####################################################################
# Resource File Version 1.0 #
# TEXT LABEL NAMES #
####################################################################
#start
MSG_UNSUPPROTED_MIX_OF_DRIVES=The drive group contains an unsupported mix of drives. You cannot mix
TEXT_DRIVE_TYPE_SSD=SSD
MSG_UNSUPPROTED_MIX_OF_DRIVES_TEXT1=drives with
TEXT_DRIVE_TYPE_NON_SSD=non-SSD
MSG_UNSUPPROTED_MIX_OF_DRIVES_TEXT2=drives.
TEXT_DRIVE_TYPE_SSD_SAS=SSD(SAS)
TEXT_DRIVE_TYPE_SSD_SATA=SSD(SATA)
MSG_ADD_REMOVE_INPROGRESS = Operation can not be started while Add/Remove physical drive in configuration is in progress !
MSG_NO_AVAILABLE_PD_FOUND = Patrol Read is disabled.
CHANGE_DRIVE_SECURITY_ENTER_PASSPHRASE_WIZARD_PAGE_TITLE=Change Security Settings - Password
BUTTON_IMPORT_LABEL=I(m)port: Import logical configuration from all foreign drives.
BUTTON_CLEAR_LABEL=(C)lear: Remove logical configuration from all foreign drives.
BUTTON_ADVANCED_LABEL=(A)dvanced: Preview, import and clear specific foreign configurations.
MESSAGE_FOREIGN_CONFIG_DETECTED=Foreign drives were detected. You must import or clear these<br>drives before they can be used."
MSG_FOREIGN_CONFIG_CLEARED=The foreign configuration was cleared successfully.
TITLE_FOREIGN_CONFIG_CLEARED=Clear Successful
MSG_CLEAR_FOREIGNCFG_SUCCESS_RESCAN=<html>Foreign Configuration was cleared successfully. <br>More foreign configurations were detected.<br>Would you like to re-scan for foreign configurations?<br><br></html>
MSG_IMPORT_FOREIGNCFG_SUCCESS_RESCAN=<html>Foreign Configuration was imported successfully.<br>More foreign configurations were detected.<br>Would you like to re-scan for foreign configurations?<br><br></html>
MSG_DELETE_CONFIG_CONFIRM_TITLE=Confirm Clear Configuration
MSG_DELETE_CONFIG=<html>You have chosen to clear the configuration. This will<br>destroy all virtual disks. All data on all virtual disks<br> will be lost
MSG_DELETE_CONFIG2=and the preserved cache will be<br>discarded
MSG_DELETE_CONFIG3=Are you sure you want to clear the configuration?</html>
MSG_CONFIRM_CFG_FILE_OVERWRITE=File already exists. Do you want to overwrite ?
DEDICATED_HSP_DESC=<html>A dedicated hot spare will only replace problematic drives on selected drive groups.<br><br></html>
NO_FIRMWARE_FILE1=The specified file is not a valid
NO_FIRMWARE_FILE2=file.\n Please check the file path and try again.
MSG_SELECT_DESTINATION_COPYBACK_DRIVE=Please select atleast one destination drive to copyback.
MSG_LOGIN_CIMOM_FAILURE=Login failed : Unable to connect to CIMOM server!
DISCARD_PINNED_CACHE=<html>When you discard the preserved cache, the data contained in the preserved cache will be<br>permanently lost.
VIRTUAL_DRIVES_CONFIRM=<html><br>Would you like to delete the above offline virtual drives?</html>
MANAGE_PRESERVED_CACHE_TEXT=Manage preserved cache found on the controller.
RETAIN_PRESERVED_CACHE=Controller will retain the remaining preserved cache.
PRESERVED_CACHE_TEXT=Operation cannot be performed with preserved cache.
LABEL_SECURE_DRIVE_GROUPS=(S)ecure Drive Groups:
MSG_DELETELD_TEXT1=<html>You have chosen to delete Virtual Disk
MSG_DELETELD_TEXT2=All data<br> on the virtual disk will be lost
MSG_DELETELD_TEXT3=and the preserved<br> cache for this virtual disk will be discarded
MSG_DELETELD_TEXT4=Are you sure you want to delete Virtual Disk
VD1_RAID_VOLUME_SIZE=Virtual Drive 1, RAID 1 Volume, 1000GB
VD2_RAID_VOLUME_SIZE=Virtual Drive 2, RAID 1 Volume, 1000GB
VD3_RAID_VOLUME_SIZE=Virtual Drive 3, RAID 1 Volume, 1000GB
VD4_RAID_VOLUME_SIZE=Virtual Drive 4, RAID 1 Volume, 1000GB
VD5_RAID_VOLUME_SIZE=Virtual Drive 5, RAID 1 Volume, 1000GB
VD6_RAID_VOLUME_SIZE=Virtual Drive 6, RAID 1 Volume, 1000GB
VD7_RAID_VOLUME_SIZE=Virtual Drive 7, RAID 1 Volume, 1000GB
VD8_RAID_VOLUME_SIZE=Virtual Drive 8, RAID 1 Volume, 1000GB
REKEY=Rekey operation failed.
