M-3.INI Driver File Contents (IDT_Audio_w7.zip)

[Models]
Default=this
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\IDT=yes
HKLM\Software\IDT\GlobalState=yes
[APPS]
[CopyFiles.32]
stlang.dll = 0x25
stacsv.exe = 0x25
idtcpl.cpl = 0x25
idtmini1.exe = 0x25
[CopyFiles.64]
stlang64.dll = 0x25
stacsv64.exe = 0x25
idtcpl64.cpl = 0x25
idt64mp1.exe = 0x25
[ReplaceDlls.32]
stapo.dll = 0x25
stcplx.dll = 0x25
[ReplaceDlls.64]
stapo64.dll = 0x25
stcplx64.dll = 0x25
[StartServices.32]
STacSV -r
[StartServices.64]
STacSV64 -r
[StopServices.32]
STacSV -u
[StopServices.64]
STacSV64 -u
[HKLM\Software\Microsoft\Windows\CurrentVersion\Run.32]
SysTrayApp="%ProgramFiles%\IDT\WDM\sttray.exe"
[HKLM\Software\Microsoft\Windows\CurrentVersion\Run.64]
SysTrayApp="%ProgramFiles%\IDT\WDM\sttray64.exe"
[HKLM\SOFTWARE\IDT\State\Shared]
ShowEventDialog = dword: 1
[HKLM\Software\IDT\Config\STacsv]
VIM_Enabled	= dword: 0
[HKLM\Software\IDT\Config\SysTray]
HideTrayIcon    = dword: 0
PopUpType       = dword: 1
[HKLM\Software\IDT\Config\SysTray.32]
HideTrayIcon    = dword: 0
ControlPanel    = "idtcpl.cpl"
Automatic       = dword: 1
PopUpType       = dword: 1
PollingPeriod   = dword: 200
[HKLM\Software\IDT\Config\SysTray.64]
HideTrayIcon    = dword: 0
ControlPanel    = "IDTCPL64.cpl"
Automatic       = dword: 1
PopUpType       = dword: 1
PollingPeriod   = dword: 200
[StartConsoleApps.32]
IDTPIMA.exe -mode 0 -submode 2 -defaultCapture 0x0B
IDTPIMA.exe -mode 0 -submode 2 -defaultRender 0x0D
[StartConsoleApps.64]
IDTPMA64.exe -mode 0 -submode 2 -defaultCapture 0x0B
IDTPMA64.exe -mode 0 -submode 2 -defaultRender 0x0D
[HKR]
CodecName = "STAC9220"
[HKR\Settings]
TraceFlags                           = dword: 0x89B3
PmEnabledWidget                = hex: 02, 03, 04, 05, 06, 07, 08, 09, 0A, 0B, 0C, 0D, 0E, 0F
CPL_SaveExtraPower = hex: 0
CPL_MaySwitchExtAmpPowerState = hex: 1
CPL_SecondsAfter                    = dword: 10
CPL_UserControlsFixedDigitalOutRate  = hex: 0
PlaybackCaptureAssociations	= hex: 21
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x400000F0
[HKR\Settings\Pin\0B]
CfgDflt = dword: 0x90A70120
[HKR\Settings\Pin\0C]
CfgDflt = dword: 0x400000F0
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x90170110
InputOutput = hex: 1
[HKR\Settings\Pin\0E]
CfgDflt = dword: 0x400000F0
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x400000F0
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x400000F0
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x400000F0
[HKR\Settings\Pin\15]
CfgDflt = dword: 0x400000F0
[HKR\Settings\gpio]
[HKR\settings\filter\Speaker]
Associations                         = hex: 1,2
DigitalVolumeControl                 = hex: 0
EnableInputMonitor                   = hex: 0
EnableVendorPcBeep                   = hex: 0
PcBeepVolume                         = dword:0xfff937e4
PcBeepMute                           = hex: 0
Mixer = hex: 0x1C
[HKR\Settings\filter\MuxedIn1]
Associations                         = hex: 2
MicInRecVolume                       = dword: 0x000C38A6
Mixer                                = hex: D
StereoMixNID = hex: 0x1C
[HKR\Settings\filter\MuxedIn1\MaxLvlLimiters]
MicBoostLevel                        = dword: 0x00140000
[HKLM\SOFTWARE\IDT\Apo\LFX\MuxedIn1\Plugins\Noise_Reducer]
load = dword: 1
idEffect = dword: 31
order = dword: 500
[HKLM\SOFTWARE\IDT\Apo\LFX\MuxedIn1\Presets\_Initial\Noise_Reducer]
bypass = dword: 1
WetDryMixPercent = dword: 90
[HKLM\SOFTWARE\IDT\Apo\LFX\MuxedIn1\Presets\_Intmic\Noise_Reducer]
bypass = dword: 0
WetDryMixPercent = dword: 100
[HKLM\SOFTWARE\IDT\Apo\LFX\MuxedIn1\Presets\_Extmic\Noise_Reducer]
bypass = dword: 1
WetDryMixPercent = dword: 100
[HKLM\software\IDT\Apo\LFX\MuxedIn1\plugins\MonoMic]
idEffect = dword: 30
idEffectType = dword: 30
load = dword: 1
order = dword: 120
[HKLM\software\IDT\Apo\LFX\MuxedIn1\Presets\_Initial\MonoMic]
bypass = dword: 1
Patch0 = dword: 0
Patch1 = dword: 0
[HKLM\Software\IDT\APO\UI\Speaker]
Config_ExTab = dword: 0x40
[HKLM\software\IDT\Apo\GFX\Speaker\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}"
[HKLM\software\IDT\Apo\LFX\Speaker\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{62dc1a93-ae24-464c-a43e-452f824c4250}"
[HKLM\SOFTWARE\IDT\APO\GFX\Speaker\plugins\FFT]
idEffect = dword: 43
idEffectType = dword: 43
load = dword: 1
order = dword: 1115
[HKLM\Software\IDT\APO\GFX\Speaker\Presets\_Initial\FFT]
bypass = dword: 0
[HKLM\Software\IDT\APO\GFX\Speaker\Plugins\EQ]
Load = dword: 1
IdEffect = dword: 1
IdEffectType = dword: 1
Order = dword: 1500
[HKLM\Software\IDT\APO\GFX\Speaker\Plugins\SpeakerMgr]
Load = dword: 1
IdEffect = dword: 32
IdEffectType = dword: 32
Order = dword: 2000
[HKLM\Software\IDT\APO\GFX\Speaker\Presets\_Initial\SpeakerMgr]
bypass                          = dword: 0x0
[HKLM\Software\IDT\Config\UI]
Config_Adv                           = dword: 0x101
Config_SpkFlags				 = dword: 0x02
Config_Pwr					 = dword: 0x03
Config_Voice				 =dword:  0x1
[HKLM\Software\IDT\Config\UI\Speaker]
Config_ExTab = dword: 0x40
[HKLM\Software\IDT\Config\UI\MuxedIn1]
Config_ExTab = dword: 0x11
[HKLM\Software\IDT\Config\Shared]
Config_Oem                           = dword: 0x2
[HKLM\Software\IDT\APO\Knowles]
DisBetMic=dword:0x064
KAParamL=hex:81,31,12,32,8C,4B,FF,E5,7F,EA,34,F5,99,EC,9A,56,D7,D6,AB,0D,2F,A9,DD,6D,AC,EE,BA,68,D0,EB,EB,B9,00,29,61,C9,4F,09,77,1A,AC,1F,E5,F2,7A,F8,01,60
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.15