Instructions to Update 5KLE Printer Firmware using the Parallel Port Bryce Part Number 90-30022-001 Revision A ====================================================== The update consists of two operations. The first operation prepares the 5KLE printer to receive the firmware update. The second operation downloads the firmware update the printer. Prepare 5KLE to Receive Firmware Update -------------------------------------- 1. Make sure the 5KLE is connected to the PC computer's parallel port. If a switch box is being used (not recommended) make sure the 5KLE printer is selected. 2. Make sure the printer is off. 3. Press and hold the ON-LINE key. While holding the ON-LINE key turn on the printer. 4. When the message 'SYSTEM BOOTLOADER' appears on the top line of the LCD display release the EJECT ENV. key. 5. The next message seen is "PC Card not Found, PARALLEL (+=Y, -=N)" 6. Press the + key. See the message 'waiting for loader' Download Firmware to the 5KLE Printer using DOS or Windows 3.1 ----------------------------------------------------------- 1. Insert update floppy into floppy drive. 2. Make the current directory the floppy drive. If the name of the floppy is A, enter A: followed by the Enter key. If the name of the floppy is B, enter B: followed by the Enter key. Type UPDATE followed by the Enter key. 3. After pressing Enter look at the printer LCD. The LCD display should change to 'Reading COMP loader'. The next message should read 'Reading Component'. The next message should read 'Loading Printer Prog'. The next message should read 'Ready for Component'. The last message should read '1 Components Loaded'. The total time for the update should be a minute or two. Download Firmware to the 5KLE Printer using Windows 95 ------------------------------------------------------------- 1. Insert update floppy into floppy drive. 2. Click on 'START' button found at the bottom of the screen. Click on Run. Enter A:\UPDATE is the floppy drive is A or B:\UPDATE if the floppy drive is B. Click to OK button. 3. After clicking OK look at the printer LCD. The LCD display should change to 'Reading COMP loader'. The next message should read 'Reading Component'. The next message should read 'Loading Printer Prog'. The next message should read 'Ready for Component'. The last message should read '1 Components Loaded'. The total time for the update should be a minute or two.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.