#################################################################### # Resource File Version 1.0 # # TEXT LABEL NAMES # #################################################################### #start MSG_UNSUPPROTED_MIX_OF_DRIVES=The drive group contains an unsupported mix of drives. You cannot mix TEXT_DRIVE_TYPE_SSD=SSD MSG_UNSUPPROTED_MIX_OF_DRIVES_TEXT1=drives with TEXT_DRIVE_TYPE_NON_SSD=non-SSD MSG_UNSUPPROTED_MIX_OF_DRIVES_TEXT2=drives. TEXT_DRIVE_TYPE_SSD_SAS=SSD(SAS) TEXT_DRIVE_TYPE_SSD_SATA=SSD(SATA) MSG_ADD_REMOVE_INPROGRESS = Operation can not be started while Add/Remove physical drive in configuration is in progress ! MSG_NO_AVAILABLE_PD_FOUND = Patrol Read is disabled. CHANGE_DRIVE_SECURITY_ENTER_PASSPHRASE_WIZARD_PAGE_TITLE=Change Security Settings - Password BUTTON_IMPORT_LABEL=I(m)port: Import logical configuration from all foreign drives. BUTTON_CLEAR_LABEL=(C)lear: Remove logical configuration from all foreign drives. BUTTON_ADVANCED_LABEL=(A)dvanced: Preview, import and clear specific foreign configurations. MESSAGE_FOREIGN_CONFIG_DETECTED=Foreign drives were detected. You must import or clear these<br>drives before they can be used." MSG_FOREIGN_CONFIG_CLEARED=The foreign configuration was cleared successfully. TITLE_FOREIGN_CONFIG_CLEARED=Clear Successful MSG_CLEAR_FOREIGNCFG_SUCCESS_RESCAN=<html>Foreign Configuration was cleared successfully. <br>More foreign configurations were detected.<br>Would you like to re-scan for foreign configurations?<br><br></html> MSG_IMPORT_FOREIGNCFG_SUCCESS_RESCAN=<html>Foreign Configuration was imported successfully.<br>More foreign configurations were detected.<br>Would you like to re-scan for foreign configurations?<br><br></html> MSG_DELETE_CONFIG_CONFIRM_TITLE=Confirm Clear Configuration MSG_DELETE_CONFIG=<html>You have chosen to clear the configuration. This will<br>destroy all virtual disks. All data on all virtual disks<br> will be lost MSG_DELETE_CONFIG2=and the preserved cache will be<br>discarded MSG_DELETE_CONFIG3=Are you sure you want to clear the configuration?</html> MSG_CONFIRM_CFG_FILE_OVERWRITE=File already exists. Do you want to overwrite ? DEDICATED_HSP_DESC=<html>A dedicated hot spare will only replace problematic drives on selected drive groups.<br><br></html> NO_FIRMWARE_FILE1=The specified file is not a valid NO_FIRMWARE_FILE2=file.\n Please check the file path and try again. MSG_SELECT_DESTINATION_COPYBACK_DRIVE=Please select atleast one destination drive to copyback. MSG_LOGIN_CIMOM_FAILURE=Login failed : Unable to connect to CIMOM server! DISCARD_PINNED_CACHE=<html>When you discard the preserved cache, the data contained in the preserved cache will be<br>permanently lost. VIRTUAL_DRIVES_CONFIRM=<html><br>Would you like to delete the above offline virtual drives?</html> MANAGE_PRESERVED_CACHE_TEXT=Manage preserved cache found on the controller. RETAIN_PRESERVED_CACHE=Controller will retain the remaining preserved cache. PRESERVED_CACHE_TEXT=Operation cannot be performed with preserved cache. LABEL_SECURE_DRIVE_GROUPS=(S)ecure Drive Groups: MSG_DELETELD_TEXT1=<html>You have chosen to delete Virtual Disk MSG_DELETELD_TEXT2=All data<br> on the virtual disk will be lost MSG_DELETELD_TEXT3=and the preserved<br> cache for this virtual disk will be discarded MSG_DELETELD_TEXT4=Are you sure you want to delete Virtual Disk VD1_RAID_VOLUME_SIZE=Virtual Drive 1, RAID 1 Volume, 1000GB VD2_RAID_VOLUME_SIZE=Virtual Drive 2, RAID 1 Volume, 1000GB VD3_RAID_VOLUME_SIZE=Virtual Drive 3, RAID 1 Volume, 1000GB VD4_RAID_VOLUME_SIZE=Virtual Drive 4, RAID 1 Volume, 1000GB VD5_RAID_VOLUME_SIZE=Virtual Drive 5, RAID 1 Volume, 1000GB VD6_RAID_VOLUME_SIZE=Virtual Drive 6, RAID 1 Volume, 1000GB VD7_RAID_VOLUME_SIZE=Virtual Drive 7, RAID 1 Volume, 1000GB VD8_RAID_VOLUME_SIZE=Virtual Drive 8, RAID 1 Volume, 1000GB REKEY=Rekey operation failed. NO_FOREIGN=No Foreign Config OPENED_SCREEN=Opened Screen for : VOLT=V SELECT_REPLACE=Select Replacement CONTOLLER_FIRMWARE=controller firmware WARNING_FLASH=Warning : This will flash the CURRENT_VERSION=! Current version is #PRODUCT_INFO1=RAID Web Console 2 PRODUCT_INFO1=MegaRAID Storage Manager DISCARD_PINNED_CACHE1= This data may belong to the foreign configuration that you should import<br>before discarding the cache. DISCARD_PINNED_CACHE2=<br><br>Are you sure you want to discard the preserved cache for the selected virtual drives?<br></html> VIRTUAL_DRIVES_TEXT1=<html>The preserved cache for the following offline virtual drives can<br>only be discarded by deleting the virtual drives.<br><br></html> UNABLE_CREATE_KEY=Unable to create key PR_NOT_START_PD=Patrol Read cannot be started because there are no PD available PR_NOT_START_PD_CFG=Patrol Read cannot be started because there is no configuration available. MSG_LEARN_CYCLE1=You cannot start a learn cycle at this time because MSG_LEARN_CYCLE2=the battery pack is not connected to the controller MSG_LEARN_CYCLE3=the battery backup unit's voltage is low MSG_LEARN_CYCLE4=the battery backup unit is over temperature MSG_LEARN_CYCLE5=the battery backup unit is charging MSG_LEARN_CYCLE6=the battery backup unit is discharging MSG_LEARN_CYCLE7=a learn cycle has already been requested MSG_LEARN_CYCLE8=a learn cycle is already in progress MSG_LEARN_CYCLE9=there was a failure MSG_LEARN_CYCLE10=the learn cycle timed out MSG_LEARN_CYCLE11=an I2C error was detected MSG_INITTYPE_TEXT=Initialization Type : INFO=Information WARN=Warning CRTL=Critical FATAL=Fatal DEAD=Dead LABEL_DRIVE_GROUP=Drive Group: DEFWRITE_POLICY_DSC=Default Write Policy MSG_REPLACE_BY1=.\n\nThis may take some time. Go to the show\nprogress option to view the progress of this\nreplacement or abort the operation. MSG_REPLACE_PHYSICAL_DISK_INFO_TITLE=Replace Physical Drive RWC2_BANNER_IMAGE=banner35.png MSG_DSC=Message IP_ADDR_DSC=Local Host IP address TITLE_DISCARD_PINNED_CACHE=Confirm Discard Preserved Cache CONFIRM_TEXT_WITH_MNEMONIC=(C)onfirm TITLE_OFFLINE_VIRTUAL_DRIVES=Offline Virtual Drives. VIRTUAL_DRIVES_LABEL=Offline virtual drives: DISCARD_PRESERVED_CACHE_BUTTON_TEXT=Discard Cache BUTTON_CLOSE_TEXT_WITH_MNEMONIC=Close VIRTUAL_DRIVES_LABEL=Virtual drives with preserved cache: TITLE_MANAGE_PRESERVED_CACHE=Manage Preserved Cache PRESERVED_CACHE_RETAINED_TITLE=Preserved Cache Retained LDRIVE_MISSING=Missing LDRIVE_STATE_MISSING=Missing TITLE_PRESERVED_CACHE=Cannot Perform with Preserved Cache SUGGESTED_PASS_PHRASE_DIALOG_TITLE=Suggested Password LABEL_SUGGESTED_PASS_PHRASE=(S)uggested Password: ADAPTER_OPERATION_14=Manage Preserved Cac(h)e CC_SCHEDULE_SET_CONFIRM_MSG=Consistency check is scheduled at PROPERTY_NCQSTATUS_TEXT=Native Command Queuing PROPERTY_NCQ_ENABLED=Enabled PROPERTY_NCQ_DISABLED=Disabled PROPERTY_SMART_CB=SMART Copyback #LABEL_DRIVE_GROUP=Drive Group: PROPERTY_TOTAL_CAPACITY=Total Capacity PROPERTY_FREE_CAPACITY=Free Capacity PROP_ENCRYPTION_TYPE_CTRL_BASED=Controller-based encryption PROP_ENCRYPTION_TYPE_FDE_BASED=Full disk encryption BBU_NEXTLEARN_CYCLE=Next Learn Cycle AUTO_LEARN_DISABLED=Disabled MSG_DELETELD_CONFIRM_TITLE=Confirm Delete Virtual Disk PD_STATE_HOTSPARE_UNUSABLE=Unusable PD_STATE_SYSTEM=JBOD OPERATION_COPYBACK_REPLACING_TEXT=replacing OPERATION_COPYBACK_REPLACED_TEXT=being replaced with AUTO_VD_NAME=Auto VD USE_ALLARRAYS_DSC=Use Existing and New drive groups MSG_GUIDED_VD=Guided VD MSG_NO_FOREIGN_IMPORT_TITLE=No Configurations To Import TITLE_FOREIGN_CONFIG_DETECTED=Foreign Configuration Detected LABEL_CHOOSE_AN_OPTION=Choose an option: FOREIGN_CFG_LABEL_WARNINGS=(W)arnings MSG_INCOMPLETE_FOREIGN_CFG_WARN=Incomplete Foreign Config, Please see the warnings ! TEXT_CONFIGURATION=Configuration OUT_OF= out of FAILED_TO_IMPORT= configurations failed to import. LABEL_TABLE_COLUMN_DRIVE=Drive LABEL_TABLE_COLUMN_KEYID=Security Key Identifier MSG_LABEL_PREVIEW=(P)review 80886_WITH=Replacing with ADAPTER_TYPE_ISCSI_UNKNOWN=Unknown MSG_MAX_LEARN_DELAY_EXCEEDED1=Learn Delay Interval must not be greater than 7 Days ! CANNOT_IMPORT_LOCKED_DRIVES_DESC1=Cannot Import Locked Drives TITLE_CANNOT_IMPORT_LOCKED_DRIVES1=Drive Security Required to Import DRIVE_SECURITY_NEEDED_TO_IMPORT_DESC1=strSecurityNeeded CONSISTENCY_SETTING=Consistency Check Settings PROP_GENERAL=<html><b>General:</b></html> PROP_FWPROP=<html><b>Firmware Properties:</b></html> PROP_DSPROP=<html><b>Drive Security Properties:</b></html> PROP_BOPROP=<html><b>Background Operation Properties:</b></html> PROP_IOC=<html><b>IO and Cache Policies</b></html> PROP_WPOLICY=<html><b>Write Policy</b></html> PROP_ECLPROP=<html><b>Enclosure Properties</b></html> PROP_COMPPROP=<html><b>Component Properties</b></html> #end ADAPTER_OPERATION_SSD_GUARD_ENABLE=Enable SSD (G)uard ADAPTER_OPERATION_DESC_SSD_GUARD_ENABLE=This will enable the SSD Guard capability. ADAPTER_OPERATION_SSD_GUARD_DISABLE=Disable SSD (G)uard ADAPTER_OPERATION_DESC_SSD_GUARD_DISABLE=This will disable the SSD Guard capability. PROPERTY_SSD_GUARD=SSD Guard PROPERTY_SSD_GUARD_ENABLED=Enabled PROPERTY_SSD_GUARD_DISABLED=Disabled PROPERTY_MEMUMEMORYNCORRECTABLEERRORCOUNT_TEXT = Memory uncorrectable count #PATROL READ PR_MODE_SELECT = Select Patrol Read (m)ode: PR_MAX_PD_LABEL = Ma(x)imum number of Physical drives allowed for Patrol Read concurrently: PR_VD_PD_DESC = Include the Virtual drives for whose physical drives, Patrol Read should be performed: PR_AVAILABLE = Availa(b)le Virtual drives: PR_INCLUDED = I(n)cluded Virtual drives: PR_ADD = (A)dd > PR_ADD_ALL = A(d)d All >> PR_REMOVE = (R)emove < PR_REMOVE_ALL = Remo(v)e All << PR_INTERVAL = Patrol Read Interval PR_INTERVAL_LABEL = Selec(t): PR_SCHEDULE = Patrol Read Schedule PR_START = (P)erform Patrol Read when I press OK. PR_START_TIME = Start Patrol Read on: PR_NAME_MENU = (P)atrol Read PR_START_MENU = Start (P)atrol Read PR_STOP_MENU = Stop (P)atrol Read PR_ENABLE_MENU = (E)nable Patrol Read PR_DISABLE_MENU = Disabl(e) Patrol Read PR_SET_PROPERTIES = Se(t) Patrol Read Properties PR_ADD_VD = <html>The selected virtual drive(s) are part of one or more physical drives.<br>Adding the virtual drive will add\ the corresponding virtual drives for<br>Patrol Read.<br><br>Are you sure you want to add ?</html> PR_REMOVE_VD = <html>The selected virtual drive(s) are part of one or more physical drives.<br>Removing the virtual drive \will remove the corresponding virtual drives.<br><br>Are you sure you want to remove ?</html> PR_MONTH = M(o)nth: PR_DAY = Dat(e): PR_YEAR = (Y)ear: PR_TIME = T(i)me: PR_NON_STOP = R(u)n Patrol Read non-stop. PR_CLOSE = Do you want to close the wizard ? PR_SAVE = Patrol Read properties have been saved. PR_SAVE_START = Patrol Read properties have been saved and started. PR_CONFIRMATION_TITLE = Patrol Read - Confirmation PR_SAVE_START_TITLE = Patrol Read properties saved and started PR_SAVE_TITLE = Patrol Read properties saved PATROL_READ_TITLE = Patrol Read - Information PR_DISABLED_TITLE = Patrol Read - Disabled PR_DISABLED = Patrol Read is disabled. PR_NO_PD_TITLE = Patrol Read - No PD PR_NO_PD = Patrol Read cannot be started because there are no PD available. PR_NO_CONFIG_TITLE = Patrol Read - No Configuration PR_NO_CONFIG = Patrol Read cannot be started because there is no configuration available. PR_BACKGROUND_PROCESS_TITLE = Patrol Read - Background process running #CASPIAN-2 CR's LDRIVE_OPERATION_CAPACITY_EXP = E(x)pand Virtual Disk Capacity LDRIVE_OPERATION_CAPACITY_EXP_DESC = Expands the capacity of the Virtual Disk. MSG_VOLUME_EXPANSION_WARNING = <html>It is advisable to backup the data before you proceed. <br>This operation cannot be stopped once started. <br><br>Do you want to continue?</html> OPERATION_OCE_TEXT = Capacity Expansion. MSG_RAID1E_WARNING = The virtual dirve cannot be migrated to MegaRAID controller. Do you want to continue? PROPERTY_IMPORTABLE_TEXT = Importable PROPERTY_CERTIFIED_TEXT = Certified FOREIGN_DRIVE_NOT_IMPORTABLE_IMAGE = foreign_drive_non_importable.png PROPERTY_PD_TEMPERATURE=Temperature PROPERTY_DEVICESPEED_TEXT=Drive Speed PROPERTY_LINKSPEED_TEXT=Negotiated Link Speed LDRIVE_OPERATION_9=Clear (B)ad Blocks LDRIVE_OPERATION_9_DESC=Remove bad blocks that exist on the drives composing the disk group and virtual disk. Click go to clear bad blocks. PROPERTY_BAD_BLOCKS_EXIST_METHOD_TEXT=Bad Blocks MSG_CLEAR_BAD_BLOCK_WARNING=<html>This operation will be destructive to data.Make sure the<br>bad blocks do not affect data before you clear them.\ <br><br>Are you sure you want to clear bad blocks?</html> MSG_PDMISSING_CONFIRM=Warning: This will mark the Physical Drive as Missing! Are you sure? RAID_LEVEL_1_DISPLAY_STRING=RAID 1 #VenusII-MenuRedesign #start STARTINIT=S(t)art Init STOPINIT =S(t)op Init MENU_CONTROLLER=(C)ontroller MENU_DRIVEGROUP=(D)rive Group MENU_PHYSICALDRIVE=(P)hysical Drive MENU_VIRTUALDRIVE=(V)irtual Drive MENU_BBU=(B)BU #Controller MENU_ENBLPR=Enabl(e) Patrol Read MENU_ENBLPR_DESCR=Enable Patrol Read operation on the selected physical drives MENU_DSBLPR=Disabl(e) Patrol Read MENU_DSBLPR_DESCR=Disable Patrol Read operation on the selected physical drives MENU_STRTCC=Start Consistenc(y) Check MENU_STPCC=Stop Consistenc(y) Check ENABLESMART=Enable S.(M).A.R.T ENABLESMART_TEXT=Enable S.M.A.R.T DISABLESMART=Disable S.(M).A.R.T DISABLESMART_TEXT=Disable S.M.A.R.T ENABLESMART_DESCR=Enable S.M.A.R.T Operation DISABLESMART_DESCR=Disable S.M.A.R.T Operation MENU_VERIFY_SECURITY=Verify Security Setti(n)g MENU_SHOW_PROGRESS=Sh(o)w Progress MENU_LOAD_BIOS=Load (B)IOS #Virtual Disk MENU_RENAME_VD=(R)ename Virtual Drive MENU_EXPAND_VD=E(x)pand Virtual Drive Capacity MENU_SNAPSHOT_ENBL=Enable (S)napshots MENU_SNAPSHOT_DSBL=Disable (S)napshots TEXT_RENAME_VD=Rename Virtual Drive MSG_IMPORT_FOREIGNCFG_FAILED_MAXVD=Cannot import the remaining foreign configuration. \n Because, the number of Logical Drives supported by \n Controller has been exceeded! #End MSG_MEMFREE_FAILED=Failed to free memory PROPERTY_ISUARTPRESENT_TEXT=UART Present MANUAL_MODE_ARRAY=(A)rray Selection MANUAL_MODE_ARRAY_1=Array Selection AUTHENTICATE_DIALOG_TITLE=Enter User Name & Password RECONWIZARD_TEXT=Reconstruction Wizard IOPOLICY_CACHED=Cached IO LEGEND_UNUSED_TEXT=Available CONFIGWIZARD_TEXT=Configuration Wizard PROPERTY_DEVID_TEXT=Device ID PROPERTY_PSUPPLYNUMBER_TEXT=Number of Power Supplies #MENU_LOGVIEW_TEXT=(V)iew Saved Log LEGEND_USED_TEXT=Configured LABEL_BGIRATE_TEXT=(B)GI Rate WRITEPOLICY_WRITE_BACK= Write Back WRITEPOLICY_ALWAYS_WRITE_BACK = Always Write Back WRITEPOLICY_WRITE_BACK_WITH_BBU=Write Back with BBU BBU_MFG_DATE=Mfg Date OPERATION_INSTRUCTION_TEXT=<html>Select an operation from the left and press go to<br>invoke the selected Operation!</html> LABEL_EXISTINGARRAY_ONLY=Use (E)xisting Arrays Only LDRIVE_STATE_OFFLINE=Offline PROPERTY_VENDORINFO_TEXT=Vendor ID MSG_SET_CONTROLLER_PROP=Warning: This will set controller properties. MSG_ASSISTEDCONF_FAILED=Assisted Configuration Failed! PDTYPE_FC=Fibre Channel BBU_MAX_ERROR=Maximum Error Margin MSG_FAILED_FOREIGNCFG=Cannot read Foreign Config! PROPERTY_FWSTATE_TEXT=Firmware State RECON_DRIVE_SEL=Drive Selection ENCL_ELEMSTATUS_UNRECOVERABLE=Unrecoverable ENCL_ELEMSTATUS_NOT_INSTALLED=Not Installed PROPERTY_SUBVENDORID_TEXT=SubVendor ID MSG_NO_FOREIGN_CONFIG=NO Foreign Configuration is found! MSG_RECON_INPROGRESS=Operation cannot be started while reconstruction is in progress! MSG_STATUS_GUIDEDFINISH=Change the number, size and other parameters for Virtual Disks and press Next BBU_TYPE=Battery Type GUIDED_MSG_TEXT=The capacity mentioned will be used as an approximation while creating the virtual disks. MENU_LOG_TEXT=(L)og MSG_DELPDFROMARRAY_LDEXISTS=Cannot delete Physical Drive from the array because one or more Virtual Disk is defined on this array! PROPERTY_CACHEFLUSHINTERVAL_TEXT=Cache Flush Interval BUTTON_GUIDEDCONF_TEXT=(G)uided Configuration MSG_IGNORE_FOREIGN_CONFIG=Do you want to ignore the foreign configuration? MSG_NOARRAY_SELECTED=Please specify an array! BUTTON_IMPORT_CONFIG=Import Configuration LABEL_UNUSEDARRAYS_TEXT=Unused Arrays BUTTON_RECLAIM_TEXT=Reclai(m) RAID_LEVEL_5_DISPLAY_STRING=RAID 5 MSG_CLEAR_FOREIGN_CONFIG=This will clear the selected Foreign Configuration! Are you sure? MSG_CONFIG_FAILED=Cannot write configuration: Unknown Exception! PROPERTY_RAWSIZE_TEXT=Raw Size PD_STATE_OFFLINE=Offline MSG_DISBL_ALARM=Warning: This will start Patrol Read operation. MSG_INVALID_CTRL=Incorrect controller number specified MSG_CONF_EXISTS=Configuration exists. You must clear the existing configuration before adding a new one. MSG_SCSINAME_FAILED=Failed to get SCSI device name PD_STATE_FAILED=Failed LEGEND_HIGHLIGHTED_TEXT=Selected VD BBU_MFG_NAME=Mfg Name ADAPTER_OPERATION_8_DESC=User configurable task rate priorities for controller FAILED_SERVER=Failed MSG_GUIDEDCONFIG_FAILED=Guided Configuration failed! MANUAL_DRIVE_SELECTION_JTABLE_PORT_COLUMN_HEADING=Port MANUAL_MODE_FINISH=Fi(n)ish MANUAL_MODE_FINISH_1=Finish MSG_NOLD_SELECTED=Please specify a virtual disk! LABEL_CAPACITY_TEXT=Total (C)apacity: MSG_VERSION_MISMATCH=Mismatch in versions. BBU_OPERATION_REFRESH_DESC=Rescans and updates the BBU information RAID_LEVEL_3_DISPLAY_STRING=RAID 3 BBU_OPERATION_SLEEP=Sleep MSG_NOLD_TEXT=Please create at least one virtual disk and then proceed to next step! MSG_CONFIRM_ARRAYDELETE=This will delete the Array. Are you sure? MSG_STATUS_ARRAYSEL=Select one or more physical drive(s) and use the right arrow to move them to the right panel to create arrays MSG_FW_REBOOT=You must reboot the system to bring the firmware in effect ABOUT_OSVERSION_TEXT=Operating System Version DISK_CACHE_UNCHANGED=Unchanged PDTYPE_SATA=SATA PROPERTY_PDSTATE_TEXT=Physical Drive State MSG_INAVLID_PARAM=The input parameter to the command was invalid LOGICAL_TAB_TEXT=Logical BUTTON_UPDATE_TEXT=(U)pdate MAXPD_COUNT_TEXT=Ma(x)imum PD Count for patrolling: COER_MODE_128MB=128 MB PROPERTY_ISBBUPRESENT_TEXT=BBU Present MSG_STATUS_GUIDED=Select the choices given above and then proceed to next step for guided configuration LOG_DETAILS_DIALOG=Event Details PHDRIVE_OPERATION_1_DESC=Changes a drive from OFFLINE state to ONLINE state PROPERTY_YES_TEXT=Yes PROPERTY_DEFWRITEPOLICY_TEXT=Default Write Policy MSG_RECON_CHGRL=This operation cannot be aborted. Do you want to continue? LABEL_LDNUM_HINT=(D)esired Number of Virtual Disks : MSG_LINUX_LIBSYSFS_MISSING=libsysfs is not present in the system RECON_INSERT_BUTTON_TEXT=(A)dd Drive LABEL_MB_TEXT=MB LABEL_REDUNDANCY_ONLY=(R)edundancy Only DEV_DIRECT_TEXT=Disk DIRECT_IO=Direct IO BBU_AVGTIMEFULL_CAPACITY=Average Time to Full MSG_INIT_FAILED=Storelib Initialization failed MSG_OP_TIMEDOUT=Command to driver timed out PRPOERTY_HOSTINTERFACE_TEXT=Host Interface PROPERTY_DEVICEPORTCOUNT_TEXT=Device Port Count PD_CACHE_ENABLE=Enable PROPERTY_RECONRATE_TEXT=Reconstruction Rate MSG_SELECT_ARRAY=Please select one or more arrays! MAX_DRIVE_SELECTION_EXCEEDED_TEXT=You have exceeded maximum number of drive selection RECONSTRUCTION_CARD_TITLE= You have exceeded maximum number of drive selection LABEL_REDUNDANCY_NO=N(o) Redundancy MSG_LOGIN_EXFAILURE=Login failed: Exception while login! LEGEND_LDRIVELOCATION_TEXT=Virtual Disk Location MSG_NOSTOARGEAPI=No Storage Controller Found! PROPERTY_TEMPERATURE_TEXT=Temperature LABEL_ELAPSED_TEXT=Elapsed time: PD_STATE_REBUILD=Rebuild READ_AHEAD_NONE=No Read Ahead LABEL_EXISTINGARRAYS_GROUP=Existing Arrays RECON_FINISH_SEL=Finish MSG_SETLDPARAM_FAILED=Cannot set virtual disk parameters! LABEL_USE_ALLARRAYS=Use Existing and New (A)rrays LABEL_ADD_HSP=-- Add Hotspare To -- MSG_ABORT_NOT_POSSIBLE=Abort not possible LABEL_VOLUMEPROP_TEXT=Virtual Disk Parameters SECOND_TEXT=second MENU_LOGSAVE_TEXT=(S)ave BUTTON_BROWSE_TEXT=(B)rowse PHDRIVE_OPERATION_10_DESC=Aborts Locate Physical Drive operation on a physical disk MSG_DEDICATEDHSP_FAILED=Cannot make dedicated hotspare: Error Code: LABEL_DEFWRITEPOLICY_TEXT=(W)rite Policy: LABEL_EVENT_TYPE=Event Type: MSG_SETLDPROP_CONFIRM=Warning: This will set Virtual Disk properties! Are you sure? MENU_CONFIG_TEXT=(C)onfiguration ADAPTER_TEXT=Controller ABOUT_OSNAME_TEXT=Operating System Name LABEL_HOSTNAME_TEXT=Host MSG_CONFIRM_LOGOVERWRITE=File already exists. Do you want to overwrite? MSG_INVALID_FILETYPE=This is not a valid FW