------------------------------------------------------
Instructions for installing for the USB Storage System
------------------------------------------------------
Your USB Storage System has been designed to be easy to use and install. This
guide has been provided to help you correctly install the necessary drivers.
***************************************************************************
* 1. Make sure that the IDE/ATAPI device is setting in the Master mode. *
* 2. External power supply is required if bus power is not enough to support the device. *
* 3. **Note: If you use USB interface in the COMBO series ,the External power is needed.** *
***************************************************************************
1. For PC USERS
Your USB Storage System is compatible with any PC running Windows 98/98SE
/ME and Windows 2000 that has a USB port. It installs with the normal Plug
and Play process:
Windows ME and 2000
-------------------
Connect the USB cable to the computer USB port. Upon plugging the USB cable
to the computer, driver will enumerate and will give drive Icon automatically.
No other drivers are required.
Windows 98 and 98SE
-------------------
1) Place the CD into your CD-ROM drive.
2) Go to D:\drives\USB\WIN98\ run setup.exe to install driver.
(D:\ is the letter of your CD-ROM driver)
3) When installed completey,make sure that the USB Storage System is plugged into
a wall outlet and is powered up.
4) Plug the USB cable into the PC.
5) Windows will find the new hardware.
6) Windows will find and locate the drivers from the disk and assign the
next available letter to the device. The drivers are now loaded. If the
storage device in your USB Storage System is a hard disk, you must now
partition and format the drive. This is done through the use of the DOS
utility FDISK. See your Windows documentation if you are unfamiliar with
FDISK. Note that you must run FDISK before you try to format the drive
and that you must run FDISK in a DOS window while Windows is running.
2. ForMacintosh Users
Your USB Storage System is compatible with any Mac running at least Mac OS 9 &
above and having a USB port. Here is how you install the drivers:
**If your device is hard drive**
Apple OS 8.6~9.0
-----------------
1) Place the CD into your CD-ROM drive.
2) Go to D:\drives\USB\MAC\HDD\8.6-9\ run installer to install driver.
(D:\ is the letter of your CD-ROM driver)
3) The program will asked you to restart PC.
Apple OS 9.0.4 ~9.x
-----------------
1) Place the CD into your CD-ROM drive.
2) Go to D:\drives\USB\MAC\HDD\9.0.4 later\ run installer to install driver.
(D:\ is the letter of your CD-ROM driver)
3) The program will asked you to restart PC.
**If your device is ATAPI drive (CD-ROM/CD-R/RW,DVD...)**
NOTE: Don't install manufature driver if TOAST software are already installed.
Apple OS 8.6~9.0
-----------------
1) Place the CD into your CD-ROM drive.
2) Go to D:\drives\USB\MAC\ATAPI\8.6-9\ run installer to install driver.
(D:\ is the letter of your CD-ROM driver)
3) The program will asked you to restart PC.
Apple OS 9.0.4 ~9.x
-----------------
1) Place the CD into your CD-ROM drive.
2) Go to D:\drives\USB\MAC\ATAPI\9.0.4 later\ run installer to install driver.
(D:\ is the letter of your CD-ROM driver)
3) The program will asked you to restart PC.
Connect the USB cable to the computer USB port. Upon plugging the USB cable to
the computer, driver will enumerate and will give drive Icon automatically.
The drives for your USB Storage System are now installed. You now need to
initialize the media in the drive. To format your media:
1) Highlight the icon for the USB Storage System.
2) From the Finder menu located at the top of the screen, select Special, Erase
Disk. You can select either DOS or Macintosh formatting. If you intend to
use the device on both a PC and a Mac, select DOS formatting.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.