####################################################################
# Resource File Version 1.0 #
# TEXT LABEL NAMES #
####################################################################
MSG_PDMISSING_CONFIRM=Warning: This will mark the Physical Drive as Missing! Are you sure?
RAID_LEVEL_1_DISPLAY_STRING=RAID 1
MSG_MEMFREE_FAILED=Failed to free memory
PROPERTY_ISUARTPRESENT_TEXT=UART Present
MANUAL_MODE_ARRAY=Array Selection
AUTHENTICATE_DIALOG_TITLE=Enter User Name & Password
RECONWIZARD_TEXT=Reconstruction Wizard
IOPOLICY_CACHED=Cached IO
LEGEND_UNUSED_TEXT=Available
CONFIGWIZARD_TEXT=Configuration Wizard
PROPERTY_DEVID_TEXT=Device ID
PROPERTY_PSUPPLYNUMBER_TEXT=Number of Supplies
MENU_LOGVIEW_TEXT=View Saved Log
LEGEND_USED_TEXT=Configured
LABEL_BGIRATE_TEXT=BGI Rate
WRITEPOLICY_WRITE_BACK=Write Back
BBU_MFG_DATE=Mfg Date
OPERATION_INSTRUCTION_TEXT=<html>Select an operation from the left and press go to<br>invoke the selected Operation!</html>
LABEL_EXISTINGARRAY_ONLY=Use Existing Arrays Only
LDRIVE_STATE_OFFLINE=Offline
PROPERTY_VENDORINFO_TEXT=Vendor ID
MSG_SET_CONTROLLER_PROP=Warning: This will set controller properties.
MSG_ASSISTEDCONF_FAILED=Assisted Configuration Failed!
PDTYPE_FC=Fibre Channel
BBU_MAX_ERROR=Maximum Error Margin
MSG_FAILED_FOREIGNCFG=Cannot read Foreign Config!
PROPERTY_FWSTATE_TEXT=Firmware State
RECON_DRIVE_SEL=Drive Selection
ENCL_ELEMSTATUS_UNRECOVERABLE=Unrecoverable
ENCL_ELEMSTATUS_NOT_INSTALLED=Not Installed
PROPERTY_SUBVENDORID_TEXT=SubVendor ID
MSG_NO_FOREIGN_CONFIG=NO Foreign Configuration is found!
MSG_RECON_INPROGRESS=Operation cannot be started while reconstruction is in progress!
MSG_STATUS_GUIDEDFINISH=Change the number, size and other parameters for Virtual Disks and press Next
BBU_TYPE=Battery Type
GUIDED_MSG_TEXT=The capacity mentioned will be used as an approximation while creating the virtual disks.
MENU_LOG_TEXT=Log
MSG_DELPDFROMARRAY_LDEXISTS=Cannot delete Physical Drive from the array because one or more Virtual Disk is defined on this array!
PROPERTY_CACHEFLUSHINTERVAL_TEXT=Cache Flush Interval
BUTTON_GUIDEDCONF_TEXT=Guided Configuration
MSG_IGNORE_FOREIGN_CONFIG=Do you want to ignore the foreign configuration?
MSG_NOARRAY_SELECTED=Please specify an array!
BUTTON_IMPORT_CONFIG=Import Configuration
LABEL_UNUSEDARRAYS_TEXT=Unused Arrays
BUTTON_RECLAIM_TEXT=Reclaim
RAID_LEVEL_5_DISPLAY_STRING=RAID 5
MSG_CLEAR_FOREIGN_CONFIG=This will clear the selected Foreign Configuration! Are you sure?
MSG_CONFIG_FAILED=Cannot write configuration: Unknown Exception!
PROPERTY_RAWSIZE_TEXT=Raw Size
PD_STATE_OFFLINE=Offline
MSG_DISBL_ALARM=Warning: This will start Patrol Read operation.
MSG_INVALID_CTRL=Incorrect controller number specified
MSG_CONF_EXISTS=Configuration exists. You must clear the existing configuration before adding a new one.
MSG_SCSINAME_FAILED=Failed to get SCSI device name
PD_STATE_FAILED=Failed
LEGEND_HIGHLIGHTED_TEXT=Selected VD
BBU_MFG_NAME=Mfg Name
ADAPTER_OPERATION_8_DESC=User configurable task rate priorities for controller
FAILED_SERVER=Failed
MSG_GUIDEDCONFIG_FAILED=Guided Configuration failed!
MANUAL_DRIVE_SELECTION_JTABLE_PORT_COLUMN_HEADING=Port
MANUAL_MODE_FINISH=Finish
MSG_NOLD_SELECTED=Please specify a virtual disk!
LABEL_CAPACITY_TEXT=Total Capacity:
MSG_VERSION_MISMATCH=Mismatch in versions.
BBU_OPERATION_REFRESH_DESC=Rescans and updates the BBU information
RAID_LEVEL_3_DISPLAY_STRING=RAID 3
BBU_OPERATION_SLEEP=Sleep
MSG_NOLD_TEXT=Please create at least one virtual disk and then proceed to next step!
MSG_CONFIRM_ARRAYDELETE=This will delete the Array. Are you sure?
MSG_STATUS_ARRAYSEL=Select one or more physical drive(s) and use the right arrow to move them to the right panel to create arrays
MSG_FW_REBOOT=You must reboot the system to bring the firmware in effect
ABOUT_OSVERSION_TEXT=Operating System Version
DISK_CACHE_UNCHANGED=Unchanged
PDTYPE_SATA=SATA
PROPERTY_PDSTATE_TEXT=Physical Drive State
MSG_INAVLID_PARAM=The input parameter to the command was invalid
LOGICAL_TAB_TEXT=Logical
BUTTON_UPDATE_TEXT=Update
MAXPD_COUNT_TEXT=Maximum PD Count for patrolling:
COER_MODE_128MB=128 MB
PROPERTY_ISBBUPRESENT_TEXT=BBU Present
MSG_STATUS_GUIDED=Select the choices given above and then proceed to next step for guided configuration
LOG_DETAILS_DIALOG=Event Details
PHDRIVE_OPERATION_1_DESC=Changes a drive from OFFLINE state to ONLINE state
PROPERTY_YES_TEXT=Yes
PROPERTY_DEFWRITEPOLICY_TEXT=Default Write Policy
MSG_RECON_CHGRL=This operation cannot be aborted. Do you want to continue?
