1. scad203.zip Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (scad203.zip)

Table of Contents 

1) CONTENTS 
2) SYSTEM REQUIREMENTS
3) INSTALLATION
4) NOTICE


================================================================
1) CONTENTS
================================================================

* EIZO Screen Administrator Console Version 2.0.3
* EIZO Screen Administrator Service Version 2.0.3
* Client for EIZO Screen Administrator Version 2.0.3
* Readme file


================================================================
2) SYSTEM REQUIREMENTS
================================================================

2-1) Screen Administrator Service (Service Software)

* CPU:          Intel Pentium compatible 300 MHz or faster
* Memory:       128 MB or greater (10MB or greater RAM is required
                 for Console software operation)
* HDD Capacity: 10 MB or larger of additional hard disk space
* OS:           Microsoft Windows 2000 Professional
                Microsoft Windows 2000 Server
                Microsoft Windows XP Server
                Microsoft Windows Server 2003
* Network:      TCP/IP protocol (TCP,UDP,ICMP)
                  - Protocol and port number for receiving the data
                   TCP port 135 (WMI)
                   UDP port 31218
                   ICMP

2-2) Screen Administrator Console (Console Software)

* CPU:          Intel Pentium compatible 300 MHz or faster
* Memory:       128 MB or greater (40MB or greater RAM is required
                 for Console software operation)
* HDD Capacity: 10 MB or larger of additional hard disk space
* OS:           Microsoft Windows 2000 Professional
                Microsoft Windows 2000 Server
                Microsoft Windows XP Server
                Microsoft Windows Server 2003
* Resolutions:  1024 dots x 768 lines or higher
* Network:      TCP/IP protocol (TCP,UDP,ICMP)
                  - Protocol and port number for receiving the data
                   UDP port 31027

2-3) Client for Screen Administrator (Client Software)

* CPU:          Intel Pentium Compatible 300 MHz or faster
* Memory:       128 MB or greater (20MB or greater RAM is required
                 for Console software operation)
* HDD Capacity: 10 MB or larger of additional hard disk space
* OS:           Microsoft Windows 2000 Professional
                Microsoft Windows XP Professional
* Network:      TCP/IP protocol (TCP,UDP,ICMP)
                  - Protocol and port number for receiving the data
                   TCP port 135 (WMI)
                   TCP port 139/ TCP port 445/ TCP port 137/ TCP port 138
                     (File and printer sharing)
                   UDP port 31106
                   ICMP


[NOTE]
* The CPU and memory capacity should satisfy the OS requirements.
* When the used memory is more than the amount of installed memory, 
  additional memory is required.

================================================================
3) INSTALLATION the Screen Administrator
================================================================

3-1) Install Screen Administrator Service
(1) Click 'Setup.exe'.
(2) Setup program will be started. 
    Choose 'Install Screen Administrator Service' from the menu.
(3) Follow the instructions and install the Screen Administrator
    Service.

3-2) Install Screen Administrator Console
(1) Click 'Setup.exe'.
(2) Setup program will be started. 
    Choose 'Install Screen Administrator Console' from the menu.
(3) Follow the instructions and install the Screen Administrator
    Console.

3-3) Install Client for Screen Administrator
(1) Click 'Setup.exe'.
(2) Setup program will be started.
    Choose 'Install Client for Screen Administrator' from the
    menu.
(3) Follow the instructions and install the Client for Screen
    Administrator.

[NOTE]
* UNINSTALL of the Screen Administrator Service.
(1) Exit Screen Administrator Service
(2) Open [Start]-[Settings]-[Control Panel] menu.
(3) Select [Add/Remove Programs].
(4) Select the Screen Administrator Service from the list and
    click [Remove].
(5) Follow the instructions of uninstaller.

* UNINSTALL of the Screen Administrator Console.
(1) Exit Screen Administrator Console
(2) Open [Start]-[Settings]-[Control Panel] menu.
(3) Select [Add/Remove Programs].
(4) Select the Screen Administrator Console from the list and
    click [Remove].
(5) Follow the instructions of uninstaller.

* UNINSTALL of the Client for Screen Administrator
(1) Open [Start]-[Settings]-[Control Panel] menu.
(2) Select [Add/Remove Programs].
(3) Select the Client for Screen Administrator from the list
    and click [Remove].
(4) Follow the instructions of uninstaller.


================================================================
4) NOTICE
================================================================

* Only one server software can work on one network system.
  Existence of two or more servers on the network may causes
  unanticipated problems.
* If you already have installed the software, remove it before
  reinstalling.
* Monitor auto-adjustment function cannot be executed, when
  - Windows is under power saving mode.
  - Running screen saver and password protection is enabled.
  - Monitor power is off.
* If a previous version of Screen Administrator and Client for 
  Screen Administrator software has used in your network, update
  all Client for Screen Administrator software to the same 
  version of Screen Administrator that is installed to Server PC.

--------------------------------------
Microsoft, Windows and Windows NT are the registered trademarks 
of Microsoft Corporation.
ScreenAdministrator is a trademark of EIZO NANAO CORPORATION.
EIZO is a registered trademark of EIZO NANAO CORPORATION.

Copyright(c)2001-2005 EIZO NANAO CORPORATION.  All rights reserved.