NO_FOREIGN=No Foreign Config
OPENED_SCREEN=Opened Screen for :
VOLT=V
SELECT_REPLACE=Select Replacement
CONTOLLER_FIRMWARE=controller firmware
WARNING_FLASH=Warning : This will flash the
CURRENT_VERSION=! Current version is
PRODUCT_INFO1=RAID Web Console 2
PRODUCT_INFO1=MegaRAID Storage Manager
DISCARD_PINNED_CACHE1= This data may belong to the foreign configuration that you should import<br>before discarding the cache.
DISCARD_PINNED_CACHE2=<br><br>Are you sure you want to discard the preserved cache for the selected virtual drives?<br></html>
VIRTUAL_DRIVES_TEXT1=<html>The preserved cache for the following offline virtual drives can<br>only be discarded by deleting the virtual drives.<br><br></html>
UNABLE_CREATE_KEY=Unable to create key
PR_NOT_START_PD=Patrol Read cannot be started because there are no PD available
PR_NOT_START_PD_CFG=Patrol Read cannot be started because there is no configuration available.
MSG_LEARN_CYCLE1=You cannot start a learn cycle at this time because
MSG_LEARN_CYCLE2=the battery pack is not connected to the controller
MSG_LEARN_CYCLE3=the battery backup unit's voltage is low
MSG_LEARN_CYCLE4=the battery backup unit is over temperature
MSG_LEARN_CYCLE5=the battery backup unit is charging
MSG_LEARN_CYCLE6=the battery backup unit is discharging
MSG_LEARN_CYCLE7=a learn cycle has already been requested
MSG_LEARN_CYCLE8=a learn cycle is already in progress
MSG_LEARN_CYCLE9=there was a failure
MSG_LEARN_CYCLE10=the learn cycle timed out
MSG_LEARN_CYCLE11=an I2C error was detected
MENU_MANAGE_PRESERVED_CACHE=Manage Preserved Cache
MESSAGE_ALL_FDE_DRIVES_ERASED
MSG_INITTYPE_TEXT=Initialization Type :
INFO=Information
WARN=Warning
CRTL=Critical
FATAL=Fatal
DEAD=Dead
LABEL_DRIVE_GROUP=Drive Group:
DEFWRITE_POLICY_DSC=Default Write Policy
MSG_REPLACE_BY1=.\n\nThis may take some time. Go to the show\nprogress option to view the progress of this\nreplacement or abort the operation.
MSG_REPLACE_PHYSICAL_DISK_INFO_TITLE=Replace Physical Drive
RWC2_BANNER_IMAGE=banner35.png
MSG_DSC=Message
IP_ADDR_DSC=Local Host IP address
TITLE_DISCARD_PINNED_CACHE=Confirm Discard Preserved Cache
CONFIRM_TEXT_WITH_MNEMONIC=(C)onfirm
TITLE_OFFLINE_VIRTUAL_DRIVES=Offline Virtual Drives.
VIRTUAL_DRIVES_LABEL=Offline virtual drives:
DISCARD_PRESERVED_CACHE_BUTTON_TEXT=Discard Cache
BUTTON_CLOSE_TEXT_WITH_MNEMONIC=Close
VIRTUAL_DRIVES_LABEL=Virtual drives with preserved cache:
TITLE_MANAGE_PRESERVED_CACHE=Manage Preserved Cache
PRESERVED_CACHE_RETAINED_TITLE=Preserved Cache Retained
LDRIVE_MISSING=Missing
LDRIVE_STATE_MISSING=Missing
TITLE_PRESERVED_CACHE=Cannot Perform with Preserved Cache
MESSAGE_ALL_FDE_DRIVES_ERASED=
SUGGESTED_PASS_PHRASE_DIALOG_TITLE=Suggested Password
LABEL_SUGGESTED_PASS_PHRASE=(S)uggested Password:
ADAPTER_OPERATION_14=Manage Preserved Cac(h)e
ADAPTER_OPERATION_14_DESC=Manage the preserved cache of missing and offline virtual disks.