File! LABEL_ACCESSPOLICY_TEXT=Access Pol(i)cy: MSG_CLEARCONFIG_FAILED=Clear Configuration failed: Unknown Exception PHDRIVE_OPERATION_2_DESC=Changes a drive from ONLINE state to OFFLINE state PDTYPE_UNKNOWN=Unknown GRP_SHOWPROGRESS_TITLE=Group Show Progress ENCL_ELEMSTATUS_NONCRITICAL=Non Critical MSG_PROTOCOL_ERROR=Fatal Error: Network protocol error! WRITEPOLICY_WRITE_THROUGH=Write Through PROPERTY_SLOTNUMBER_TEXT=Number of Slots PRODUCT_INFO=MegaRAID Storage Manager GRAPHICALVIEW_TAB_TEXT=Graphical View LABEL_TIME_STAMP=Time of Event: MSG_FLASHFW_CONFIRM=Warning: This will flash the controller firmware! Current firmware version is LABEL_INITIALIZATION_TEXT=Initiali(z)ation Type: PROPERTY_HOSTNAME_TEXT=Host Name PROPERTY_CLUSTERENABLE_TEXT=Cluster Enable SORTBYCOMBO_NAME_TEXT=Name MSG_LDPROGRESS_TEXT=Ongoing Operations on Virtual Disks NEWLDCREATED_TEXT=New Virtual Disk MENU_GRINITIALIZE_TEXT=(I)nitialize BBU_TEMP_STATUS=Temperature ENCL_ELEMSTATUS_UNKNOWN=Unknown UNPROTECTED_DRIVE_GROUPS=Unprotected Drive Groups UNPROTECTED_DRIVE_GROUPS_LABEL=(U)nprotected Drive Groups: UNPROTECTED_MSG=<html>This global hot spare will not protect the following<br>drive groups because it is a DRIVE=drive</html>. CACHED_IO=Cached IO LDRIVE_OPERATION_8=Set Virtual Drive (P)roperties LDRIVE_OPERATION_7=Abort Initiali(z)ation PD_STATE_HOTSPARE=Hot Spare LDRIVE_OPERATION_6=Start (I)nitialization LDRIVE_OPERATION_66=Stop (I)nitialization LABEL_REDUNDANCY_TEXT=(R)edundancy Type: LDRIVE_OPERATION_5=Cancel Check Consistency NEXT_LEARNTIME_TEXT=Next Learn Time (sec): LDRIVE_OPERATION_4=(C)heck Consistency BBU_AVGTIMEEMPTY_CAPACITY=Average Time to Empty MENU_CONFIGWIZARD_TEXT=Configuration (W)izard VOLUME_CANDIDATE_PANEL_ADD=Add BUTTON_CONNECT_TEXT=(C)onnect BUTTON_FINISH_TEXT=(F)inish LABEL_FWVERSION_TEXT=Framework Version: LD_ACCESS_RDONLY=Read Only PHDRIVE_OPERATION_11_DESC=Assigns the Unconfigured Good drive as a global hotspare BBU_GAS_GAUGE=Gas Gauge Status LABEL_POWER_TEXT=Power Supply MSG_LOGIN_FAILURE=Login failed: Invalid username or password! MSG_STATUS_IR_MANUALVDCREATE=<html>Select one Array from the top left panel, change the various properties and press accept DISK_CACHE_DISABLED=Disabled MSG_CONFIRM=Are you sure? MSG_STATUS_FINISH=View the summary and finally press Finish to write the configuration NOBBU_TEXT=No Battery BBU_OPERATION_SETPROP_DESC=Defines various Battery Operation Parameters BBU_OPERATION_LEARN_DESC=Starts a battery calibration cycle LABEL_STRIPESIZE_TEXT=Stri(p)e Size: PDTYPE_SAS=SAS RECON_REMOVE_BUTTON_TEXT=REMOVE LDRIVE_OPERATION_1_DESC=Deletes the specified virtual disk MSG_INIT_NOT_COMPLETED=Initialization was not yet completed. TEXT_CLIENT_TIME=Client time MSG_GET_PARTITION_FAILED=Failed to get partition. Partition may not exist PD_STATE_UNCONFGOOD=Unconfigured Good FOREIGN_CONFIG_WIZARD=Foreign Configuration Wizard MSG_LDOS_MAP_INCOMPLETE=The LD to OS drive mapping is not complete. This will happen when fw reports SELECTED_DRIVES_TEXT=(S)elected Drives PROPERTY_ACCESSPOLICY_TEXT=Access Policy PROPERTY_FLASHSIZE_TEXT=Flash Size PROPERTY_ISNVRAMPRESENT_TEXT=NVRAM Present BBU_FW_STATUS=Firmware Status LABEL_POWERS_TEXT=(P)ower Supplies PROPERTY_PREDFAILCOUNT_TEXT=Pred Fail Count PROPERTY_LDCOUNT_TEXT=Virtual Disk Count ADAPTER_TYPE_PCIX=PCIX AUTO_MODE_FINISH=Fi(n)ish AUTO_MODE_FINISH_1=Finish MSG_PDREBUILD_CONFIRM=Warning: This will rebuild the Physical Drive! Are you sure? PROPERTY_LDDEGRADEDCOUNT_TEXT=Degraded Virtual Disk Count BBU_ABSCHARGE_STATE=Absolute State of Charge PROPERTY_LDRIVESIZE_TEXT=Size ADAPTER_TYPE_PCIE=PCIE MSG_INVALID_ARRAYSIZE=Please Create arrays with at least 2 physical drives then go to next step! LABEL_READPOLICY_TEXT=R(e)ad Policy: GUIDED_CONFIG_STEP3=Finish GUIDED_CONFIG_STEP3_1=Finish GUIDED_CONFIG_STEP2=V(i)rtual Disk Parameters GUIDED_CONFIG_STEP2_1=Virtual Disk Parameters BUTTON_ABORT_TEXT=Abort GUIDED_CONFIG_STEP1=G(u)ided Config GUIDED_CONFIG_STEP1_1=Guided Config MSG_AUTOCONFIG_FAILED=Auto Configuration failed! RECON_DELETE_BUTTON_TEXT=(R)emove Drive MSG_ABORTPROG_CONFIRM=Do you want to abort this operation? BBU_OPERATION_REFRESH=Refresh PROPERTY_FWBUILDTIME_TEXT=Firmware Build Time BBU_DESIGN_CAPACITY=Design Capacity READ_AHEAD_ALWAYS=Always Read Ahead LABEL_FANS_TEXT=(F)ans SORTBYCOMBO_TYPE_TEXT=Type CONFIGURATION_NOTE=<html>Note: Drives containing boot partitions, foreign configurations or unsupported drives will not be \ listed because they can not be used in new configurations.</html> MSG_CANNOT_ABORT_OP=The operation cannot be aborted! PHDRIVE_OPERATION_12_DESC=Designates a ready or Unconfigured Good drive as a dedicated hotspare to the specified array(s) LABEL_NOREDUNDANCY_TEXT=No Redundancy MSG_PDOFFLINE_CONFIRM=Warning: This will make the Physical Drive Offline! Are you sure? MSG_PDONLINE_CONFIRM=Warning : Forcing a failed physical disk to Online will result in changing the virtual disk state. \ \nThis disk will immediately start participating in the virtual disk operations and may lead to data corruption. \ \n\nAre you sure you want to continue? RECON_NOCHANGE_BUTTON_TEXT=(C)hange RAID Level GRP_INITDLG_TITLE=Group Initialization BBU_TEXT=Battery Backup Unit LABEL_LDNAME_TEXT=(N)ame: STATUS_LOG_SERVER=Displaying log from server LDRIVE_OPERATION_2_DESC=Identifies virtual disk members by blinking the associated physical disk(s) activity LED PROPERTY_CURWRITEPOLICY_TEXT=Current Write Policy MSG_DELARRAY_ILLEGAL=Cannot delete new Array: Illegal Configuration Exception! LABEL_DOMAIN_ADDR=Connect to (r)emote server at IP address: MSG_INVALID_LDOPTION=cannot create Virtual Disk: Invalid input parameters for creating Virtual Disk! NEWLD_PROPERTY_INPUT=Virtual Disk Properties PROPERTY_ISCLUSTERACTIVE_TEXT=Cluster Active LOGGERHEADER_DESCRIPTION_TEXT=Description LABEL_OSNAME_TEXT=OS MENU_FILE_TEXT=(F)ile MENU_MANAGE_TEXT=(M)anage FULL_INIT_TEXT=Full Initialization TEXT_SEC_FRM_REBOOT=seconds from reboot PROPERTY_No_TEXT=No PROPERTY_HOSTPORTCOUNT_TEXT=Host Port Count BBU_TYPE_BBU=BBU WRITEPOLICY_WRITE_ADAPTIVE=Write Adaptive ABOUT_SERVERINFO_TEXT=(S)erver Info LABEL_SELECTLD_TEXT=Select Excluded Virtual Disks: PROPERTY_LDRIVERL_TEXT=Current RAID Level MSG_CONFIRM_ADDCFG=<html>This operation will try to configure the controller based on a saved configuration.<br>Unstable conditions might arise due to difference in physical devices in the two configurations.<br>Are you sure ?</html> ABOUT_HOSTNAME_TEXT=HostName MENU_LOGCLEAR_TEXT=(C)lear HEALTHY_SERVER=Healthy ACCESS_READ_WRITE=Read Write PHDRIVE_OPERATION_13_DESC=Removes the hotspare assignment and changes the drive state to UNCONFIGURED GOOD ADAPTER_OPERATION_1_DESC=Sets controller alarm to on to alert user when the controller MENU_HELP_TEXT=(H)elp PROPERTY_REVLEVEL_TEXT=Revision Level PD_CACHE_DISABLE=Disable BUTTON_AUTOCONF_TEXT=(A)uto Configuration SERVERINFO_LABEL_TEXT=Server Information LABEL_REDUNDANCY_GROUP=Redundancy PROPERTY_HOSTOSARCH_TEXT=OS Architecture LDRIVE_STATE_PARTDERGRADED=Partially Degraded MSG_GETRDLEVELSIZE_FAILED=Cannot get possible RAID level and size: Unknown Exception! MINUTE_TEXT=minute LABEL_LDSUMMARY_TEXT=(V)irtual Disk Summary MENU_OPERATION_TEXT=(G)o To ACCEPT_ARRAY=A(c)cept MSG_DELETELD_CONFIRM=Warning: This will delete the Virtual Disk! Are you sure? LABLE_KERNELVERSION_TEXT=Kernel Version: PD_STATE_UNCONFBAD=Unconfigured Bad LDRIVE_OPERATION_3_DESC=Aborts the Locate Virtual Disk operation PROPERTY_COERCEDSIZE_TEXT=Coerced Size PHDRIVE_OPERATION_5_DESC=Replaces a drive of a degraded array that is marked missing with an UNCONFIGURED GOOD drive PROPERTY_REBUILDRATE_TEXT=Rebuild Rate PROPERTY_HOSTOSVER_TEXT=OS Version MSG_FATAL_RESCAN_ERROR=Fatal error: rescan failed! Exiting... PROPERTY_DEVICEPORTADDRESS_TEXT=Device Port Address DEGRADED_SERVER=Degraded ENCLOSURE_TEXT=Enclosure PROPERTY_FWVERSION_TEXT=Firmware Version LABEL_NUMVIRTUALDISK_TEXT=(V)irtual Disk Count: MSG_CONFIRM_LOGSAVE_BEFORE_DELETE=Do you want to save the existing log? OPERATION_RECON_TEXT=Reconstruction FREQUENCY_TEXT=Execution Fre(q)uency: LABEL_ESTIMATED_TEXT=Estimated time left: LABEL_ARRAY_FREE=Arrays with Available Space MSG_NOCONFIG_POSSIBLE=No new Virtual Disk can be added to the configuration! LABEL_WITHREDUNDANCY_TEXT=With Redundancy PROPERTY_MEMUNCORRECTABLEERRORCOUNT_TEXT=UnCorrectable Error Count MSG_INVALID_DATA=Invalid data sent to driver MSG_INVALID_OPSTATE=The drive is not in a state to perform LD_ACCESS_BLOCKED=Blocked GUIDED_CONFIG_STEP=Finish MSG_INVALID_IPADDR=Invalid IP Address! AUTOLEARN_PERIOD_TEXT=Auto Learn Period (sec): MENU_RECONWIZARD_TEXT=(R)econstruction Wizard COER_MODE_1GB=1 GB MSG_FULLACCESS_DENIED=<html>Full Access denied because another user is logged in<br> with full access from IP Address: MSG_UNKNOWN_ERROR=Operation Failed OPMODE_MANUAL=Manual PROPERTY_ALARMENABLE_TEXT=Alarm Enabled BBU_NEXTLEARN_TIME=Next Learn Time PHDRIVE_TEXT=Physical Drive MSG_DATA_BAKUP=It is advisable to backup data before this operation. Are you ready? ABOUT_OKBUTTON_TEXT=OK PROPERTY_SASADDR_TEXT=Backend SAS Address PROPERTY_ISALARMPRESENT_TEXT=Alarm Present LOGINMODE_TEXT=Login (M)ode: ADAPTER_OPERATION_2_DESC=Sets the audible controller alarm option to off PROPERTY_BIOSVERSION_TEXT=BIOS Version MSG_CONFIRM_LOGDELETE=This will delete the log. Are you sure? BUTTON_ADDHSP_TEXT=Add HotSpare CHECKBOX_WITHFIX_TEXT=Automatically Fix errors LABEL_UNCONF_PDLIST=Unconfigured Physical Drive List LABEL_NO_EXISTINGARRAY=Do no(t) use Existing Arrays PROPERTY_WRITEPOLICY_TEXT=Write Policy MSG_REMOVEHSP_FAILED=Cannot remove hotspare! MSG_LD_ZERO=Total Number of Virtual Disks must be greater than 0! PROPERTY_TAB_TEXT=Properties MENU_ADVANCED_OP=(A)dvanced Operations MSG_CONN_LOST=Connection to the server has been lost. Do you want to re-login? LDRIVE_OPERATION_4_DESC=Starts a check consistency operation on the selected virtual disk PHDRIVE_OPERATION_6_DESC=Marks an offline/failed drive of a degraded array as missing in order to prepare for drive replacement OPERATION_MODE_TEXT=Operation (M)ode: MSG_DELPDFROMARRAY_FAILED=Cannot delete Physical Drive from the array! MSG_RAID0_NOTPOSSIBLE=This RAID level is not possible as there is dedicated hotspare for the specified arrays RAID_LEVEL_0_DISPLAY_STRING=RAID 0 MSG_ABORTALL_CONFIRM=This will abort all the operations shown above! Are you sure? MENU_EXIT_TEXT=E(x)it STATUS_LOG_LOCAL=Displaying log from file PROPERTY_MEMCORRECTABLEERRORCOUNT_TEXT=Correctable ErrorCount LABEL_CCRATE_TEXT=Ch(e)ck Consistency Rate PROPERTY_DEVICEID_TEXT=Device ID PROPERTY_SLOT_NUMBER=Slot Number OPERATION_BGI_TEXT=Background Initialize MANUAL_DRIVE_SELECTION_JTABLE_CAPACITY_COLUMN=Drive Capacity PROPERTY_PRODUCTINFO_TEXT=Product Info MENU_GRCHKCONSISTENCY_TEXT=(C)heck Consistency BGINIT_DISABLE=Disabled BUTTON_SELECTALL_TEXT=Select (A)ll MSG_FAIL_SAVE_CONFIG=Save configuration failed BUTTON_START=(S)tart LABEL_INITSTATE_TEXT=Init Stat(e): SERVER_TEXT=Server MSG_THREAD_CREATE_FAILED=Thread creation failed PROPERTY_HOSTSTATUS_TEXT=Status MSG_CMDFAILED_OS=Command failed by Operating System MENU_LOADPLUGINS_TEXT=Load Plugins MAX_DRIVE_SELECTION_TEXT=Select Physical Drives LOGGERHEADER_DATETIME_TEXT=Date / Time LABEL_RAIDLEVEL_TEXT=RAID (L)evel: OPERATION_PATROLREAD_TEXT=Patrol Read MSG_SELECTHOST=Please select a host from the list! MSG_LINUX_SYSFS_ERROR=An error occurred while accessing sysfs PROPERTY_DEVICETYPE_TEXT=Device Type PROPERTY_NO_TEXT=No PROPERTY_PRODUCTID_TEXT=Product ID SORTBYCOMBO_IPADDRESS_TEXT=IP Address PROPERTY_STRIPESIZE_TEXT=Stripe Size BBU_SERIALNO=Serial No ADAPTER_OPERATION_3_DESC=Temporarily quiets the controller alarm for the current event LABEL_SENSORS_TEXT=Sensors: MSG_ABOUT_LINE2=Copyright \u00a9 2007 LSI Corporation. All Rights Reserved. RECON_MODE_SEL=Reconstruction Mode MSG_ABOUT_LINE1=Client Build: LOGINMODE_FULLACCESS=Full Access PROP_PDSASADDR_TEXT=SAS Address LEGEND_UNUSABLE_TEXT=Reserved PD_CACHE_UNCHANGED=Unchanged VALUE_NOT_AVAILABLE=Not Available PHDRIVE_OPERATION_13=(R)emove Hot Spare PHDRIVE_OPERATION_12=Assign (D)edicated Hot Spare MSG_INIT_NOT_DONE=Storelib Initialization not completed PHDRIVE_OPERATION_11=Assign (G)lobal Hot Spare MSG_INVALID_CMD=Invalid Operation PHDRIVE_OPERATION_10=Stop (L)ocating Drive MSG_INVALID_FLASH_IMAGE=The firmware flash image is invalid MSG_RECON_NOTALLOWED=Reconstruction on this Volume is not allowed! BBU_FULL_CAPACITY=Full Capacity MSG_NO_CONNECTION=Fatal Error: Cannot connect to Framework! LDRIVE_OPERATION_5_DESC=Cancels the current check consistency operation on the selected virtual disk OPMODE_DISABLED=Disabled MSG_CONFIG_CORRUPTED=Configuration Corrupted! PHDRIVE_OPERATION_7_DESC=This option will start rebuild on selected offline/failed drive BUTTON_CLEAR_CONFIG=Cl(e)ar Configuration LOGGERHEADER_ERRORLEVEL_TEXT=Error Level PROPERTY_MEMORYSIZE_TEXT=Memory Size VOLUME_CANDIDATE_PANEL_REMOVE=Remove ACCESS_READ_ONLY=Read Only ADAPTER_TYPE_SAS_3G=SAS_3G PROPERTY_IOPOLICY_TEXT=IO Polic(y) PROPERTY_READPOLICY_TEXT=Read Policy MANUAL_DRIVE_SELECTION_JTABLE__DEVID_COLUMN=Device ID MSG_CLEAR_FOREIGN_FAILED=Clear Foreign Config failed! PROPERTY_DISKCACHEPOLICY_TEXT=Disk Cache Policy PROP_SCSIDEVTYPE_TEXT=SCSI Device Type WRITE_BACK =Always Write Back WRITE_BACK_WITH_BBU = Write Back with BBU RAID_LEVEL_TEXT=RAID PROPERTY_RAIDLEVEL_TEXT=RAID Level LABEL_STATE_TEXT=State: BBU_OPERATION_LEARN=Learn PROPERTY_COERCIONMODE_TEXT=Coercion Mode BBU_DESIGN_VOLTAGE=Design Voltage LDRIVE_STATE_DEGRADED=Degraded SORTBYCOMBO_OS_TEXT=OS RECON_ADD_BUTTON_TEXT=ADD NEWLD_TEXT=New Virtual Disks MSG_LINUX_SYSFS_NOTMOUNTED=sysfs is not mounted in the system COER_MODE_NONE=None LD_ACCESS_RDWRITE=Read Write ACCESS_BLOCKED=Blocked LABEL_FAN_TEXT=Fan MSG_NO_MORE_VD=16 Configurable Disks Limitation has been reached MSG_IMPORT_FOREIGNCFG_SUCCESS=Foreign Configuration was imported successfully! MSG_NOLD_POSSIBLE=Please Create at least one array then go to next step! PROPERTY_HOSTOS_TEXT=Operating System MSG_NOSERVER_FOUND=No Servers found! MENU_LOGREMOTE_TEXT=(R)ollback to Current Log PROPERTY_PATROLREADRATE_TEXT=Patrol Read Rate ADAPTER_OPERATION_4_DESC=Updates controller firmware with a specified firmware image BUTTON_ACCEPT_TEXT=Accep(t) MSG_NOASSISTED_POSSIBLE=No configuration possible for the given parameters! PROPERTY_CCRATE_TEXT=Consistency Check Rate LDRIVE_TEXT=Virtual Disk IOPOLICY_DIRECT=Direct IO RAID_TEXT=RAID TEXT_GUID=GUID MSG_SAVELOG_INVALIDFILE=Cannot save to the file specified! Device not ready! BUTTON_NEXT_TEXT=(N)ext OPERATION_FGI_TEXT=Foreground Initialize OPMODE_AUTO=Auto BUTTON_DESELECTALL_TEXT=(D)eselect All STATUS_LOG_FILE_ERROR=No Valid Log found in LDRIVE_OPERATION_6_DESC=Starts an initialization operation on the selected virtual disk MSG_ILLEGAL_CONFIG=Cannot create new Array: Illegal Configuration Exception! PHDRIVE_OPERATION_8_DESC=Cancels the current rebuild operation on a physical drive PROPERTY_PDTYPE_TEXT=Physical Drive Type MSG_MAXLDNUM_EXCEEDED=Total number of Virtual Disks must not exceed MSG_SELCCLDRIVE_TEXT=Select Virtual Disks: OPERATION_REBUILD_TEXT=Rebuild NEW_ARRAY_TEXT=New Array OPERATIONS_TAB_TEXT=Operations PROPERTY_VENDORID_TEXT=Vendor ID MSG_CONFIG_NOTALLOWED=Configuration on this adapter is not allowed! ABOUT_OSARCHI_TEXT=Operating System Architecture MSG_UNKNOWN=Unknown Exception! GRP_CONCHECK_TITLE=Group Consistency Check LABEL_RAID_TEXT=RAID BBU_RUNTIMEEMPTY_CAPACITY=Run time to Empty MSG_STATUS_MANUALVDCREATE=<html>Check one or more Array holes from the top left panel, change the various properties and press accept MSG_INVALID_INPUT=Invalid input specified! BUTTON_MODIFY_TEXT=(M)odify PASSWORD_TEXT=(P)assword: SERVERS_BUTTON_TEXT=(S)erver LABEL_PATROLREADRATE_TEXT=Patrol (R)ate ABOUT_IPADDRESS_TEXT=IP Address READ_AHEAD_ADAPTIVE=Adaptive Read Ahead BBU_OPERATION_SLEEP_DESC=Sets the BBU to low power storage mode BBU_REM_CAPACITY=Remaining Capacity ARRAY_WITH_HOLES=Arrays with Free Space PROPERTY_BIOSBUILDTIME_TEXT=BIOS Build Time MODE_SEL_STEP=Mode (S)election MODE_SEL_STEP_1=Mode Selection MSG_IMPORT_FOREIGNCFG_FAILED=Import foreign configuration failed! LABEL_REDUNDANCY_TRY=Redundancy when (p)ossible ADAPTER_OPERATION_5_DESC=Sets Patrol Read options for configured physical drives BBU_VOLTAGE_STATUS=Voltage BUTTON_OPERATION_GO=G(o) MSG_NOT_RESPONDING=Framework not responding! MENU_GRPROGRESS_TEXT=Sh(o)w Progress MENU_FOREIGN_CONFIG=Scan (F)oreign Configuration MSG_CANNOT_ABORT=Cannot be aborted! MSG_MEMALOC_FAILED=Failed to allocate memory WRITE_THROUGH=Write Through DISK_CACHE_ENABLED=Enabled LABEL_TEMPERATURE_TEXT=Temperature MSG_MAXEVENT_EXCEEDED=The maximum number of events that can be retrieved has exceeded BBU_OPERATION_SETPROP=Set BBU Properties LDRIVE_OPERATION_7_DESC=Cancels the current initialization operation on the selected virtual disk PHDRIVE_OPERATION_9_DESC=Identifies a physical disk by blinking the associated physical disk activity LED BUTTON_CANCEL_TEXT=Cancel MSG_MAXCONFIG_EXCEEDED=Max Configuration limit exceeded! ADAPTER_TYPE_ISCSI=Unknown MENU_RESCAN_TEXT=(R)efresh BUTTON_MANUALCONF_TEXT=(M)anual Configuration LABEL_SENSOR_TEXT=Sensor TEXT_ARRAY_ROW=Row Index MENU_PLUGINS_TEXT=Plugins BUTTON_ABORTALL_TEXT=Abort All[A] ENCL_ELEMSTATUS_OK=OK BUTTON_LOGIN_TEXT=(L)ogin USERNAME_TEXT=(U)ser Name: HOLE_TEXT=Hole MSG_BIG_LDNAME=Virtual Disk Name is too big! MENU_GROUPOPERATION_TEXT=(G)roup Operations BUTTON_CLOSE_TEXT=Close[C] PROPERTY_SERIALNO_TEXT=Serial No LOGINMODE_VIEWONLY=View Only PROPERTY_LDSTATE_TEXT=Virtual Disk State PROPERTY_MEDIACOUNT_TEXT=Media Error Count PROPERTY_DISKWRITECACHEDISABLE_TEXT=Disk Write Cache Disable LDRIVE_STATE_OPTIMAL=Optimal MSG_LDDELETE_DATA_LOST=Data contained in the virtual drive will be lost. Do you want to continue? DEV_TAPE_TEXT=TAPE PDTYPE_SCSI=SCSI MSG_ADDHOTSPARE_FAILURE=Cannot add Hotspare to the array! LABEL_BACKGROUNDINIT_TEXT=Background Ini(t)ialization: CHECKBOX_FASTINIT_TEXT=Fast Initiali(z)ation PROPERTY_BGIRATE_TEXT=BGI Rate MSG_CONFIRM_CFGOVERWRITE=This will overwrite the existing configuration. Are you sure? MANUAL_MODE_LOGICALDRIVE=V(i)rtual Disk Creation MANUAL_MODE_LOGICALDRIVE_1=Virtual Disk Creation BUTTON_REMOVEHSP_TEXT=Remove HotSpa(r)e PROPERTY_HOSTPORTADDRESS_TEXT=Host Port Address #MENU_HELPME_TEXT=(H)elp UNUSED_ARRAYS_TEXT=Unused Arrays LABEL_PATROL_CONTINUOUS=(C)ontinuous Patrolling BBU_CURRENT_STATUS=Current SELECT_RAID_LEVEL_TEXT=New (R)AID Level BBU_RELCHARGE_STATE=Relative State of Charge PROPERTY_LDFAILEDCOUNT_TEXT=Failed Virtual Disk Count MSG_NO_OP_SELCTED=Please select an operation ! ADAPTER_OPERATION_6_DESC=Starts Patrol Read operation on the selected physical drives LABEL_VOLUMENAME_TEXT=Volume (N)ame : ARRAY_TEXT=Array MSG_LDINIT_DATA_LOST=Initialization will result in data loss on the selected Virtual Disk(s). Proceed ? PROPERTY_LDRIVENAME_TEXT=Name MSG_FAIL_ADD_CONFIG=Add configuration failed #MENU_ABOUT_TEXT=(A)bout MSG_NOMORE_ARRAY=No more array can be created : Maximum Number is : OPERATION_CLEAR_TEXT=Clear ENCL_ELEMSTATUS_NOT_AVAILABLE=Not Available OPERATION_CC_TEXT=Check Consistency LDRIVE_OPERATION_8_DESC=Defines virtual disk operation parameters PROPERTY_FANNUMBER_TEXT=Number of Fans ADAPTER_OPERATION_8=Set Ad(j)ustable Task Rates PROPERTY_HOSTIP_TEXT=IP Address ADAPTER_OPERATION_7=Stop (P)atrol Read PORT_TEXT=Port ADAPTER_OPERATION_6=Start (P)atrol Read MSG_DELARRAY_FAILED=Cannot delete new Array: Unknown Exception! ADAPTER_OPERATION_5=Set Patrol (R)ead Properties ADAPTER_OPERATION_4=Update C(o)ntroller Firmware ADAPTER_OPERATION_3=(S)ilence Alarm VERSIONINFO_LABEL_TEXT=Version Information ADAPTER_OPERATION_2=Disable (A)larm MSG_STATUS_MODESEL=Select one of the modes of configuration ADAPTER_OPERATION_1=Enable (A)larm ENCL_ELEMSTATUS_CRITICAL=Critical MSG_PDPROGRESS_TEXT=Ongoing Operations on Physical Drives PHYSICAL_TAB_TEXT=Physical MSG_ARRAYCREATIONIR_FAILED=Cannot create new Array: At least 2 physical drives needed! PROPERTY_NVRAMSIZE_TEXT=NVRAM Size MSG_MAXPDINARRAY_EXCEEDED=No more Physical Drive can be added to this array: Maximum Number is: LABEL_DISKCACHEPOLICY_TEXT=Dis(k) Cache Policy: PROPERTY_PRODUCTNAME_TEXT=Product Name HOUR_TEXT=hour LABEL_SORTBY_TEXT=(S)ort By AVAILABLE_DRIVES_TEXT=(A)vailable Drives LABEL_IPADDRESS_TEXT=IP Address LABEL_SIZE_TEXT=Si(z)e: SELARRAY_DEDICATEDHSP_TEXT=Select arrays LABEL_RECONRATE_TEXT=Reconstru(c)tion Rate BBU_CYCLE_COUNT=Cycle Count BUTTON_BACK_TEXT=(B)ack IBBU_TEXT=IBBU DEV_CDROM_TEXT=CDROM DEV_OPTICAL_DRIVE_TEXT=Optical Drive MSG_DEVNOT_RESPONDING=Device not responding! HOTSPARE_TEXT=HotSpare Physical Drive MSG_STATUS_AUTOCONFIG=Select modify to make desired changes to auto configuration parameters or Select Finish to complete Auto Configuration Wizard. MSG_LINUX_SCSIMAP_FAILED=The SCSI device to SCSI address mapping failed BBU_AUTOLEARN_PERIOD=Auto Learn Period MSG_DELETLD_FAILED=Cannot delete newly created Virtual Disk: Unknown Exception! MSG_PDREMOVEHSP_CONFIRM=Warning: This will remove the hotspare drive! Are you sure? MSG_MUTEX_CREATE_FAILED=Mutex creation failed MSG_NOADMIN_RIGHT=This user does not have Administrator right for this system! PD_STATE_ONLINE=Online LABEL_VOLUMEID_TEXT=Volume I(D): LABEL_REBUILDRATE_TEXT=Reb(u)ild Rate PROPERTY_LDONLINECOUNT_TEXT=Online Virtual Disk Count PHDRIVE_OPERATION_9=St(a)rt Locating Drive PHDRIVE_OPERATION_8=Stop Re(b)uild PHDRIVE_OPERATION_7=Start Re(b)uild PHDRIVE_OPERATION_6=(M)ark Drive as Missing COMBO_SELECTLDRIVE_TEXT=-- Select Virtual Disk (VD) -- PHDRIVE_OPERATION_5=Re(p)lace Missing Drive PHDRIVE_OPERATION_4=Stop (P)atrol Read PHDRIVE_OPERATION_3=Start (P)atrol Read PHDRIVE_OPERATION_2=Make Drive (O)ffline PHDRIVE_OPERATION_1=Make Drive (O)nline PHDRIVE_OPERATION_16=Disable (W)rite Cache PHDRIVE_OPERATION_17=Enable (W)rite Cache ADAPTER_OPERATION_7_DESC=Stops the current Patrol Read operation MSG_NOMORE_ARRAY_INONESHOT=No additional arrays may be created in this configuration. LABEL_FILETYPE_ROM=ROM Files (*.rom) POSTPONELEARN_DELAY_TEXT=Postpone Learn Delay Interval (hours): MSG_CONFIG_OS_DRIVE_PRESENT=This configuration contains at least one OS drive. Configuration cannot be cleared. MSG_OS_LD=This is an OS drive. This virtual drive cannot be deleted. PROPERTY_ENCLOSURE_TYPE_TEXT=Enclosure Type PROPERTY_ENCLOSURE_TYPE_VIRTUAL=Virtual MSG_NEW_VERSION=and the new version is MENU_ADD_CONFIG=(L)oad Configuration MENU_SAVE_CONFIG=Save Conf(i)guration MENU_CLEAR_CONFIG=(C)lear Configuration OPERATION_SELECTION_TEXT=Selected Operation : OPERATION_DESC_TEXT=Description : LDRIVE_OPERATION_1=(D)elete Virtual Drive LDRIVE_OPERATION_2=Start (L)ocating Virtual Drive LDRIVE_OPERATION_3=Stop (L)ocating Virtual Drive MSG_RECONS_ERR_UNKNOWN=Reconstruction failed : Unknown error MSG_PD_TYPE_WRONG=The operation cannot start because the type of drive you selected cannot be mixed with drives of another type. MSG_SAS_SATA_MIX_NOT_ALLOWED=Configuration is not possible with SAS/SATA mixed drives. Please select same types of drive to add into this array. TXT_DAYS= Days RECON_DRIVE_ADD_MESSAGE=<HTML>Select drive(s) that you want to add to the volume.