Server2008. (2) Uninstalling PCL printer driver. * Make sure to close all applications before uninstalling. - 1 Open [Printers] or [Printers and Faxes] folder in [Settings] or [Control Panel] from [Start] menu. - 2 Select the printer you want to uninstall. - 3 Press [Delete] key - 4 Select "Driver" tab in server property from file menu in printer folder. - 5 Select the driver you want to uninstall. - 6 Press [Delete] key If you are using Windows Vista, you are asked to choose "Remove driver only" or "Remove driver and driver package". Please choose the latter. (3) Updating PCL printer driver Please follow these installation steps to update the printer driver from old version to new version; - 1 Uninstall the printer driver with the same steps as (2) "Uninstalling PCL printer driver" - 2 Install new version of the PCL printer driver with the same step as (1) "Installing at the first time." After completing above operation, you can use printer driver of new version. (4) Notes -1 During the printer driver installation, Windows may alert that Windows can't verify the publisher of this driver. However, the printer driver functionality is not affected. Please continue the installation. [2] Limitation/Notes in using PCL printer driver (1) Limitation/Notes in printing [Windows functions] * If virtual memory on a Windows operating system is set lower than usual, insufficient memory errors will occur and drawing operations in applications or printer drivers will not perform properly. Documents might not print correctly or the following problems might occur: - Low memory warnings. - Application errors. - Printing discontinues without warning. Increase the memory setting for virtual memory, and then start printing. if this is not helpful, add additional memory to the computer. * If a Separator Page is selected, some documents may not print as expected. * Please do not change the "Driver" settings on "Advanced" tab. (2) Limitation/Notes on Bi-directional Communication * Please do not uncheck the "Enable bidirectional support" on "Ports" tab. * Please do not block the UDB port 49999. When the printer is connected via network, please do not block the port 4999 of the UDB protocol for in/out traffic. You may not be able to print with the printer if this port is blocked. (3) Other Notes * An extra page is added to the end of odd-paged duplex jobs. the added page might be incremented in the printer's counter. * Depending on amount of the memory installed on your computer, printing might take longer from an application. Also, an operating system running on insufficient memory might cause an application to discontinue printing. * General protection violation error might occur depending on the specific environments and the type of the printed data. * If the document size is reduced with the printer driver's scaling function, part of data might not be printed correctly depending on the application. * Printed result of gray patterns might be different from that on the screen, depending on the application. * Part of image data on the screen might not be printed depending on the application. * Depending on the application, there is a possibility that Print Settings made on the print setting screen of an application will be lost after printing. Therefore, make sure to specify or confirm print settings before printing. * When printing with "Layout" or "Reduce/Enlarge", line thickness might be different depending on the drawing position. Paper types that must be set in a unique direction in the tray (opposite direction than usual), such as envelopes or prepunched paper, might be printed in 180 degree rotation. To change the direction, please use "Rotated by 180 degrees". * When selecting "Color" from "Color/Black and White" setting in the "Setup" tab, black and white document may be printed as a color job, depending on application or data. If you want to print a document in black and white, select "Black and White" in "Color/Black and White" setting. * If the printer driver's printer name or the port name is very long, some application software may be terminated when the printer is selected or the printing is started. In order to avoid this problem please use the shorter printer names and port names. * When the "Gradation" setting in Print Quality tab is set to "Speed", Duplex printing is off, and the Paper Type is "Plain 1", the printing speed may be reduced. * In the Accessories tab or Paper Size tab, if the accessories, Input Tray, or Paper Size is not updated after clicking "Update Now" button, please click the "Update Now" button again. ======================================================================== All brand names and product names mentioned in this document are trademarks or registered trademarks of their respective companies.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.