[English]
README.TXT SUMIX Corp. 03/16/2004
Sumix SMX-150 Series USB2.0 Camera Driver
for Windows 2000/XP
Revision 1.36
Contents
========
- Description
- Installation
- Notes
- Contact Information
Description
===========
This software package contains a Windows 2000/XP driver for
Sumix SMX-150 Series USB2.0 Camera.
Installation
============
If you are installing DirectShow driver for the first time simply run the
SMX15WDM.EXE aplication. It will install the SMX-150 Series Camera
DirectShow driver automatically. After warning about 'not digitally-signed
by Microsoft' press 'Continue Anyway' button.
Notes
=====
1. To be sure you are always using updated driver repeat the above sequence
for EVERY USB connector where your camera is used. Windows remembers and
loads different versions of driver on different UBS connectors for the same
device (camera, for example).
2. To prevent white "flies" and shifted rows appearence on the camera picture
validate that each IDE device uses DMA/UltraDMA transfer mode on your PC.
In PIO (Programmed Input Out) Mode, the CPU gets involved in transferring
the data from or to the storage device to or from system memory through
the input or output ports. In DMA Mode, the job of transferring the data
is handed over to a bus-mastering system controller called the DMA controller.
The DMA controller is set up or programmed to handle the DMA transfer.
This relieves the processor from the duty of preforming the data transfer
so it can do other tasks.
Contact Information
===================
Sumix Corporation
3403 Southwood Dr.
Oceanside, CA 92054
Tel.: (760)458 5321
Fax: (508)300 5526
E-mail: info@sumix.com
WWW: http://www.sumix.com/optic/index.html
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.