####################################################################### # Silicon Image SiI SATA controller # # Linux Driver # ####################################################################### 1. OVERVIEW This driver disk adds support for the SiI SATA controller. This driver overrides the Open Source Driver Supported Versions: * RedHat Linux 9.0 2. CREATE FLOPPY dd if=redhat_sii6512.img of=/dev/fd0 (In a Linux System) See Full Install if you want to use WINDOWS to create the floppy => Configure RAID SET using the BIOS if you want RAID functionality 3. INSTALL SOFTWARE . Insert Bootable CDROM . At boot prompt type 'linux dd hde=nopobre hdg=noprobe' (2 hard drives) RedHat 9.0 requires kernel to disable the Open Source Driver if your hardware has multiple controllers then type (4 hard drives) 'linux dd hde=nopobre hdg=noprobe hdi=noprobe hdk=noprobe' . Insert Floppy Containing the Driver and follow the installation instructions. * If you get Any Errors or 'hangs' before formatting the Disk Drives see Full Installation. (type CTL-ALT-F4 and CTL-ALT-F5 to see errors, CTL-ALT-F1/F7 are main menus) // changing the RAID from Stripe RAID 0 to mirror RAID 1 may cause this problem * Watch out for typos. Anaconda just ignores them will not disable the Open Source Driver . If you are using GRUB you MUST create a BOOTABLE diskette when prompted (If you are using LILO as the loader you have a choice of creating or NOT creating a bootable diskette.) * Do NOT forget to eject the Original Floppy containing the Driver . Reboot . Reboot using the Bootable diskette At Boot time type: 'linux hde=noprobe hdg=noprobe' or 'linux hde=noprobe hdg=noprobe hdi=noprobe hdk=noprobe' (4 hard drives) . LILO without diskette At Boot time type ctrl-x : 'linux hde=noprobe hdg=noprobe' or 'linux hde=noprobe hdg=noprobe hdi=noprobe hdk=noprobe' . Continue with normal installation. . Eject the BOOT floppy and PUT BACK the floppy containing the DRIVER . Before rebooting get a console window (Wait until Red Hat is done with installation) 'mount /mnt/floppy' cd /mnt/floppy run 'sh redhat_9.0_update_boot_loaders.sh' * This script assumes your boot disk is /dev/sda (first controller) See Full Install for details NOTE: . To UPGRADE or to just add 'DATA' SATA disk drives see Full Install instructions. 4. GENERAL INFO . If you cat /proc/scsi/SiI6512/* you should see the Driver as reported by the kernel . If you cat /proc/scsi/scsi you should see the your RAID TYPE as reported by the kernelDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.