Kpndlg.INI Driver File Contents (FAXDriver_DC2228_DC2328_20100901.exe)

[FONT]
DEFAULT=Arial,11,ANSI
ABOUT1=Arial,14,ANSI
ABOUT2=Arial,10,ANSI

[TITLE]
ADDPORT=Add Port wizard
CONFIG=Port configuration
ADVANCED=Advanced Setup
SEARCH=Printing System Search
SEARCH_FAX=Device Search
BROADCAST=Search Configuration
ABOUT=About
ERROR=Port Set Up Error Message
PASSWORD=Password
SEGMENT=IP Network Discovery Segment List
COVERPAGE=Cover Page

[LABEL]
STC_PT_INFO=Select the port.\n\nSelect the port depending on the mode of sending data.
STC_PN_INFO=Enter the desired port name. This name will be displayed in the Windows list of printer ports. Existing port names, such as LPT1, may not be used.
STC_LA_INFO=Enter the IP address or host name of the print server.
STC_LA_INFO_FAX=Enter the IP address or host name of the device.
STC_LA_IP=&IP address or Host name:
STC_LQ_INFO=Enter the port name of the print server.
STC_RA_PORT=&Port Number:
IDC_IS_INFO=Select the method used by your PC to connect to the Internet.
STC_IU_INFO=Enter the URL of the IPP printer.
STC_IU_INFO2=Example:ipp://(IP address)/ipp
STC_IU_IPP1=Example for %s:\nipp://(IP address)/printers/lp1
STC_IU_URL2=Use the actual printing system IP address for (IP address) as in the examples above.
STC_MW_INFO1=E-mail Printing Configuration
STC_MW_INFO2=Port Set Up creates an e-mail port within Windows which directs print jobs to a remote printer's e-mail address. The Port Set Up e-mail port may be selected for existing or new printer drivers using the same procedure as any other printer port, such as LPT1.
STC_MW_INFO3=For e-mail printing to be successful, the printing system must be configured to retrieve the e-mailed print jobs from a POP3 mail server. POP3 configuration is done with AdminManager or with a browser.
STC_MW_INFO4=Port Set Up e-mail printing is only available for printing systems.
STC_FN_INFO=After clicking the [Finish] button, the port will be registered as below.
STC_FN_IP=IP address or host name:
STC_FN_QUE=Port name of the Print Server:
STC_FN_NAME=Destination printer port name:
STC_FN_NAME_FAX=Port name:
STC_FN_PORT=Port number:
STC_FN_URL=Printing system URL:
STC_FN_PRINTER=Destination printing system:
STC_NAME=Destination &printer port name:
STC_QUE=&Port name of the Print Server:
STC_PROXY=A&ddress:
STC_PORT=&Port number:
STC_URL=Printing system &URL:
STC_STATE=Communicating with the print server...
STC_SC_INFO=Select the printing system from the list below and click [OK]. The printing system will be discovered only if it is on the local network segment. To discover an printing system on a remote network segment, click [Configure] and enter an IP network broadcast address and click [Search].
STC_SC_INFO_FAX=Select the device to send data and click [OK]. The device will be discovered only if it is on the local network segment. To discover a device on a remote network segment, click [Configure] and enter an IP network broadcast address and click [Search].
STC_MB_INFO=Select the destination address from the following list.
STC_BC_INFO=Enter a broadcast address for the network to be searched, e.g., 171.62.186.255.
STC_BASED=Port name based on:
STC_ACCOUNT=Sender na&me:
STC_FROMADR=S&ender address:
STC_SMTP=SMTP ser&ver:
STC_TOADR=Prin&ting system E-mail address:
STC_EMAIL=&Port name:
STC_USER=&User name:
STC_USERID=&User ID:
STC_PASSWORD=&Password:
STC_TIME=Communication &timeout [60 to 3600 seconds]:
STC_PW_INFO=To print, enter a user name and a password.
STC_TIMEOUT=&Timeout value:
STC_SEC=Sec.
STC_CHUNK=&Max Chunk Size:
STC_BYTE=Byte
STC_LANG=&Language:
STC_SG_INFO=Add the IP address of a remote network segment to the address list. All networks on the IP Network Discovery List will be searched in addition to the local network segment.
STC_IP=&IP Network Address
STC_SUBNET=&Subnet Mask
STC_SEGMENT=IP Network Discovery &List
STC_CODE=C&haracter Code:
STC_NOTE=Note: Address must be for an e-mail printing system, not a normal recipient.
STC_SUBJECT=S&ubject:
STC_BODY=&Text:
STC_BIDI=Bi-directional communication is enabled in the configuration of the printer driver being used. Select [Disable bi-directional support for this Printing system] in Spool Settings of the properties of the printing system. Printing might fail when Port Set Up is used.\nContinue to print?