<BR>You may select a maximum of {0,number} drive(s)</HTML> RECON_DRIVE_REMOVE_MESSAGE=<HTML>Select drive(s) that you want to remove from the volume.<BR>You may select a maximum of {0,number} drive(s)</HTML> MSG_CLEARCONFIG_CONFIRM=Clearing the configuration will destroy virtual disks and result in data loss on the selected controller. Proceed ? QUICK_INIT_TEXT=Fast Initialization NO_INIT_TEXT=No Initialization MSG_CONFIRM_LDRECLAIM=This will delete the newly created Virtual Disk! Are you sure? AUTOLEARN_MODE_TEXT=Auto Learn Mode: AUTO_LEARN_WARN=Warn AUTO_LEARN_MODE=Auto Learn Mode TXT_PROGRESS_HRS= Hrs TXT_PROGRESS_MIN= Min TXT_PROGRESS_SEC= Sec ZCR_LEGACY_TEXT=ZCR Legacy MSG_WRITE_BACK_WARN=Write-through is recommended for maximum data integrity when no battery is present ! MSG_COMPONENT_NOT_RUNNING_ERROR=Error : One or more target component is not running. MSG_CONFIGURATOR_NOT_RESPONDING_ERROR=Error : Configurator not responding. MSG_CONFIGURATOR_INVALID_OPERATION_ERROR=Error : Invalid operation. MSG_CONFIGURATOR_OPERATION_FAILED_ERROR=Error : Operation failed. MSG_CONFIGURATOR_EXCEPTION_ERROR=Error : Unknown exception. BUTTON_YES_TEXT=(Y)es BUTTON_NO_TEXT=(N)o CONFIRM_TEXT=(C)onfirm SPLASH_MSG_GUI_STARTING=Starting Vivaldi GUI... SPLASH_MSG_CONNECT_FRAMEWORK=Connecting Server SPLASH_MSG_WAIT=please wait... SPLASH_MSG_LOADING_PLUGIN=Loading SPLASH_MSG_ADAPTER_FOUND=Scanning Adapter... SPLASH_MSG_LOGIN_FULL_ACCESS_REQUEST=Logging in with 'Full Access' mode... SPLASH_SCREEN_LOGIN_VIEW_ONLY_REQUEST=Logging in with 'View Only' mode... SERVERIP_TEXT=Server : AUTOCONF_DESC_TEXT=Auto configuration is the quickest and simplest way to create a new storage configuration. Selecting this mode, the Configuration Wizard creates the best possible using the available physical disks with minimum user interactions. MANUALCONF_DESC_TEXT=Manual Configuration provides a fully flexible way create a new storage configuration. This is specially designed for advanced user with in-depth knowledge of storage configuration. Selecting this mode, the Configuration Wizard will let the user to create desired configuration with available disk drives. GUIDEDCONF_DESC_TEXT=Guided Configuration provides an easy way to create a new storage configuration. Based on the information that is provided during different steps, the Configuration Wizard uses the available disk drives to create an optimal storage configuration. BUTTON_SELECTPRIMARYDISK_TEXT=Change Primary Disk MSG_ERR_PRIMARY_DISK_CHANGE=Failed to change Primary Disk ! TITLE_SELECT_PRIMARY_DISK=Select Primary Disk MSG_SELECT_PRIMARY_DISK=Please select one disk as Primary Disk ! MENU_TOOLS_TEXT=(T)ools MENU_CONFIGURE_TEXT=(C)onfigure Alert Settings PROPERTY_FWPKGVERSION_TEXT=Firmware Package Version MSG_OS_LD_INIT=This is an OS drive. This virtual drive cannot be initialized. VD_WR_POLICY_BAD_BBU=(U)se Write Through for failed or missing battery ENCLOSURE_ID_TEXT=ID LOGGERHEADER_SEQUENCENO_TEXT=ID MSG_APP_DEGRADE=Incompatible Controller. Old firmware is being used. MSG_APP_UPGRADE=Application needs to be upgraded to support this controller. PROPERTY_MUXSETTING_TEXT=MUX Setting : Quad PROPERTY_MUXMODE_AUTO_TEXT=Auto PROPERTY_MUXMODE_EXT_TEXT=External PROPERTY_MUXMODE_INT_TEXT=Internal MSG_WARNING_DIALOG=Do you want to close the window ? RECON_CHANGE_RAID_TEXT=Change RAID Level provides a way to reconstruct the existing storage configuration. No drive additions or deletions are required from the existing configuration. This has been done by changing the RAID Level only. RECON_DELETE_TEXT=Remove drive provides a way to reconstruct the existing storage configuration. This has been by removing physical drives from the configuration. RECON_INSERT_TEXT=Add drive provides a way to reconstruct the existing storage configuration by adding new physical drives. PROPERTY_ENCLPOSITION_TEXT=Enclosure Position PROPERTY_ENCLCONNINDEX_TEXT=Enclosure Connector Index TITLE_SELECT_HOTSPARE_AFFINITY=Select affinity option MSG_SELECT_AFFINITY_OPTION=Please select affinity option ! MSG_NO_AFFINITY_OPTION=(N)o Affinity MSG_WITH_AFFINITY_OPTION=(W)ith Affinity BADBBU_PRE=Yes BADBBU_ABS=No PROPERTY_BADBBUPOLICY_TEXT=Write Through for failed/missing battery PD_STATE_HOTSPARE_DEDICATED=Dedicated PD_STATE_HOTSPARE_GLOBAL=Global PD_STATE_HOTSPARE_AFFINITY=Affinity MSG_MAX_LEARN_DELAY_EXCEEDED=Postpone Learn Delay Interval must not be greater than 7 Days ! WRITEPOLICY_WRITE_CACHE=Write Cache EXPANDER_TEXT=Expander RAID_LEVEL_6_DISPLAY_STRING=RAID 6 RAID_LEVEL_4_DISPLAY_STRING=RAID 4 LD_STRIPE_SIZE_512=512 Byte LD_STRIPE_SIZE_1K=1 KB LD_STRIPE_SIZE_2K=2 KB LD_STRIPE_SIZE_4K=4 KB LD_STRIPE_SIZE_8K=8 KB LD_STRIPE_SIZE_16K=16 KB LD_STRIPE_SIZE_32K=32 KB LD_STRIPE_SIZE_64K=64 KB LD_STRIPE_SIZE_128K=128 KB LD_STRIPE_SIZE_256K=256 KB LD_STRIPE_SIZE_512K=512 KB LD_STRIPE_SIZE_1M=1 MB LD_STRIPE_SIZE_2M=2 MB LD_STRIPE_SIZE_4M=4 MB MSG_RESOLUTION_NOT_SUPPORTED=System resolution not supported ! MSG_CLEAR_FOREIGN_CONFIG_SUCCESS=Foreign Configuration Cleared Successfully ! MSG_LDINIT_REFRSH_VD=VD list is not updated! Do you want to update? MSG_MAX_SELECTED_ARRAYS=Dedicated Hotspare can't be created for more than 16 arrays ! MSG_TXTLOGFILE_HEADER= Event Log - Generated on MSG_TXTFILE_ID=ID = MSG_TXTFILE_SEQNUM=SEQUENCE NUMBER = MSG_TXTFILE_TIME=TIME = MSG_TXTFILE_LOCALIZEDMSG=LOCALIZED MESSAGE = MENU_LOGSAVE_TEXT_FORMAT=Save as (T)ext MSG_EXECUTION_FRE_NOZERO_VAL=Execution frequency can't be zero second! FREQUENCY_TEXT_HOUR=Hour FREQUENCY_TEXT_MINUTE=Minute FREQUENCY_TEXT_SEC=Second ITBBU_TEXT=ITBBU PROPERTY_ENCLCONNNAME_TEXT=Enclosure Connector Name PROPERTY_NVDATA_VERSION_TEXT=NVDATA Version MSG_LOGIN_FAILURE_THRICE=<html>You have exceeded the maximum number of login attempts. <br> Please contact the administrator. ADAPTER_OPERATION_12=Set Consistenc(y) Check Properties MSG_CC_ON_ERROR=Stop Consistency Check on Error MSG_CC_FIX_ERROR=Continue Consistency Check and Fix Errors ADAPTER_OPERATION_12_DESC=Specify how the consistency check operation should behave when an error is encountered. PROPERTY_PRODREVLEVEL_TEXT=Product Revision Level LABEL_SELECT_FILE_TEXT=F(i)le LABEL_SELECT_VIRTUAL_DISK_TEXT=S(e)lect Virtual Disk LABEL_ARRAY_TEXT=Available A(r)rays LABEL_HOTSPARE_TEXT=(H)ot Spare BUTTON_ADD_TEXT=A(d)d BUTTON_REMOVE_TEXT=Remo(v)e VDC_LABEL_READPOLICY_TEXT=Read Polic(y) : VDC_VD_WR_POLICY_BAD_BBU=Use Write Throu(g)h for failed or missing battery LABEL_IOPOLICY_TEXT=IO P(o)licy VDC_LABEL_ACCESSPOLICY_TEXT=A(c)cess Policy : GUIDED_LABEL_STRIPESIZE_TEXT=(S)tripe Size: GUIDED_LABEL_READPOLICY_TEXT=(R)ead Policy : GUIDED_VD_WR_POLICY_BAD_BBU=Use Write (T)hrough for failed or missing battery GUIDED_LABEL_IOPOLICY_TEXT=I(O) Policy GUIDED_LABEL_ACCESSPOLICY_TEXT=Access (P)olicy : GUIDED_LABEL_DISKCACHEPOLICY_TEXT=Disk Cache Polic(y) : GUIDED_LABEL_INITSTATE_TEXT=Init St(a)te : BUTTON_CLOSE=Cancel GRPINIT_CHECKBOX_FASTINIT_TEXT=(F)ast Initialization LABEL_DRIVES=Unconfig(u)red Drives VDC_LABEL_ARRAY_TEXT=A(r)rays RECON_PROPERTY_LDRIVENAME_TEXT=(N)ame RECON_PROPERTY_IOPOLICY_TEXT=IO Policy LABEL_NEWVIRTUALDISK_TEXT=New Virt(u)al Disk LABEL_HEALTH_TEXT=Health LABEL_SERVER_TEXT=Ser(v)ers PROPERTY_IOPOLICY_TEXT_2= IO Policy LABEL_FOREIGN_STATE_TEXT=Foreign FOREIGN_CONFIG_MAX_LIMIT_EXIT_MSG=<html>The number of foreign configurations detected exceeds the number that can be displayed.<br> Import or clear the configurations that are displayed <br>and then scan for foreign configurations again.</html> LABEL_FILETYPE_FWFLASH=Firmware Flash Files(*.rom,*.fw) NOIMPORTABLE_VD_MSG_1=Cannot import virtual disk:\nOne or more drives are missing.\nInsert the missing drive(s) and re-scan. NOIMPORTABLE_VD_MSG_2=Cannot import virtual disk:\nOne or more spans are missing.\nInsert the missing drive(s) and re-scan. NOIMPORTABLE_VD_MSG_3=Cannot import virtual disk:\nExceeded number of virtual drives allowed.\nRemove some of the existing virtual disks and re-scan. NOIMPORTABLE_VD_MSG_4=Cannot import virtual disk:\nUnsupported Configuration. Clear the configuration \nor return the drive(s) to the original controller. NOIMPORTABLE_VD_MSG_5=Cannot import virtual disk:\nOutdated drive data. Insert the missing drive(s) and re-scan. NOIMPORTABLE_VD_MSG_6=Import warning: \nPossible outdated drive data.\nInsert the missing drive before importing the configuration.\nImporting the virtual disk without the missing drive may result in data loss. NOIMPORTABLE_VD_MSG_7=Cannot import physical drive: Configuration conflict. The drive’s place may have been taken by another drive,\nit could be part of another configuration, or the drive’s configuration may be incompatible.\nIm,port or clear any other configurations that exist \nand then re-scan or return the drive to the original controller. NOIMPORTABLE_VD_MSG_8=Cannot import virtual disk: One or more drives are orphan. Insert the missing drive(s) and re-scan. NOIMPORTABLE_VD_MSG_9=Cannot import virtual disk: R1E is not supported on this controller. FOREIGN_CFG_GUID_COMBO_LABEL=Select Confi(g)uration FOREIGN_CFG_GUID_TREE_LABEL=Configuration (P)review BUTTON_CLEAR_CONFIG=Clea(r) BUTTON_IMPORT_CONFIG=I(m)port BUTTON_CANCEL_FOREIGN_CONFIG=(C)lose MSG_FOREIGN_DESC_TEXT=Details MSG_CLEAR_FOREIGN_CONFIG=<html>This operation will remove the selected foreign configuration.<br> Are you sure you want to continue?</html> MSG_IMPORT_FOREIGN_CONFIG=<html>This operation cannot be reversed after it is started.<br>Are you sure you want to import the configuration?</html> FOREIGN_MSG_REBUILD_PENDING=Rebuild Pending ADAPTER_OPERATION_11=Schedule Co(n)sistency Check ADAPTER_OPERATION_11_DESC=Establish schedule for consistency check operation. CTRL_OP_CC_RUN_TEXT=Run (c)onsistency check: CTRL_OP_CC_OPTION_HOURLY=Hourly CTRL_OP_CC_OPTION_DAILY=Daily CTRL_OP_CC_OPTION_WEEKLY=Weekly CTRL_OP_CC_OPTION_MONTHLY=Monthly CTRL_OP_CC_OPTION_DISABLE=Disable CTRL_OP_CC_RUN_CONTINUOUS_TEXT=R(u)n consistency check continuously CTRL_OP_CC_START_DATE_TEXT=Sta(r)t on: MONTH_JANUARY_TEXT=January MONTH_FEBRUARY_TEXT=February MONTH_MARCH_TEXT=March MONTH_APRIL_TEXT=April MONTH_MAY_TEXT=May MONTH_JUNE_TEXT=June MONTH_JULY_TEXT=July MONTH_AUGUST_TEXT=August MONTH_SEPTEMBER_TEXT=September MONTH_OCTOBER_TEXT=October MONTH_NOVEMBER_TEXT=November MONTH_DECEMBER_TEXT=December CTRL_OP_CC_START_TIME_TEXT=Start ti(m)e: TIME_AM_TEXT=AM TIME_PM_TEXT=PM TEXT_NOT_AVAILABLE=Not available MSG_EXTERNAL_LUNCH_TIMEOUT=Login failed : Due to timeout! MSG_LDCC_NOT_INIT=<html>The virtual disk has not been initialized. Running a consistency check may result in<br> inconsistent messages in the log. Are you sure you want to continue?<html> MSG_WRITE_CACHE_ENABLE_WARNING=<html>You have elected to enable caching for the virtual disk. Data may<br>be lost or corrupted in the event of a sudden power lost when<br>caching is enabled on a volume with mirroring properties.<br>Are you sure you want to enable caching?</html> MSG_MAX_LEARN_DELAY_INVALID_NUMBER=Invalid Postpone Learn Delay Interval. Postpone Learn Delay Interval cannot be negative or Zero. MSG_MAX_LEARN_DELAY_CONTAINS_NON_NUMERIC_VALUES=Invalid Postpone Learn Delay Interval. Postpone Learn Delay value cannot contain non numeric characters. ABOUT_OKBUTTON_TEXT_DSC=OK BUTTON_OPERATION_GO_DSC=Go BUTTON_BROWSE_TEXT_DSC=Browse LOGINMODE_DSC=Mode ARRAY_LIST_DSC=Array List PHYSICAL_DRIVE_DSC=PHYSICAL DRIVE AUTOLEARN_MODE_DSC=Auto Learn Mode OPMODE_DSC=Operation Mode READ_POLICY_DSC=Read Policy ACCESS_POLICY_DSC=Access Policy DISKCACHE_POLICY_DSC=Disk Cache Policy IO_POLICY_DSC=IO Policy BACK_GROUNDINIT_DSC=Background Initialization CTRL_OP_CC_OPTION_DSC=Consistency Check Opertaion Mode LOGICAL_DRIVE_DSC=Logical Drive BUTTON_SELECTALL_DSC=Select All BUTTON_DESELECTALL_DSC=Deselect All BUTTON_CC_START_DSC=Consistency Check Start BUTTON_CLOSE_DSC=Close Consistency Check Operation BUTTON_CLOSE_DSC_1=Close Intialization Operation BUTTON_CLOSE_DSC_2=Close progress window GRPINIT_CHECKBOX_FASTINIT_DSC=Fast Initialization BUTTON_INIT_START_DSC=Intialization Start CHECKBOX_FASTINIT_DSC=Fast Initialization CHECKBOX_PATROL_CONTINUOUS_DCS=Continuous Patrolling CHECKBOX_DOMAIN_ADDR_DSC=Remote server at IP address" CHECKBOX_BAD_BBU_DSC=Bttary Backup Unit CHECKBOX_CC_RUN_CONTINUOUS_DSC=consistency check continuously ABOUT_SERVERINFO_DSC=Server Info BUTTON_ABORTALL_DSC=Abort All BUTTON_UPDATE_DSC=Update BUTTON_CONNECT_DSC=Connect BUTTON_CANCEL_DSC=Cancel MAXPD_COUNT_DSC=Maximum PD Count for patrolling LABEL_SELECTLD_DSC=Select Excluded Virtual Disks FREQUENCY_HOUR_DSC=Execution Frequency Hours FREQUENCY_MIN_DSC=Execution Frequency Minutes FREQUENCY_SEC_DSC=Execution Frequency Seconds REBUIL_DRATE_DSC=Rebuild Rate PATROL_READRATE_DSC=Patrol Rate BGI_RATE_DSC=BGI Rate CC_RATE_DSC=Check Consistency Rate RECON_RATE_DSC=Reconstruction Rate USER_NAME_DSC=Enter Host User Name PASSWORD_DSC=Enter Host Password FILE_NAME_DSC=Enter Or Select File Name POSTPONELEARN_DELAY_DSC LD_NAME_DSC=Logical Drive Name SERVER_SORT_DSC=Server Sorting HOTSPEAR_ARRAY_DSC=Hotspear Array INIT_STATE_DSC=Intialization Stage AUTO_MODE_DSC=Auto Mode STRIPE_SIZE_DSC=Stripe Size DISK_CACHEPOLICY_DSC=Disk Cache Policy WRITE_POLICY_DSC=Write Policy CACHE_POLICY_DSC=Cache Policy ACCESSPOLICY_DSC=Access Policy INITSTATE_DSC=Initialization State BBU_DSC=Battary Backup Unit Check ARRAYCMB_DSC=Array Combination RAID_LEVEL_DSC=RAID Level BUTTON_ADD_DSC=Add BUTTON_REMOVE_DSC=Remove ACCEPT_ARRAY_DSC=Accept BUTTON_REMOVEHSP_DSC=Remove HotSpare BUTTON_MODIFY_DSC=Modify BUTTON_ACCEPT_DSC=Accept BUTTON_SELECTPRIMARYDISK_DSC=Change Primary Disk BUTTON_RECLAIM_DSC=Reclaim BUTTON_CLEAR_CONFIG_DSC=Clear BUTTON_IMPORT_CONFIG_DSC=Import BUTTON_CANCEL_FOREIGN_CONFIG_DSC=Close VOLUMENAME_DSC=Volume Name MSG_WITH_AFFINITY_DSC=With Affinity MSG_NO_AFFINITY_DSC=No Affinity MSG_CC_FIX_ERROR_DSC=Continue Consistency Check and Fix Errors MSG_CC_ON_ERROR_DSC=Stop Consistency Check on Error REDUNDANCY_ONLY_DSC=Redundancy Only REDUNDANCY_TRY_DSC=Redundancy when possible EXISTINGARRAY_ONLY_DSC=Use Existing Arrays Only REDUNDANCY_NO_DSC=No Redundancy NO_EXISTINGARRAY_DSC=Don't use Existing Arrays BUTTON_AUTOCONF_DSC=Auto Configuration BUTTON_MANUALCONF_DSC=Manual Configuration BUTTON_GUIDEDCONF_DSC=Guided Configuration RECON_INSERT_BUTTON_DSC=Add Drive RECON_DELETE_BUTTON_DSC=Remove Drive RECON_NOCHANGE_BUTTON_DSC=Change RAID Level ##Copyback resource strings REPLACING_PHYSICAL_DRIVE=Replacing Physical Drive COPY_BACK_IN_PROGRESS=Copyback in progress REPLACING_WITH_PHYSICAL_DRIVE=Replacing with Physical Drive OPERATOIN_COPYBACK_TEXT=Replace With COPY_BACK_OP_TEXT=(R)eplace Physical Drive COPYBACK_OP_DESC=Replaces the physical drive and copies the data to the selected component. MSG_REPLACE_BY=will be\nreplaced by COPYBACK_STARTED_CHECK_PROGRESS=This may take some time. Go to the show\nprogress option to view the progress of this\nreplacement or abort the operation. ## Multipathing resource strings PROP_PDREDUNDANTPATH_TEXT=Redundant Paths ## FRU PROPERTY_FRU_TEXT=FRU ## 16 to 64 VDs per array support. CONFIRM_64_VDS_DDF_PARTITION=Following this operation, your storage configuration \nwill contain more than 16 virtual disks.While supported \nby your system, the configuration may not be compatible \nwith other systems that support a maximum of 16 virtual \ndisks per array.Proceeding with this operation may prevent \nyou from moving your configuration to an incompatible system\n Are you sure you want to continue? #CR 69055: Add the ability to make UNCONFIGURED_BAD to UNCONFIGURED_GOOD PHDRIVE_STATE_CHANGE_OP=Change to (U)nconfigured Good PHDRIVE_STATE_CHANGE_OP_DESC=Changes the drive state to Unconfigured Good PROPERTY_FWENCLVER_TEXT=Enclosure FW Version ABOUT_CC_ADVANCED_BUTTON_TEXT=Advanced MSG_CCSCHEDULE_DATE=The specified date occurs in the past MSG_CCDRIVE_TEXT=Virtual Disks CCADVANCED_VDSTOCHECK_TEXT=Select virtual disks to check: MSG_CCMODE_TEXT=Mode CCADVANCED_SEQUENTIAL_MODE_TEXT=Sequential: Check virtual disks one at a time (slower but less performance impact). CCADVANCED_CONCURRENT_MODE_TEXT=Concurrent: Check all selected virtual disks at once (faster but lowers performance). SCHEDULE_CC_ADVANCED=Schedule Consistency Check - Advanced CCADVANCED_CHECK_MODE_TEXT=Consistency check (m)ode: CTRL_BUTTON_CC_ADVANCED_DSC=Consistency Check Advanced Window PROPERTY_CONNECTOR_TEXT=Connector PROPERTY_POSITION_TEXT=Position LABEL_ENABLE_AUTO_LEARN=En(a)ble AUTO_LEARN_ENABLED=Enabled BBU_OPERATION_REFRESH_PROPERTIES=(R)efresh Properties BBU_OPERATION_START_LEARN=(S)tart Learn Cycle BBU_OPERATION_SET_LEARN_PROP=Set Learn Cycle (P)roperties BBU_OPERATION_SET_LEARN_PROP_DESC=Sets the learn cycle properties for the battery backup unit LABEL_DISABLE_AUTO_LEARN=Disa(b)le DELAY_SCHEDULED_LEARN_CYCLE_TEXT = (D)elay scheduled learn cycle by: SCHEDULED_LEARN_CYCLE_TEXT = Scheduled learn cycle: BBU_NOTE = (Note: Please enter a value between 0 to 168 hours.) AUTO_LEARN_TEXT=Automatic Learn Cycles: LABEL_REMIND_LEARN=Re(m)ind me when to start a learn cycle ADAPTER_OPERATION_13=Copyback on SMART alert PROPERTY_SMART_CB_ENABLED=Enabled PROPERTY_SMART_CB_DISABLED=Disabled FIRMWARE_UPDATE_TEXT=Firmware to update: CONTROLLER_FIRMWARE_TEXT=Co(n)troller firmware CURRENT_VERSION_TEXT=Current version: #BIOS_TEXT=BIO(S) FIRMWARE_FILE_NOT_FOUND=The specified file could not be found. Please check the file path and try again. #NCQ update MSG_INCOMPLETE_FOREIGN_CFG=Incomplete Foreign Config. MESSAGE_FOREIGN_CONFIG_DETECTED=<html>Foreign drives were detected. You must import or clear these<br>drives before they can be used.