1. SMX150_CD_20041020.zip Driver
2. readme.txt File Contents

readme.txt Driver File Contents (SMX150_CD_20041020.zip)

[English]
README.TXT                       SUMIX Corp.                     09/30/2004

                  Sumix SMX-150 Series USB2.0 Camera Driver
                            for Windows 2000/XP
                               Revision 1.5



Contents
========

- Description
- Installation
- Notes
- Contact Information



Description
===========

This software package contains a Windows 2000/XP driver for 
Sumix SMX-150 Series USB2.0 Camera.



Installation
============
If you have SMX-150 Series Camera CD insert it into your CD-ROM
drive and press the Install Driver button in the Autorun program.
This will install the camera driver automatically.

Below are listed instructions for manual SMX-150 Series Camera 
installation.

In this example, driver files are placed to 'C:\Tmp' directory. 
Attach Camera to USB2.0 connector.

A. Update Sumix SMX-150 Series USB2.0 Camera Driver.
    
    Under Windows 2000:
    
    1. Select 'Start'->'Settings'->'Control Panel'
    2. Double click on 'System'
    3. Select 'Hardware' tab
    4. Press 'Device Manager' button
    5. Expand 'Imaging devices'
    6. Double click on 'SMX-150 Series USB2.0 Camera'
    7. Select 'Driver' tab
    8. Press 'Update Driver...' button
    9. Press 'Next' button
    10. Select 'Display a list of the known drivers for this device so that
        I can choose a specific driver' and press 'Next' button
    11. Press 'Have Disk...' button
    12. Browse to 'C:\Tmp' directory
    13. Press 'OK' button
    14. Press 'Next' button
    15. After warning about 'not digitally-signed by Microsoft' 
        press 'Continue Anyway' button
    16. And press 'Finish' button to close the Hardware Update Wizard.

    Under Windows XP:
    
    1. Select 'Start'->'Settings'->'Control Panel'
    2. Double click on 'System'
    3. Select 'Hardware' tab
    4. Press 'Device Manager' button
    5. Expand 'Imaging devices'
    6. Double click on 'SMX-150 Series USB2.0 Camera'
    7. Select 'Driver' tab
    8. Press 'Update Driver...' button
    9. Select 'Install from a list or specific location (Advanced)' 
        and press 'Next' button
    10. Select 'Don't search. I will choose the driver to install' 
        and press 'Next' button
    11. Press 'Have Disk...' button
    12. Browse to 'C:\Tmp' directory
    13. Press 'OK' button
    14. Press 'Next' button
    15. After warning about 'has not passed Windows Logo testing ...' 
        press 'Continue Anyway' button
    16. And press 'Finish' button to close the Hardware Update Wizard.



Notes
=====

1. To be sure you are always using updated driver repeat the above sequence
for EVERY USB connector where your camera is used. Windows remembers and 
loads different versions of driver on different UBS connectors for the same 
device (camera, for example).

2. To prevent white "flies" and shifted rows appearence on the camera picture
validate that each IDE device uses DMA/UltraDMA transfer mode on your PC.
In PIO (Programmed Input Out) Mode, the CPU gets involved in transferring 
the data from or to the storage device to or from system memory through 
the input or output ports. In DMA Mode, the job of transferring the data 
is handed over to a bus-mastering system controller called the DMA controller.
The DMA controller is set up or programmed to handle the DMA transfer.
This relieves the processor from the duty of preforming the data transfer
so it can do other tasks.



Contact Information
===================

Sumix Corporation 
3403 Southwood Dr.
Oceanside, CA 92054
Tel.: (760)458 5321
Fax: (508)300 5526
E-mail: info@sumix.com
WWW: http://www.sumix.com/optic/index.html