=============================================================================
Intel(R) Server Platform ME Firmware Release Notes
=============================================================================
INTEL Enterprise Platform & Services Marketing
Intel Corporation
2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA
=============================================================================
DATE: March 15, 2010
TO: Intel(R) Server Boards S5520HC, S5500HCV, S5520HCT and Intel(R) Workstation Board
S5520SC customers
SUBJECT: ME(R) firmware "SPS_01.01.02.007.0_Production" release notes
=============================================================================
LEGAL INFORMATION
=============================================================================
Information in this document is provided in connection with Intel products.
No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating
to fitness for a particular purpose, merchantability, or infringement of any
patent, copyright or other intellectual property right. Intel Corporation may
have patents or pending patent applications, trademarks, copyrights, or other
intellectual property rights that relate to the presented subject matter.
The furnishing of documents and other materials and information does not
provide any license, express or implied, by estoppel or otherwise, to any
such patents, trademarks, copyrights, or other intellectual property rights.
Intel products are not intended for use in medical, life saving, or life
sustaining applications. Intel may make changes to specifications and product
descriptions at any time, without notice.
Intel is a registered trademark of Intel Corporation.
*Other names and brands are the property of their respective owners.
Copyright (c) 2010 Intel Corporation.
A portion of this firmware may be open source code, which falls under the
GPL 2.0 license.
=============================================================================
ABOUT THIS RELEASE
=============================================================================
This document lists only the differences from the defaults as released by the
MPSD NM team. Please refer to applicable ReleaseNotes.pdf for details.
=============================================================================
Configuring and building the image
=============================================================================
The binary ME Region image (further referred to as ME image) is a single
binary file resulting of merge of three components:
1. SPSRecovery.bin
2. SPSOperational.bin
3. XML file that holds specific configurations for the resulting image.
In addition SDR records are built from the XML file for inclusion into
destination platform's SDR.
The ME image and SDR files are configured and built by ftool.exe utility.
Command-line invocation of this utility is automated with .bat scripts.
Editing for configuration:
To edit the XML file invoke "edit.bat". GUI mode of the ftool.exe utility
opens and allows editing the XML file holding the configuration parameters.
See sections below for information about required EPSD XML changes.
Building:
To build the image from the three components invoke "build.bat".
The NM binary image file is built and placed in "Build\image" directory.
The SDR files are built and placed in "Build\SDR" directory.
Note:
This ME FW Update package will only update the ME FW Operational code, it
will not update the ME FW Recovery code.
=============================================================================
INSTALLATION PROCEDURE
=============================================================================
1. Copy the entire contents of the SPS_01.01.02.007.0_Production_UPDATE.zip
archive file to the storage medium of your choice. This can be a hard disk,
floppy disk or USB flash drive.
All of the files in the zip archive must reside in the same directory.
2. Boot to EFI and then run the upd_ME_dib.nsh script file to update the
ME firmware.
Using fwpiaupd.efi with your own command line parameters is not supported
and doing so is at your own risk!
3. Power off the system and cycle AC power
=============================================================================
EPSD changes to the defaults
=============================================================================
Configuration of the image for EPSD platforms requires changes to defaults
included in the originally released MPSD package file(s).
List of XML changes:
- none for SPS_01.01.02.007.0_Production release .
List of SDR changes (need to be done by hand):
- none for SPS_01.01.02.007.0_Production release .
[END OF RELEASE NOTES]
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.