<br><br></html> MSG_CLEAR_FOREIGN_CONFIG=<html>This operation will remove the foreign configuration.<br>Are you sure you want to continue? </html> ENCL_POSITION_TEXT=Position ENCL_SLOT_TEXT=Slot ENCL_BACKPLANE_TEXT=Backplane DRIVE_GROUP_TEXT=Drive Group VIRTUAL_DRIVES_TEXT=Virtual Drives VIRTUAL_DRIVE_TEXT=Virtual Drive DRIVES_TEXT=Drives DEDICATED_HOT_SPARES_TEXT=Dedicated Hot Spares TOTAL_FREE_CAPACITY_TEXT=Total Free Capacity CAPACITY_TEXT=Capacity GLOBAL_HOT_SPARES_TEXT=Global Hot Spares UNCONFIGURED_DRIVES_TEXT=Unconfigured Drives SPANNED_DRIVE_GROUP_TEXT=Spanned Drive Group SPAN_TEXT=Span PROPERTY_ENCLOSUREID_TEXT=Enclosure ID PROPERTY_ENCLOSUREMODEL_TEXT=Enclosure Model PROPERTY_ENCLLOCATION_TEXT=Enclosure Location PROPERTY_USABLE_CAPACITY_TEXT=Usable Capacity PROPERTY_STATUS_TEXT=Status PROPERTY_RAW_CAPACITY_TEXT=Raw Capacity PROPERTY_TYPE_TEXT=Type PROPERTY_SOLID_STATE_DRIVE_TEXT=Solid State Drive PROPERTY_DRIVE_TYPE_TEXT=Drive Type SSD_TEXT=SSD HOURS=hours DEDICATED_HSP_DESC = <html>A dedicated hot spare will only replace problematic drives on \ selected drive groups.<br><br></html> ################################################################## #### BLACK ROCK Changes ## ################################################################## #### Controller & FDE Encryption - Configuration Management ## PROPERTY_SECURED_TEXT = Secured PROPERTY_DRV_SECURITY_METHOD_TEXT = Drive security method PROPERTY_FDE_CAPABLE_TEXT = Full Disk Encryption capable PROPERTY_DRV_SECURITY_CAPABLE_TEXT = Drive security capable PROPERTY_DRV_SECURITY_ENABLED_TEXT = Drive security enabled PROPERTY_DRV_SECURITY_DISABLED_TEXT = Drive security disabled DESC_ENCR_METHOD_FDE = FDE Only DESC_ENCR_METHOD_FDE_AND_CTRL = FDE and Controller-based PROPERTY_DRIVE_SECURITY_METHOD = Drive security method DESC_ENCRYPTION_METHOD_FDE = Full disk encryption DESC_ENCRYPTION_METHOD_CTRL = Controller-based encryption LABEL_ENCRYPTION_TEXT = En(c)ryption : TEXT_FDE_WHEN_POSSIBLE = FDE when possible TEXT_CONTROLLER_BASED = Controller-based only TEXT_NO_ENCRYPTION = No Encryption LABEL_ENCRYPTION_GROUP = Encryption LABEL_USE_FDE_WHEN_POSSIBLE = Use (f)ull disk encryption when possible LABEL_USE_CTRL_BASED_ENCRYPTION = Use (c)ontroller based encryption only LABEL_NO_ENCRYPTION = No encr(y)ption LABEL_USE_FDE = Use (f)ull disk encryption SELECT_ENCRYPTION_METHOD_DIALOG_TITLE = Select Drive Security Method SELECT_DRIVE_SECURITY_METHOD_DESC = <html>Select the drive security method to use for \ Drive Group {0}.<br><br>Note: Once Drive Group {0} is secured, \ you will not be able to<br>remove the security without deleting \ the virtual drives.<br><br></html> SELECT_ENCR_METHOD_DESC = <html>Select the encryption method to use for Drive Group ENCRYPTION_METHOD_NOTE1 = <br><br>Note: Once Drive Group ENCRYPTION_METHOD_NOTE2 = is encrypted, you will not be able to<br>remove encryption without relocating or \ clearing all virtual drives.<br><br></html> CONFIRM_FDE_DIALOG_TITLE = Confirm Full Disk Encryption CONFIRM_FDE_WARN_TEXT = <html>The following global hot spares will not cover drive groups<br>secured using \ Full Disk Encryption (FDE) because they are not<br>capable of FDE. To ensure that \ drive groups secured using FDE<br>are covered, you should use FDE-capable drives \ as global hot<br>spares.<br><br></html> LABEL_GLOBAL_HOT_SPARES_INCAPABLE_OF_FDE = (G)lobal hot spares incapable of FDE: ENCRYPTION_WARN_TEXT = <html>Once a drive group is secured, you will not be able to remove the \ security<br>without deleting the virtual drives.<br><br>Are you sure you \ want to use FDE?<br></html> DRIVES_USING_FDE_DIALOG_TITLE = Cannot Use Secure FDE Drives DRIVES_USING_FDE_ERROR_DESC1 = <html>The following drives are secured using Full Disk Encryption<br>(FDE). You \ cannot use these drives in a drive group that is not<br>secured using FDE \ until you securely erase the drives or<br>disable drive security on the \ controller.<br><br></html> DRIVES_USING_FDE_DESC1 = The following drives are currently encrypted using full disk\ \nencryption. You cannot use these drives in a non-FDE drive \ \ngroup until you clear their full disk encryption. DRIVES_USING_FDE_DESC2 = It is not possible \nto create a configuration without using these drives. LABEL_FDE_DRIVES = (D)rives using FDE: CONFIRM_CTRL_ENCR_TEXT = Do you want to continue without using these drives? CONFIRM_CTRL_ENCRYPTION_DIALOG_TITLE = Confirm Controller Encryption CTRL_ENCRYPTION_WARN_DESC=<html>One or more drive groups that are capable of Full Disk Encryption<br>(FDE) \ will not be used to their full security capability.<br><br>Once a drive group is \ secured, you will not be able to remove<br>the security without deleting the \ virtual drives.<br><br>Are you sure you want to use controller encryption \ only?<br><br></html> CTRL_ENCRYPTION_WARN_DESC1 = <html>Drive group {0} is capable of Full Disk Encryption (FDE) \ and will<br>not be used to their full security capability.<br><br>Once a drive group is \ secured, you will not be able to remove<br>the security without deleting the \ virtual drives.<br><br>Are you sure you want to use controller encryption \ only?<br><br></html> CONFIRM_DRIVE_GROUP_ENCRYPTION_DIALOG_TITLE = Confirm Drive Group Encryption DRIVE_GROUP_ENCRYPTION_DESC1 = All of the drives in Drive Group DRIVE_GROUP_ENCRYPTION_DESC2 = will be encrypted using \nfull disk encryption. \n\nOnce drive group DRIVE_GROUP_ENCRYPTION_DESC3 = is encrypted, you will not be able to \nremove encryption without relocating \ or clearing all virtual \ndrives.\n\nAre you sure you want to use full disk encryption?\n CONFIRM_CLEAR_FDE_DIALOG_TITLE = Confirm Clear FDE CLEAR_FDE_DESC1 = When you clear full disk encryption from Drive CLEAR_FDE_DESC2 = , any data \non Drive CLEAR_FDE_DESC3 = will be permanently lost. \n\nAre you sure you want to clear Drive CLEAR_FDE_DESC4 = ?\n CTRL_PASS_PHRASE_ERROR_DIALOG_TITLE = Controller Password Error CONTROLLER_TEXT = Controller: CTRL_PASS_PHRASE_ERROR_DESC = \n\nThere is a problem with the encryption password on \nyour controller that prevents \ access to your drives. \n\nYou must disable and re-enable encryption, and then \ \nscan for a foreign configuration to fix the problem.\n NON_FDE_GLOBAL_HS_TITLE = Non-FDE Global Hot Spare NON_FDE_GLOBAL_HS_DESC = <html>This global hot spare will not protect the following \ drive<br>groups because it is not capable of full disk encryption<br>(FDE). \ <br><br>Only hot spares capable of FDE can protect drive groups<br>secured using \ FDE.<br><br></html> FDE_DRIVE_GRP_LABEL = (F)DE Drive Groups: NON_FDE_DEDICATED_HS_TITLE = Non-FDE Dedicated Hot Spare NON_FDE_DEDICATED_HS_DESC = <html>This dedicated hot spare will not protect the following \ drive<br>groups because it is not capable of full disk encryption<br>(FDE). \ <br><br>Only hot spares capable of FDE can protect drive groups<br>secured using \ FDE.<br><br></html> DRIVE_GRP_LABEL = (D)rive Groups: CONFIRM_SECURE_DG_TITLE = Confirm Secure Drive Group CONFIRM_SECURE_DG_DESC = <html>All of the drives in Drive Group {0} will be secured using<br> \ Full Disk Encryption.<br><br>Once a drive group is secured, you will not be able \ to<br>remove the security without deleting the virtual drives.<br><br>Are you \ sure you want to secure Drive Group {1}?</html> SECURE_USING_FDE = Secure Using (F)DE SECURE_USING_FDE_DESC = Secures the selected drive group using Full Disk Encryption #### Key Management, Key Creation, Key Deletion, Key Reprovisioning ## SELECT_DRIVE_GROUP_DEDHSP_TEXT = (S)elect drive group(s) LABEL_SUGGESTED_SECURITY_KEY=Sug(g)ested security key: SUGGESTED_SECURITY_KEY_DIALOG_TITLE = Suggested Security Key SUGGESTED_SECURITY_KEY_DESC = <html>The security key below was generated by your controller.\ If you choose to use this<br>security key, you will need to confirm it by typing each character as shown.\ You can<br>leave this dialog open while you confirm the security key.<br><br>Be sure to record this security key, as your \ controller will not keep any <br>record of it.<br><br></html> ENABLE_ENCRYPTION_DESC = <html>When encryption is enabled, data will be secured using a Password.<br>Encryption must \ be enabled to create encrypted virtual drives.<br><br>The Password is case-sensitive.\ It must be between eight and<br>thirty-two characters and contain at least one number, \ one lowercase letter,<br>one uppercase letter, and one non-alphanumeric character \ e.g. ! * @ + #).<br><br>Note: For maximum security, use thirty-two varied characters.</html> MESSAGE_CANNOT_DISABLE_DRIVE_SECURITY = <html>You cannot disable drive security because one or more secure<br>drive groups are present \ on this controller.<br><br>In order to disable drive security, you must first delete the \ virtual drives on all<br>secure drive groups.<br><br></html> ERROR_PASSWORD_MISMATCH = The characters entered in the Password field and the confirm\nfield do not match.\n\nPlease re-enter and confirm your Password. ERROR_INVALID_PASSPHRASE = The Password entered either uses an invalid character or does\nnot meet the minimum security requirements.\n\n\ The Password is case-sensitive. It must be between eight and\nthirty-two characters and contain at least one number, \ one\nlowercase letter, one uppercase letter, and one non-alphanumeric\ncharacter (e.g. < > @ +).\n\n\ The space character is not permitted in the Password.\n\nPlease specify a Password that meets the above requirements.\n\n ERROR_INVALID_SECURITY_KEY = The security key entered either uses an invalid character or does\nnot meet the minimum security requirements.\n\n\ The security key is case-sensitive. It must be between eight and\nthirty-two characters and contain at least one number, \ one\nlowercase letter, one uppercase letter, and one non-alphanumeric\ncharacter (e.g. < > @ +).\n\n\ The space character is not permitted in the Password.\n\nPlease specify a security key that meets the above requirements.\n\n ERROR_INCORRECT_PASSPHRASE = The Password entered was incorrect. Please verify your\nPassword and try again. ERROR_INCORRECT_SECURITY_KEY = The security key entered was incorrect. Please verify your\nsecurity key and try again. MESSAGE_CONFIRM_CHANGE_SECURITY_SETTINGS = <html>You chose to change the security key identifier | security key | security key<br>identifier \ and security key and not to require<br>an optional Password. It is highly recommended that \ you<br>change the security key identifier whenever you change the<br>security key.<br><br>The existing \ configuration on this controller will be updated to<br>use the new security settings. If you previously \ removed any<br>secured drives, you will still need to supply the old security key<br>to import \ them.<br><br>Are you sure you want to change the drive security settings?<br><br></html> MESSAGE_CONFIRM_ENABLE_ENCRYPTION = <html>Drive security will be enabled on this controller using the<br>specified \ security key identifier, LABEL_AND = and LABEL_OR = or LABEL_NOT = not MESSAGE_SECURITY_KEY_ID = security key identifier MESSAGE_SECURITY_KEY = security key MESSAGE_PASSPHRASE = Password MESSAGE_BE_SURE_TO_RECORD = Be sure to record this information. MESSAGE_SECURITY_KEY_PROMPTED = You may be prompted to<br>enter the security key if you perform certain operations MESSAGE_SECRET_KEY_REBOOT = you<br>will be prompted to enter the Password every time the server boots. MESSAGE_FORGOT_SECURITY = If you forgot the {0} {1} {2}you could lose access<br>to your data.</html> MESSAGE_ARE_YOU_SURE_TO_CHANGE = Are you sure you want to change the drive security settings? MESSAGE_ARE_YOU_SURE_TO_ENABLE = Are you sure you want to enable the drive security? MESSAGE_CHOOSE_TO_REQUIRE_PASSPHRASE = You choose to {0}require an optional Password. MESSAGE_HIGHLY_RECOMMENDED = It is highly recommended that you change the<br>security key \ identifier whenever you change the security key. MESSAGE_PREV_REMOVE_DRIVES = If you previously removed any<br>secured drives, you will \ still need to supply the old security key<br>to import them. MESSAGE_CHOOSEN_CHANGE = You choose to change the {0} MESSAGE_CHOOSEN_PASSPHRASE = choose to {0} require an optional Password MESSAGE_EXISTING_CONFIG = The existing configuration on this controller will be<br>updated \ to use the new security settings. MESSAGE_CONFIRM_CHANGE_PASSPHRASE = If you change the Password, the existing configuration on\n\ this controller will be updated to use the new Password. If\n\ you have removed any encrypted drives, they will continue to\n\ use the old Password.\n\nAre you sure you want to change the Password?\n\n MESSAGE_CONFIRM_DISABLE_ENCRYPTION = If you disable drive security, you will not be able to create any\nnew \ secure virtual drives{0}. Disabling drive security will\nnot \ affect the security or data of foreign drives.\n\nIf you removed any \ drives that were previously secured, you will\nstill need to enter \ the security key when you import them.\nOtherwise, the data contained \ on those drives will not be accessible.\n\nAre you sure you want to disable \ drive security?\n\n MESSAGE_ALL_FDE_DRIVES_ERASED = and all secure unconfigured FDE\ndrives will be securely erased MESSAGE_CONFIRM_DISABLE_SECURITY_FDE = and all secure unconfigured FDE drives will be securely erased ERROR_SECURITY_KEY_MISMATCH = The characters entered in the security key field and the confirm\nfield do not match.\n\nPlease re-enter and confirm your security key. TITLE_INVALID_PASSPHRASE = Invalid Password TITLE_INVALID_SECURITY_KEY = Invalid Security Key TITLE_PASSPHRASE_MISMATCH = Password Mismatch TITLE_INCORRECT_PASSPHRASE = Incorrect Password TITLE_ENCRYPTION_ENABLED = Encryption Enabled TITLE_CONFIRM_PASSPHRASE_CHANGE = Confirm Change Password TITLE_CONFIRM_DISABLE_DRIVE_SECURITY = Confirm Disable Drive Security TITLE_CANNOT_DISABLE_DRIVE_SECURITY = Cannot Disable Drive Security TITLE_AUTHENTICATE_DRIVE_SECURITY_SETTINGS = Authenticate Drive Security Settings TITLE_INCORRECT_SECURITY_KEY = Incorrect Security Key TITLE_DRIVE_SECURITY_NEEDED_TO_IMPORT = Drive Security Required to Import TITLE_CANNOT_IMPORT_LOCKED_DRIVES = Cannot Import Locked Drives CHANGE_PASSPHRASE_DIALOG_TITLE = Change Password ENABLE_ENCRYPTION_DIALOG_TITLE = Enable Encryption TITLE_CONFIRM_ENABLE_DRIVE_SECURITY = Confirm Enable Drive Security TITLE_CONFIRM_CHANGE_SECURITY_SETTINGS = Confirm Change Security Settings TITLE_SECURITY_KEY_MISMATCH = Security Key Mismatch LABEL_SUGGEST_PASS_PHRASE = Su(g)gest Password LABEL_SUGGEST_SECURITY_KEY = Su(g)gest Security Key LABEL_PASS_PHRASE = Pass p(h)rase: LABEL_CONFIRM = (C)onfirm: LABEL_CONFIRM_SECURITYKEY = (C)onfirm: LABEL_CONFIRM_PASSWORD = C(o)nfirm: LABEL_OLD_PASS_PHRASE = Old (p)ass phrase: LABEL_USE_PASS_PHRASE = (U)se a Password in addition to the security key LABEL_CONTROLLER = Controller: LABEL_ENCRYPTION_STATUS_ENABLED = Drive security is currently enabled. LABEL_ENCRYPTION_STATUS_DISABLED = Drive security is currently disabled. LABEL_ENCRYPTED_VIRTUAL_DRIVES = (E)ncrypted Virtual Drives: TOOL_TIP_PASS_PHRASE = Please enter a valid Password BUTTON_LABEL_OK = Ok BUTTON_LABEL_CANCEL = Cancel BUTTON_LABEL_YES = (Y)es BUTON_LABEL_NO = (N)o BUTTON_USE_KEY = (U)se Key BUTTON_ENABLE_ENCRYPTION = Enable (D)rive Security BUTTON_CHANGE_PASSPHRASE = Change Sec(u)rity Settings BUTTON_DISABLE_ENCRYPTION = Disable (D)rive Security OPERATION_CHANGE_DRIVE_SECURITY = Change Dri(v)e Security OPERATION_CHANGE_DRIVE_SECURITY_DESC = Changes the controller's drive security settings LABEL_SECURE_KEY_ID = Security key (i)dentifier: LABEL_SECURITY_KEY = Security (k)ey: LABEL_NEW_SECURITY_KEY = New Security (K)ey: LABEL_OLD_SECURITY_KEY = Old security (k)ey: LABEL_ENTER_SECURITYKEY_AND_PASSPHRASE = Please enter the current security key and Password. LABEL_ENTER_SECURITYKEY_ONLY = Please enter the current security key. LABEL_USE_CURRENT_SECURE_KEY_ID = (U)se the existing security key identifier. LABEL_CURRENT_SECURITY_KEY_IDENTIFIER = Current security key (i)dentifier: LABEL_ENTER_NEW_SECURITY_KEY_IDENTIFIER = (E)nter a new security key identifier LABEL_NEW_SECURITY_KEY_IDENTIFIER = New (s)ecurity key identifier: LABEL_USE_CURRENT_SECURITY_KEY = Use the e(x)isting drive security key LABEL_ENTER_NEW_SECURITY_KEY = Enter a new drive securi(t)y key LABEL_RECORD_SECURITY_SETTINGS = I (r)ecorded the security settings for future reference. LABEL_CURRENT_SECURITY_KEY = (C)urrent security key: ENABLE_DRIVE_SECURITY_INTRODUCTION_WIZARD_PAGE_TITLE = Enable Drive Security - Introduction ENABLE_DRIVE_SECURITY_ENTER_SECURITY_KEY_ID_WIZARD_PAGE_TITLE = Enable Drive Security - Enter Security Key ID ENABLE_DRIVE_SECRUITY_ENTER_SECURITY_KEY_WIZARD_PAGE_TITLE = Enable Drive Security - Enter Security Key ENABLE_DRIVE_SECURITY_ENTER_PASSPHRASE_WIZARD_PAGE_TITLE = Enable Drive Security - Enter Password CHANGE_DRIVE_SECURITY_INTRODUCTION_WIZARD_PAGE_TITLE = Change Security Settings - Introduction CHANGE_DRIVE_SECURITY_ENTER_SECURITY_KEY_ID_WIZARD_PAGE_TITLE = Change Security Settings - Security Key ID CHANGE_DRIVE_SECURITY_ENTER_SECURITY_KEY_WIZARD_PAGE_TITLE = Change Security Settings - Security Key CHANGE_DRIVE_SECURITY_ENTER_PASSPHRASE_WIZARD_PAGE_TITLE = Change Security Settings - Password # Modifed for CR LSIP200010075 start TITLE_SECURITY_BASED_OPERATION_ENABLE=Enable Drive Security - Enter Security Key Details TITLE_SECURITY_BASED_OPERATION_CHANGE=Change Drive Security - Change Security Key Details BUTTON_SECURITY_BASED_OPERATION_ENABLE = E(n)able Drive Security BUTTON_SECURITY_BASED_OPERATION_CHANGE = (C)hanges Drive Security TITLE_SECURITY_KEY_ID=Security Key Identifier TITLE_SECURITY_KEY=Security Key TITLE_PASSWORD=Password LABEL_PASSWORD=Pass(w)ord: LABEL_USE_PASS_BOOT=(P)ause for password at boot time LABEL_USE_STRONG_PWD=En(f)orce strong password security ERROR_INVALID_PASSPHRASE_UNSTRONG=The Password entered either uses an invalid character or does\nnot meet the minimum security requirements.\n\n\ The Password is case-sensitive. It must be between eight and\nthirty-two characters. \n\n\ Please specify a Password that meets the above requirements.\n\n ENTER_SECURITY_KEY_ID_PAGE_DESC=<html>Specify a security key identifier. The controller has provided a default identifier for you. You may <br> \ use this string or enter your own identifier.<br><br> \ If you have multiple security keys, the identifier will help you determine which security key to enter.</html> ENTER_SECURITY_KEY_PAGE_DESC=<html>The security key will be used to lock each self encrypted drive attached to the controller.<br><br> \ For maximum security, use thirty-two varied characters, you may optionally choose for the system <br> \ to suggest a strong security key.<br><br> \ Note:<br> \ The security key is case-sensitive and must be between eight and thirty-two characters and <br> \ contain at least one number, one lowercase letter, one uppercase letter, and one non- <br> \ alphanumeric character (e.g. >@+). </html> ENTER_PASSWORD_PAGE_DESC=<html>Optionally, you may enter a pass word to provide additional security. If you choose "Pause for <br> \ password at boot time, you must enter it whenever you boot your server.<br><br> \ Note:<br> \ The password is case-sensitive and must be between eight and thirty-two characters.<br><br> \ If enforce strong password security is selected, then password field should contain at least one <br> \ number, one lower case letter, one uppercase letter, and one non-alphanumeric character <br> \ (e.g. >@+).</html> ENABLE_DRIVESECURITY_DESC=Enabling drive security on this controller will have the option to create secure virtual drives using a {0}. CHANGE_DRIVESECURITY_DESC=Drive security is currently enabled. This wizard will guide you through changing the drive security settings on this controller. DRIVESECURITY_BE_SURE_TEXT = <html>Be sure to record this information. You may be prompted to enter the {0} if you <br>perform certain operations. \ If you forgot the {0}, you could lose access to your data.