LABEL_LDNUM_HINT=<html>Desired Number of Virtual Disks : <br>
MSG_LINUX_LIBSYSFS_MISSING=libsysfs is not present in the system
RECON_INSERT_BUTTON_TEXT=Add Drive
LABEL_MB_TEXT=MB
LABEL_REDUNDANCY_ONLY=Redundancy Only
DEV_DIRECT_TEXT=Disk
DIRECT_IO=Direct IO
BBU_AVGTIMEFULL_CAPACITY=Average Time to Full
MSG_INIT_FAILED=Storelib Initialization failed
MSG_OP_TIMEDOUT=Command to driver timed out
PRPOERTY_HOSTINTERFACE_TEXT=Host Interface
PROPERTY_DEVICEPORTCOUNT_TEXT=Device Port Count
PD_CACHE_ENABLE=Enable
PROPERTY_RECONRATE_TEXT=Reconstruction Rate
MSG_SELECT_ARRAY=Please select one or more arrays!
MAX_DRIVE_SELECTION_EXCEEDED_TEXT=RECONSTRUCTION_CARD_TITLE
LABEL_REDUNDANCY_NO=No Redundancy
MSG_LOGIN_EXFAILURE=Login failed: Exception while login!
LEGEND_LDRIVELOCATION_TEXT=Virtual Disk Location
MSG_NOSTOARGEAPI=No Storage Controller Found!
PROPERTY_TEMPERATURE_TEXT=Temperature
LABEL_ELAPSED_TEXT=Elapsed time:
PD_STATE_REBUILD=Rebuild
READ_AHEAD_NONE=No Read Ahead
LABEL_EXISTINGARRAYS_GROUP=Existing Arrays
RECON_FINISH_SEL=Finish
MSG_SETLDPARAM_FAILED=Cannot set virtual disk parameters!
LABEL_USE_ALLARRAYS=Use Existing and New Arrays
LABEL_ADD_HSP=-- Add Hotspare To --
MSG_ABORT_NOT_POSSIBLE=Abort not possible
LABEL_VOLUMEPROP_TEXT=Virtual Disk Parameters
SECOND_TEXT=second
MENU_LOGSAVE_TEXT=Save Log
BUTTON_BROWSE_TEXT=Browse
PHDRIVE_OPERATION_10_DESC=Aborts Locate Physical Drive operation on a physical disk
MSG_DEDICATEDHSP_FAILED=Cannot make dedicated hotspare: Error Code:
LABEL_DEFWRITEPOLICY_TEXT=Default Write Policy:
LABEL_EVENT_TYPE=Event Type:
MSG_SETLDPROP_CONFIRM=Warning: This will set Virtual Disk properties! Are you sure?
MENU_CONFIG_TEXT=Configuration
ADAPTER_TEXT=Controller
ABOUT_OSNAME_TEXT=Operating System Name
LABEL_HOSTNAME_TEXT=Host
MSG_CONFIRM_LOGOVERWRITE=File already exists. Do you want to overwrite?
MSG_INVALID_FILETYPE=This is not a valid FW File!
LABEL_ACCESSPOLICY_TEXT=Access Policy:
MSG_CLEARCONFIG_FAILED=Clear Configuration failed: Unknown Exception
PHDRIVE_OPERATION_2_DESC=Changes a drive from ONLINE state to OFFLINE state
PDTYPE_UNKNOWN=Unknown
GRP_SHOWPROGRESS_TITLE=Group Show Progress
ENCL_ELEMSTATUS_NONCRITICAL=Non Critical
MSG_PROTOCOL_ERROR=Fatal Error: Network protocol error!
WRITEPOLICY_WRITE_THROUGH=Write Through
PROPERTY_SLOTNUMBER_TEXT=Number of Slots
PRODUCT_INFO=MegaRAID Storage Manager
GRAPHICALVIEW_TAB_TEXT=Graphical View
LABEL_TIME_STAMP=Time of Event:
MSG_FLASHFW_CONFIRM=Warning: This will flash the controller firmware! Current firmware version is
MSG_INITTYPE_TEXT=Initialization Type:
PROPERTY_HOSTNAME_TEXT=Host Name
PROPERTY_CLUSTERENABLE_TEXT=Cluster Enable
SORTBYCOMBO_NAME_TEXT=Name
MSG_LDPROGRESS_TEXT=Ongoing Operations on Virtual Disks
NEWLDCREATED_TEXT=New Virtual Disk
MENU_GRINITIALIZE_TEXT=Initialize
BBU_TEMP_STATUS=Temperature
ENCL_ELEMSTATUS_UNKNOWN=Unknown
CACHED_IO=Cached IO
LDRIVE_OPERATION_8=Set Virtual Disk Properties
LDRIVE_OPERATION_7=Abort Initialization
PD_STATE_HOTSPARE=Hot Spare
LDRIVE_OPERATION_6=Start Initialization
MSG_REDUNDANCY_TEXT=Redundancy Type:
LDRIVE_OPERATION_5=Cancel Check Consistency
NEXT_LEARNTIME_TEXT=Next Learn Time (sec):
LDRIVE_OPERATION_4=Check Consistency
BBU_AVGTIMEEMPTY_CAPACITY=Average Time to Empty
MENU_CONFIGWIZARD_TEXT=Configuration Wizard
VOLUME_CANDIDATE_PANEL_ADD=Add
BUTTON_CONNECT_TEXT=Connect
BUTTON_FINISH_TEXT=Finish
LABEL_FWVERSION_TEXT=Framework Version:
LD_ACCESS_RDONLY=Read Only
PHDRIVE_OPERATION_11_DESC=Assigns the UNCONFIGURED GOOD drive as a global hotspare
BBU_GAS_GAUGE=Gas Gauge Status
LABEL_POWER_TEXT=Power Supply
MSG_LOGIN_FAILURE=Login failed: Invalid username or password!
