MosChip DOS installer version 1.00.025 dated 19-NOV-2006. ************************************************* Usage : NmDosIn [<options>] By default, NmDosIn displays COM/LPT ports. Options : ******* -a[dd] = Add Moschip Ports -c[onfig]:<parameters> = Configure Moschip Ports -d[elete] = Delete Moschip Ports -r[emap] = Remap Moschip ports to legacy ports -s[ilent] = Silent mode -t[est] = Test ports (requires external Loop-Back plugs) -u[nused] = remap to all Unused legacy port i/o base, without consideration of COM/LPT number -f = remapping to customize I/O addresses. Procedure for Installing and Re-mapping the Moschip ports: ********************************************* Step 1: Type "nmdosin -a" to add moschip ports. Step 2; For remapping moschip ports to legacy ports type :nmdosin -a -f" Steps to remap the customized I/O address: ********************************* Step 1: Copy "NMCONFIG.CFG and NMDOSIN.EXE" files to Hard disk. Step 2: Type "edit nmconfig.cfg" and change I/O address as per your requirement. Save the file and close it. Step 3: Use "nmdosin -a -f" to configure port.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.