</html> # Modifed for CR LSIP200010075 end ENABLE_DRIVE_SECURITY_INTRO_DESC = <html>This wizard will guide you through enabling drive security on this controller.<br>Once you enable \ drive security, you will have the option to create secure<br>virtual drives using a security key.<br><br>First, \ you will create the security key identifier. This identifier displays<br>whenever you must enter the security \ key. If you have multiple security<br>keys, the identifier will help you determine which security key to \ enter.<br><br>Next, you will create the security key. You may need to enter the security<br>key in order to \ perform certain operations. The controller can suggest a<br>strong security key.<br><br> ENABLE_DRIVE_SECURITY_INTRO_PASSPHRASE = Finally, you will have the option to create a Password. The \ Password<br>provides additional security. If you choose to \ require a Password, you<br>must enter it whenever you boot your \ server.<br><br> CHANGE_DRIVE_SECURITY_INTRO_DESC = <html>Drive security is currently enabled. This wizard will guide you through<br>changing the drive security \ settings on this controller.<br><br>First, you will have the option to edit the security key identifier. \ This identifier<br>displays whenever you must enter the security key. If you have multiple<br>security keys, \ the identifier will help you determine which security key to<br>enter.<br><br>Next, you will have the option \ to edit the security key. You may need to<br>enter the security key in order to perform certain operations. \ The controller<br> can suggest a strong security key.<br><br> CHANGE_DRIVE_SECURITY_INTRO_PASSPHRASE = Finally, you will have the option to add or change the Password. \ The pass<br>phrase provides additional security. If you choose to require a \ Password,<br>you must enter it whenever you boot your server.<br><br> CHANGE_SECURITY_KEY_ID_PAGE_DESC = <html>Select whether you want to keep the existing drive security key identifier or enter a new one. If <br> \ you have multiple Security keys, the identifier will help you determine which Security key to enter. <br><br> \ Note: If you plan to change the Security key, it is highly recommended that you change the <br>\ security key identifier. Otherwise, you will not be able to differentiate between the Security keys.<br></html> CHANGE_SECURITY_KEY_PAGE_DESC = <html>Select whether you want to keep the existing drive security key or enter a new one.<br><br> \ For maximum security, use thirty-two varied characters, you may optionally choose for the system <br> \ to suggest a strong security key. <br><br> \ Note:<br> \ The security key is case-sensitive and must be between eight and thirty-two characters and <br> \ contain at least one number, one lowercase letter, one uppercase letter, and one non- <br> \ alphanumeric character (e.g. >@+). </html> CHANGE_PASSWORD_PAGE_DESC1 = <html>Your controller currently has an optional password for additional security. You may change the <br> \ password if desired. If you wish to keep the existing password, you must enter it again here.<br><br> \ Note:<br> \ The password is case-sensitive and must be between eight and thirty-two characters.<br><br> \ If enforce strong password security is selected, then password field should contain at least one <br> \ number, one lower case letter, one uppercase letter, and one non-alphanumeric character <br> \ (e.g. >@+).</html> CHANGE_PASSWORD_PAGE_DESC2 = <html>Your controller does not currently have an optional password for additional security. You may add <br> \ one if desired. You will be required to enter it every time the server boots.<br><br> \ Note:<br> \ The password is case-sensitive and must be between eight and thirty-two characters.<br><br> \ If enforce strong password security is selected, then password field should contain at least one <br> \ number, one lower case letter, one uppercase letter, and one non-alphanumeric character <br> \ (e.g. >@+).</html> AUTHENTICATE_DRIVE_SECURITY_SETTINGS_DESC = <html>Authentication is required for the changes that you requested to the drive<br>security \ settings. Please enter the current security key to authenticate these<br>changes.<br><br></html> CONFIRM_DELETE_VIRTUAL_DRIVE_WARN1 = You have chosen to delete Virtual Drive CONFIRM_DELETE_VIRTUAL_DRIVE_WARN_FDE=All data on the virtual drive will be lost.\n\n CONFIRM_DELETE_VIRTUAL_DRIVE_WARN_CONTROLLER=All data on the virtual drive will be permanently erased.\n\n CONFIRM_DELETE_VIRTUAL_DRIVE_WARN2=Are you sure you want to delete Virtual Drive CONFIRM_CLEAR_CONFIG_WARN_FDE = You have chosen to clear the configuration. This will \ destroy \nall virtual drives. All data on all virtual drives will be \ lost.\n\nAre you sure you want to clear the configuration? CONFIRM_CLEAR_CONFIG_WARN_CONTROLLER = You have chosen to clear the configuration. This will \ destroy \nall virtual drives. All data on all virtual drives \ will be securely \nerased. \n\nAre you sure you want to clear the configuration? CONFIRM_SECURE_ERASE_TITLE = Confirm Secure Erase CONFIRM_SECURE_ERASE_WARN = <html>When you securely erase a drive, any data on the drive will<br>be \ permanently lost.<br><br>Are you sure you want to securely erase the drive in ENCLOSURE_TEXT = Enclosure SLOT_TEXT = Slot DRIVE_SECURITY_KEY_ERROR_MSG = There is a problem with the drive security key on your \ncontroller \ that prevents access to your drives.\n\nTo fix the problem, disable \ and then re-enable the drive \nsecurity feature on your controller, \ then scan for a \nforeign configuration. Your data will remain secure. #### Importing foreign configuration #### ENCRYPTION_REQUIRED_TO_IMPORT_DIALOG_TITLE=Encryption Required To Import LABEL_LOCKED_DRIVES=(L)ocked Drives: ENCRYPTION_REQUIRED_DESC=<html>You cannot import the following locked foreign drives because<br> encryption is disabled on your controller.Only unlocked drives<br> may be imported.</html> ENCRYPTION_REQUIRED_CONTINUE_LABEL=Do you want to continue? UNLOCK_FOREIGN_DRIVES_TITLE=Unlock Foreign Drives UNLOCK_FOREIGN_DRIVES_DESC = <html>One or more foreign drives are locked using LKM mode.<br><br>\ In order to import these drives, you will need to provide the security key used to secure them. If you<br>want want to import only unlocked drives, \ leave the security key field blank and select Continue.<br><br>If the locked drives use different \ security keys, enter one security key and repeat the import<br>process for the remaining locked \ drives.<br><br></html> CANNOT_IMPORT_LOCKED_DRIVES_DESC = <html>You cannot import the following foreign locked drives because the controller<br>\ does not support drive security. Only unlocked drives may be imported. <br><br></html> DRIVE_SECURITY_NEEDED_TO_IMPORT_DESC = <html>You cannot import the following foreign locked drives because<br>\ drive security is disabled on your controller. Only unlocked drives<br>\ may be imported. You must enable drive security in order to<br>\ import locked foreign drives.<br><br></html> UNLOCK_FOREIGN_DRIVES_SECURITY_KEY_LABEL = (S)ecurity Key UNLOCK_FOREIGN_DRIVES_DESC4=<html>If you do not know the Password, you can press Continue to import any <br> unlocked foreign drives. If you do not care about the data on these drives,<br> you can clear the drives to remove encryption and delete all existing data.</html> BUTTON_CONTINUE_TEXT=(C)ontinue REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_TITLE=Remove FDE from Unconfigured Drives REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_DESC1=<html>One or more of the drives that you unlocked does not have <br> any detectable configuration to import. In order to use these <br> drives in a new configuration, their existing full disk encryption <br> must be removed.</html> REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_DESC2=<html>If there is any undetected data on the drives below, removing <br> full disk encryption will permanently delete that data. If you do <br> not want to clear the data on these drives, click No to leave <br> them encrypted and import only drives that have <br> configurations.</html> DRIVES_TO_CLEAR_LABEL=(D)rives to clear: REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_DESC3=<html>There is no way to undo this destructive operation. Are you <br> sure you want to clear these drives?</html> CLEAR_LOCKED_FOREIGN_TITLE=Clear Locked Foreign Configuration CLEAR_LOCKED_FOREIGN_DRIVES_DESC1=One or more foreign drives are locked and cannot be cleared. CLEAR_LOCKED_FOREIGN_DRIVES_DESC2=<html>In order to clear these drives, you will need to provide either the pass <br> phrase used to encrypt each drive or the manufacturer ID that is typically <br> stamped on the drive. This operation will remove the foreign configuration.</html> CLEAR_LOCKED_FOREIGN_DRIVES_LABEL=Select method to clear drive: CLEAR_LOCKED_FOREIGN_DRIVES_LABEL1=(U)se Password CLEAR_LOCKED_FOREIGN_DRIVES_LABEL2=U(s)e manufacturer ID CLEAR_LOCKED_FOREIGN_DRIVES_LABEL3=(M)anufacturer ID: BUTTON_CLEAR_DRIVE_TEXT=Clear (D)rive MSG_INCORRECT_PASSPHRASE=Incorrect security key. MSG_INCORRECT_MANUFACTURE_ID=Incorrect Manufacturer ID. PHDRIVE_SECURE_ERASE_OP = Instant Secure (E)rase PHDRIVE_SECURE_ERASE_OP_DESC = Securely erases the drive, removing drive security. ######################################################### # CR 71555 Estatoah Falls # ######################################################### ADAPTER_OPERATION_POWER_SETTINGS = Po(w)er Settings ADAPTER_OPERATION_POWER_SETTINGS_DESC = Modify the power management settings. PROPERTY_POWER_STATUS = Power Status PROPERTY_POWERSAVE_ON = On PROPERTY_POWER_SAVE = Powersave PROPERTY_READY_TO_REMOVE = Ready To Remove PHDRIVE_OPERATION_15 = Undo Prepare for Remo(v)al PHDRIVE_OPERATION_15_DESC = Cancels Prepare For Removal operation on a physical disk PHDRIVE_OPERATION_14 = Prepare for Remo(v)al PHDRIVE_OPERATION_14_DESC = Spins down the selected drive to ready it for removal SPIN_DOWN_DRIVE = Sp(i)n Down Drive SPIN_DOWN_DRIVE_DESC = Spins down the selected drive into powersave mode to conserve energy or to prepare for removal. SPIN_UP_DRIVE = Sp(i)n Up Drive SPIN_UP_DRIVE_DESC = Spins up a drive that is in powersave mode to prepare it for use. POWER_SAVE_MODE_DESC_LSI = <html>The controller includes Dimmer SwitchTM technology that conserves energy by<br>placing \ certain unused drives into powersave mode. The controller will automatically<br>spin up \ drives from powersave mode whenever necessary.<br><br></html> POWER_SAVE_MODE_DESC_OTHERS = <html>The controller conserves energy by placing certain unused drives into powersave \ mode.<br>The controller will automatically spin up drives from powersave mode<br>whenever \ necessary.<br><br></html> ALLOW_POWERSAVE_MODE = Allow (u)nconfigured drives to enter powersave mode. LABEL_SPINNING_UP_DRIVES = Spinning up selected drives: LABEL_COMPLETE = complete. TITLE_DRIVES_SPIN_UP_PROGRESS = Progress TITLE_FOREIGN_DRIVES_SPUN_DOWN = Foreign Drives Spun Down FOREIGN_DRIVES_SPUN_DOWN_DESC = <html>The following foreign drives are currently spun down in \ powersave<br>mode. You must spin them up in order to import them. If you do<br>not spin \ them up now, they will be skipped during the import.<br><br></html> LABEL_SPUN_DOWN_FOREIGN_DRIVES = (S)pun down foreign drives: #CR 8624 - Dimmer Switch 2 PROPERTY_HOT_SPARE_SPIN_DOWN = Hot Spare Spin Down PROPERTY_SPIN_DOWN_TIME = Spin Down Time STRING_MINUTES = Minutes PROPERTY_HS_SPIN_DOWN_ENABLED = Enabled PROPERTY_HS_SPIN_DOWN_DISABLED = Disabled SPECIFY_SPIN_DOWN_TEXT = <html>Specify the spin down time delay below for the drives to spin down automatically \ after the<br>specified time.<br><br></html> SPIN_DOWN_TIME_DELAY_LABEL = (S)pin down time delay: POWER_STATE_TRANSITIONING_IMAGE = transitioning_icon.gif POWER_SAVE_IMAGE = psave.png PROPERTY_TRANSITIONING = Transitioning PROPERTY_UNCONFIGURED_GOOD_SPIN_DOWN = Unconfigured Good Spin Down PROPERTY_UNCONFIGURED_GOOD_SPIN_DOWN_ENABLED = Enabled PROPERTY_UNCONFIGURED_GOOD_SPIN_DOWN_DISABLED = Disabled #CR 80834 PROPERTY_VOLTAGE_SENSOR_COUNT = Number of Voltage Sensors LABEL_TEMPERATURE_SENSORS = (T)emperature Sensors LABEL_VOLTAGE_SENSORS_TEXT = (V)oltage Sensors LABEL_VOLTAGE_SENSOR = Voltage Sensor LABEL_STATUS_TEXT = Status LABEL_VOLTAGE_TEXT = Voltage #CR71008 STRING_KILO_BYTE=KB STRING_MEGA_BYTE=MB STRING_GIGA_BYTE=GB STRING_TERA_BYTE=TB STRING_PETA_BYTE=PB #CR99284 MSG_NO_PD_FOUND = Patrol Read cannot be started because there is no configuration available. MSG_BGI_INPROGRESS = Operation cannot be started while initialization is in progress ! LABEL_SELECT_DRIVE_GROUPS = (S)elect drive group(s): #CR LSID100098174 - Sandy Springs PD_MAKE_SYSTEM_DRIVE = Make (J)BOD PD_MAKE_SYSTEM_DRIVE_DESC = Assign Unconfigured Good Drive as JBOD. PD_REMOVE_SYSTEM_DRIVE = Remove (J)BOD PD_REMOVE_SYSTEM_DRIVE_DESC = Removes the JBOD assignment and changes the drive state to Unconfigured Good. #CR 100165 - Block uncertified HDDs PD_STATE_UNCONF_BAD_UNSUPPORTED = Unconfigured Bad (Unsupported) PD_STATE_UNCONF_GOOD_UNSUPPORTED = Unconfigured Good (Unsupported) ## Pinned cache MENU_MANAGE_PRESERVED_CACHE=Preserved Cac(h)e ADAPTER_OPERATION_14=Preserved Cac(h)e ADAPTER_OPERATION_14_DESC=Manage the preserved cache of missing and offline virtual drives DISCARD_PRESERVED_CACHE_BUTTON_TEXT=(D)iscard Cache VIRTUAL_DRIVES_LABEL=(V)irtual drives with preserved cache: MANAGE_PRESERVED_CACHE_TEXT=<html>The controller lost access to one or more drives. When access to<br>the drives was lost, the controller preserved the data in the<br>cache.<br><br>The preserved cache will persist until you import the relevant<br>virtual drives or discard the cache. As long as there is preserved<br>cache, you will not be able to perform certain operations.</html> RETAIN_PRESERVED_CACHE=<html>The controller will retain the remaining preserved cache until you<br>import the virtual drives or choose to discard the cache. As long as<br>you retain the preserved cache, you will not be able to perform<br>certain operations. You can discard the cache at any time by going<br>to the Manage Preserved Cache operation.<br><br>Note: If you reboot your server, you will not be able to start your<br>operating system as long as the preserved cache persists.</html> BUTTON_CLOSE_TEXT_WITH_MNEMONIC=(C)lose NO_PRESERVED_CACHE=No preserved cache detected MSG_GHS_DHS_CREATION_WARNING=<html>The selected drive contains operating system data. If you use this drive<br>in a configuration or as a hot spare, you will permanently lose any<br>data currently stored on the drive.<br><br>Are you sure you want to continue?</html> #### end pinned cache ######################################################### # Venus Configuration Wizard # ######################################################### OPERATION_CREATE_VD = Create (V)irtual Drive #Start - Mode Selection page. CREATE_VD_CHOOSE_MODE_PAGE_TITLE = Create Virtual Drive - Choose mode DESCRIPTION_CHOOSE_MODE_1 = <html>This wizard will help you quickly create virtual drives.<br><br></html> DESCRIPTION_CHOOSE_MODE_2 = <html>Choose how to create the virtual drive:<br><br></html> BUTTON_SIMPLE = (S)imple TOOLTIP_SIMPLE_BUTTON = Simple DESCRIPTION_SIMPLE_MODE = <html>Specify a limited number of settings and have the system pick drives for \ you. This is the easiest way to create a<br>virtual drive.<br><br></html> BUTTON_ADVANCED = (A)dvanced TOOLTIP_ADVANCED_BUTTON = Advanced DESCRIPTION_ADVANCED_MODE = <html>Choose additional settings and customize virtual drive creation. This \ option provides greater flexibility when creating<br>virtual drives for \ your specific requirements.<br><br></html> #End - Mode Selection Page #Start - Drive Group hole selection page DRIVE_GROUP_SELECTION_PAGE_TITLE = Create Virtual Drive - Allocate capacity DESC_WHERE_T0_CREATE = Where do you want to create the new virtual drive? LABEL_AVAILABLE_CAPACITY_ON_DG = Use free capacity on an (e)xisting drive group LABEL_SELECT_A_DG = (S)elect a drive group: LABEL_USE_FREE_DRIVES = Use (u)nconfigured drives(create new drive group) #End - Drive Group hole Selection page #Start - Drive Group and VD settings page CREATE_VD_SETTINGS_PAGE_TITLE = Create Virtual Drive - Drive group and Virtual drive settings VD_SETTINGS_LABEL = <html>Use the suggested virtual drive settings or change them if needed.</html> MIXING_CHECKBOX = (U)se the drive type mixing. MIXING_DESC = <html>The application has detected SAS,SATA mixed drives in the controller.Use the check box for \ <br> drive type mixing if you need.For best result drive type mixing are not recommended.</html> RAID_HEADING = <html>Pick a RAID level to specify the amount of fault tolerance and performance for the virtual drive \ (s).</html> RAID_LABEL = (R)AID level: RAID_DESC = <html>Pick a RAID level to specify the amount of fault tolerance and performance for<br>the virtual drives.</html> RAID0_DESC = <html>Suitable for high performance with zero data redundancy.Choose this option<br>only for non-critical data.</html> RAID1_DESC = <html>\"Disk mirroring\" suitable for high performance with the best<br>data availability.</html> RAID1E_DESC = <html>RAID level that combines RAID 0's striping capabilities with<br>RAID 1's mirroring protection.</html> RAID5_DESC = <html>Suitable for multi-user environments(database or file system) with small<br>I/O size and high proportion of read activity.</html> RAID6_DESC = <html>Suitable for environments requiring redundancy protection beyond RAID 5,<br>but not requiring high write performance.</html> RAID00_DESC = <html>RAID level 00 is a stripe of stripes.</html> RAID10_DESC = <html>RAID level 10 is a stripe of mirrors.</html> RAID50_DESC = <html>Combines the straight block-level striping of RAID 0 with<br>distributed parity of RAID 5.</html> RAID60_DESC = <html>Combines the straight block-level striping of RAID 0 with<br>distributed double parity of RAID 6.</html> RAID0_ICON = R0.png RAID1_ICON = R1.png RAID1E_ICON = R1E.png RAID5_ICON = R5.png RAID6_ICON = R6.png RAID00_ICON = R00.png RAID10_ICON = R10.png RAID50_ICON = R50.png RAID60_ICON = R60.png DRIVE_TYPE_DISABLE_ICON = Drive_Type_Dis.png DRIVE_TYPE_ENABLE_ICON = Drive_Type.png HOTSPARE_DISABLE_ICON = HotSpare_New_Dis.png HOTSPARE_ENABLE_ICON = HotSpare_New.png VIRTUAL_DRIVE_ICON = virtualdrive.png CAPACITY_ICON = capacity.png HOTSPARE_CHECBOX = Assign a h(o)t spare HOTSPARE_DESC = <html>Hot spare will be assigned depending upon the availability of eligible hot spare candidate drives.\ A hot<br> spare drive will takeover for a drive if a failure happens,ensuring your data will remain \ intact.</html> SECURITY_CHECKBOX = Use drive (s)ecurity SECURTIY_DESC = <html>Drive security method will be assigned depending upon the controller settings.The drive security will\ <br> make the virtual drive secure by applying encryption logic to the data in the drive</html> VIRTUAL_DRIVE_LABEL = (V)irtual drives: VIRTUAL_DESC = <html>Choose how many virtual drives you want to create.</html> CAPACITY_LABEL = (C)apacity: CAPACTIY_DESC = <html>Select the capacity for the virtual drive(s).Each virtual drive have the same capacity.</html> #End - Drive Group and VD settings page #Start - Advance Drive Group creation page. ADVANCED_DG_CREATION_PAGE_TITLE = Create Drive Group - Drive Group Settings PICK_RAID_DESC = <html>Create the drive group by specifying the RAID level and Drive security method.</html> LABEL_RAID_LEVEL_ADG = (R)AID level: LABEL_DRIVE_SECURITY = (D)rive security method: DRIVE_SECURITY_DESC = <html>Drive security will make the virtual drive secure by applying encryption logic to<br>underlying data in the drive.</html> NO_ENCRYPTION_DESC = <html>Data in the virtual drives will not have encryption.</html> CTRL_ENCRYPTION_DESC = <html>Data in the virtual drives will be encrypted using controller generated<br>encryption keys.</html> FDE_ENCRYPTION_DESC = <html>Data in the virtual dirves will be encrypted by the drive itself.