CC_SCHEDULE_SET_CONFIRM_MSG=Consistency check is scheduled at
PROPERTY_NCQSTATUS_TEXT=Native Command Queuing
PROPERTY_NCQ_ENABLED=Enabled
PROPERTY_NCQ_DISABLED=Disabled
PROPERTY_SMART_CB=SMART Copyback
LABEL_DRIVE_GROUP=Drive Group:
PROPERTY_TOTAL_CAPACITY=Total Capacity
PROPERTY_FREE_CAPACITY=Free Capacity
PROP_ENCRYPTION_TYPE_CTRL_BASED=Controller-based encryption
PROP_ENCRYPTION_TYPE_FDE_BASED=Full disk encryption
BBU_NEXTLEARN_CYCLE=Next Learn Cycle
AUTO_LEARN_DISABLED=Disabled
MSG_DELETELD_CONFIRM_TITLE=Confirm Delete Virtual Disk
PD_STATE_HOTSPARE_UNUSABLE=Unusable
PD_STATE_SYSTEM=JBOD
OPERATION_COPYBACK_TEXT=Replacing
80886=Replacing
AUTO_VD_NAME=Auto VD
USE_ALLARRAYS_DSC=Use Existing and New drive groups
MSG_GUIDED_VD=Guided VD
MSG_NO_FOREIGN_IMPORT_TITLE=No Configurations To Import
TITLE_FOREIGN_CONFIG_DETECTED=Foreign Configuration Detected
LABEL_CHOOSE_AN_OPTION=Choose an option:
FOREIGN_CFG_LABEL_WARNINGS=(W)arnings
MSG_INCOMPLETE_FOREIGN_CFG_WARN=Incomplete Foreign Config, Please see the warnings !
TEXT_CONFIGURATION=Configuration
OUT_OF= out of
FAILED_TO_IMPORT= configurations failed to import.
LABEL_TABLE_COLUMN_DRIVE=Drive
LABEL_TABLE_COLUMN_KEYID=Security Key Identifier
MSG_LABEL_PREVIEW=(P)review
80886_WITH=Replacing with
ADAPTER_TYPE_ISCSI_UNKNOWN=Unknown
MSG_MAX_LEARN_DELAY_EXCEEDED1=Learn Delay Interval must not be greater than 7 Days !
CANNOT_IMPORT_LOCKED_DRIVES_DESC1=Cannot Import Locked Drives
TITLE_CANNOT_IMPORT_LOCKED_DRIVES1=Drive Security Required to Import
DRIVE_SECURITY_NEEDED_TO_IMPORT_DESC1=strSecurityNeeded
CONSISTENCY_SETTING=Consistency Check Settings
PROP_GENERAL=<html><b>General:</b></html>
PROP_FWPROP=<html><b>Firmware Properties:</b></html>
PROP_DSPROP=<html><b>Drive Security Properties:</b></html>
PROP_BOPROP=<html><b>Background Operation Properties:</b></html>
PROP_IOC=<html><b>IO and Cache Policies</b></html>
PROP_WPOLICY=<html><b>Write Policy</b></html>
PROP_ECLPROP=<html><b>Enclosure Properties</b></html>
PROP_COMPPROP=<html><b>Component Properties</b></html>
#end
ADAPTER_OPERATION_SSD_GUARD_ENABLE=Enable SSD (G)uard
ADAPTER_OPERATION_DESC_SSD_GUARD_ENABLE=This will enable the SSD Guard capability.
ADAPTER_OPERATION_SSD_GUARD_DISABLE=Disable SSD (G)uard
ADAPTER_OPERATION_DESC_SSD_GUARD_DISABLE=This will disable the SSD Guard capability.
PROPERTY_SSD_GUARD=SSD Guard
PROPERTY_SSD_GUARD_ENABLED=Enabled
PROPERTY_SSD_GUARD_DISABLED=Disabled
PROPERTY_MEMUMEMORYNCORRECTABLEERRORCOUNT_TEXT = Memory uncorrectable count
#PATROL READ
PR_MODE_SELECT = Select Patrol Read (m)ode:
PR_MAX_PD_LABEL = Ma(x)imum number of Physical drives allowed for Patrol Read concurrently:
PR_VD_PD_DESC = Include the Virtual drives for whose physical drives, Patrol Read should be performed:
PR_AVAILABLE = Availa(b)le Virtual drives:
PR_INCLUDED = I(n)cluded Virtual drives:
PR_ADD = (A)dd >
PR_ADD_ALL = A(d)d All >>
PR_REMOVE = (R)emove <
PR_REMOVE_ALL = Remo(v)e All <<
PR_INTERVAL = Patrol Read Interval
PR_INTERVAL_LABEL = Selec(t):
PR_SCHEDULE = Patrol Read Schedule
PR_START = (P)erform Patrol Read when I press OK.
PR_START_TIME = Start Patrol Read on:
PR_NAME_MENU = (P)atrol Read
PR_START_MENU = Start (P)atrol Read
PR_STOP_MENU = Stop (P)atrol Read
PR_ENABLE_MENU = (E)nable Patrol Read
PR_DISABLE_MENU = Disabl(e) Patrol Read
PR_SET_PROPERTIES = Se(t) Patrol Read Properties
PR_ADD_VD = <html>The selected virtual drive(s) are part of one or more physical drives.<br>Adding the virtual drive will add\ the corresponding virtual drives for<br>Patrol Read.<br><br>Are you sure you want to add ?</html>
PR_REMOVE_VD = <html>The selected virtual drive(s) are part of one or more physical drives.<br>Removing the virtual drive \will remove the corresponding virtual drives.<br><br>Are you sure you want to remove ?</html>
PR_MONTH = M(o)nth:
PR_DAY = Dat(e):
PR_YEAR = (Y)ear:
PR_TIME = T(i)me:
PR_NON_STOP = R(u)n Patrol Read non-stop.