MSG_STATUS_IR_MANUALVDCREATE=<html>Select one Array from the top left panel, change the various properties and press accept
DISK_CACHE_DISABLED=Disabled
MSG_CONFIRM=Are you sure?
MSG_STATUS_FINISH=View the summary and finally press Finish to write the configuration
NOBBU_TEXT=No Battery
BBU_OPERATION_SETPROP_DESC=Defines various Battery Operation Parameters
BBU_OPERATION_LEARN_DESC=Starts a battery calibration cycle
LABEL_STRIPESIZE_TEXT=Stripe Size:
PDTYPE_SAS=SAS
RECON_REMOVE_BUTTON_TEXT=REMOVE
LDRIVE_OPERATION_1_DESC=Deletes the specified virtual disk
MSG_INIT_NOT_COMPLETED=Initialization was not yet completed.
TEXT_CLIENT_TIME=Client time
MSG_GET_PARTITION_FAILED=Failed to get partition. Partition may not exist
PD_STATE_UNCONFGOOD=Unconfigured & Good
FOREIGN_CONFIG_WIZARD=Foreign Configuration Wizard
MSG_LDOS_MAP_INCOMPLETE=The LD to OS drive mapping is not complete. This will happen when fw reports
SELECTED_DRIVES_TEXT=Selected Drives
PROPERTY_ACCESSPOLICY_TEXT=Access Policy
PROPERTY_FLASHSIZE_TEXT=Flash Size
PROPERTY_ISNVRAMPRESENT_TEXT=NVRAM Present
BBU_FW_STATUS=Firmware Status
LABEL_POWERS_TEXT=Power Supplies
PROPERTY_PREDFAILCOUNT_TEXT=Pred Fail Count
PROPERTY_LDCOUNT_TEXT=Virtual Disk Count
ADAPTER_TYPE_PCIX=PCIX
AUTO_MODE_FINISH=Finish
MSG_PDREBUILD_CONFIRM=Warning: This will rebuild the Physical Drive! Are you sure?
PROPERTY_LDDEGRADEDCOUNT_TEXT=Degraded Virtual Disk Count
BBU_ABSCHARGE_STATE=Absolute State of Charge
PROPERTY_LDRIVESIZE_TEXT=Size
ADAPTER_TYPE_PCIE=PCIE
MSG_INVALID_ARRAYSIZE=Please Create arrays with at least 2 physical drives then go to next step!
LABEL_READPOLICY_TEXT=Read Policy:
GUIDED_CONFIG_STEP3=Finish
GUIDED_CONFIG_STEP2=Virtual Disk Parameters
BUTTON_ABORT_TEXT=Abort
GUIDED_CONFIG_STEP1=Guided Config
MSG_AUTOCONFIG_FAILED=Auto Configuration failed!
RECON_DELETE_BUTTON_TEXT=Remove Drive
MSG_ABORTPROG_CONFIRM=Do you want to abort this operation?
BBU_OPERATION_REFRESH=Refresh
PROPERTY_FWBUILDTIME_TEXT=Firmware Build Time
BBU_DESIGN_CAPACITY=Design Capacity
READ_AHEAD_ALWAYS=Always Read Ahead
LABEL_FANS_TEXT=Fans
SORTBYCOMBO_TYPE_TEXT=Type
MSG_CANNOT_ABORT_OP=The operation cannot be aborted!
PHDRIVE_OPERATION_12_DESC=Designates a ready or UNCONFIGURED GOOD drive as a dedicated hotspare to the specified array(s)
LABEL_NOREDUNDANCY_TEXT=No Redundancy
MSG_PDOFFLINE_CONFIRM=Warning: This will make the Physical Drive Offline! Are you sure?
RECON_NOCHANGE_BUTTON_TEXT=Change RAID Level
GRP_INITDLG_TITLE=Group Initialization
BBU_TEXT=Battery Backup Unit
LABEL_LDNAME_TEXT=Name:
STATUS_LOG_SERVER=Displaying log from server
LDRIVE_OPERATION_2_DESC=Identifies virtual disk members by blinking the associated physical disk(s) activity LED
PROPERTY_CURWRITEPOLICY_TEXT=Current Write Policy
MSG_DELARRAY_ILLEGAL=Cannot delete new Array: Illegal Configuration Exception!
LABEL_DOMAIN_ADDR=Connect to remote Framework at:
MSG_INVALID_LDOPTION=cannot create Virtual Disk: Invalid input parameters for creating Virtual Disk!
NEWLD_PROPERTY_INPUT=Virtual Disk Properties
PROPERTY_ISCLUSTERACTIVE_TEXT=Cluster Active
LOGGERHEADER_DESCRIPTION_TEXT=Description
LABEL_OSNAME_TEXT=OS
MENU_FILE_TEXT=File
FULL_INIT_TEXT=Full Initialization
TEXT_SEC_FRM_REBOOT=seconds from reboot
PROPERTY_No_TEXT=No
PROPERTY_HOSTPORTCOUNT_TEXT=Host Port Count
BBU_TYPE_BBU=BBU
WRITEPOLICY_WRITE_ADAPTIVE=Write Adaptive
ABOUT_SERVERINFO_TEXT=Server Info
LABEL_SELECTLD_TEXT=Select Excluded Virtual Disks:
NO_FIRMWARE_FILE=Please specify a valid firmware file!
PROPERTY_LDRIVERL_TEXT=Current RAID Level
MSG_CONFIRM_ADDCFG=<html>This operation will try to configure the controller based on a saved configuration.<br>Unstable conditions might arise due to difference in physical devices in the two configurations.<br>Are you sure ?</html>
ABOUT_HOSTNAME_TEXT=HostName
MENU_LOGCLEAR_TEXT=Clear Log
HEALTHY_SERVER=Healthy
ACCESS_READ_WRITE=Read Write
PHDRIVE_OPERATION_13_DESC=Removes the hotspare assignment and changes the drive state to UNCONFIGURED GOOD
ADAPTER_OPERATION_1_DESC=Sets controller alarm to on to alert user when the controller
MENU_HELP_TEXT=Help
PROPERTY_REVLEVEL_TEXT=Revision Level
PD_CACHE_DISABLE=Disable
BUTTON_AUTOCONF_TEXT=Auto Configuration
SERVERINFO_LABEL_TEXT=Server Information
LABEL_REDUNDANCY_GROUP=Redundancy
PROPERTY_HOSTOSARCH_TEXT=OS Architecture
LDRIVE_STATE_PARTDERGRADED=Partially Degraded
MSG_GETRDLEVELSIZE_FAILED=Cannot get possible RAID level and size: Unknown Exception!
