92HDM4-1.INI Driver File Contents (IDT_Audio_w7.zip)

[Actions]
None
[Models]
Default=this
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\IDT=yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\IDT Audio=yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\IDT Audio1=yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\IDT Audio2=yes
HKCU\Software\Microsoft\Multimedia\Sound Mapper=Yes
[Apps]
[CopyFiles]
sttray.exe = 0x24
IDTSG.cpl = 0x25
stlang.dll = 0x25
stacsv.exe = 0x25
stacapi.dll = 0x25
[StartServices]
STacSV -r
[StartPrograms]
%ProgramFiles%\IDT\WDM\sttray.exe
[HKLM\Software\Microsoft\Windows\CurrentVersion\Run]
SysTrayApp                      = "%ProgramFiles%\IDT\WDM\sttray.exe"
[RegisterDlls]
STacAPI.dll
[HKLM\Software\IDT\State\Shared]
ShowEventDialog                 = dword: 1
HPSupport                       = dword: 0x01
SpkSupport                      = dword: 0x01
[HKLM\Software\IDT\State\UI]
MultiStream                     = dword: 0
[HKLM\Software\IDT\Config\Shared]
Config_Oem                      = dword: 2
PollingPeriod                   = dword: 200
RecordPriority                  = dword: 1
[HKLM\Software\IDT\Config\STacsv]
HwSpkCfg                        = dword: 1
MultiStream                     = dword: 0
MicRetasking                    = dword: 0
MuteGPIOIndicator 		= dword: 0x00000100
[HKLM\Software\IDT\Config\SysTray]
ControlPanel                    = "IDTSG.cpl"
HideTrayIcon                    = dword: 0
PopUpType=dword:1
Automatic                       = dword: 0
[HKLM\SOFTWARE\IDT\Config\UI]
Config_Tab=dword:0x0000001e
Config_Lang=dword:0x00000000
Config_Oem=dword:0x00000002
Config_Adv=dword:0x00000001
Config_Portmap=dword:0x0000000c
Config_Pwr=dword:0x00000004
Config_Digital=dword:0x00000001
Config_Rates=dword:0x0000000e
Config_Spk=dword:0x00000010
Config_Credits=dword:0x00000000
Config_SpkFlags=dword:0x0000007f
Config_Dolby=dword:0x00000000
Config_Update=dword:0x00000001
Config_MicLevN=dword:0x2
MicBoost[0]=dword:0xA
MicBoost[1]=dword:0x14
InstallPath 		= "%ProgramFiles%\IDT\"
[HKLM\SOFTWARE\IDT\Config\EventExpressions]
Version=dword:1
[HKLM\Software\IDT\Config\EventExpressions\StreamRenderStart3]
010="MSenabled=GetGlobalRegDword("MultiStream",0)"
020="SetDeviceType(10,2)"
030="MuteRear=MSEnabled==0&&GetPresence(10)"
040="MutePin(13,MuteRear)"
[HKLM\Software\IDT\Config\EventExpressions\StreamRenderStop3]
010="SetDeviceTypeSlaved(10,2)"
020="MuteRear=GetPresence(10)"
030="MutePin(13,MuteRear)"
[HKLM\Software\IDT\Config\EventExpressions\JackPresenceA]
010="MSenabled=GetGlobalRegDword("MultiStream",0)"
020="MuteRear=(GetPresence(10)&&(JackSequence(10)==15))||((MSEnabled==0)&&(JackSequence(10)==0)&&GetPresence(10))"
030="MutePin(13,MuteRear)"
[HKLM\Software\IDT\Config\EventExpressions\ServiceStartup]
010="SetDeviceTypeSlaved(10,2)&&SetVerified(10,1)"
020="MSenabled=GetGlobalRegDword("MultiStream",0)"
030="MuteRear=(GetPresence(10)&&(JackSequence(10)==15))||((MSEnabled==0)&&(JackSequence(10)==0)&&GetPresence(10))"
040="MutePin(13,MuteRear)"
[HKR]
CodecName = "92HD71B8x"
[HKR\Settings]
InitVerbs                            = hex:0A,78,17,00
TraceFlags                           = dword: 0x89B3
EnablePcBeepAtCd                     = hex: 1
AllowHpOnNonSupportingPin            = hex: 0
CPL_SaveExtraPower                   = hex: 0
CPL_MaySwitchExtAmpPowerState        = hex: 1
CPL_SecondsAfter                     = dword: 10
EnablePcBeepAtCd 			= hex: 1
PmEnabledWidget				= hex: 0A,0B,0C,0D,0E,0F
ShareSystemMicJackAsLine = hex: 0
AfgPowerStatePolicy = hex: 2
CPL_ControlAfgPowerState = hex: 0x1
KeepAnalogLoopbackAlwaysOn = hex: 0
DelayInMsAfterPortDisabling = dword: 0x40
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt=dword:0x0221101F
[HKR\Settings\Pin\0B]