</html> NO_ENCRYPTION_ICON = noEncryption.png FDE_ENCRYPTION_ICON = controllerEncryption.png CTRL_ENCRYPTION_ICON = controllerEncryption.png BUTTON_CREATE_DG = (C)reate Drive Group BUTTON_CREATE_SPAN = Create (S)pan LABEL_SELECT_UG_DRIVES = Select (u)nconfigured drives: BUTTON_ADD_DRIVE = (A)dd > BUTTON_ADD_HSP = Add H(o)t Spare > BUTTON_REMOVE_DRIVE = < Remo(v)e #End - Advance Drive Group creation page. #Start - Advance Virtual Drive Creation Page. ADVANCED_VD_CREATION_TITLE = Create Virtual Drive - Virtual drive settings LABEL_SPECIFY_PARAMS = Specify parameters for the new virtual drive. LABEL_DRIVE_GROUPS = Drive (g)roups: BUTTON_CREATE_VD = (C)reate Virtual Drive BUTTON_UPDATE_VD = (U)pdate Virtual Drive BUTTON_REMOVE_VD = (R)emove Virtual Drive LABEL_VD_NAME = (V)irtual drive name: LABEL_CAPACITY = Capacit(y): LABEL_UNITS = Uni(t)s: LABEL_INIT_STATE = (I)nitialization state: LABEL_STRIPE_SIZE = Stripe si(z)e: LABEL_READ_POLICY = R(e)ad policy: LABEL_WRITE_POLICY = (W)rite policy: LABEL_IO_POLICY = I/O (p)olicy: LABEL_ACCESS_POLICY = (A)ccess policy: LABEL_DISK_CACHE_POLICY = (D)isk cache policy: #End - Advance Virtual Drive Creation Page. #Start - Configuration Summary page CREATE_VD_CONFIG_SUMMARY_TITLE = Create Virtual Drive - Summary CONFIG_SUCCESS_TITLE = Create Virtual Drive - complete CONFIG_SUCCESS_MSG = The virtual drive(s) successfully created. CONFIG_SUCCESS_CREATE_MORE = The virtual drives were created successfully.\nDo you want to create more virtual drives? CONFIG_FAILED_TITLE = Create Configuration Failed. CONFIG_CONFIRMATION_TITLE = Create virtual Drive - Confirmation CONFIG_CANCEL_MSG = Do you want to close this wizard? CONFIG_SUMMARY_DESC = Review the summary and go back if you need to make corrections. The virtual drive(s) \ will be created when you click finish. CONFIG_SUMMARY_LABEL = (S)ummary: #Start - Advance config summary generation. SUMMARY_TEXT_DG_NAME = Drive group name: SUMMARY_TEXT_RAID_LEVEL = RAID level: SUMMARY_NO_OF_DRIVES_USED = Number of drives used: SUMMARY_NO_OF_DRIVES_PER_SPAN = Number of drives per span: SUMMARY_NO_OF_SPANS = Number of spans: SUMMARY_TEXT_DRIVE_SECURITY_METHOD = Drive security method: SUMMARY_TEXT_HOT_SPARE = Hot spare SUMMARY_TEXT_HSP_YES = Yes SUMMARY_TEXT_HSP_NO = No SUMMARY_TEXT_TOTAL_CAPACITY = Total capacity: SUMMARY_TEXT_FREE_CAPACITY = Free capacity: SUMMARY_TEXT_VD_NAME = Virtual drive {0} name: SUMMARY_TEXT_CAPACITY = Capacity: #End - Advance config summary generation. #End - Configuration Summary page COL_NAME_DG = Drive group name COL_NAME_RL = RAID level COL_NAME_FC = Free capacity LABEL_DG = DG-{0} LABEL_SPANNED_DG = Spanned DG-{0} LABEL_FREE_CAPACITY = Free capacity node {0} ####################################################################### # CRs 94092 and 97537 Estatoah Falls Maintenance ####################################################################### ALWAYS_WRITE_BACK_SELECTED_DESC = <html>Always Write Back mode provides optimal performance, but data loss will <br>\ occur if there is a power failure and no cache battery installed or the battery <br>\ is failed or discharged.<br><br>\Are you sure you want to select Always Write Back mode? <br><br></html> WRITE_THROUGH_SELECTED_DESC = <html>Write Through mode eliminates risk of losing cached data in case of power<br>\ failure. But it may result in slower performance.<br><br>\ Are you sure you want to select Write Through mode? <br><br></html> WRITE_BACK_WITH_BBU_SELECTED_DESC = <html>Write Back with BBU policy enables Write Back caching when BBU is <br>\ installed and charged. It provides optimal balance between data safety and <br>\ performance. <br><br>\ However, slower performance should be expected when BBU is not <br>\ installed,not fully charged, or running through re-learn cycle.<br><br>\ Are you sure you want to select Write Back with BBU mode?<br><br></html> WRITE_BACK_WITH_BBU_SELECTED_NO_OR_BAD_BATTERY_DESC =<html>You have selected Write Back with BBU.<br><br>\There is no cache battery installed or the battery charge is low or the battery<br>\ is failed or the battery is running through re-learn cycle.In this case the <br> write policy will switch to Write Through.<br><br>\ Write Through eliminates risk of losing cached data in case of power<br>failure. But it may result in slower performance.<br><br>\ Write Back with BBU policy enables Write Back caching when BBU is <br>installed and charged. It provides optimal balance between data safety and <br>\ performance.<br><br>\Are you sure you want to select Write Back with BBU mode?<br><br></html> TITLE_ALWAYS_WRITE_BACK_SELECTED =Always Write Back Selected TITLE_WRITE_THROUGH_SELECTED =Write Through Selected TITLE_WRITE_BACK_WITH_BBU_SELECTED =Write Back with BBU Selected RECONSTRUCTION_IN_PROGRESS = <html>You cannot change the properties of a virtual drive. Reconstruction is<br>\ in progress<br><br></html> REASON_FOR_DIFFERENCE_IN_WRITE_POLICY = Reason for difference in Write Policy BBU_NOT_INSTALLED = BBU is not installed BBU_IS_FAILED = BBU is failed BBU_IS_DISCHARGED = BBU is discharged BBU_IN_RE-LEARN_CYCLE = BBU in re-learn cycle RECONSTRUCTION_IS_IN_PROGRESS = Reconstruction is in progress ######################################################################### # Venus - Drive Group Reconfiguration Wizard Changes # ######################################################################### RECONFIG_RAID_SELECTION_PAGE_TITLE = Modify Drive Group - Select the possible RAID level RECONFIG_RAID_SELECTION_INSTRUCTION = <html>This wizard allows you to modify the drive group configuration by adding drives to the virtual drive or removing drives from it, or changing its<br>RAID level.</html> LABEL_DG_NAME = Drive group name: {0} LABEL_RAID_LEVEL = RAID level: RAID {0} LABEL_VD_STATE = Virtual drive state: {0} LABEL_CURRENT_DG_CONFIG = Current drive group configuration LABEL_SELECT_RL = Select the (R)AID level you want to migrate: LABEL_RAID_LEVEL_SELECT = Select LABEL_SELECT_RL_DES = Pick a RAID level to specify the amount of fault tolerance and performance for the virtual drives. RECONFIG_MENU = (M)odify Drive Group RECONFIG_MODE_SELECTION_PAGE_TITLE = Modify Drive Group - Choose the operations LABEL_MODE_SELECTION_HEADING = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2} you can either Add the drives or \ Remove the drives or Migrate the<br>RAID level.<br><br></html> LABEL_MODE_SELECTION_HEADING_WITHOUT_MIGRATE = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2} you can either Add the drives or \ Remove the drives.<br><br></html> LABEL_CHOOSE_OPERATIONS = <html>Choose the operations you want to perform:<br><br></html> LABEL_ADD_DRIVES = (A)dd drives DESC_ADD_DRIVES = <html>Add drive provides a way to reconstruct the existing storage configuration by adding new physical drives.<br><br></html> LABEL_REMOVE_DRIVES = (R)emove drives DESC_REMOVE_DRIVES = <html>Remove drive provides a way to reconstruct the existing storage configuration by removing physical drives.<br><br></html> LABEL_MIGRATE_RL = (M)igrate RAID level DESC_MIGRATE_RL = <html>Migrate RAID Level provides a way to reconstruct the existing storage configuration without adding or removing the \ drives.<br>This has been done by changing the RAID Level only.<br><br></html> RECONFIG_SUMMARY_PAGE_TITLE = Modify Drive Group - Summary LABEL_RECONFIG_PAGE_HEADING = Review the summary and go back if you need to make corrections. The Changes will be made when you click Finish. LABEL_RECONFIG_SUMMARY = Summary: LABEL_RECONFIG_SUMMARY_VD_NAME = Virtual drive name: LABEL_RECONFIG_SUMMARY_NO_DRIVES = Number of drives: LABEL_CURRENT_SETTINGS = Current settings: LABEL_POST_MODI_SETTINGS = Post modification settings: RECONFIG_DG_MODIFICATION_PAGE_TITLE_ADD = Modify Drive Group - Add drive to the current configuration RECONFIG_DG_MODIFICATION_PAGE_TITLE_REMOVE = Modify Drive Group - Remove drive from the current configuration LABEL_DG_MODIFY_REMOVE = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2}, you can remove at most {3} drive(s) from \ the configuration.<br>Use the below table to remove the drive(s) and click next to proceed. You cannot remove a drive \ which is a part of required drive set for the selected<br>RAID level.<br><br></html> LABEL_DG_MODIFY_REMOVE_WO_DRIVES = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2}, you can either remove the \ drives from the table below or proceed<br>without removing any drives.<br><br></html> LABEL_DG_MODIFY_ADD = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2}, you need to add at least {3} drive(s) to the \ configuration.<br>Use the below table to add the drive(s) and click next to proceed.<br><br></html> LABEL_DG_MODIFY_ADD_WO_DRIVES = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2}, you can either add the drives from \ the table below or proceed<br>without adding any drives.<br><br></html> LABEL_SELECT_UG_DRIVES_ADD = Select the unconfigured drive to (a)dd: LABEL_SELECT_DRIVES_REMOVE = Select the drive to remo(v)e: COL_NAME_AVAILABLE_DRIVES = Available Drives COL_NAME_TYPE = Type COL_NAME_CAPACITY = Capacity COL_NAME_STATUS = Status MODIFY_DG_CONFIRM_TITLE = Modify Drive Group - Confirmation MODIFY_DG_CONFIRM_MSG = This operation cannot be stopped. Do you want to continue? ######################################################################### # END - Venus - Drive Group Reconfiguration Wizard Changes # ######################################################################### ################################################################# # START - TG - Drive Group and Virtual Drive Expansion # ################################################################# MENU_VD_EXPAND = (E)xpand TITLE_EXPAND_VD = Expand virtual drive EXPAND_VD_DESC = <html>Use the default percentage value to occupy the remaining capacity in the \ drive group or<br>change the percentage if needed. The virtual drive expansion \ may also expand the<br>drive group if necessary.<br><br>The expansion will occur \ when you click OK. On click of cancel will terminate this<br>operation.<br><br></html> LABEL_CURRENT_VD_CAPACITY = <html><b>Current Capacity: {0}</b></html> AVAILABLE_CAPACITY_TO_GROW = <html><b>Available capacity: {0}</b></html> LABEL_NEW_VD_SIZE = <html><b>Capacity of the virtual drive after expansion: {0}</b></html> BUTTON_EXPAND_TO_MAX = E(x)pand the virtual drive to occupy remaining space in disk group BUTTON_EXPAND_TO_PERCENT = Expand the virtual drive to (p)ercentage of available capacity LABEL_ENTER_PERCENT = (E)nter a percentage of available capacity: ################################################################# # END - TG - Drive Group and Virtual Drive Expansion # ################################################################# #################################################################### # IMAGE FILE NAMES # #################################################################### LABEL_TEMPERATURE_ICON=temperature.jpg LABEL_FAN_ICON=fan.jpg LABEL_POWER_ICON=powersupply.jpg ENCLOSURE_BOX_IMAGE=enclosurebox.jpg UNCONF_ENCLPD_IMAGE=enclosurepd.jpg ONLINE_ENCLPD_IMAGE=onlinepd_in_enclosure.jpg OFFLINE_ENCLPD_IMAGE=offlinepd_in_enclosure.jpg EMPTYSLOT_ENCL_IMAGE=emptyslot_in_enclosure.jpg HOTSPARE_ENCLPD_IMAGE=hotsparepd_in_enclosure.jpg REBUILD_ENCLPD_IMAGE=rebuildpd_in_enclosure.gif DEFAULT_HOST_IMAGE=host.jpg DEGRADED_HOST_IMAGE=degraded.jpg FAILED_HOST_IMAGE=failed.jpg LSI_LOGO_IMAGE=lsi_logo.jpg SELECTED_HOST_IMAGE=selected_host.jpg RIGHT_ARROW=rightarrow.jpg LEFT_ARROW=leftarrow.jpg PHDRIVE_IMAGE=phdrive.png ADAPTER_IMAGE=controller_standard.jpg PORT_IMAGE=port.jpg UNCONFIG_IMAGE=unconfig.png AUTO_CONF=wrench.jpg MANUAL_CONF=hammer.jpg GUIDED_CONF=guided.jpg RECON_INSERT_IMG=plus.jpg RECON_DELETE_IMG=Scissor.jpg RECON_CHANGE_IMG=thread_chaser.jpg RECON_DOWN_IMG=arrowdown.jpg RECON_UP_IMG=arrowup.jpg PHDRIVE_SCSI_IMAGE=scsidrive.jpg NEEDS_ATTENTION_IMAGE=needatn.jpg PHDRIVE_FC_IMAGE=phdrive.png PHDRIVE_SAS_IMAGE=sasdrive.jpg BANNER_SMALL_IMAGE=small_banner.jpg PHDRIVE_SATA_IMAGE=satadrive.jpg LDRIVE_IMAGE=volume.jpg BBU_IMAGE=battery.png BANNER_IMAGE=banner.jpg SPLASH_ICON=msm_splash_screen.jpg SPLASH_ICON_INTEL=rwc_splash_screen.jpg FOREIGN_DRV_SAS=Foreign_Drv_sas.png FOREIGN_DRV_SATA=Foreign_Drv_sata.png DIALOG_BANNER_IMAGE=dialog_banner.jpg LSI_DIALOG_LOGO_IMAGE=dialog_logo.jpg REBUILDDRV_SAS=RebuildDrv_sas.png REBUILDDRV_SATA=RebuildDrv_sata.png VIRTUAL_DISK_NOIMP=VirtualDisk_noimp.png PHYSICAL_DISK_NOIMP_SAS=NoImpDrive_sas.png PHYSICAL_DISK_NOIMP_SATA=NoImpDrive_sata.png LSI_PROGRAM_ICON_16=16_prg_icon.png LSI_LOGIC_BANNER_IMAGE=lsi_logic_banner.jpg LSI_LOGIC_LOGO_IMAGE=lsi_logic_logo.jpg GLOBAL_HOTSPARE_IMAGE=Global_Drv_hotspr.jpg CONTROLLER_NOENCRYPTION=controller_encryp.gif CONTROLLER_ENCRYPTED=controller_noencryp.gif DG_ENCRYPTION=dg_encryp.gif DG_NOENCRYPTION=dg_noencryp.gif DRIVE_FDE_IMAGE = drive_fde.png DRIVE_FDE_LOCK_IMAGE = fde_locked.png DRIVE_FDE_UNLOCK_IMAGE = fde_unlock.png HOTSPARE_FDE_IMAGE = hotspare_fde.png HOTSPARE_GLOBAL_FDE_IMAGE = hotspare_global_fde.png #ESTATOAH FALLS ICONS ARRAY_IMAGE=array.png BACKPLANE_IMAGE=backplane.png CONFIGURED_IMAGE=configured.png CONFIGURED_DRIVES_IMAGE=configured_drives.png FOREIGN_DRIVE_IMAGE=foreign_drive.png FREE_CAPACITY_IMAGE=free_capacity.png FREE_CAPACITY_TOTAL_IMAGE=free_capacity_total.png HOTSPARE_IMAGE=hotspare.png HOTSPARE_GLOBAL_IMAGE=hotspare_global.png HOTSPARES_IMAGE=hotspares.png HOTSPARES_GLOBAL_IMAGE=hotspares_global.png NO_IMPORT_IMAGE=no_import.png REBUILD_IMAGE=rebuild.png SERVER_IMAGE=server.png UNCONFIGURED_IMAGE=unconfigured.png UNCONFIGURED_DRIVES_IMAGE=unconfigured_drives.png VOLUME_IMAGE=volume.png VOLUMES_IMAGE=volumes.png BATTERY_IMAGE=battery.png CDROM_IMAGE=cdrom.png CONTROLLER_LOCK_IMAGE=controller_lock.png CONTROLLER_STANDARD_IMAGE=controller_standard.png CONTROLLER_UNLOCK_IMAGE=controller_unlock.png DEGRADED_IMAGE=degraded.png LABEL_VOLTAGE_ICON= voltage_sensor.png ENCLOSURE_IMAGE=enclosure.png FAILED_IMAGE=failed.png FOREIGN_DRIVE_UNCONFIGURED_IMAGE=foreign_drive_unconfigured.png HOTSPARE_FDE_IMAGE=hotspare_fde.png PARTIAL_DEGRADED_IMAGE=partialdegraded.png TAPE_IMAGE=tape.png VIRTUAL_DISK_NOIMP_IMAGE=virtual_disk_noimp.png SPAN_IMAGE=span.png #CR 100165 - Block uncertified HDDs NON_CERTIFIED_DRIVE_IMAGE = non_supported_pd.png PD_STATE_DIRECT=JBOD #jskarai VENUS-II START MENU_LOGVIEW_TEXT=(L)oad #MENU_LOGSAVE_TEXT=Save as (T)ext #MENU_LOGCLEAR_TEXT=(C)lear MENU_HELPME_TEXT=(C)ontents MENU_ABOUT_TEXT=(A)bout MegaRAID Storage Manager #MENU_LOGSAVE_TEXT_FORMAT=Save as (X)ML BIOS_TEXT=Load BIO(S) SAVEAS=(S)ave as #jskarai VENUS-II END #CR 13015 WARN_REPROVISIONING_ON_SECURED_FDE_DISK = <html>One or more secured FDE drives are chosen for this operation.<br>\ Any data on the drives will be permanently lost.<br><br>Are your sure you want to proceed?<br><br></html> TITLE_WARN_REPROVISIONING_ON_SECURED_FDE_DISK = Confirm instant secure erase #LSID100131239 BBU_CHARGED=Battery is not being charged BBU_DISCHARGED=Battery is not being discharged #LSID100131728 PR_START_TITLE = Patrol Read Start SET_CTRL_TITLE = Set Controller Property PR_DIS_TITLE = Patrol Read Disabled PR_ERROR_TITLE = Patrol Read - Error CC_SCH_TITLE = Consistency Check FOREIGN_CONFIG_IMPORT_TITLE = Foreign Config - Import #TG start CONFIRM_DISABLE_SNAPSHOT_TITLE=Confirm Disable Snapshots CONFIRM_DRIVECLEAN=Confirm Drive Clean Up CONFIRM_CLEAR_SNAPSHOT_STRING=Confirm Clear Snapshots VOLUME_REPOSITORY_IMAGE=volume_snapshot.png REPOSITORY_VIRTUAL_DRIVE_TEXT=Snapshot Repository SNAPSHOTS_TAB_TEXT=Snapshots LDRIVE_OPERATION_ENABLE_SNAPSHOT=E(n)able MegaRAID Recovery LDRIVE_OPERATION_ENABLE_SNAPSHOT_DESC=Enables Snapshot on a VD LDRIVE_OPERATION_DISABLE_SNAPSHOT_DESC=Disables Snapshot on a VD LDRIVE_OPERATION_SNAPSHOT_GARBAGE_COLLECTION=Drive Clean Up (Garbage Collection) LDRIVE_OPERATION_SNAPSHOT_GARBAGE_COLLECTION_DESC=Cleans up all the orphaned PITs LDRIVE_OPERATION_SNAPSHOT_PIT_ROLLBACK=Roll Back Snapshot LDRIVE_OPERATION_SNAPSHOT_PIT_ROLLBACK_DESC=Rolls back to some PIT LDRIVE_OPERATION_SET_SNAPSHOT_PROPERTIES=Set MegaRAID Recovery Proper(t)ies SET_SNAPSHOT_PROPERTIES_TITLE=Set MegaRAID Recovery Properties LDRIVE_OPERATION_SET_SNAPSHOT_PROPERTIES_DESC=Sets the Snapshot Properties PROP_SNAPSHOT_PROP=<html><b>MegaRAID Recovery Properties:</b></html> PROPERTY_SNAPSHOTS_TEXT=MegaRAID Recovery PROPERTY_DRIVE_CLEAN_UP_TEXT=Drive clean up (Garbage collection) ENABLE_SNAPSHOT_TITLE=Enable MegaRAID Recovery ENABLE_SNAPSHOT_CONFIRMATION_TITLE=Enable Snapshot - Confirmation PERCENT_LABEL=(P)ercentage of Base: SNAPSHOT_REPOSITORY_LABEL=(S)napshot Repository: PERCENT_LABEL1=% AUTO_SNAPSHOT=(T)ake snapshot on reboot AUTO_SNAPSHOT_DESC=<html>Selecting this option will take a snapshot of the VD on boot after every successful shutdown. This feature is mainly intended to<br>\ take snapshot of boot VDs to allow restoring the OS on the VD in case of corruption. Before selecting take snapshot on reboot<br>\ on the VD, please ensure that you have copied all data to the VD</html> AUTO_DELETE_SNAPSHOT=Enable (a)uto deletion of snapshot AUTO_DELETE_SNAPSHOT_DESC=Selecting this option would enable auto deletion of old snapshots and allows to create a new snapshots. CONFIRM_ENABLE_SNAPSHOT_TITLE=Confirm Enable Snapshots CONFIRM_DISABLE_SNAPSHOT_TITLE=Confirm Disable Snapshots CONFIRM_ENABLE_SNAPSHOT_NON_REP_CONT1=will become a snapshot repository.<br>\ It should now only be used for storing snapshot-related data. If there<br>\ is any existing data on CONFIRM_ENABLE_SNAPSHOT_NON_REP_CONT2=it will be lost.<br><br>\ Are you sure you want to enable snapshots on BASE_VIRTUAL_DRIVE_TEXT=Snapshot Base PROPERTY_REPOSITORY_TEXT=Repository GRAPHICAL_REP=Graphical representation of repository CONFIRM_DISABLE_SNAPSHOT=<html>If you disable snapshots on this virtual drive, you will lose any<br>\ snapshot-related data that is currently stored on its associated<br>\ snapshot repository and you will not be able to create any new<br>\ snapshots.<br><br>\ Are you sure you want to disable snapshots on DRIVE_CLEAN_UP_TITLE=Drive Clean Up CONFIRM_DRIVE_CLEAN_UP=<html>You have unused snapshot virtual drives in the system. Please bring<br>\ back the drives to use those snapshot repository space or clean up the<br>\ drives so that you can use it for new snapshot repository,<br><br>\ All the old data will be lost when you clean up the drives.<br><br>\ Are you sure you want to clean up the drives?<br>\</html> NAME=Name PROPERTY_TIME_OF_CREATION=Time of creation STATUS=Status CAPACITY_USED=Capacity Used DELETE_SNAPSHOT=(D)elete Snapshot CREATE_VIEW=Create (V)iew LABEL_VIEW_DETAILS=View Details LABEL_VIEW_NAME=View name TARGET_ID=Target ID BUTTON_DELETE_VIEW = Dele(t)e View CREATE_VIEW_TITLE = Create View CREATE_VIEW_CONFIRMATION_TITLE = Create View- Confirmation VIEW_NAME_MANDATORY_MESSAGE=You cannot leave viewname blank. Enter a view name to proceed. VIEW_NAME_MANDATORY_MESSAGE=You cannot leave viewname blank. Enter a view name to proceed. SNAPSHOT_DETAILS=SnapShot Details ASSOCIATED_REPOSITORY=Associated Repository: SNAPSHOT_NAME_TEXT=(E)nter snapshot name: CREATE_SNAPSHOT_BUTTON_TEXT=(C)reate Snapshot SNAPSHOT_TIME_LINE_TEXT=Snapshots time line SNAPSHOT_NAME_MANDATORY=Enter Snapshot Name - Mandatory SNAPSHOT_NAME_MANDATORY_MESSAGE=You cannot leave this field blank. Enter a snapshot name to proceed. PROPERTY_ASSOCIATED_BASEVD_TEXT=<html><b>Associated base virtual drives:</b></html> PROPERTY_TOTAL_CAPACITY_TEXT=Total capacity PROPERTY_NUM_HOLES_TEXT=Number of Holes PROPERTY_PERCENT_CAPACITY_USED_TEXT=Percentage of Capacity used PROPERTY_PERCENT_CAPACITY_REMAINING_TEXT=Percentage of Capacity remaining NO_PITS_TEXT=No PITs found ENTER_VIEW_NAME_LABEL=(E)nter View name: CAPACITY_REMAINING=Capacity remaining STATE=State ROLLBACK_PROGRESS=RollBack Progress INSUFFICIENT_CAPACITY=<html>You do not have any virtual drives available to store the<br>\ snapshot data. You need to create a new virtual drive with<br>\ sufficient capacity to designate as a snapshot repository.<br></html> INSUFFICIENT_CAPACITY_TITLE=Insufficient Capacity LDRIVE_OPERATION_DELETE_SNAPSHOT=Clea(r) Snapshots LDRIVE_OPERATION_DELETE_SNAPSHOT_DESC=Clears All the Snapshots of the VD. CLEAR_SNAPSHOTS_TITLE=(C)lear Snapshots CONFIRM_CLEAR_SNAPSHOT=<html>If you clear snapshots on this virtual drive, you will lose any<br>\ snapshot-related data that is currently stored on its associated<br>\ snapshot repository.