MINUTE_TEXT=minute
LABEL_LDSUMMARY_TEXT=Virtual Disk Summary
MENU_OPERATION_TEXT=Operations
ACCEPT_ARRAY=Accept
MSG_DELETELD_CONFIRM=Warning: This will delete the Virtual Disk! Are you sure?
LABLE_KERNELVERSION_TEXT=Kernel Version:
PD_STATE_UNCONFBAD=Unconfigured & Bad
LDRIVE_OPERATION_3_DESC=Aborts the Locate Virtual Disk operation
PROPERTY_COERCEDSIZE_TEXT=Coerced Size
PHDRIVE_OPERATION_5_DESC=Replaces a drive of a degraded array that is marked missing with an UNCONFIGURED GOOD drive
PROPERTY_REBUILDRATE_TEXT=Rebuild Rate
PROPERTY_HOSTOSVER_TEXT=OS Version
MSG_FATAL_RESCAN_ERROR=Fatal error: rescan failed! Exiting...
PROPERTY_DEVICEPORTADDRESS_TEXT=Device Port Address
DEGRADED_SERVER=Degraded
ENCLOSURE_TEXT=Enclosure
PROPERTY_FWVERSION_TEXT=Firmware Version
LABEL_NUMVIRTUALDISK_TEXT=Virtual Disk Count:
MSG_CONFIRM_LOGSAVE_BEFORE_DELETE=Do you want to save the existing log?
OPERATION_RECON_TEXT=Reconstruction
FREQUENCY_TEXT=Execution Frequency:
LABEL_ESTIMATED_TEXT=Estimated time left:
LABEL_ARRAY_FREE=Arrays with Available Space
MSG_NOCONFIG_POSSIBLE=No new Virtual Disk can be added to the configuration!
LABEL_WITHREDUNDANCY_TEXT=With Redundancy
PROPERTY_MEMUNCORRECTABLEERRORCOUNT_TEXT=UnCorrectable Error Count
MSG_INVALID_DATA=Invalid data sent to driver
MSG_INVALID_OPSTATE=The drive is not in a state to perform
LD_ACCESS_BLOCKED=Blocked
GUIDED_CONFIG_STEP=Finish
MSG_INVALID_IPADDR=Invalid IP Address!
AUTOLEARN_PERIOD_TEXT=Auto Learn Period (sec):
MENU_RECONWIZARD_TEXT=Reconstruction Wizard
COER_MODE_1GB=1 GB
MSG_FULLACCESS_DENIED=<html>Full Access denied because another user is logged in<br> with full access from IP Address:
MSG_UNKNOWN_ERROR=Operation Failed
OPMODE_MANUAL=Manual
PROPERTY_ALARMENABLE_TEXT=Alarm Enabled
BBU_NEXTLEARN_TIME=Next Learn Time
PHDRIVE_TEXT=Physical Drive
MSG_DATA_BAKUP=It is advisable to backup data before this operation. Are you ready?
ABOUT_OKBUTTON_TEXT=OK
PROPERTY_SASADDR_TEXT=Backend SAS Address
PROPERTY_ISALARMPRESENT_TEXT=Alarm Present
LOGINMODE_TEXT=Login Mode:
PHDRIVE_OPERATION_14_DESC=Spins down the selected drive to ready it for removal
ADAPTER_OPERATION_2_DESC=Sets the audible controller alarm option to off
PROPERTY_BIOSVERSION_TEXT=BIOS Version
MSG_CONFIRM_LOGDELETE=This will delete the log. Are you sure?
BUTTON_ADDHSP_TEXT=Add HotSpare
CHECKBOX_WITHFIX_TEXT=Automatically Fix errors
LABEL_UNCONF_PDLIST=Unconfigured Physical Drive List
LABEL_NO_EXISTINGARRAY=Do not use Existing Arrays
PROPERTY_WRITEPOLICY_TEXT=Write Policy
MSG_REMOVEHSP_FAILED=Cannot remove hotspare!
BUTTON_CANCEL_FOREIGN_CONFIG=Cancel
MSG_LD_ZERO=Total Number of Virtual Disks must be greater than 0!
PROPERTY_TAB_TEXT=Properties
MENU_ADVANCED_OP=Advanced Operations
MSG_CONN_LOST=Connection to the server has been lost. Do you want to re-login?
LDRIVE_OPERATION_4_DESC=Starts a check consistency operation on the selected virtual disk
PHDRIVE_OPERATION_6_DESC=Marks an offline/failed drive of a degraded array as missing in order to prepare for drive replacement
OPERATION_MODE_TEXT=Operation Mode:
MSG_DELPDFROMARRAY_FAILED=Cannot delete Physical Drive from the array!
MSG_RAID0_NOTPOSSIBLE=RAID 0 is not possible as there is dedicated hotspare for the specified arrays
RAID_LEVEL_0_DISPLAY_STRING=RAID 0
MSG_ABORTALL_CONFIRM=This will abort all the operations shown above! Are you sure?
