README.TXT Driver File Contents (r40398en.exe)

********************************************************************
SOFTWARE LICENSE AGREEMENT

YOU, THE END OF USER, SHALL USE THIS SOFTWARE ("THE SOFTWARE")
ACCORDING TO THE TERMS OF THIS AGREEMENT. BY LOADING THE SOFTWARE
INTO ANY COMPUTER, YOU ARE AGREEING TO BE BOUND BY THESE TERMS.
IF YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT, YOU MAY NOT LOAD
SOFTWARE INTO ANY COMPUTER.

1.Microsoft Corporation("Microsoft") and Ricoh Co., Ltd.("Ricoh")
retain all right, title and interest in and to the Software and
its copies.
2.Ricoh grants you the non-exclusive right to use the Software with
the printers listed in the "SUPPORTED MODELS" below.
the Ricoh printers.
3.THE SOFTWARE IS PROVIDED AS IS WITHOUT ANY WARRANTY OF ANY KIND.
4.IN NO EVENT SHALL MICROSOFT, RICOH, OR ITS LICENSORS BE LIABLE
FOR DAMEGES (INCLUDING ANY FOR LOSS OF INFORMATION, PROFITS,
SAVINGS OR BUSINESS INTERRUPTION OR OTHER DIRECT, INDIRECT,
INCIDENTIAL, CONSEQUENTIAL OR SPECIAL DAMAGES) ARISING OUT OF
THE SOFTWARE OF THE USE THEREOF, OR THE INABILITY TO USE THE
SOFTWARE.
5.You acknowledge that the export of the Software is governed by
the export control laws of the United States, Japan, and other
countries. You agree to comply with all such export control laws.
********************************************************************

--------------------------------------------------------------------
Microsoft Windows Vista/Windows Server 2008/Windows 7
XPS driver Readme
2009/10
--------------------------------------------------------------------
This driver can also be used for 64-bit editions of Windows.

Contents
SYSTEM REQUIREMENTS
INSTALLATION
NOTE

- Supported operating systems
This driver operates for the following OSs.
Windows Vista (SP1 or later recommended)
Windows Server 2008
Windows Server 2008 R2
Windows 7

- Installation
(1) From the Windows desktop, click Start,select Control Panel, and then
double-click Printers. Double-click the Add Printer icon to launch the
Add Printer Wizard.

(2) Select either "Add a Local printer" or "Add a Network, wireless, or
Bluetooth printer." If you select "Add a Local printer," select a printer
port by clicking the corresponding checkbox, and then click "Next".
If you select "Add a Network, wireless, or Bluetooth printer," select the
desired network printer, and then click "Next."

(3) Click "Have Disk". The Install From Disk dialog box is displayed.
In the Install From Disk dialog box, type the letter for the drive which
contains the installation package, and then click "OK". A list of available
printers will be displayed. Select your printer from the list, and then
click "Next."

(4) Follow the on-screen instructions of the printer wizard. A dialog box will
appear with the text, "Windows can't verify the publisher of this driver
software." When this dialog box appears, click "Install this driver software anyway,"
and continue the installation.

- Note
* The XPS driver will only work with Vista applications that support XPS printing.

* To actually use accessories for the printer such as an additional paper
source tray, the installed accessories have to be defined on the Properties
page of the printer. Please follow the steps below to configure your printer's
accessories.

(1) From the Windows desktop, click Start, select Control Panel, and then
double-click Printers.
(2) Right-click the icon for your printer, and then click Properties.
(3) On the Device Settings tab, under Installable Options, click the
accessories that have been installed with your printer.

Installed accessories can be set automatically by performing the following
steps.

(1) From the Windows desktop, click Start, select Control Panel, and then
click Printers.
(2) Right-click the printer you want to make it available, and then click
Properties.
(3) On the Device Settings tab, under Installable Options, select
"Implement by Update Now" in "Specify Automatic Configuration."
When the update is complete, the updated settings will be displayed in bold.
Click "Apply" to save the updated settings.

* A yellow "!" icon is displayed when a setting that is unavailable for your
printer has been selected. Please modify the settings that have a yellow
"!" icon displayed.

* In the printer Properties dialog, under Feed Direction in the Device Settings
tab, please select a paper direction setting that matches your device's actual
configuration. Selecting a setting that is different from the actual device
configuration will slow down the printing process.

* It may take some time for the printer Properties page to be displayed from
the Printer Folder.

* If your printer has a sort function, this setting can be enabled by configuring
a corresponding setting from within an application's print dialog box.
For example, in Microsoft Word, the sort function can be enabled by enabling
the "Collate" option from the print dialog.

* Please create custom paper sizes by using the Windows Print Server settings.
The procedure is as follows.

(1) From the Windows desktop, click Start, select Control Panel, and then
click Printers.
(2) Without selecting a printer, right-click the Printers and Faxes window,
and then click "Server Properties".
(3) In the Forms tab, click "Create a new form." Specify the custom paper
size measurements and a name for the form, and then click "Save Form."