<br><br>\ Are you sure you want to clear snapshots on CREATE_CONSISTENCY_SET_SUCCESSFUL=<html>The snapshots were created successfully. Please select the<br>\ snapshot base to see the corresponding details of the<br>\ snapshots.<br></html> CONSISTENCY_SET_CREATED_TITLE=Confirmation Snapshot Created CREATE_VIEW_DESC=<html>Determine the capacity to set aside in the snapshot by specifying a percentage of<br>\ the base virtual drive capacity.<br></html> SNAPSHOT_STATE=Snapshot State SNAPSHOT_STATE_OPERATIONAL=Operational SNAPSHOT_STATE_NONOPERATIONAL=Non Operational CAPACITY_LEFT=Capacity Left SNAP_NAME=Snapshot Name SCD=Snapshot Creation Date AUTO_SNAP=Snapshot on Reboot AUTO_DOS=Auto Deletion of oldest Snapshot PROPERTY_OS_DISK_NAME=OS disk name PROPERTY_ENABLED = Enabled PROPERTY_DISABLED = Disabled DELETE_VIEW_TITLE = Delete View CONFIRM_DELETE_VIEW = <html>You have chosen to delete the View.All the data <br>\ related to this view will be lost.<br><br>\ Are you sure you want to delete the View?</html> DELETE_SNAPSHOT_TITLE = Delete Snapshot CONFIRM_DELETE_SNAPSHOT = <html>You have chosen to delete the Snasphot.All the data <br>\ related to this Snapshot will be lost.<br><br>\ Are you sure you want to delete the Snapshot?</html> CREATE_SNAPSHOT_TITLE = Create Snapshot CONFIRM_CREATE_SNAPSHOT = <html>You have chosen to Create a Snapshot. This operation<br>\ will delete the Oldest Snapshot.<br><br>\ Are you sure you want to delete the Snapshot?</html> NO_REP_SPACE=<html>You have reached NO_REP_SPACE_1=of snapshot repository. Please take back up<br>\ of your snapshot base data to avoid data loss or delete the oldest<br>\ snapshot to get free capacity.</html> RUNNING_OUT_OF_SPACE_TITLE=Runing Out Of Space NO_VIEW_SPACE_1=of View Spcae in snapshot repository. Please take back up<br>\ of your View data to avoid data loss.</html> SNAPSHOT_DISABLED_TITLE=Snapshots Disabled. NO_SPACE=<html>Snapshots are Non-operational since there is no space in<br>\ the repository. Please disable the Snapshots on the VD.</html> LABEL_AVAILABLE_CAPACITY=(A)vailable Capacity CREATE_SNAPSHOT_NOTE = <html><b>Note: </b>This will create a snapshot in the snapshot <br>\ time line. Once it is reached the maximum supported <br>\ count, Create snapshot button will be disabled.</html> SNAP_BASE_DETAILS = Snapshot Base Details DELETE_SNAPSHOT_NOTES = <html><b>Note: </b>Only oldest snapshot <br> information can be deleted</html> #TG end #SSD-SSC SSC_DRIVEGROUP=CacheCade\u2122 Drive Group OPERATION_CREATE_SSCD = Cr(e)ate CacheCade\u2122 SSC_HOLE_UNCONFIGPD_SELECTION_PAGE_TITLE = Create CacheCade\u2122 - Allocate capacity SSC_DESC_WHERE_T0_CREATE = Where do you want to create the new CacheCade\u2122? SSC_LABEL_USE_FREE_DRIVES = Use (u)nconfigured SSD drives(create new CacheCade\u2122 drive group) SSC_DRIVE_GROUP_SELECTION_PAGE_TITLE = Create CacheCade\u2122 Drive group SSC_LABEL_SELECT_UG_DRIVES = Select (u)nconfigured SSD drives: SSC_LABEL_DRIVE_GROUPS = CacheCade\u2122 Drive (g)roups: SSC_BUTTON_CREATE_DG = (C)reate CacheCade\u2122 Drive Group SSC_ADVANCED_VD_CREATION_TITLE = Create CacheCade\u2122 Virtual Drive SSC_LABEL_SPECIFY_PARAMS = Specify parameters for the new CacheCade\u2122 Virtual Drive. LABEL_SSCD_NAME= Cac(h)eCade\u2122 VD name: SSCD_CREATE = (C)reate SSCD_UPDATE = (U)pdate SSCD_REMOVE = (R)emove SSC_CREATE_VD_CONFIG_SUMMARY_TITLE = Create CacheCade\u2122 - Summary SSC_CONFIG_SUMMARY_DESC = Review the summary and go back if you need to make corrections. The CacheCade\u2122 Virtual Drive(s) \ will be created when you click finish. SSC_CONFIG_SUCCESS_TITLE = Create CacheCade\u2122 - Complete SSC_CONFIG_SUCCESS_MSG = The CacheCade\u2122 Virtual Drive(s) were successfully created. SSC_SUMMARY_TEXT_DG_NAME = CacheCade\u2122 Drive group name: SSC_SUMMARY_TEXT_VD_NAME = CacheCade\u2122 Virtual Drive {0} name: TITLE_SELECT_RAID_LEVEL_AND_ENCRYTION = RAID and Encryption SSC_GROUP_IMAGE = sscds_group.png SSCD_VD_IMAGE = sscd_vd.png SSCD_MAPPED_VD = sscdmapedvd.png SSCD_TEXT = CacheCade\u2122 Virtual Drive CACHECADE_TEXT = CacheCade\u2122 PROPERTY_SSCDSTATE_TEXT = CacheCade\u2122 VD State MSG_DELETESSCD_TEXT1 = <html>You have chosen to delete CacheCade\u2122 Virtual Drive MSG_DELETESSCD_TEXT2 = All data<br> on the CacheCade\u2122 Virtual Drive will be lost MSG_DELETESSCD_TEXT3 = and the preserved<br> cache for this CacheCade\u2122 Virtual Drive will be discarded MSG_DELETESSCD_TEXT4 = Are you sure you want to delete CacheCade\u2122 Virtual Drive MSG_DELETESSCD_CONFIRM_TITLE = Delete CacheCade\u2122 Virtual Drive - Confirmation SSCD_DRIVE_GROUP_TEXT = CacheCade\u2122 Drive Group # TG CR -9130 : SSD-SSC TITLE_MAP_VIRTUAL_DRIVE = Create CacheCade\u2122 - Mapping Virual Drives MAP_VIRTUAL_DRIVE_DESC = Description to map virtual drive to CacheCade\u2122 Virtual Drive. LABEL_SELECT_LOGICAL_DRIVES = (S)elect Logical Drives BUTTON_MAP = (M)ap BUTTON_UNMAP = (U)nMap OPERATION_MAP_VDS_TO_SSCD = (M)ap VDs To CacheCade\u2122 Virtual Drive RECONFIG_SSC_MENU = (M)odify CacheCade\u2122 Drive Group ADD_SSDS_DESC = Use the below table to add the SSD(s) and click next to proceed LABEL_SELECT_UG_SSD_ADD = Select the SSD to (a)dd REMOVE_SSDS_DESC = Use the below table to remove the SSD(s) and click next to proceed LABEL_SELECT_UG_SSD_REMOVE = Select the SSD to remo(v)e CHOOSE_MODE_DESC = To modify the CacheCade\u2122 Drive Group you can either Add drives or Remove drives. SUMMARY_TEXT_SSC_NAME = CacheCade\u2122 Drive Group name SUMMARY_TEXT_SSCD_NAME = CacheCade\u2122 VD name: MODIFY_SSC_CONFIRM_TITLE = Modify CacheCade\u2122 Drive Group - Confirmation TITLE_ADD_SSDS=Modify CacheCade\u2122 Drive Group - Add drive(s) to the current configuration LABEL_SSC=CacheCade\u2122 Drive Group TITLE_MODIFY_SSC_SUMMARY=Modify CacheCade\u2122 Drive Group - Summary Page TITLE_REMOVE_SSDS=Modify CacheCade\u2122 Drive Group - Remove drive(s) from the current configuration TITLE_SSC_RECONFIG_MODE_SELECTION=Modify CacheCade\u2122 Drive Group - Choose the operation ##################################################################### # START - TG - Drive Group and Virtual Drive Expansion # ##################################################################### TITLE_EXPAND_SSCD = Expand CacheCade\u2122 Virtual Drive EXPAND_SSCD_DESC = <html>Use the default percentage value to occupy the remaining capacity in the \ CacheCade\u2122 Drive Group or<br>change the percentage if needed. The CacheCade\u2122 Virtual Drive expansion \ may also expand the<br>CacheCade\u2122 Drive Group if necessary.<br><br>The expansion will occur \ when you click OK. On click of cancel will terminate this<br>operation.<br><br></html> LABEL_NEW_SSCD_SIZE = <html><b>Capacity of the CacheCade\u2122 Virtual Drive after expansion: {0}</b></html> ################################################################# # END - TG - Drive Group and Virtual Drive Expansion # ################################################################# ################################################################# # Aphrodite Changes START # ################################################################# HOSTVIEW_SCREEN_TITLE= Host View HOSTVIEW_DESC=<html><br> This page displays all the servers that were discovered.\ Choose a server and click on Login to start managing that server.<br>You \ will be prompted for entering host credentials while logging in.<br><br>\ Use Configure Host to configure the hosts that you want to view. <br></html> BUTTON_DISCOVER_HOSTS_TEXT= (D)iscover Host LABEL_IPADDRESS_TEXT=(I)P Address: BUTTON_STOP_DISCOVERY_TEXT= S(t)op Discovery BUTTON_CONFIGURE_HOSTS_TEXT=(C)onfigure Host... RADIO_LOCAL_DISPLAY_TEXT =(D)isplay only the local server. RADIO_LOCAL_DISPLAY_DESC=<html>This will display only the local server in the host view screen.\ This setting will not stop the disocvery process of the remote MSM servers.<br></html> RADIO_FAVORITE_DISPLAY_TEXT = D(i)splay the systems from the following favorite list: RADIO_FAVORITE_DISPLAY_DESC=<html>This option allows the user to list only the selected MSM servers in the host view screen.<br></html> LABEL_FAVORITE_IP=(F)avorite list: TEXT_FAVORITE_IP=(E)nter IP Address: RADIO_NW_DISPLAY_TEXT =Dis(p)lay all the systems in the network of local server. RADIO_NW_DISPLAY_DESC=<html>This option allows MSM server to start the discovery process of all the available \ MSM remote servers in the subnet of the mentioned <br> MSM server in the host view screen.<html> RADIO_NCP_DISPLAY_TEXT =St(o)p discovery process of remote servers. RADIO_NCP_DISPLAY_DESC=<html>Use this check box to manage the remote server discovery process at the local MSM server \ <html> PANEL_DISPLAY_TITLE = Display preferences PANEL_DISCOVER_TITLE = Server Discovery Setting DIALOG_HOST_CONFIGURE_TITLE = Configure Host LABEL_DISCOVERY_DESC=<html>Use this check box to manage the remote server discovery process at the local MSM server <html> BUTTON_ADD=(A)dd BUTTON_SAVE_SETTINGS=(S)ave Settings LOGIN_TIP=<html>Use your Operating System's login username <br>and password to login the MSM server</html> DIALOG_TIPS_TO_LOGIN=<html><br>Please use your selected server's Operating System's username and password to login.<br>\ <ul><li>For full access to the server please use admin privilege on the server.<br> e.g. Administrator \ or users belong to Administrator Group under Windows <br>and root or users belong to root group under non-Windows \ platform.</li><li>For view only access to the server please use your system's username and<br> password for windows and \ non-windows platform.</li></ul>If you need access to the server or misplaced your password,please contact your <br>\ System Administrator to obtain \ login credentials.<br></html> DIALOG_TIPS_TO_LOGIN_TITLE=Tips To Login ICON_SPIN_PROGRESS=transitioning_icon.gif SERVERIMAGE=ServerTool.png REFRESHIMAGE=Refresh.png PROGRESSIMAGE=Progress.png CREATEVDIMAGE=CreateVD.png SEPARATORIMAGE=Start.png EXITIMAGE=exit.png HELPIMAGE=Help.png TIPIMAGE=Help16.png ADDACTION=action_add.gif IP_ADDR_TITLE=Select IP Address IP_ADDR_MSG=<html>Select IP Address(es) from the above list to remove</html> DISCOVERY_STATUS_INPROGRESS=<html> Discovery is in progress...</html> DISCOVERY_STATUS_COMPLETE = Server(s) found. Discovery completed. DISCOVERY_STATUS_STOP = Server(s) found. Discovery stopped. DISCOVERY_STATUS_STOPPING = Stopping the discovery... CONFIRMATION_MSG=Do you want to apply the display changes now? FAILURE_DISCOVERY=<html>Servers could not be \ found because server may be down or server not installed in the host system<br></html> IP_ADDRESS_TITLE=Enter IP Address IP_ADDRESS_MSG=<html>You cannot leave this field blank.Enter a valid IP address to proceed.</html> VALID_IP_ADDRESS_TITLE=Enter Valid IP Address VALID_IP_ADDRESS_MSG=<html>IP Address that you have entered is not valid.Please enter a valid <br>IP address to proceed.</html> FAV_LIST_EMPTY_MSG=<html>Favourite list is empty. Please enter a valid IP address to proceed.</html> REMOTE_SERVER_TITLE=Remote (s)ervers: NO_DATA_AVAILABLE_TEXT=No data available ################################################################# # 09M12 CR Changes START # ################################################################# # Dimmer Switch 2.5 TITLE_DRIVE_GROUP_POWER_SAVINGS = Power Save Settings BUTTON_POWER_SAVINGS_LEVEL_NONE = (N)o power saving TOOLTIP_POWER_SAVINGS_LEVEL_NONE = No power saving BUTTON_POWER_SAVINGS_LEVEL_MAX = (M)aximum power saving TOOLTIP_POWER_SAVINGS_LEVEL_MAX = Maximum power saving POWER_SAVINGS_INTRO_DESC = <html>Choose the power save mode. The power save setting will affect all the virtual<br>\ drives under the selected drive group.<br<br></html> POWER_SAVINGS_LEVEL_NONE_DESC = <html>This option ensures that power savings are disabled for the virtual dives which <br>\ are part of the drive group. The drives shall always remain in active state.<br></html> POWER_SAVINGS_LEVEL_MAX_DESC = <html>This option ensures that power savings are enabled for the virtual dives <br>\ which are part of the drive group.This setting will completely spin down <br>\ configured drives.<br<br></html> POWER_SAVE_SETTINGS_MENU = (P)ower Save Settings #TG CR 8499 - EKMS EKM_SUPPORTED_ENABLE_DRIVE_SECURITY_INTRO_DESC = <html>Enabling drive security will allow you to create secure virtual drives using a security key on this controller.<br><br>\ Choose the security key management mode:<br><br></html> EKM_SUPPORTED_CHANGE_DRIVE_SECURITY_INTRO_DESC = <html>Drive security is currently enabled. Change the drive security settings on this controller or switch<br>\ between the key management modes. CURRENT_DRIVE_SECURITY_MODE = Current drive security mode: CHANGE_CURRENT_SECURITY_SETTINGS = (C)hange current security settings TOOLTIP_CURRENT_SECURITY_SETTINGS = Change current security settings SWITCH_TO_EKM = (S)witch to EKM SWITCH_TO_LKM = (S)witch to LKM TOOLTIP_SWITCH_TO_EKM = Switch to EKM TOOLTIP_SWITCH_TO_LKM = Switch to LKM BUTTON_EKMS = (E)xternal key manager server(EKMS) BUTTON_LKM = (L)ocal key management(LKM) EKMS_DESC = <html>EKM provides key management support via an External Key Manager Server (EKMS).It automates and manages the life cycle<br>\ of keys, as well as the task of unlocking configurations. It is prefered when there are large number of systems deployed.<br><br></html> LKM_DESC = <html>LKM provides key management support via controller itself.<br><br></html> TOOLTIP_EKMS = External key manager server TOOLTIP_LKM = Local key management TITLE_CHOOSE_DRIVE_SECURITY_MODE = Drive Security Choose Mode TITLE_CHANGE_SECURITY_SETTINGS = Change Security Settings LABEL_CURRENT_SECURITY_KEY_IDENTIFIER1 = (C)urrent pass phrase identifier: TITLE_REBOOT = System Restart Required REBOOT_REQUIRED_DESC = <html>Please restart the system for the changes to take effect. Make sure to <br>\ stop all the I/Os and other operations before you reboot your system.<br><br></html> REBOOT_REQUIRED_TO_IMPORT_DESC = <html>One or more EKM secured foreign drives are locked. <br><br>\ In order to import the drives, you must restart your system.Until<br>\ then all secured virtual will be locked. <br><br></html> TITLE_ERROR_STATUS = Error Status TITLE_CONFIRM_EKM_MODE_ENABLED = Confirm EKM Mode Enabled CONFIRM_EKM_MODE_ENABLED_DESC = <br><br>Drive security is enabled on this controller using External Key<br>\ Management (EKM) mode.<br><br></html> OPTIONAL_PASSPHRASE_REQUIRED_DESC = <html>Your controller currently has an optional pass phrase for additional security.<br>\ Please enter the pass phrase to proceed.<br><br></html> TITLE_CHANGE_SECURITY_SETTINGS_OPTIONAL_PASSPHRASE = change Security Settings - Optional Passphrase TITLE_CHANGE_SECURITY_SETTINGS_SWITCH_MODE = change Security Settings - Switch Mode TITLE_CONFIRM_CHANGE_SECURITY_SETTINGS = Confirm Change Security Settings CONFIRM_CHANGE_SECURITY_SETTINGS_DESC = <html>Are you sure you want to change the security settings?<br><br></html> CONFIRM_SWITCH_TO_EKM_DESC = <html>Are you sure you want to switch to EKM mode?<br><br></html> TITLE_UNABLE_TO_SWITCH_MODE = Unable To Switch Mode UNABLE_TO_SWITCH_MODE_DESC = Secured configuration along with security key per drive is present.<br>\ Please clear the secured configuration to switch the mode.<br><br></html> TITLE_SWITCH_TO_EKM_TO_IMPORT = Switch to EKM Mode SWITCH_TO_EKM_TO_IMPORT_DESC = <html>One or more drives are secured using EKM mode. <br><br>\ In order to import the drives, you must switch to EKM mode.<br><br></html> AUTHENTICATE_DESC = Please provide the current drive security key for authentication. TEXT_EKM = EKM TEXT_LKM = LKM TEXT_NOT_APPLICABLE = N/A TITLE_ENTER_KEY_ID = Enter Security Key Identifier ENTER_KEY_ID_DESC = <html>The security key identifier field cannot be blank. Please enter a security key identifier<br> to proceed further.<br><br></html> # MUI Support AVAILABLE_CAPACITY_TEXT=Available Capacity WASTAGE_OF_SPACE=The system has detected drives of different size. This will lead to wastage of space in one or more drives. DRIVETYPE_MIXING=Drive type mixing: NO_OF_VDRIVES=Number of virtual drives: CAPACITY_OF_EACH_VD=Capacity of each virtual drive: DRIVE_SECURITY_TEXT=Drive security: FREE_CAP_NODE=Free Capacity Node CAP_REQUIRED_TEXT=Capacity required MENU_EXPANDSSCD=(E)xpand CacheCade\u2122 Virtual Drive PROPERTY_SSCD_NAME_TEXT=CacheCade\u2122 Name TEXT_AUTOMATIC=Automatic MSG_CURRENT_FW_VERSION=Current firmware version: MSG_CURRENT_FW_VERSION_REPLACEWITH=Warning: The current firmware version will be replaced with the selected firmware! SUPER_SZD_CACHE=CacheCade\u2122 TEXT_POSSIBLE=Possible TEXT_NOT_POSSIBLE=Not Possible PROP_ASSOCIATE_VD=<html><b>Associated Virtual Drive(s):</b></html> #Dashboard DASHBOARD_TAB_TEXT = Dashboard PROPERTIES_TEXT = Properties USAGE_TEXT = Usage BACKGROUND_OPERATIONS_TEXT = Background Operations FEATURES_TEXT = Features PREMIUM_FEATURES_TEXT= PremiumFeatures ACTIONS_TEXT = Actions HELP_TEXT = Help STATUS_TEXT = Status: ENCLOSURES_TEXT = Enclosures: BACKPLANES_TEXT = Backplanes: DRIVES_TEXT = Drives: DRIVE_GROUPS_TEXT = Drive groups: VIRTUAL_DRIVES_TEXT = Virtual drives: SERVER_PROFILE_TEXT = View server profile STATUS_DEGRADED = Degraded STATUS_FAILED = Failed STATUS_NEEDS_ATTENTION = Needs attention STATUS_OPTIMAL = Optimal TOTAL_CAPACITY_TEXT = Total capacity: CONFIGURED_CAPACITY_TEXT = Configured Capacity: UNCONFIGURED_CAPACITY_TEXT = Unconfigured Capacity: DARKBLUE_ICON = darkbluepattern.png LIGHTBLUE_ICON = lightbluepattern.png VDOP_PROGRESS_TEXT = (V)irtual drive operations in progress PDOP_PROGRESS_TEXT = (D)rive operations in progress COMPLETED_TEXT = Completed ALARM_TEXT = Alarm: MEGARAID_RECOVERY_TEXT = MegaRAID recovery: SUPER_SIZED_CACHE_TEXT = CacheCade\u2122: DRIVE_SECURITY_TEXT = Drive security: UNCONFGOOD_SPIN_DOWN_TEXT = Unconfigured good spin down: HSP_SPIN_DOWN_TEXT = Hot spare spin down: CLUSTER_TEXT = Cluster: MORE_DETAILS_TEXT = More details USE_MSM_TEXT = How to use MSM? CREATE_VIRTUAL_DRIVE_TEXT = How to create virtual drive? ENABLE_PREMIUM_FEATURE_TEXT = How to enable premium feature? GLOSSARY_TEXT = Glossary NEEDS_ATTENTION_ICON = NeedAtten.png OPTIMAL_ICON = Optimal.png DASHBOARD_CONFIRMATION_TITLE = Dashboard - Confirmation DASHBOARD_LOGOFF_MESSAGE = Are you sure you want to log off? WELCOME_LABEL = Welcome: LOGOFF_LABEL = Log Off ACTION_CREATE_VD = Create virtual drive ACTION_CREATE_SSCD = Create CacheCade\u2122 ACTION_LOAD_CONFIG = Load configuration ACTION_UPDATE_FIRMWARE = Update firmware ACTION_SILENCE_ALARM = Silence alarm SERVER_IP = Server IP: SERVER_NAME = Server Name: OS_NAME = OS name: OS_VERSION = OS Version: OS_ARCH = OS Architechture: DRIVER_NAME = Driver Name: DRIVER_VERSION = Driver Version: APP_VER = Application Version: HARDWARE_TEXT = HARDWARE--- FW_PACKAGE_VER = Firmware Package Version: FW_VER = Firmware Version: SAS_ADDRESS = SAS Address: BBU_TEXT = BBU: ENCL_TEXT = Enclosure(s): DRIVE_TEXT = Drive(s): VIRTUAL_DRIVES_TEXT = Virtual Drive(s): BBU_HEAD = BBU--- BBU_TYPE = BBU Type: BBU_STATUS = BBU Status: ENCL_HEAD_TEXT = Enclosures--- PROD_NAME = PRODUCT NAME TYPE_TEXT = TYPE STATUS_HEAD = STATUS DRIVES_HEAD = Drives--- CONNECTOR_HEAD = CONNECTOR PROD_HEAD = PRODUCT ID VENDOR_ID_HEAD = VENDOR ID STATE_HEAD = STATE DISK_TYPE_HEAD = DISK TYPE CAPACITY_HEAD = CAPACITY POWER_STATE_HEAD = POWER STATE OPERATION_PROG_HEAD = OPERATION PROGRESS COPYBACK_TEXT = Copyback REBUILD_TEXT = Rebuild VIRTUAL_DRIVES_TEXT_HEAD = Virtual Drives--- TARGET_ID_HEAD = TARGET ID NAME_HEAD = NAME RAID_LEVEL_HEAD = RAID LEVEL SNAPSHOT_STATE_HEAD = SNAPSHOT STATE CONSISTENCY_CHECK_TEXT = Consistency Check RECONSTRUCTION_TEXT = Reconstruction INITIALIZATION_TEXT = Initialization FIND_NEXT = Find (N)ext SERVER_PROFILE = (S)erver Profile: FIND_WHAT = (F)ind What: RESULTS_TEXT = Results : SAVE_AS_TEXT = S(a)ve As... CLOSE_TEXT = (C)lose SER_PRO = Server Profile MEGARAID_MSG = Application has finished searching the page. FIND_TITLE = Find PROFILE_SUMMARY = Profile_Summary_ PROFIEL_SUMM_GENERATED = Profile Summary - Generated on ENCL_TYPE_UNKNOWN = Unknown ENCL_TYPE_SAFTE = Safte ENCL_TYPE_SES = Ses ENCL_TYPE_SGPIO = Sgpio ENCL_FAULTY = Faulty ENCL_OK = OK TEXT_YES = YES TEXT_NO = NO BBU_DEGRADED = Degraded BBU_FAILED = Failed BBU_HEALTHY = Healthy BBU_NEED_ATTENTION = Need Attention MEGARAID_RECOVERY_TEXT = MegaRAID RECOVERY MSG_DATA_BACKUP_AND_NO_RESTART = <html>Please note that rebooting virtual drives containing boot partitions that are<br>\ undergoing RAID level migration or capacity expansion operations may<br>\ lead to undesirable boot process behavior. It is advised that these<br>\ operations complete in their entirety before the system is restarted.