PR_CLOSE = Do you want to close the wizard ?
PR_SAVE = Patrol Read properties have been saved.
PR_SAVE_START = Patrol Read properties have been saved and started.
PR_CONFIRMATION_TITLE = Patrol Read - Confirmation
PR_SAVE_START_TITLE = Patrol Read properties saved and started
PR_SAVE_TITLE = Patrol Read properties saved
PATROL_READ_TITLE = Patrol Read - Information
PR_DISABLED_TITLE = Patrol Read - Disabled
PR_DISABLED = Patrol Read is disabled.
PR_NO_PD_TITLE = Patrol Read - No PD
PR_NO_PD = Patrol Read cannot be started because there are no PD available.
PR_NO_CONFIG_TITLE = Patrol Read - No Configuration
PR_NO_CONFIG = Patrol Read cannot be started because there is no configuration available.
PR_BACKGROUND_PROCESS_TITLE = Patrol Read - Background process running
#CASPIAN-2 CR's
LDRIVE_OPERATION_CAPACITY_EXP = E(x)pand Virtual Disk Capacity
LDRIVE_OPERATION_CAPACITY_EXP_DESC = Expands the capacity of the Virtual Disk.
MSG_VOLUME_EXPANSION_WARNING = <html>It is advisable to backup the data before you proceed. <br>This operation cannot be stopped once started. <br><br>Do you want to continue?</html>
OPERATION_OCE_TEXT = Capacity Expansion.
MSG_RAID1E_WARNING = The virtual dirve cannot be migrated to MegaRAID controller. Do you want to continue?
PROPERTY_IMPORTABLE_TEXT = Importable
PROPERTY_CERTIFIED_TEXT = Certified
FOREIGN_DRIVE_NOT_IMPORTABLE_IMAGE = foreign_drive_non_importable.png
PROPERTY_PD_TEMPERATURE=Temperature
PROPERTY_DEVICESPEED_TEXT=Drive Speed
PROPERTY_LINKSPEED_TEXT=Negotiated Link Speed
LDRIVE_OPERATION_9=Clear (B)ad Blocks
LDRIVE_OPERATION_9_DESC=Remove bad blocks that exist on the drives composing the disk group and virtual disk. Click go to clear bad blocks.
PROPERTY_BAD_BLOCKS_EXIST_METHOD_TEXT=Bad Blocks
MSG_CLEAR_BAD_BLOCK_WARNING=<html>This operation will be destructive to data.Make sure the<br>bad blocks do not affect data before you clear them.\
<br><br>Are you sure you want to clear bad blocks?</html>
MSG_PDMISSING_CONFIRM=Warning: This will mark the Physical Drive as Missing! Are you sure?
RAID_LEVEL_1_DISPLAY_STRING=RAID 1
#VenusII-MenuRedesign
#start
STARTINIT=S(t)art Init
STOPINIT =S(t)op Init
MENU_CONTROLLER=(C)ontroller
MENU_DRIVEGROUP=(D)rive Group
MENU_PHYSICALDRIVE=(P)hysical Drive
MENU_VIRTUALDRIVE=(V)irtual Drive
MENU_BBU=(B)BU
#Controller
MENU_ENBLPR=Enabl(e) Patrol Read
MENU_ENBLPR_DESCR=Enable Patrol Read operation on the selected physical drives
MENU_DSBLPR=Disabl(e) Patrol Read
MENU_DSBLPR_DESCR=Disable Patrol Read operation on the selected physical drives
MENU_STRTCC=Start Consistenc(y) Check
MENU_STPCC=Stop Consistenc(y) Check
ENABLESMART=Enable S.(M).A.R.T
ENABLESMART_TEXT=Enable S.M.A.R.T
DISABLESMART=Disable S.(M).A.R.T
DISABLESMART_TEXT=Disable S.M.A.R.T
ENABLESMART_DESCR=Enable S.M.A.R.T Operation
DISABLESMART_DESCR=Disable S.M.A.R.T Operation
MENU_VERIFY_SECURITY=Verify Security Setti(n)g
MENU_SHOW_PROGRESS=Sh(o)w Progress
MENU_LOAD_BIOS=Load (B)IOS
#Virtual Disk
MENU_RENAME_VD=(R)ename Virtual Drive
MENU_EXPAND_VD=E(x)pand Virtual Drive Capacity
MENU_SNAPSHOT_ENBL=Enable (S)napshots
MENU_SNAPSHOT_DSBL=Disable (S)napshots
TEXT_RENAME_VD=Rename Virtual Drive
MSG_IMPORT_FOREIGNCFG_FAILED_MAXVD=Cannot import the remaining foreign configuration. \n Because, the number of Logical Drives supported by \n Controller has been exceeded!
