=======================================================================
RP-GL/2 HDI Printer Driver Ver1.16 for AutoCAD(LT) 2010(32bit)
'10. 06. 25 RICOH Co., Ltd.
=======================================================================
(C) Copyright 2010 RICOH Co., Ltd.
=======================================================================
<Introduction>
This product is the RP-GL/2 HDI Printer Driver for printing from
AutoCAD(LT) 2010(32bit).Please read and understand this document
before using the RP-GL/2 HDI Printer Driver.
------------------------------------------------------------------------
SOFTWARE LICENSE AGREEMENT
YOU, THE END USER, SHALL USE THIS SOFTWARE("THE SOFTWARE") ACCORDING TO
THE TERMS OF THIS AGREEMENT.
BY LOADING THE SOFTWARE INTO ANY COMPUTER, YOU ARE AGREEING TO BE BOUND
BY THESE TERMS. IF YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT, YOU
MAY NOT LOAD THIS SOFTWARE INTO ANY COMPUTER.
Grant of License
The Software is licensed for use by you for the equipment packaged with
the Software or designated by its supplier ("the equipment"). You are
permitted to use the Software on any computer which permits electronic
access to the equipment. You are not permitted to rent or lease the
Software or to transfer your rights under this license to a third party.
Acceptance
You shall be deemed to have accepted the terms of this Agreement by
loading the Software into any computer.
Duration
This license is effective until terminated. The license will terminate
where you fail to comply with the terms of this Agreement. Upon
termination, you agree to destroy all copies of the Software and its
documentation.
Ownership of Software
You own, if any, only the magnetic media on which the Software has been
delivered. It is an express condition of this Agreement that the title
and ownership of the Software shall be retained by its owners.
Copying
The Software and its documentation are the subject of Copyright.
You may not make any copies nor cause others to make copies of the
Software except such copies as are necessary for licensed use and one
copy for operational security. Any such copies are subject to the
conditions of this Agreement.
You may not modify, adapt, merge, translate, reverse engineer, decompile,
disassemble or create derivative works based on the whole or any part of
the Software or its associated documentation.
You may be held legally responsible for any copyright infringement,
unauthorized transfer, reproduction or use of the Software or its
documentation.
Limitation of Warranty
The media, if any, not the Software contained therein, is warranted to
the original purchaser against defects in material and workmanship for
a period of one year from the date of original purchase. Defective media
will be replaced when it is returned to your supplier, postage prepaid,
along with a copy of the purchase receipt.
THESE RIGHTS ARE YOUR SOLE AND EXCLUSIVE REMEDY, WHETHER IN TORT,
CONTRACT, OR OTHERWISE. IN NO EVENT SHALL SUPPLIER, OWNER OF THE SOFTWARE
OR ITS LICENSORS BE LIABLE FOR DAMAGES (INCLUDING ANY FOR LOSS OF
INFORMATION, PROFITS, SAVINGS OR BUSINESS INTERRUPTION OR OTHER DIRECT,
INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES) ARISING OUT OF
THE SOFTWARE OR THE USE THEREOF, OR THE INABILITY TO USE THE SOFTWARE.
Exporting Law
You acknowledge that the export of the Software is governed by the export
control laws of the United States and other countries. You agree to
comply with all such export control laws.
Governing Law and Jurisdiction
If any provision or portion of this Agreement shall be found to be
illegal, invalid or unenforceable, the remaining provisions shall remain
in full force and effect. This Agreement shall be governed by the laws
of California, USA and is subject to the jurisdiction of the Federal
District courts for the Central District of California by a judge and
not a jury.
------------------------------------------------------------------------
<Requirements>
The RP-GL/2 HDI Printer Driver is supported in any environment supported
by AutoCAD.
There are no other specific requirements. RP-GL/2 HDI Printer Driver for
AutoCAD(LT) 2010(32bit) will not work with any AutoCAD versions except
AutoCAD(LT) 2010(32bit).
If you are using another version of AutoCAD, please do not use this
RP-GL/2 HDI Printer Driver for AutoCAD(LT) 2010(32bit).
Instead, please select the appropriate RP-GL/2 HDI Printer Driver.
Note: We have not released any drivers for AutoCAD R14, AutoCAD LT98,
or earlier.
<RP-GL/2 HDI Printer Driver Installation>
Prior to installation of the RP-GL/2 HDI Printer Driver:
1) Install a regular printer driver (PS, PCL, or RPCS). This will be
used for spooling of jobs and creation of ports.
This can be any driver however a tcp/ip port should be used.
Other port types might produce unusual results and are therefore
not supported.
2) Remove all previous versions of the RP-GL/2 HDI Printer Driver.
Note: This includes previous versions of RP-GL/2 HDI Printer Drivers
for other versions of AutoCAD.
3) AutoCAD(LT) 2010(32bit) should already be installed on the
system.
Procedure:
-1 Start -> Settings -> Control Panel
-2 Open the "Autodesk Plotter Manager".
Note: This will only be visible if AutoCAD has already been installed.
-3 Open the "Add-A-Plotter" wizard and click Next.
-4 Select "My Computer" and click Next.
-5 Click on "Have Disk" and browse to the folder containing the RP-GL/2
HDI Printer Driver.
-6 Select a driver to install and click Open.
-7 Browse through the list of Manufacturers to find Ricoh Co. Ltd.
-8 Select your model and click Next.
-9 If you have print settings from a previous plotter saved to a pcp or
pc2 file, they can be imported now by clicking
the <> button. After finishing this step, click next.
-10 Select "Plot to a port" and select the port you wish to plot to and
click Next.
Note: Ports marked "local port" are not supported.
-11 Enter a name for the plotter and click Next..
-12 Follow the messages of the "Add-A-Plotter" wizard.
<RP-GL/2 HDI Printer Driver Uninstallation>
Procedure:
-1 Start -> Settings -> Control Panel
-2 Open the "Autodesk Plotter Manager".
Note: This will only be visible if AutoCAD has already been installed.
-3 Right click on the driver you want to uninstall and select "Delete".
-4 Click OK to confirm the deletion.
Steps 5 - 7 are only necessary if another RP-GL/2 HDI Printer Driver
already exists on the system.
-5 Open the "drv" folder within AutoCAD.
E.g. C:\Program Files\AutoCADLT2010\drv
-6 Delete "RPGL2_#.drc", "RPGL2_#.hdi", and "RPGL2_#Res.dll". (# varies
depending on the version of driver)
-7 Install the version that matches that AutoCAD version.
=======================================================================
For more information, please see the product documentation or help files.
=======================================================================
Autodesk, AutoCAD, AutoCAD LT, Heidi are trademarks, registered trademarks,
or service marks of Autodesk, Inc. in the United States.
Microsoft Windows is a trademark of Microsoft Corporation in the United States.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.