<br><br>\ It is advisable to backup your data before you proceed.<br><br></html> #FanSpeed - LSIP200036675 PROPERTY_FAN_SPEED_TEXT=Speed PROPERTY_FAN_SPEED_UNIT=RPM SES_SPEED_CODE_LOWEST_SPEED=Lowest Speed SES_SPEED_CODE_SECOND_LOWEST_SPEED=Second Lowest Speed SES_SPEED_CODE_THIRD_LOWEST_SPEED=Third Lowest Speed SES_SPEED_CODE_INTERMEDIATE_SPEED=Intermediate Speed SES_SPEED_CODE_THIRD_HIGHEST_SPEED=Third Highest Speed SES_SPEED_CODE_SECOND_HIGHEST_SPEED=Second Highest Speed SES_SPEED_CODE_HIGHEST_SPEED=Highest Speed LABEL_TEMPERATURE_SENSOR=Temperature Sensor LABEL_VOLTAGE_SENSOR_TEXT=Voltage Sensor #FIX=FIX #SSD-SSC FIX=FIX # TG CR -9130 : SSD-SSC FIX=FIX ##################################################################### # START - TG - Drive Group and Virtual Drive Expansion FIX=FIX# ##################################################################### ################################################################# # END - TG - Drive Group and Virtual Drive Expansion # ################################################################# ################################################################# # Aphrodite Changes START FIX=FIX # ################################################################# ################################################################# # 09M12 CR Changes START FIX=FIX # ################################################################# #MEDUSA 8361 PROPERTY_EXPFWVERSION_TEXT = Expander Firmware Version LABEL_SELECT_CAPACITY=S(e)lect Capacity MSG_SAME_SERVER_LOGIN=<html>You are trying to connect to the same server, which is currently being used. <br>\ Are you sure you want to continue?<br><br>\ Note: This will close the current session and will open a new one.</html> MSG_DIFF_SERVER_LOGIN=<html>If you choose to connect to the server {0}, the existing connection <br>\ to the server {1} will be disconnected. <br><br> Are you sure you want to continue?</html> ################################################################# # PFKey <Start> # ################################################################# PFKEY_VIEW_TEXT=<html>A premium feature is a special function that may not be available in the standard configuration of the controller.<br>\ </html> PFKEY_BENEFITS_HELP=<html><a href=>Benefits of each premium feature</a></html> PFKEY_VIEW_HELP=<html><a href=>How do I manage Premium features</a></html> PFKEY_TITLE=Manag(e) Premium Features PFKEY_FEATURES_HEADING=Activated (p)remium features: PFKEY_FEATURES_DES=<html>You will be prompted to provide the below feature enable identifier and controller serial number on the <a href="">external site </a> <br>\ in order to obtain the license and feature key.</html> ENABLE_BUTTON=(A)ctivate... DEACTIVATE_BUTTON=(D)eactivate All Trial Features... PFKEY_TIPS_LINK=<html><a href=>Tips to activate premium features</a></html> SAFE_ID_LABEL=(F)eature enable identifier: SAFE_ID_NOTE=<html><b>Note:</b> You can highlight the identifier and serial number and copy it to the clipboard.</html> FEATURE_HEADING=Feature PFKEY_LOCATION=Mode PFKEY_LICENSE_VALIDITY=License PFKEY_ACTIVATION_DESC=<html>To activate any premium feature on your controller, you must first obtain a license and <br>\ then a feature key <a href="">from here</a>. If you have a feature key please furnish below. <br><br>\ Choose how do you want to activate premium features.</html> PFKEY_ACTIVATION_XML_TEXT=(S)elect a feature key XML file: PFKEY_ACTIVATION_KEY_TEXT=(E)nter a feature key: PFKEY_FEATURE=(F)eature Key: FILE_PATH=File (p)ath: PFKEY_LICENSE=(L)icense: PFKEY_SUMMARY_DESC=<html>Review the summary and go back if you need to make corrections.<br>\ The premium features will be enabled when you click Finish.</html> PFKEY_TRIAL_SUM_DESC=<html>Review the summary and go back if you need to make corrections.<b>The trial \ key will be deactivated <br> and all the features associated to it will \ be disabled</b>.The premium features will be enabled when <br> you click Finish.</html> PFKEY_TRIAL_SUM_DESC1=<html>Review the summary and go back if you need to make corrections.<font color=red>The trial \ key will be <br> deactivated and all the features associated to it will \ be disabled</font>. <br> The premium features will be enabled when you click Finish.</html> PFKEY_TRIAL_TEXT=The trial feature validity period expires in 30 days. PFKEY_KEYVAULT_WARNING=<html><font color=red>Warning:</font>In case of controller failure you \ may not be able to transfer the premium features since they <br>\ are not protected by key vault.</html> CURRENT_SUMMARY=Current Summary POST_SUMMARY=Post Activation Summary DEACTIVATE_TRIAL_FEATURES_DESC=<html> The following trial features will be deactivated.<br><br>\ </html> DEACTIVATE_TRIAL_FEATURES_CONF=<html>Are you sure you want to deactivate?</html> SECURE_FEATURES_DESC=<html> The following premium features are not secured in the key vault.\ <b>Please secure to avoid <br>loosing them.If you have any unused feature keys,\ make sure you activate all of <br> them first.All non-activated feature keys \ will stop working after this operation. </b><br>\</html> SECURE_FEATURES_DESC1=<html> The following premium features are not secured in the key vault.\ <font color=red>Please secure to avoid <br>loosing them.If you have any unused feature keys,\ make sure you activate all of <br> them first.All non-activated feature keys \ will stop working after this operation. </font><br>\</html> SECURE_FEATURES_WIZ_DESC=<html> The following premium features will be secured as part of the re-hosting process.\ <b><br>If you have any unused feature keys,\ make sure you activate all of them <br>first.All non-activated feature keys \ will stop working after this operation. </b><br>\ Click finish to continue.</html> SECURE_FEATURES_WIZ_DESC1=<html> The following premium features will be secured as part of the re-hosting process.\ <font color=red><br>If you have any unused feature keys,\ make sure you activate all of them first.<br>All non-activated feature keys \ will stop working after this operation. </font><br>\ Click finish to continue.</html> SECURE_FEATURES_CONF=<html>Do you want to secure these premium feature keys now?</b><html> FEATURE_HEADING1=(P)remium features: ADAPTER_OPERATION_PFKEY=Activate Premium Features SECURE_KEY_TOOLTIP=What is secure premium feature. CONFIRMATION_DEACTIVATE_TRIAL=Deactivate All Trial Features - Confirmation CONFIRMATION_SECURE_FEATURE=Secure Premium Feature - Confirmation SECURE_STR=Secured NON_SECURE_STR=Not secured FACTORY_INSTALLED_STR=Factory installed UNLIMITED_STR=Unlimited DEACTIVE_STR=Feature will deactivate on restart TRIAL_EXPIRED_STR=Trial feature - Expired TRIAL_STR1=Trial feature - {0} day(s) and {1} hour(s) left TRIAL_STR2=Trial feature - {0} day(s) left TRIAL_STR3=Trial feature - {0} hour(s) left TRIAL_STR4=Trial feature - {0} minute(s) left PFK_CHOOSE_MODE_TITLE=Activate Premium Feature Key - Choose Method PFK_SUMMARY_TITLE= Activate Premium Feature - Summary WRONG_PFK_MSG=<html>The activation key entered does not match with the controller.<br><br>\ Please re-enter the correct activation key and proceed.</html> WRONG_PFK_TITLE=Activation Key Mismatch INVALID_PFK_TITLE=Invalid Activation Key INVALID_PFK_MSG=<html>The activation key entered is invalid.Please enter a valid activation <br>\ key to proceed.</html> INVALID_SEQ_TITLE=Features Already Transferred INVALID_SEQ_MSG=<html>Features are already activated for this activation key and transferred <br>\ to the keyvault.</html> RESTART_MSG=<html>Please restart the system for the changes to take effect. Make sure <br>\ to stop all the I\Os and the other operations before you restart your <br>\ system.</html> RESTART_TITLE=System Restart Required XML_TOOLTIP=How can I get a feature key XML file? SECURE_TOOL_TIP=What is secure premium feature? WRONG_PFK_XML_MSG=<html>The xml file you have provided is incorrect.In order to activate the <br>\ premium feature, you must upload the proper feature key xml file.</html> WRONG_PFK_XML_TITLE=Incorrect Feature Key XML File ACTIV_WARNING_TITLE=Activate Premium Feature - Confirmation CTRL_SERIAL_NO=Controller (s)erial number: CONFIG_KEY_VAULT=Configure Key (V)ault... REHOST_DESC=<html>To transfer features from one controller to another controller you need to complete \ the re-hosting process.<br><b>Only then you will be able to secure the premium feature in the \ key vault.</b><br><br>The wizard helps you to configure key vault by tranferring premium features \ from one controller to another <br>controller and secure them in the keyvault.<br><br>\ Please furnish the below details in the <a href="">external site </a> in order to complete the re-hosting \ process.If you have <br>already \ completed the process then select the checkbox below and proceed with next.<br></html> REHOST_DESC1=<html>To transfer features from one controller to another controller you needto complete \ the re-hosting process.<br><font color=red>Only then you will be able to secure the premium feature in the \ key vault.</font><br><br>The wizard helps you to configure key vault by tranferring premium features \ from one controller to another <br>controller and secure them in the keyvault.<br><br>\ Please furnish the below details in the <a href="">external site </a>in order to complete the re-hosting \ process.If you have <br>already \ completed the process then select the checkbox below and proceed with next.<br></html> REHOST_ONLY_DESC=<html>To transfer features from one controller to another controller you need to complete \ the re-hosting process.<br><b>Only then you will be able to secure the premium feature in the \ key vault.</b><br><br>Please furnish the below details in the <a href="">external site </a>in order to complete the re-hosting \ process.If you have <br>already \ completed the process thsen select the checkbox below and proceed with yes button.<br></html> REHOST_ONLY_DESC1=<html>To transfer features from one controller to another controller you need to complete \ the re-hosting process.<br><font color=red>Only then you will be able to secure the premium feature in the \ key vault.</font><br><br>Please furnish the below details in the <a href="">external site </a>in order to complete the re-hosting \ process.If you have <br>already \ completed the process then select the checkbox below and proceed with yes button.<br></html> CONFIG_KEY_TITLE=Configure Key Vault - Confirm Re-hosting Process CONFIG_SECURE_TITLE=Configure Key Vault - Secure Premium Features REHOST_TITLE=Re-hosting Process - Confirm KEY_VAULT_ID=(O)ld serial number: NEW_CTRL_SERIAL_NO=N(e)w serial number: REHOST_NOTE=<html><b>Note:</b>You can highlight the old,new serial number and feature enable \ identifier and copy it to the clipboard.</html> REHOST_CONFIRM=(I) acknowledge that I have completed the re-hosting process in the external site. UNSUPPORTED_STR=Unsupported REHOST_WARNING_TITLE=Configure Key Vault - Confirmation ################################################################# # PFKey <End> # ################################################################# ###############SNAPSHOT1.1 Narendra############################### LDDRIVE_OPERATION_MANAGE_SNAPSHOT=(M)anage Snapshots LDRIVE_OPERATION_MANAGE_SNAPSHOT_DESC=Manages Snapshots on set of VDs. LDRIVE_OPERATION_MANAGE_SNAPSHOT_TITLE=Manage Snapshots MANAGE_SNAPSHOT_COLUMN_NAME1_TEXT=Name MANAGE_SNAPSHOT_COLUMN_NAME2_TEXT=Creation time MANAGE_SNAPSHOT_COLUMN_NAME3_TEXT=Status MANAGE_SNAPSHOT_COLUMN_NAME4_TEXT=Capacity used MANAGE_SNAPSHOT_TABLE_LABEL=(S)napshots: DELETE_SNAPSHOT_BUTTON_TEXT=(D)elete Snapshot CREATE_SNAPSHOT_BUTTON_TEXT=C(r)eate Snapshot EDIT_SNAPSHOT_SCHEDULE_BUTTON_TEXT=(E)dit Schedule MANAGE_SNAPSHOT_VIEW_TEXT=View Details ADVANCED_SNAPSHOT_BUTTON_TEXT=(A)dvanced LDRIVE_OPERATION_CREATE_SNAPSHOT_SINGLE_TITLE=Create Snapshot LDDRIVE_OPERATION_SNAPSHOT_NAME_TEXT=(S)napshot name: ROLLBACK_TEXT=Rolling back CANNOT_DELETE_SNAPSHOT_TITLE=Cannot Delete Snapshot CANNOT_DELETE_SNAPSHOT_TEXT=is not the oldest snapshot. Before you can delete<br>\ this snapshot, you must first delete all older snapshots.<br></html> NO_VIEW_LABEL_TEXT=There is no view for CREATE_VIEW_TEXT=Crea(t)e View DELETE_VIEW_LABEL_TEXT=In order to create a view, you must delete the view for CREATE_VIEW_DESC_TEXT=<html>Specify the capacity to allocate for writes to the view. The<br>\ capacity for writes comes from available capacity on the <br>\ snapshot repository,<br></html> VIEW_NAME_LABEL_TEXT=(V)iew Name WRITE_CAPACITY_TEXT=(W)rite capacity: LDRIVE_OPERATION_EDITSCHEDULE_SNAPSHOT_TITLE=Edit Schedule FREQUENCY=(F)requency: EVERY_TEXT=(E)very: DAYS_TEXT=Da(y): TIME_TEXT=(T)ime: DAILY=Daily WEEKLY=Weekly MONTHLY=Monthly DAY_TEXT=Da(y): DAY_OF_MONTH=Day of the (m)onth: DAY_OF_WEEK=Day of the (w)eek: MANAGE_SNAPSHOTSCHEDULE_TABLE_LABEL=(V)irtual drives on this schedule: CLOSE_SNAPSHOT_BUTTON_TEXT=(C)lose HELP_SNAPSHOT_BUTTON_TEXT=(H)elp CANNOT_CREATE_SNAPSHOT_TITLE=Cannot Create Snapshot CANNOT_CREATE_SNAPSHOT_TEXT=Max Snapshot limitation has been exceeded ################################################################# ########################### SNAPSHOT 1.1 -Nithesh################################ CREATE_CTS_DESC=Create concurrent snapshots across virtual drives by selecting the virtual drives. SNAPSHOT_NAME_TEXT=(S)napshot name: SELECT_BASE_VD_TEXT=(V)irtual drives: CHECK_BOX_TEXT_ALL=(A)ll SNAPSHOT_VD_SELECTION_MANDATORY_MESSAGE=<html>You have not selected any Virtual drives for Snapshot Creation.<br>\ Kindly select atleast one Virtual Drive.</html> SNAPSHOT_VD_SELECTION_MANDATORY=Snapshot Virtual Drive Selection LDRIVE_OPERATION_DISABLE_SNAPSHOT=Di(s)able MegaRAID Recovery LDRIVE_OPERATION_MANAGE_SNAPSHOTS=(M)anage Snapshots LDRIVE_OPERATION_MANAGE_SNAPSHOTS_DESC=Manage Snapshots LDRIVE_OPERATION_CREATE_SNAPSHOT=C(r)eate Snapshots LDRIVE_OPERATION_CREATE_SNAPSHOT_DESC=Creates Snapshots on set of VDs. LDRIVE_OPERATION_CREATE_SNAPSHOT_TITLE=Create Snapshots ADAPTER_OPERATION_MANAGE_SNAPSHOT_SCHEDULES=(M)anage Snapshot Schedules ADAPTER_OPERATION_MANAGE_SNAPSHOT_SCHEDULES_DESC=Manage Snapshot Schedules ENABLE_SNAPSHOT_DESC=<html>Select an existing virtual drive or create a new virtual drive to use as the snapshot repository,<br>\ which will hold the snapshot-related information for this virtual drive. The snapshot repository<br>\ should only be used for snapshot data.</html> ENABLE_SNAPSHOT_DESC_CONTINUED=<html>Specify the amount of capacity to allocate from the snapshot repository. Be careful to allocate<br>\ sufficient capacity because you cannot change it later without losing snapshot data.<br><br>\ Tips for allocating capacity:<br>\ - When allocating capacity, consider the expected percentage of data that will change between<br>\ snapshots times the number of snapshots retained (up to <num>).<br>\ - You may want to leave some available capacity on the snapshot repository for a future snapshot view.<br>\ The capacity for writes to a view must come from available capacity on the snapshot repository.</html> CREATE_VD_TEXT=(C)reate New.... ENABLE_SCHEDULE_DESC=Select an existing snapshot schedule or create a new one. ADD_TO_EXISTING_SCHEDULE=(A)dd virtual drive to existing schedule. TABLE_TEXT_FREQUENCY=Frequency TABLE_TEXT_NEXT_SNAP=Next Snapshot TABLE_TEXT_SCHEDULED_VDS=Scheduled Virtual Drives SET_SNAPSHOT_PROPERTIES_DESC=<html>Optionally, edit the advanced settings for automatic snapshots.<br><br>\ When at the snapshot limit:<br></html> AUTO_DELETE_OLD_SNAP=(A)utomatically delete the oldest snapshot STOP_SNAP=St(o)p taking snapshots AUTO_SNAP_ON_REBOOT=(T)ake a snapshot on every reboot(recommended for boot virtual drives) CREATE_NEW_SCHEDULE=(C)reate new schedule FREQUENCY=(F)requency: DAILY=Daily WEEKLY=Weekly MONTHLY=Monthly EVERY_TEXT=(E)very DAYS_TEXT=day(s) TIME_TEXT=(T)ime: DO_NOT_SCHEDULE=(D)o not schedule any automatic snapshots SCHEDULE_TEXT=(S)chedule: NO_SCHEDULE_TEXT=(V)irtual drives with no snapshot schedule: CLOSE_BUTTON_TEXT=(C)lose HELP_BUTTON_TEXT=(H)elp WEEKS_TEXT=week(s) DAY_TEXT=Da(y): MONTHS_TEXT=month(s) DAY_OF_MONTH=Day of the (m)onth: DAY_OF_WEEK=Day of the (w)eek: EDIT_SCHEDULE=(E)dit Schedule DELETE_BUTTON=De(l)ete ADD_TO_SCHEDULE_BUTTON=(A)dd to Schedule NEW_SCHEDULE_BUTTON=(N)ew Schedule CONFIRM_ENABLE_SNAPSHOT_NON_REP=<html>Once you enable snapshots on this virtual drive, you cannot change<br>\ the allocated capacity or the snapshot repository without<br>\ first disabling snapshots and losing any snapshot data.<br><br> CONFIRM_ENABLE_SNAPSHOT_REP=<html>Once you enable snapshots on this virtual drive, you cannot change<br>\ the allocated capacity or the snapshot repository without<br>\ first disabling snapshots and losing any snapshot data.<br><br>\ Are you sure you want to enable snapshots on Virtual Drive: CONFIRM_OS_DRIVE= <html>The virtual drive selected to be the snapshot repository contains an operating system.<br>\ The snapshot repository should be only used for snapshot data. Are you sure that you want <br>\ to use CONFIRM_OS_DRIVE_CONT=as your snapshot repository? PAUSE_BUTTON=(P)ause RESUME_TEXT=Resu(m)e MSG_SNAP_ENABLED_LD=<html>You cannot delete MSG_SNAP_ENABLED_CONT=because MegaRAID Recovery is currently<br>\ enabled. You must first disable MegaRAID Recovery.</html> SCHEDULE_MISSED_DESC=The following virtual drives missed one or more scheduled snapshots. SCHEDULED_SNAP_DIALOG_TITLE=Scheduled Snapshot Missed LAST_SNAP=Last Snapshot SNAP_MISSED_CONFIRMATION=Do you want to take a snapshot now? SNAP_MISSED_CONFIRMATION_YES=(Y)es, take a snapshot now and again at the next scheduled time. SNAP_MISSED_CONFIRMATION_NO=(N)o, do not take a snapshot now. Manually take a snapshot later or wait for the next scheduled time. NEXT_SNAP_TEXT=Next snapshot: NO_SCHED=None scheduled CREATEVIEW_DESC_TEXT=<html>Specify the capacity to allocate for writes to the view.<br>\ The capacity for writes comes from available capacity on the <br>\ snapshot repository, VIEW_NAME_LABEL=(V)iew name: VIEW_TEXT=view VIEW_WRITE_CAPACITY=(W)rite capacity: AVAILABLE_TEXT=available INVALID_FREQ=Invalid Frequency INVALID_FREQ_WARN=You cannot schedule a frequency of every CONFIRM_PAUSE_SCHEDULE_TEXT=All scheduled snapshots for the following virtual drives will be CONFIRM_PAUSE_SCHEDULE_TEXT_CONT_1= skipped until you choose to resume the schedule. CONFIRM_PAUSE_SCHEDULE_TEXT_CONT_2=Virtual drives: CONFIRM_PAUSE_SCHEDULE_TEXT_CONT_3=Are you sure that you want to pause the schedule? CONFIRM_PAUSE_SCHEDULE_TITLE=Confirm Pause Schedule RESUME_SCHEDULE_TEXT=The snapshot schedule has been resumed. The next RESUME_SCHEDULE_TEXT_CONT= scheduled snapshot will occur on SCHEDULE_RESUMED_TITLE=Snapshot Schedule Resumed CONFIRM_DELETE_SCHEDULE_TEXT=Are you sure that you want to delete the selected schedule? CONFIRM_DELETE_SCHEDULE_TITLE=Confirm Delete Schedule SELECT_SNAPSHOT_TEXT=Please select a Snapshot from the Snapshots List. *********************************************************************************************************************** ################################################################# # EKMS 10M06 <START> # ################################################################# CHANGE_SECURITY_MSG=<html>Your current security setting for external key management(EKM)\ is changed. <br><br></html> TITLE_CHANGE_SECURITY=Confirm Change Security Settings EKM_ENABLED_MSG=<html>Drive Security is enabled on this controller using External<br>\ Key Management(EKM) mode.</html> EKM_MODE_TITLE=Confirm EKM mode enabled REKEY_NOT_ALLOWED=Change current security settings not allowed LOCK_KEY_MUST=Change current security settings operation is not allowed. Please restart the system and try it Again ################################################################# # EKMS 10M06 <END> # #################################################################Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.