#End
MSG_MEMFREE_FAILED=Failed to free memory
PROPERTY_ISUARTPRESENT_TEXT=UART Present
MANUAL_MODE_ARRAY=(A)rray Selection
MANUAL_MODE_ARRAY_1=Array Selection
AUTHENTICATE_DIALOG_TITLE=Enter User Name & Password
RECONWIZARD_TEXT=Reconstruction Wizard
IOPOLICY_CACHED=Cached IO
LEGEND_UNUSED_TEXT=Available
CONFIGWIZARD_TEXT=Configuration Wizard
PROPERTY_DEVID_TEXT=Device ID
PROPERTY_PSUPPLYNUMBER_TEXT=Number of Power Supplies
#MENU_LOGVIEW_TEXT=(V)iew Saved Log
LEGEND_USED_TEXT=Configured
LABEL_BGIRATE_TEXT=(B)GI Rate
WRITEPOLICY_WRITE_BACK= Write Back
WRITEPOLICY_ALWAYS_WRITE_BACK = Always Write Back
WRITEPOLICY_WRITE_BACK_WITH_BBU=Write Back with BBU
BBU_MFG_DATE=Mfg Date
OPERATION_INSTRUCTION_TEXT=<html>Select an operation from the left and press go to<br>invoke the selected Operation!</html>
LABEL_EXISTINGARRAY_ONLY=Use (E)xisting Arrays Only
LDRIVE_STATE_OFFLINE=Offline
PROPERTY_VENDORINFO_TEXT=Vendor ID
MSG_SET_CONTROLLER_PROP=Warning: This will set controller properties.
MSG_ASSISTEDCONF_FAILED=Assisted Configuration Failed!
PDTYPE_FC=Fibre Channel
BBU_MAX_ERROR=Maximum Error Margin
MSG_FAILED_FOREIGNCFG=Cannot read Foreign Config!
OUT_OF= out of
FAILED_TO_IMPORT= configurations failed to import.
PROPERTY_FWSTATE_TEXT=Firmware State
RECON_DRIVE_SEL=Drive Selection
ENCL_ELEMSTATUS_UNRECOVERABLE=Unrecoverable
ENCL_ELEMSTATUS_NOT_INSTALLED=Not Installed
PROPERTY_SUBVENDORID_TEXT=SubVendor ID
MSG_NO_FOREIGN_CONFIG=NO Foreign Configuration is found!
MSG_RECON_INPROGRESS=Operation cannot be started while reconstruction is in progress!
MSG_STATUS_GUIDEDFINISH=Change the number, size and other parameters for Virtual Disks and press Next
BBU_TYPE=Battery Type
GUIDED_MSG_TEXT=The capacity mentioned will be used as an approximation while creating the virtual disks.
MENU_LOG_TEXT=(L)og
MSG_DELPDFROMARRAY_LDEXISTS=Cannot delete Physical Drive from the array because one or more Virtual Disk is defined on this array!
PROPERTY_CACHEFLUSHINTERVAL_TEXT=Cache Flush Interval
BUTTON_GUIDEDCONF_TEXT=(G)uided Configuration
MSG_IGNORE_FOREIGN_CONFIG=Do you want to ignore the foreign configuration?
MSG_NOARRAY_SELECTED=Please specify an array!
BUTTON_IMPORT_CONFIG=Import Configuration
LABEL_UNUSEDARRAYS_TEXT=Unused Arrays
BUTTON_RECLAIM_TEXT=Reclai(m)
RAID_LEVEL_5_DISPLAY_STRING=RAID 5
MSG_CLEAR_FOREIGN_CONFIG=This will clear the selected Foreign Configuration! Are you sure?
MSG_CONFIG_FAILED=Cannot write configuration: Unknown Exception!
PROPERTY_RAWSIZE_TEXT=Raw Size
PD_STATE_OFFLINE=Offline
MSG_DISBL_ALARM=Warning: This will start Patrol Read operation.
MSG_INVALID_CTRL=Incorrect controller number specified
MSG_CONF_EXISTS=Configuration exists. You must clear the existing configuration before adding a new one.
MSG_SCSINAME_FAILED=Failed to get SCSI device name
PD_STATE_FAILED=Failed
LEGEND_HIGHLIGHTED_TEXT=Selected VD
BBU_MFG_NAME=Mfg Name
ADAPTER_OPERATION_8_DESC=User configurable task rate priorities for controller
FAILED_SERVER=Failed
MSG_GUIDEDCONFIG_FAILED=Guided Configuration failed!
MANUAL_DRIVE_SELECTION_JTABLE_PORT_COLUMN_HEADING=Port
MANUAL_MODE_FINISH=Fi(n)ish
MANUAL_MODE_FINISH_1=Finish
MSG_NOLD_SELECTED=Please specify a virtual disk!
LABEL_CAPACITY_TEXT=Total (C)apacity:
MSG_VERSION_MISMATCH=Mismatch in versions.