MENU_EXIT_TEXT=Exit
STATUS_LOG_LOCAL=Displaying log from file
PROPERTY_MEMCORRECTABLEERRORCOUNT_TEXT=Correctable ErrorCount
LABEL_CCRATE_TEXT=Check Consistency Rate
PROPERTY_DEVICEID_TEXT=Device ID
PROPERTY_SLOT_NUMBER=Slot Number
OPERATION_BGI_TEXT=Background Initialize
MANUAL_DRIVE_SELECTION_JTABLE_CAPACITY_COLUMN=Drive Capacity (in MB)
PROPERTY_PRODUCTINFO_TEXT=Product Info
MENU_GRCHKCONSISTENCY_TEXT=Check Consistency
BGINIT_DISABLE=Disabled
BUTTON_SELECTALL_TEXT=Select All
MSG_FAIL_SAVE_CONFIG=Save configuration failed
BUTTON_START=Start
LABEL_INITSTATE_TEXT=Init State:
SERVER_TEXT=Server
MSG_THREAD_CREATE_FAILED=Thread creation failed
PROPERTY_HOSTSTATUS_TEXT=Status
MSG_CMDFAILED_OS=Command failed by Operating System
MENU_LOADPLUGINS_TEXT=Load Plugins
MAX_DRIVE_SELECTION_TEXT=Select Physical Drives
LOGGERHEADER_DATETIME_TEXT=Date / Time
LABEL_RAIDLEVEL_TEXT=RAID Level:
OPERATION_PATROLREAD_TEXT=Patrol Read
MSG_SELECTHOST=Please selected a host from the list!
MSG_LINUX_SYSFS_ERROR=An error occurred while accessing sysfs
PROPERTY_DEVICETYPE_TEXT=Device Type
PROPERTY_NO_TEXT=No
PROPERTY_PRODUCTID_TEXT=Product ID
SORTBYCOMBO_IPADDRESS_TEXT=IP Address
PROPERTY_STRIPESIZE_TEXT=Stripe Size
PHDRIVE_OPERATION_15_DESC=Cancels Prepare For Removal operation on a physical disk
BBU_SERIALNO=Serial No
ADAPTER_OPERATION_3_DESC=Temporarily quiets the controller alarm for the current event
LABEL_SENSORS_TEXT=Sensors:
MSG_ABOUT_LINE2=Copyright \u00a9 2006 LSI Logic Corporation. All Rights Reserved.
RECON_MODE_SEL=Reconstruction Mode
MSG_ABOUT_LINE1=Client Build:
LOGINMODE_FULLACCESS=Full Access
PROP_PDSASADDR_TEXT=SAS Address
LEGEND_UNUSABLE_TEXT=Reserved
PD_CACHE_UNCHANGED=Unchanged
VALUE_NOT_AVAILABLE=Not Available
PHDRIVE_OPERATION_15=Undo Prepare For Removal
PHDRIVE_OPERATION_14=Prepare For Removal
PHDRIVE_OPERATION_13=Remove Hotspare
PHDRIVE_OPERATION_12=Make Dedicated Hotspare
MSG_INIT_NOT_DONE=Storelib Initialization not completed
PHDRIVE_OPERATION_11=Make Global Hotspare
MSG_INVALID_CMD=Invalid Operation
PHDRIVE_OPERATION_10=Stop Locating Physical Drive
MSG_INVALID_FLASH_IMAGE=The firmware flash image is invalid
MSG_RECON_NOTALLOWED=Reconstruction on this Volume is not allowed!
BBU_FULL_CAPACITY=Full Capacity
MSG_NO_CONNECTION=Fatal Error: Cannot connect to Framework!
LDRIVE_OPERATION_5_DESC=Cancels the current check consistency operation on the selected virtual disk
OPMODE_DISABLED=Disabled
MSG_CONFIG_CORRUPTED=Configuration Corrupted!
PHDRIVE_OPERATION_7_DESC=This option will start rebuild on selected offline/failed drive
BUTTON_CLEAR_CONFIG=Clear Configuration
LOGGERHEADER_ERRORLEVEL_TEXT=Error Level
PROPERTY_MEMORYSIZE_TEXT=Memory Size
VOLUME_CANDIDATE_PANEL_REMOVE=Remove
ACCESS_READ_ONLY=Read Only
ADAPTER_TYPE_SAS_3G=SAS_3G
PROPERTY_IOPOLICY_TEXT=IO Policy
PROPERTY_READPOLICY_TEXT=Read Policy
MANUAL_DRIVE_SELECTION_JTABLE__DEVID_COLUMN=Device ID
MSG_CLEAR_FOREIGN_FAILED=Clear Foreign Config failed!
PROPERTY_DISKCACHEPOLICY_TEXT=Disk Cache Policy
PROP_SCSIDEVTYPE_TEXT=SCSI Device Type
WRITE_BACK=Write Back
RAID_LEVEL_TEXT=RAID
PROPERTY_RAIDLEVEL_TEXT=RAID Level
LABEL_STATE_TEXT=State:
BBU_OPERATION_LEARN=Learn
PROPERTY_COERCIONMODE_TEXT=Coercion Mode
BBU_DESIGN_VOLTAGE=Design Voltage
LDRIVE_STATE_DEGRADED=Degraded
SORTBYCOMBO_OS_TEXT=OS
RECON_ADD_BUTTON_TEXT=ADD
NEWLD_TEXT=New Virtual Disks
MSG_LINUX_SYSFS_NOTMOUNTED=sysfs is not mounted in the system
COER_MODE_NONE=None
LD_ACCESS_RDWRITE=Read Write
ACCESS_BLOCKED=Blocked
LABEL_FAN_TEXT=Fan
MSG_NO_MORE_VD=No more virtual disk can be added
MSG_IMPORT_FOREIGNCFG_SUCCESS=Foreign Configuration was imported successfully!
MSG_NOLD_POSSIBLE=Please Create at least one array then go to next step!
PROPERTY_HOSTOS_TEXT=Operating System
MSG_NOSERVER_FOUND=No Servers found!
MENU_LOGREMOTE_TEXT=Revert to Current Log
PROPERTY_PATROLREADRATE_TEXT=Patrol Read Rate
ADAPTER_OPERATION_4_DESC=Updates controller firmware with a specified firmware image
BUTTON_ACCEPT_TEXT=Accept
MSG_NOASSISTED_POSSIBLE=No configuration possible for the given parameters!
PROPERTY_CCRATE_TEXT=Consistency Check Rate
LDRIVE_TEXT=Virtual Disk
IOPOLICY_DIRECT=Direct IO
RAID_TEXT=RAID
TEXT_GUID=GUID
MSG_SAVELOG_INVALIDFILE=Cannot save to the file specified! Device not ready!
