Kpnmsg.INI Driver File Contents (FaxDriver_CDC1626_CDC1726_20100809.exe)

TITLE=Port Set Up Error Message
TITLE_NM=Port Set Up
WINSOCK_ERROR=Check whether TCP/IP is set correctly in network properties.
SOCKVER_ERROR=%s does not run correctly using this version of WinSock.
LPR_RETRY=An error occurred during communication. Check whether power to the printer is on and the printing system is online. Clicking the [Retry] Button will restart printing.
LPR_RETRY_TOP=An error occurred during communication. Clicking the [Retry] Button will restart the print job from the beginning.
JCP95_ERROR=Using the print server is not supported.
LPR_QUEUE_ERR=An error occurred during communication. Check whether the port name of the print server is correct. Clicking the [Retry] Button will restart the print job.
IPP_RETRY=An error occurred during printing. The printing system power is off or the printer is off-line. Continue to print?
IPP_SEND_ERR_CODE=An error occurred during communication. (ERROR CODE:%04X)\nPrinting will be canceled.
IPP_SEND_ERROR=An error occurred during communication.\nPrinting is canceled.
IPP_TIMEOUT=The print server does not respond. To continue, click the [Retry] Button.
IPP_NOT_AUTHORIZED=User authentication failed. Printing cannot start.
IPP_FORBIDDEN=The request was rejected. Printing is canceled.
ADD_PORT_LIMIT=Another Add Port wizard is displayed.
PORTALREADYEXISTS_S=The printer port %s already exists.
NULL_PORT_ERROR=Enter the destination port.
ADD_PORT_ERROR=Addition of a Port Set Up failed.
INVALIDSERVERNAME=IP address or a host name.
INVALIDQUEUENAME=Select the port name of the print server.
INVALIDPORTNAME_S=The IP address or host name is invalid.
INVALIDIPADDRESS=The IP address is invalid.
IPALREADYEXISTS=The IP address already exists.
ADD_BROADCASE_ERROR=IP address is invalid.
BROADCAST_ERROR=The maximum number of Broadcast IP address is 16.
INVALID_URI=Enter a printing system URL.
INVALID_PROXYNAME=Enter an address for the proxy server.
INVALID_PROXYNUMBER=Enter the port number of the proxy server.
INVALID_CONNECT=Connection to the specified print server failed.\nContinue to add a port?
INVALID_URL_S=The URL is invalid.
CONF_PORT_LIMIT=Another port configuration dialog is already open.
INVALID_TIMEOUT=The timeout value should be set within the range of 60 to 3600.
INVALID_CHUNKSIZE=The size of Max chunk should be set within the range of 1024 to 16384.
INVALID_NUMBER=Enter the port number.
PROXY_ENABLE=Are you using a proxy server to connect to the Internet?
PROXY_DISABLE=Print using the proxy server?\n\nIf a proxy server is used, ask your network administrator.
INVALID_USERNAME=The sender name is invalid.
INVALID_FROMADDR=The sender address is invalid.
INVALID_SERVNAME=The SMTP server name is invalid.
INVALIDSUBNETMASK=The subnet mask is invalid.
SEGALREADYEXISTS=The segment already exists..
PING_SUCCESS=Communication with server %s was successful.
PING_FAILED=Server %s does not exist on the network.
INVALIDTOADDR=The transmission destination address is invalid.
INVALIDDIVIDESIZE=Split size must be 16 to 99999.
ADD_PORT_FINISH=The port for %s successfully created.\n\nThis port may be selected for printer drivers using the Windows Add Printer wizard.
FAX_INVALID_DATA=Printing was attempted to a wrong port.
FAX_INVALID_DATA_2=Data was sent to a wrong port.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.80