BBU_OPERATION_REFRESH_DESC=Rescans and updates the BBU information
RAID_LEVEL_3_DISPLAY_STRING=RAID 3
BBU_OPERATION_SLEEP=Sleep
MSG_NOLD_TEXT=Please create at least one virtual disk and then proceed to next step!
MSG_CONFIRM_ARRAYDELETE=This will delete the Array. Are you sure?
MSG_STATUS_ARRAYSEL=Select one or more physical drive(s) and use the right arrow to move them to the right panel to create arrays
MSG_FW_REBOOT=You must reboot the system to bring the firmware in effect
ABOUT_OSVERSION_TEXT=Operating System Version
DISK_CACHE_UNCHANGED=Unchanged
PDTYPE_SATA=SATA
PROPERTY_PDSTATE_TEXT=Physical Drive State
MSG_INAVLID_PARAM=The input parameter to the command was invalid
LOGICAL_TAB_TEXT=Logical
BUTTON_UPDATE_TEXT=(U)pdate
MAXPD_COUNT_TEXT=Ma(x)imum PD Count for patrolling:
COER_MODE_128MB=128 MB
PROPERTY_ISBBUPRESENT_TEXT=BBU Present
MSG_STATUS_GUIDED=Select the choices given above and then proceed to next step for guided configuration
LOG_DETAILS_DIALOG=Event Details
PHDRIVE_OPERATION_1_DESC=Changes a drive from OFFLINE state to ONLINE state
PROPERTY_YES_TEXT=Yes
PROPERTY_DEFWRITEPOLICY_TEXT=Default Write Policy
MSG_RECON_CHGRL=This operation cannot be aborted. Do you want to continue?
LABEL_LDNUM_HINT=(D)esired Number of Virtual Disks :
MSG_LINUX_LIBSYSFS_MISSING=libsysfs is not present in the system
RECON_INSERT_BUTTON_TEXT=(A)dd Drive
LABEL_MB_TEXT=MB
LABEL_REDUNDANCY_ONLY=(R)edundancy Only
DEV_DIRECT_TEXT=Disk
DIRECT_IO=Direct IO
BBU_AVGTIMEFULL_CAPACITY=Average Time to Full
MSG_INIT_FAILED=Storelib Initialization failed
MSG_OP_TIMEDOUT=Command to driver timed out
PRPOERTY_HOSTINTERFACE_TEXT=Host Interface
PROPERTY_DEVICEPORTCOUNT_TEXT=Device Port Count
PD_CACHE_ENABLE=Enable
PROPERTY_RECONRATE_TEXT=Reconstruction Rate
MSG_SELECT_ARRAY=Please select one or more arrays!
MAX_DRIVE_SELECTION_EXCEEDED_TEXT=You have exceeded maximum number of drive selection
RECONSTRUCTION_CARD_TITLE= You have exceeded maximum number of drive selection
LABEL_REDUNDANCY_NO=N(o) Redundancy
MSG_LOGIN_EXFAILURE=Login failed: Exception while login!
LEGEND_LDRIVELOCATION_TEXT=Virtual Disk Location
MSG_NOSTOARGEAPI=No Storage Controller Found!
PROPERTY_TEMPERATURE_TEXT=Temperature
LABEL_ELAPSED_TEXT=Elapsed time:
PD_STATE_REBUILD=Rebuild
READ_AHEAD_NONE=No Read Ahead
LABEL_EXISTINGARRAYS_GROUP=Existing Arrays
RECON_FINISH_SEL=Finish
MSG_SETLDPARAM_FAILED=Cannot set virtual disk parameters!
LABEL_USE_ALLARRAYS=Use Existing and New (A)rrays
LABEL_ADD_HSP=-- Add Hotspare To --
MSG_ABORT_NOT_POSSIBLE=Abort not possible
LABEL_VOLUMEPROP_TEXT=Virtual Disk Parameters
SECOND_TEXT=second
MENU_LOGSAVE_TEXT=(S)ave
BUTTON_BROWSE_TEXT=(B)rowse
PHDRIVE_OPERATION_10_DESC=Aborts Locate Physical Drive operation on a physical disk
MSG_DEDICATEDHSP_FAILED=Cannot make dedicated hotspare: Error Code:
LABEL_DEFWRITEPOLICY_TEXT=(W)rite Policy:
LABEL_EVENT_TYPE=Event Type:
MSG_SETLDPROP_CONFIRM=Warning: This will set Virtual Disk properties! Are you sure?
MENU_CONFIG_TEXT=(C)onfiguration
ADAPTER_TEXT=Controller
ABOUT_OSNAME_TEXT=Operating System Name
LABEL_HOSTNAME_TEXT=Host
MSG_CONFIRM_LOGOVERWRITE=File already exists. Do you want to overwrite?
MSG_INVALID_FILETYPE=This is not a valid FW File!