[TAB]
IPP1=Transport
IPP2=Authentication
SMTP1=General
SMTP2=Advanced

[LIST]
ITEM0=IP address
ITEM1=Host name
ITEM2=MAC address
ITEM3=Model name
ITEM4=Printing System e-mail address
ITEM5=IP network address
ITEM6=Subnet mask
ITEM_DEVICE=Device

[COMBO]
LANG0=English (U.K.)
LANG1=English (U.S.)
LANG2=French
LANG3=German
LANG4=Japanese

[BUTTON]
OK=OK
CANCEL=Cancel
YES=&Yes
NO=&No
BTN_APPLY=&Apply
BTN_NEXT=&Next >
BTN_BACK=< &Back
BTN_FINISH=Finish
BTN_RETRY=&Retry
BTN_SEARCH=&Search...
BTN_CNF=&Configure...
BTN_AGAIN=&Search
BTN_ADD=&Add
BTN_DEL=&Delete
BTN_TEST=&Test
BTN_HELP=&Help
BTN_ABOUT=A&bout
BTN_HIGH=Ad&vanced...
RAD_LPR=Print using &LPR
RAD_IPP=Print using &IPP
RAD_RAW=Print using &Raw mode.
RAD_SMTP=Print using &E-mail.
RAD_FAX=Network &FAX.
RAD_MODEM=Connects using a &modem and telephone line.
RAD_LAN=Connects using a &local area network.
RAD_OFF=N&o, a proxy server is not used.
RAD_ON=&Yes, a proxy server is used.
CHK_BIDI=Do not display the message from next t&ime.
CHK_POPUP=Display the print job &cover page dialog.
CHK_CHECK=Generate &return receipts.
CHK_AUTH=Use SMTP aut&hentication.
CHK_DIVIDE=&Split into multiple e-mails when larger than this size.
CHK_PROXY=Connect via p&roxy server.
CHK_CHUNK=Use &chunked encoding.
CHK_BASIC=U&ser authentication
CHK_SAVE=&Set as the default configuration.

[HELP]
HELP0=For the sender name and sender address, enter the name and e-mail address of the person who will be sending print jobs. E-mail servers often reject e-mail that does not include a sender e-mail address. These are also used for return receipts and cover pages.\n\nTo send e-mail print jobs, the e-mail port must be able to establish a connection with an SMTP mail server. Enter the SMTP server name or IP address. Click the [Test] button if you want to verify connection to the SMTP server.
HELP1=Enter the e-mail address of the printing system that will receive the print jobs. Click the [Search] button to search the network for printing systems with the e-mail printing capability enabled.\n\nThe port name is displayed in the Windows port list.\n\nWhen [Display the print job cover page dialog] is enabled, the cover page configuration dialog is displayed for each print job. Selecting [Generate return receipts] will cause the printing system to send e-mail confirmation for every print job.
HELP2=If the mail server requires SMTP authentication, check [Use SMTP Authentication] and enter an authorized user name and password.\n\nSplitting into multiple e-mails may be necessary on some systems which limit the size of individual e-mails.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.28