BUTTON_NEXT_TEXT=Next
OPERATION_FGI_TEXT=Foreground Initialize
OPMODE_AUTO=Auto
BUTTON_DESELECTALL_TEXT=Deselect All
STATUS_LOG_FILE_ERROR=No Valid Log found in
LDRIVE_OPERATION_6_DESC=Starts an initialization operation on the selected virtual disk
MSG_ILLEGAL_CONFIG=Cannot create new Array: Illegal Configuration Exception!
PHDRIVE_OPERATION_8_DESC=Cancels the current rebuild operation on a physical drive
PROPERTY_PDTYPE_TEXT=Physical Drive Type
MSG_MAXLDNUM_EXCEEDED=Total number of Virtual Disks must not exceed
MSG_SELCCLDRIVE_TEXT=Select Virtual Disks:
OPERATION_REBUILD_TEXT=Rebuild
NEW_ARRAY_TEXT=New Array
OPERATIONS_TAB_TEXT=Operations
PROPERTY_VENDORID_TEXT=Vendor ID
MSG_CONFIG_NOTALLOWED=Configuration on this adapter is not allowed!
ABOUT_OSARCHI_TEXT=Operating System Architecture
MSG_UNKNOWN=Unknown Exception!
GRP_CONCHECK_TITLE=Group Consistency Check
LABEL_RAID_TEXT=RAID
BBU_RUNTIMEEMPTY_CAPACITY=Run time to Empty
MSG_STATUS_MANUALVDCREATE=<html>Check one or more Array holes from the top left panel, change the various properties and press accept
MSG_INVALID_INPUT=Invalid input specified!
BUTTON_MODIFY_TEXT=Modify
PASSWORD_TEXT=Password:
SERVERS_BUTTON_TEXT=Servers
LABEL_PATROLREADRATE_TEXT=Patrol Rate
ABOUT_IPADDRESS_TEXT=IP Address
READ_AHEAD_ADAPTIVE=Adaptive Read Ahead
BBU_OPERATION_SLEEP_DESC=Sets the BBU to low power storage mode
BBU_REM_CAPACITY=Remaining Capacity
ARRAY_WITH_HOLES=Arrays with Free Space
PROPERTY_BIOSBUILDTIME_TEXT=BIOS Build Time
MODE_SEL_STEP=Mode Selection
MSG_IMPORT_FOREIGNCFG_FAILED=Import foreign configuration failed!
LABEL_REDUNDANCY_TRY=Redundancy when possible
ADAPTER_OPERATION_5_DESC=Sets patrol read options for configured physical drives
BBU_VOLTAGE_STATUS=Voltage
BUTTON_OPERATION_GO=Go
MSG_NOT_RESPONDING=Framework not responding!
MENU_GRPROGRESS_TEXT=Show Progress
MENU_FOREIGN_CONFIG=Scan For Foreign Config
MSG_CANNOT_ABORT=Cannot be aborted!
MSG_MEMALOC_FAILED=Failed to allocate memory
WRITE_THROUGH=Write Through
DISK_CACHE_ENABLED=Enabled
LABEL_TEMPERATURE_TEXT=Temperature
MSG_MAXEVENT_EXCEEDED=The maximum number of events that can be retrieved has exceeded
BBU_OPERATION_SETPROP=Set BBU Properties
LDRIVE_OPERATION_7_DESC=Cancels the current initialization operation on the selected virtual disk
PHDRIVE_OPERATION_9_DESC=Identifies a physical disk by blinking the associated physical disk activity LED
BUTTON_CANCEL_TEXT=Cancel
MSG_MAXCONFIG_EXCEEDED=Max Configuration limit exceeded!
ADAPTER_TYPE_ISCSI=Unknown
MENU_RESCAN_TEXT=Rescan
BUTTON_MANUALCONF_TEXT=Manual Configuration
LABEL_SENSOR_TEXT=Sensor
TEXT_ARRAY_ROW=Row Index
MENU_PLUGINS_TEXT=Plugins
BUTTON_ABORTALL_TEXT=Abort All[A]
ENCL_ELEMSTATUS_OK=OK
BUTTON_LOGIN_TEXT=Login
USERNAME_TEXT=User Name:
HOLE_TEXT=Hole
MSG_BIG_LDNAME=Virtual Disk Name is too big!
MENU_GROUPOPERATION_TEXT=Group Operations
BUTTON_CLOSE_TEXT=Close[C]
PROPERTY_SERIALNO_TEXT=Serial No
LOGINMODE_VIEWONLY=View Only
PROPERTY_LDSTATE_TEXT=Virtual Disk State
PROPERTY_MEDIACOUNT_TEXT=Media Error Count
PROPERTY_DISKWRITECACHEDISABLE_TEXT=Disk Write Cache Disable
LDRIVE_STATE_OPTIMAL=Optimal
MSG_LDDELETE_DATA_LOST=Data contained in the virtual drive will be lost. Do you want to continue?
DEV_TAPE_TEXT=TAPE
PDTYPE_SCSI=SCSI
MSG_ADDHOTSPARE_FAILURE=Cannot add Hotspare to the array!
LABEL_BACKGROUNDINIT_TEXT=Background Initialization:
CHECKBOX_FASTINIT_TEXT=Fast Initialization
PROPERTY_BGIRATE_TEXT=BGI Rate
MSG_CONFIRM_CFGOVERWRITE=This will overwrite the existing configuration. Are you sure?
MANUAL_MODE_LOGICALDRIVE=Virtual Disk Creation
BUTTON_REMOVEHSP_TEXT=Remove HotSpare
PROPERTY_HOSTPORTADDRESS_TEXT=Host Port Address
MENU_HELPME_TEXT=Help
UNUSED_ARRAYS_TEXT=Unused Arrays
LABEL_PATROL_CONTINUOUS=Continuous Patrolling
BBU_CURRENT_STATUS=Current
SELECT_RAID_LEVEL_TEXT=New RAID Level
BBU_RELCHARGE_STATE=Relative State of Charge
PROPERTY_LDFAILEDCOUNT_TEXT=Failed Virtual Disk Count
MSG_NO_OP_SELCTED=Please select an operation !