LABEL_ACCESSPOLICY_TEXT=Access Pol(i)cy:
MSG_CLEARCONFIG_FAILED=Clear Configuration failed: Unknown Exception
PHDRIVE_OPERATION_2_DESC=Changes a drive from ONLINE state to OFFLINE state
PDTYPE_UNKNOWN=Unknown
GRP_SHOWPROGRESS_TITLE=Group Show Progress
ENCL_ELEMSTATUS_NONCRITICAL=Non Critical
MSG_PROTOCOL_ERROR=Fatal Error: Network protocol error!
WRITEPOLICY_WRITE_THROUGH=Write Through
PROPERTY_SLOTNUMBER_TEXT=Number of Slots
PRODUCT_INFO=MegaRAID Storage Manager
GRAPHICALVIEW_TAB_TEXT=Graphical View
LABEL_TIME_STAMP=Time of Event:
MSG_FLASHFW_CONFIRM=Warning: This will flash the controller firmware! Current firmware version is
LABEL_INITIALIZATION_TEXT=Initiali(z)ation Type:
PROPERTY_HOSTNAME_TEXT=Host Name
PROPERTY_CLUSTERENABLE_TEXT=Cluster Enable
SORTBYCOMBO_NAME_TEXT=Name
MSG_LDPROGRESS_TEXT=Ongoing Operations on Virtual Disks
NEWLDCREATED_TEXT=New Virtual Disk
MENU_GRINITIALIZE_TEXT=(I)nitialize
BBU_TEMP_STATUS=Temperature
ENCL_ELEMSTATUS_UNKNOWN=Unknown
UNPROTECTED_DRIVE_GROUPS=Unprotected Drive Groups
UNPROTECTED_DRIVE_GROUPS_LABEL=(U)nprotected Drive Groups:
UNPROTECTED_MSG=<html>This global hot spare will not protect the following<br>drive groups because it is a
DRIVE=drive</html>.
CACHED_IO=Cached IO
LDRIVE_OPERATION_8=Set Virtual Drive (P)roperties
LDRIVE_OPERATION_7=Abort Initiali(z)ation
PD_STATE_HOTSPARE=Hot Spare
LDRIVE_OPERATION_6=Start (I)nitialization
LDRIVE_OPERATION_66=Stop (I)nitialization
LABEL_REDUNDANCY_TEXT=(R)edundancy Type:
LDRIVE_OPERATION_5=Cancel Check Consistency
NEXT_LEARNTIME_TEXT=Next Learn Time (sec):
LDRIVE_OPERATION_4=(C)heck Consistency
BBU_AVGTIMEEMPTY_CAPACITY=Average Time to Empty
MENU_CONFIGWIZARD_TEXT=Configuration (W)izard
VOLUME_CANDIDATE_PANEL_ADD=Add
BUTTON_CONNECT_TEXT=(C)onnect
BUTTON_FINISH_TEXT=(F)inish
LABEL_FWVERSION_TEXT=Framework Version:
LD_ACCESS_RDONLY=Read Only
PHDRIVE_OPERATION_11_DESC=Assigns the Unconfigured Good drive as a global hotspare
BBU_GAS_GAUGE=Gas Gauge Status
LABEL_POWER_TEXT=Power Supply
MSG_LOGIN_FAILURE=Login failed: Invalid username or password!
MSG_STATUS_IR_MANUALVDCREATE=<html>Select one Array from the top left panel, change the various properties and press accept
DISK_CACHE_DISABLED=Disabled
MSG_CONFIRM=Are you sure?
MSG_STATUS_FINISH=View the summary and finally press Finish to write the configuration
NOBBU_TEXT=No Battery
BBU_OPERATION_SETPROP_DESC=Defines various Battery Operation Parameters
BBU_OPERATION_LEARN_DESC=Starts a battery calibration cycle
LABEL_STRIPESIZE_TEXT=Stri(p)e Size:
PDTYPE_SAS=SAS
RECON_REMOVE_BUTTON_TEXT=REMOVE
LDRIVE_OPERATION_1_DESC=Deletes the specified virtual disk
MSG_INIT_NOT_COMPLETED=Initialization was not yet completed.
TEXT_CLIENT_TIME=Client time
MSG_GET_PARTITION_FAILED=Failed to get partition. Partition may not exist
PD_STATE_UNCONFGOOD=Unconfigured Good
FOREIGN_CONFIG_WIZARD=Foreign Configuration Wizard
MSG_LDOS_MAP_INCOMPLETE=The LD to OS drive mapping is not complete. This will happen when fw reports
SELECTED_DRIVES_TEXT=(S)elected Drives
PROPERTY_ACCESSPOLICY_TEXT=Access Policy
PROPERTY_FLASHSIZE_TEXT=Flash Size
PROPERTY_ISNVRAMPRESENT_TEXT=NVRAM Present
BBU_FW_STATUS=Firmware Status
LABEL_POWERS_TEXT=(P)ower Supplies
PROPERTY_PREDFAILCOUNT_TEXT=Pred Fail Count
PROPERTY_LDCOUNT_TEXT=Virtual Disk Count
ADAPTER_TYPE_PCIX=PCIX
AUTO_MODE_FINISH=Fi(n)ish
AUTO_MODE_FINISH_1=Finish
MSG_PDREBUILD_CONFIRM=Warning: This will rebuild the Physical Drive! Are you sure?