CfgDflt=dword:0x02A11023
[HKR\Settings\Pin\0C]
CfgDflt=dword:0x02A1102E
[HKR\Settings\Pin\0D]
CfgDflt=dword:0x92171010
[HKR\Settings\Pin\0E]
CfgDflt=dword:0x40F003F0
[HKR\Settings\Pin\0F]
CfgDflt=dword:0x0221101F
[HKR\Settings\Pin\14]
CfgDflt=dword:0x400003F0
[HKR\Settings\Pin\18]
CfgDflt=dword:0x80a11020
[HKR\Settings\Pin\19]
CfgDflt=dword:0x50A110F0
[HKR\Settings\Pin\1E]
CfgDflt = dword: 0x400003F0
[HKR\Settings\Pin\1F]
CfgDflt = dword: 0x400000F0
[HKR\Settings\Pin\20]
CfgDflt = dword: 0x400000F0
[HKR\Settings\Pin\27]
CfgDflt = dword: 0x9030002A
[HKR\Settings\GPIO]
00 = hex: 0xc2
[HKR\Settings\Connselector]
[HKR\Settings\filter\rear]
Associations=hex:1,2
DigitalInputMonitor=hex:1
DIMGainOffsetdB=hex:0
DIMAttenOffsetdB=hex:0
DigitalStereoMix=hex:1
DSMGainOffsetdB=hex:0
DSMAttenOffsetdB=hex:0
EnableInputMonitor                   = hex: 0
KeepAdcAlwaysOn                      = hex: 0
DIMDSMMixScalingDivisor               = dword: 1
DIMDSMMixScalingMultiplier            = dword: 1
RecMonitorMute                       = hex: 1
RecordingMux                         = dword: 1
MasterVolumeFixedLevel               = dword: 0
FixedLevelOnLineOut                  = hex: 0
EnableVolumeKnob                     = hex: 0
DisableSpdifControl                 	= hex: 0
SpdifOutCtrl	         	    	= hex: 1
DisableMicBoost                      = hex: 0
Mic3Boost                             = hex: 0
Mic2Boost                             = hex: 0
MicBoost                             = hex: 0
EnableSetFormatSupport               = hex: 1
EnableHwSpeakerConfigurationSupport  = hex: 0
EnabledPcmRenderBitsAndRates         = dword: 0x1F0FFF
EnabledPcmCaptureBitsAndRates        = dword: 0x1F0FFF
UserEnabledDacBitsAndRates           = dword: 0x1F0FFF
EnabledNonPcmBitsAndRates            = dword: 0x20040
ZeroPcmBitsAndRates                  = dword: 0x20040
DisableNonPcmPin                     = hex: 0
Mixer = hex: 0x17
DisableCDInFromRender = hex: 1
DisableCDInFromCapture = hex: 1
PCBeepMute				= hex: 0
PCBeepVolume				= dword: 0xfffb0265
DigitalRecordingLevel = hex: 1
DisableMicInFromRender = hex: 0x01
DisableMic1InFromRender = hex: 0x01
DisableMic2InFromRender = hex: 0x01
DisableMic3InFromRender = hex: 0x01
[HKR\Settings\filter\rear\plugins]
RegVersion                              = dword: 1
[HKR\Settings\filter\rear\plugins\Render]
[HKR\Settings\filter\Rear\plugins\render\EQ]
Load=dword:1
IdEffect=dword:1
IdEffectType=dword:1
Order=dword:400
[HKR\Settings\filter\rear\TopoNames]
MicIn                     = "{A218C4A7-BDF8-4e59-9BEE-994835B7F393}"
Mic2In                    = "{EAE80DBE-CDC7-4d22-9E58-2DE19CD68407}"
Mic3In                    = "{0AA49151-C622-4209-BC30-E81D62D23F13}"
[HKR\Settings\filter\Rear\MaxLvlLimiters]
MicBoostLevel                		= dword: 0x000a0000
[HKLM\Software\IDT\Config\UI\Layout\Panel[0]]
Location="Front"
Size="1x3"
[HKLM\Software\IDT\Config\UI\Layout\Panel[1]]
Location="Rear"
Size="1x2"
[HKLM\Software\IDT\Config\UI\Layout\Schema[0]]
Desc=""
[HKLM\Software\IDT\Config\UI\Layout\Schema[0]\Jack[0]]
Panel=dword:0x0
Row=dword:0x0
Col=dword:0x0
Port=dword:0xA
Color="black"
Dev[0]="HP"
[HKLM\Software\IDT\Config\UI\Layout\Schema[0]\Jack[1]]
Panel=dword:0x0
Row=dword:0x0
Col=dword:0x1
Port=dword:0xB
Color="black"
Dev[0]="Mic"
[HKLM\Software\IDT\Config\UI\Layout\Schema[0]\Jack[2]]
Panel=dword:0x0
Row=dword:0x0
Col=dword:0x2
Port=dword:0xD
Color="black"
Dev[1]="Speaker_Front"
[HKLM\Software\IDT\Config\UI\Layout\Schema[0]\Jack[3]]
Panel=dword:0x1
Row=dword:0x0
Col=dword:0x0
Port=dword:0xF
Color="black"
Dev[0]="HP"
[HKLM\Software\IDT\Config\UI\Layout\Schema[0]\Jack[4]]
Panel=dword:0x1
Row=dword:0x0
Col=dword:0x1
Port=dword:0xC
Color="Black"
Dev[0]="mic"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.60