ADAPTER_OPERATION_6_DESC=Starts patrol read operation on the selected physical drives
LABEL_VOLUMENAME_TEXT=Volume Name :
ARRAY_TEXT=Array
MSG_LDINIT_DATA_LOST=Initialization will result in data loss on the selected Virtual Disk(s). Proceed ?
PROPERTY_LDRIVENAME_TEXT=Name
MSG_FAIL_ADD_CONFIG=Add configuration failed
MENU_ABOUT_TEXT=About
MSG_NOMORE_ARRAY=No more array can be created : Maximum Number is :
OPERATION_CLEAR_TEXT=Clear
ENCL_ELEMSTATUS_NOT_AVAILABLE=Not Available
OPERATION_CC_TEXT=Check Consistency
LDRIVE_OPERATION_8_DESC=Defines virtual disk operation parameters
PROPERTY_FANNUMBER_TEXT=Number of Fans
ADAPTER_OPERATION_8=Set Adjustable Task Rates
PROPERTY_HOSTIP_TEXT=IP Address
ADAPTER_OPERATION_7=Stop Patrol Read
PORT_TEXT=Port
ADAPTER_OPERATION_6=Start Patrol Read
MSG_DELARRAY_FAILED=Cannot delete new Array: Unknown Exception!
ADAPTER_OPERATION_5=Set Patrol Read Properties
ADAPTER_OPERATION_4=Flash Firmware
ADAPTER_OPERATION_3=Silence Alarm
VERSIONINFO_LABEL_TEXT=Version Information
ADAPTER_OPERATION_2=Disable Alarm
MSG_STATUS_MODESEL=Select one of the modes of configuration
ADAPTER_OPERATION_1=Enable Alarm
ENCL_ELEMSTATUS_CRITICAL=Critical
MSG_PDPROGRESS_TEXT=Ongoing Operations on Physical Drives
PHYSICAL_TAB_TEXT=Physical
MSG_ARRAYCREATIONIR_FAILED=Cannot create new Array: At least 2 physical drives needed!
PROPERTY_NVRAMSIZE_TEXT=NVRAM Size
MSG_MAXPDINARRAY_EXCEEDED=No more Physical Drive can be added to this array: Maximum Number is:
LABEL_DISKCACHEPOLICY_TEXT=Disk Cache Policy:
PROPERTY_PRODUCTNAME_TEXT=Product Name
HOUR_TEXT=hour
LABEL_SORTBY_TEXT=Sort By
LABEL_IPADDRESS_TEXT=IP Address
LABEL_SIZE_TEXT=Size (in MB):
SELARRAY_DEDICATEDHSP_TEXT=Select arrays
LABEL_RECONRATE_TEXT=Reconstruction Rate
BBU_CYCLE_COUNT=Cycle Count
BUTTON_BACK_TEXT=Back
IBBU_TEXT=IBBU
DEV_CDROM_TEXT=CDROM
MSG_DEVNOT_RESPONDING=Device not responding!
HOTSPARE_TEXT=HotSpare Physical Drive
MSG_STATUS_AUTOCONFIG=Select modify to make desired changes to auto configuration parameters or Select Finish to complete Auto Configuration Wizard.
MSG_LINUX_SCSIMAP_FAILED=The SCSI device to SCSI address mapping failed
BBU_AUTOLEARN_PERIOD=Auto Learn Period
MSG_DELETLD_FAILED=Cannot delete newly created Virtual Disk: Unknown Exception!
MSG_PDREMOVEHSP_CONFIRM=Warning: This will remove the hotspare drive! Are you sure?
MSG_MUTEX_CREATE_FAILED=Mutex creation failed
MSG_NOADMIN_RIGHT=This user does not have Administrator right for this system!
PD_STATE_ONLINE=Online
LABEL_VOLUMEID_TEXT=Volume ID:
LABEL_REBUILDRATE_TEXT=Rebuild Rate
PROPERTY_LDONLINECOUNT_TEXT=Online Virtual Disk Count
PHDRIVE_OPERATION_9=Locate Physical Drive
PHDRIVE_OPERATION_8=Abort Rebuild
PHDRIVE_OPERATION_7=Rebuild
PHDRIVE_OPERATION_6=Mark Physical Drive as Missing
COMBO_SELECTLDRIVE_TEXT=-- Select Virtual Disk (VD) --
PHDRIVE_OPERATION_5=Replace Missing Physical Drive
PHDRIVE_OPERATION_4=Stop Patrol Read
PHDRIVE_OPERATION_3=Start Patrol Read
PHDRIVE_OPERATION_2=Make Drive Offline
PHDRIVE_OPERATION_1=Make Drive Online
ADAPTER_OPERATION_7_DESC=Stops the current patrol read operation
MSG_NOMORE_ARRAY_INONESHOT=No more array can be created in one shot
LABEL_FILETYPE_ROM=ROM Files (*.rom)
POSTPONELEARN_DELAY_TEXT=Postpone Learn Delay Interval (hours):
MSG_CONFIG_OS_DRIVE_PRESENT=This configuration contains at least one OS drive. Configuration cannot be cleared.
MSG_OS_LD=This is an OS drive. This virtual drive cannot be deleted.
PROPERTY_ENCLOSURE_TYPE_TEXT=Enclosure Type
PROPERTY_ENCLOSURE_TYPE_VIRTUAL=Virtual
MSG_NEW_VERSION=and the new version is
MENU_ADD_CONFIG=Add Configuration from file
MENU_SAVE_CONFIG=Save Configuration
MENU_CLEAR_CONFIG=Clear Configuration
OPERATION_SELECTION_TEXT=Selected Operation :
OPERATION_DESC_TEXT=Description :
LDRIVE_OPERATION_1=Delete Virtual Disk
LDRIVE_OPERATION_2=Locate Virtual Disk
LDRIVE_OPERATION_3=Stop Locating Virtual Disk
MSG_RECONS_ERR_UNKNOWN=Reconstruction failed : Unknown error
MSG_PD_TYPE_WRONG=Configuration is not possible with SAS/SATA mixed drives
MSG_SAS_SATA_MIX_NOT_ALLOWED=Configuration is not possible with SAS/SATA mixed drives. Please select same types of drive to add into this array.
