COPYRIGHT (C) SALT INTERNATIONAL CORP. PenMount Touch Screen Kits is a turn-key solution to upgrade your product to have touching function. PenMount product supports DOS, Windows 3.1, Windows 95, Windows 98,Windows Me,Windows NT,WIndows 2000,Windows XP,Windows CE and Linux *HOW TO INSTALL PENMOUNT DOS DRIVERS TO YOUR COMPUTER* 1. INSTALL PENMOUNT DOS DRIVER -- BEFORE INSTALLATION Please select on COM port (com1, com2, com3 or com4) to connect PenMount Touch Screen product to your computer by RS-232 cable. The PenMount touch screen RS-232 connector is 9-pin D-sub connector. The PenMount DOS driver diskette contains the following files: INSTALL.EXE -- General purpose installation utility README.TXT -- The file for installing the drivers _INST.EXE ICECREAM.EXE-- The demonstration program, icecream order ICECREAM.KEY PMDETECT.EXE-- to identify the communication port and IRQ number for PenMount Touch Screen. The detecting data will be written to PMOUSE.CFG file PMOUSE.CFG PMOUSE.EXE PMSET.EXE SWITCH.COM PM.BAT -- to check, change or test the PenMount Touch Screen PMINIT.BAT -- to start up PenMount driver in system CALIBRAT.BAT-- for calibration SVGA256.BGI SVGA16.BGI EGAVGA.BGI PMGET.EXE -- getting touch's data Step 1 Using 'INSTALL.EXE' utility to install PenMount software driver To install PenMount software under DOS mode. Insert the driver diskette to floppy disc driver and type 'INSTALL' . e.g. A:\INSTALL You will see the screen show "Salt International Corp. PenMount Install Utilities, To install the PenMount Package into your hard disk". Press 'ENTER' key to allow PenMount install the drivers to drive C or use keyboard to key-in the hard disc drive which you plan to install the drivers. After installing the PenMount drivers to system, the driver will ask "Do you want to modify your Autoexec.bat to initialize PenMount? (Y/N) Suggest you choose 'YES' for generating the initialization instruction in AUTOEXEC.BAT file. Follow the message to complete the installation. Step 2 Identify the communication port and IRQ number If you are the first time to install the driver, or change PenMount Touch Screen's com port, please use PMDETECT to check the com port no and IRQ number. PMDETECT will save the correct data to PMOUSE.CFG file for further use. e.g. C:\PENMOUNT\PMDETECT You will see the driver is detecting your communication port and IRQ number from COM1 IRQ4, COM2 IRQ3, COM3 IRQ4, ...... COM4 IRQ15. until PenMount find the com port and IRQ number automatically. The screen will show : PenMount is initialized successfully!!! Create file 'pmouse.cfg'. Success. PenMount internal settings: Comm. Port: COM<n> IRQ<n> ......... ......... ........ The data will be saved until you change the communication port or IRQ number. If you do not like this "PMDETECT" to detect any IRQ number, the commands is also to instruct, for example, if you do not need to detect IRQ5 of the system, the command is instructed as below: e.g. C:\PENMOUNT\PMDETECT -N5 For example, if you do not need to detect IRQ5 and IRQ9 of the system, the command is instructed as C:\PENMOUNT\PMDETECT -N5 -N9 Step 3 Do Calibration To adjust the touch screen mapping properly to display screen. Type Calibrate under Utility directory e.g. C:\PENMOUNT\PM choose '1' DO CALIBRATION (adjust screen mapping) The display will ask you to select video mode number, select by keyboard your display mode to start the calibration. Touch the upper-center point, then touch the right-center point, bottom-center point and left-center point. After doing calibration, the data got will be showed in the screen, press any key to continue the progress. After doing the calibration, suggest you test the touch screen and display mapped results by choose '4' DRAWING TEST under PM.BAT Step 4 Initializing the PenMount driver If you do not put the initialization command in AUTOEXEC.BAT, do the initializing of PenMount driver before you use the PenMount Touch Screen. e.g. C:\PENMOUNT\PMINIT The display will show the message twice, the initialization message is showed as below: PMSET V1.00 Copyright (c) SALT International Corp. Test: COM<n> IRQ<n> ..... (<n> is the number after PMDETECT done) Open configuration file 'C:\PENMOUNT\PMOUSE.CFG' . Success. Initialize PenMount Device Data ................ OK! PenMount communication settings: COM<N> IRQ<n> Baud Rate: <xxxx> SALT INTERNATIONAL CORP. 2001Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.