When using custom paper sizes, please select the appropriate tray from the
"Paper Source" setting in "Printing Preferences" - "Paper/Quality". If
"Auto Tray Select" is selected, the custom size paper might not be correctly
fed into the printer.

* The Paper available in the General tab will always be Letter or A4
regardless of the paper in the printer or the settings in the driver.

* Lines might be omitted from jobs if they are less than 1 pixel in width.

* To avoid possible jams, custom paper sizes should be positioned in the tray
so that they are fed short edge first.

* The Client drivers can not be installed on the Server PC for Point & Print
under a specific set of conditions. This only happens if the either the client
or server is x64 and the other is x86.

* Automatic configuration of printer accessories might result in an error.
However, the error can immediately be resolved by pressing the Apply button.

* Black and White documents might be printed in full color (CMYK). To ensure
that the job prints using pure Black (K), please change the Color Printing Mode
to "Monochrome".

Trademark Notices: MicrosoftR and WindowsR are registered trademarks of
Microsoft Corporation in the United States and/or other countries.

- Copyright Information about Installed Applications

* expat XML parser

Expat XML parser; version 1.95.8; http://www.libexpat.org
Inline Copyright Agreement (from http://www.jclark.com/xml/copying.txt)

Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including without
limitation the rights to use, copy, modify, merge, publish, distribute,
sublicense, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to the following
conditions:

The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.

* PNG

Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant

and with the following additions to the disclaimer: There is no warranty against interference with
your enjoyment of the library or against infringement. There is no warranty that our efforts or the
library will fulfill any of your particular purposes or needs. This library is provided with all faults, and
the entire risk of satisfactory quality, performance, accuracy, and effort is with the user.

libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999,
2000 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as
libpng-0.96, with the following individuals added to the list of Contributing Authors:

Tom Lane
Glenn Randers-Pehrson
Willem van Schaik

libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas
Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following
individuals added to the list of Contributing Authors:

John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner

libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric
Schalnat, Group 42, Inc.

For the purposes of this copyright and license, "Contributing Authors" is defined as the following set
of individuals:

Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner

The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc.
disclaim all warranties, expressed or implied, including, without limitation, the warranties of
merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume
no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may
result from the use of the PNG Reference Library, even if advised of the possibility of such damage.
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions
hereof, for any purpose, without fee, subject to the following restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not be misrepresented as being the
original source.
3. This Copyright notice may not be removed or altered from any source or altered source
distribution. The Contributing Authors and Group 42, Inc. specifically permit, without fee, and
encourage the use of this source code as a component to supporting the PNG file format in
commercial products. If you use this source code in a product, acknowledgment is not required
but would be appreciated.

* TIFF

Permission to use, copy, modify, distribute, and sell this software and its
documentation for any purpose is hereby granted without fee, provided
that (i) the above copyright notices and this permission notice appear in
all copies of the software and related documentation, and (ii) the names
of Sam Leffler and Silicon Graphics may not be used in any advertising
or publicity relating to the software without the specific, prior written
permission of Sam Leffler and Silicon Graphics.

THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF
ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR
NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY
THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH
THE USE OR PERFORMANCE OF THIS SOFTWARE.

TIFF Library UNIX-specific Routines. These should also work with the
Windows Common RunTime Library.

* FreeType

* SMALLOC

This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software. Permission is granted to anyone to
use this software for any purpose, including commercial applications,
and to alter it and redistribute it freely, subject to the following
restrictions:

1. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and
must not be misrepresented as being the original software.

3. This notice may not be removed or altered from any source
distribution.

* JPEG

This software is based in part on the work of the Independent JPEG Group.

* math

Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is preserved.

* zlib

Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied warranty.

In no event will the authors be held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented;
you must not claim that you wrote the original software.
If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

* xpm

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESSOR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, *FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL GROUPE BULL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS THE SOFTWARE.

* Incl

Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including without
limitation the rights to use, copy, modify, merge, publish distribute,
sublicense, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to the following
conditions:

The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
SUNSOFT, INC. OR ITS PARENT COMPANY BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of SunSoft, Inc. shall not be
used in advertising or otherwise to promote the sale, use or other
dealings in this Software without written authorization from SunSoft Inc.

* bldimake

Permission to use, copy, modify, distribute, and sell this software and its
documentation for any purpose is hereby granted without fee, provided
that the above copyright notice appear in all copies and that both that
copyright notice and this permission notice appear in supporting
documentation. The above copyright notice and this permission notice
shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH
THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

Except as contained in this notice, the name of The Open Group shall
not be used in advertising or otherwise to promote the sale, use or other
dealings in this Software without prior written authorization from The
Open Group.

Download Driver Pack

README.TXT Driver File Contents (r40398en.exe)

Recent Help Articles

More Popular Downloads

How To Update Drivers Manually

Recent Help Articles

More Popular Downloads