TXT_DAYS= Days
RECON_DRIVE_ADD_MESSAGE=<HTML>Select drive(s) that you want to add to the volume.<BR>You may select a maximum of {0,number} drives</HTML>
RECON_DRIVE_REMOVE_MESSAGE=<HTML>Select drive that you want to remove to the volume.<BR>You may select a maximum of {0,number} drive</HTML>
MSG_CLEARCONFIG_CONFIRM=Clearing the configuration will destroy virtual disks and result in data loss on the selected controller. Proceed ?
QUICK_INIT_TEXT=Fast Initialization
NO_INIT_TEXT=No Initialization
MSG_CONFIRM_LDRECLAIM=This will delete the newly created Virtual Disk! Are you sure?
AUTOLEARN_MODE_TEXT=Auto Learn Mode:
AUTO_LEARN_WARN=Warn
AUTO_LEARN_MODE=Auto Learn Mode
TXT_PROGRESS_HRS= Hrs
TXT_PROGRESS_MIN= Min
TXT_PROGRESS_SEC= Sec
ZCR_LEGACY_TEXT=ZCR Legacy
MSG_WRITE_BACK_WARN=Write-through is recommended for maximum data integrity when no battery is present !
MSG_COMPONENT_NOT_RUNNING_ERROR=Error : One or more target component is not running.
MSG_CONFIGURATOR_NOT_RESPONDING_ERROR=Error : Configurator not responding.
MSG_CONFIGURATOR_INVALID_OPERATION_ERROR=Error : Invalid operation.
MSG_CONFIGURATOR_OPERATION_FAILED_ERROR=Error : Operation failed.
MSG_CONFIGURATOR_EXCEPTION_ERROR=Error : Unknown exception.
MSG_OS_LD_INIT=This is an OS drive. This virtual drive cannot be initialized.
VD_WR_POLICY_BAD_BBU=Use Write Through for failed or missing battery
ENCLOSURE_ID_TEXT=ID
BADBBU_PRE=Yes
BADBBU_ABS=No
PROPERTY_BADBBUPOLICY_TEXT=Write Through for failed/missing battery
MSG_EXTERNAL_LUNCH_TIMEOUT=Login failed : Due to timeout!
MSG_CLEAR_FOREIGN_CONFIG_SUCCESS=Foreign Configuration Cleared Successfully !
PHDRIVE_TEXT_DRIVE=Drive
PHDRIVE_TEXT_DRIVE_UNCONFIGURED= - Unconfigured
PHDRIVE_TEXT_DRIVE_CONFIGURED= - Configured
MSG_LDINIT_REFRSH_VD=VD list is not updated! Do you want to update?
####################################################################
# IMAGE FILE NAMES #
####################################################################
LABEL_TEMPERATURE_ICON=temperature.jpg
LABEL_FAN_ICON=fan.jpg
LABEL_POWER_ICON=powersupply.jpg
ENCLOSURE_BOX_IMAGE=enclosurebox.jpg
UNCONF_ENCLPD_IMAGE=enclosurepd.jpg
ONLINE_ENCLPD_IMAGE=onlinepd_in_enclosure.jpg
OFFLINE_ENCLPD_IMAGE=offlinepd_in_enclosure.jpg
EMPTYSLOT_ENCL_IMAGE=emptyslot_in_enclosure.jpg
HOTSPARE_ENCLPD_IMAGE=hotsparepd_in_enclosure.jpg
REBUILD_ENCLPD_IMAGE=rebuildpd_in_enclosure.gif
DEFAULT_HOST_IMAGE=host.jpg
DEGRADED_HOST_IMAGE=degraded.jpg
FAILED_HOST_IMAGE=failed.jpg
LSI_LOGO_IMAGE=lsi_logo.jpg
SELECTED_HOST_IMAGE=selected_host.jpg
RIGHT_ARROW=rightarrow.jpg
LEFT_ARROW=leftarrow.jpg
ARRAY_IMAGE=array.jpg
PHDRIVE_IMAGE=phdrive.jpg
ADAPTER_IMAGE=controller_standard.jpg
PORT_IMAGE=port.jpg
HOTSPARE_IMAGE=hotspare.jpg
UNCONFIG_IMAGE=unconfig.jpg
ENCLOSURE_IMAGE=enclosure.jpg
VOLUME_IMAGE=volume.jpg
AUTO_CONF=wrench.jpg
MANUAL_CONF=hammer.jpg
GUIDED_CONF=guided.jpg
RECON_INSERT_IMG=plus.jpg
RECON_DELETE_IMG=Scissor.jpg
RECON_CHANGE_IMG=thread_chaser.jpg
RECON_DOWN_IMG=arrowdown.jpg
RECON_UP_IMG=arrowup.jpg
UNCONFIGURED_IMAGE=unconfig.jpg
PHDRIVE_SCSI_IMAGE=scsidrive.jpg
NEEDS_ATTENTION_IMAGE=needatn.jpg
PHDRIVE_FC_IMAGE=phdrive.jpg
PHDRIVE_SAS_IMAGE=sasdrive.jpg
BANNER_SMALL_IMAGE=small_banner.jpg
PHDRIVE_SATA_IMAGE=satadrive.jpg
DEGRADED_IMAGE=degraded.jpg
LDRIVE_IMAGE=volume.jpg
SERVER_IMAGE=server.jpg
BBU_IMAGE=battery.jpg
BANNER_IMAGE=banner.jpg
REBUILD_IMAGE=pdrebuild.jpg
FAILED_IMAGE=failed.jpg
PARTIAL_DEGRADED_IMAGE=partialdegraded.png
TAPE_IMAGE=tape.jpg
CDROM_IMAGE=cdrom.jpg
PHDRIVE_SAS_IMAGE_UNCFG=sasdrive_uncfg.jpg
PHDRIVE_SATA_IMAGE_UNCFG=satadrive_uncfg.jpg
PHDRIVE_SCSI_IMAGE_UNCFG=scsidrive_uncfg.jpg
UNCONFIGURED_IMAGE_UNCFG=unconfig_uncfg.jpg
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.