PROPERTY_LDDEGRADEDCOUNT_TEXT=Degraded Virtual Disk Count
BBU_ABSCHARGE_STATE=Absolute State of Charge
PROPERTY_LDRIVESIZE_TEXT=Size
ADAPTER_TYPE_PCIE=PCIE
MSG_INVALID_ARRAYSIZE=Please Create arrays with at least 2 physical drives then go to next step!
LABEL_READPOLICY_TEXT=R(e)ad Policy:
GUIDED_CONFIG_STEP3=Finish
GUIDED_CONFIG_STEP3_1=Finish
GUIDED_CONFIG_STEP2=V(i)rtual Disk Parameters
GUIDED_CONFIG_STEP2_1=Virtual Disk Parameters
BUTTON_ABORT_TEXT=Abort
GUIDED_CONFIG_STEP1=G(u)ided Config
GUIDED_CONFIG_STEP1_1=Guided Config
MSG_AUTOCONFIG_FAILED=Auto Configuration failed!
RECON_DELETE_BUTTON_TEXT=(R)emove Drive
MSG_ABORTPROG_CONFIRM=Do you want to abort this operation?
BBU_OPERATION_REFRESH=Refresh
PROPERTY_FWBUILDTIME_TEXT=Firmware Build Time
BBU_DESIGN_CAPACITY=Design Capacity
READ_AHEAD_ALWAYS=Always Read Ahead
LABEL_FANS_TEXT=(F)ans
SORTBYCOMBO_TYPE_TEXT=Type
CONFIGURATION_NOTE=<html>Note: Drives containing boot partitions, foreign configurations or unsupported drives will not be \
listed because they can not be used in new configurations.</html>
MSG_CANNOT_ABORT_OP=The operation cannot be aborted!
PHDRIVE_OPERATION_12_DESC=Designates a ready or Unconfigured Good drive as a dedicated hotspare to the specified array(s)
LABEL_NOREDUNDANCY_TEXT=No Redundancy
MSG_PDOFFLINE_CONFIRM=Warning: This will make the Physical Drive Offline! Are you sure?
MSG_PDONLINE_CONFIRM=Warning : Forcing a failed physical disk to Online will result in changing the virtual disk state. \
\nThis disk will immediately start participating in the virtual disk operations and may lead to data corruption. \
\n\nAre you sure you want to continue?
RECON_NOCHANGE_BUTTON_TEXT=(C)hange RAID Level
GRP_INITDLG_TITLE=Group Initialization
BBU_TEXT=Battery Backup Unit
LABEL_LDNAME_TEXT=(N)ame:
STATUS_LOG_SERVER=Displaying log from server
LDRIVE_OPERATION_2_DESC=Identifies virtual disk members by blinking the associated physical disk(s) activity LED
PROPERTY_CURWRITEPOLICY_TEXT=Current Write Policy
MSG_DELARRAY_ILLEGAL=Cannot delete new Array: Illegal Configuration Exception!
LABEL_DOMAIN_ADDR=Connect to (r)emote server at IP address:
MSG_INVALID_LDOPTION=cannot create Virtual Disk: Invalid input parameters for creating Virtual Disk!
NEWLD_PROPERTY_INPUT=Virtual Disk Properties
PROPERTY_ISCLUSTERACTIVE_TEXT=Cluster Active
LOGGERHEADER_DESCRIPTION_TEXT=Description
LABEL_OSNAME_TEXT=OS
MENU_FILE_TEXT=(F)ile
MENU_MANAGE_TEXT=(M)anage
FULL_INIT_TEXT=Full Initialization
TEXT_SEC_FRM_REBOOT=seconds from reboot
PROPERTY_No_TEXT=No
PROPERTY_HOSTPORTCOUNT_TEXT=Host Port Count
BBU_TYPE_BBU=BBU
WRITEPOLICY_WRITE_ADAPTIVE=Write Adaptive
ABOUT_SERVERINFO_TEXT=(S)erver Info
LABEL_SELECTLD_TEXT=Select Excluded Virtual Disks:
PROPERTY_LDRIVERL_TEXT=Current RAID Level
MSG_CONFIRM_ADDCFG=<html>This operation will try to configure the controller based on a saved configuration.<br>Unstable conditions might arise due to difference in physical devices in the two configurations.<br>Are you sure ?</html>
ABOUT_HOSTNAME_TEXT=HostName
MENU_LOGCLEAR_TEXT=(C)lear
HEALTHY_SERVER=Healthy
ACCESS_READ_WRITE=Read Write
PHDRIVE_OPERATION_13_DESC=Removes the hotspare assignment and changes the drive state to UNCONFIGURED GOOD
ADAPTER_OPERATION_1_DESC=Sets controller alarm to on to alert user when the controller
MENU_HELP_TEXT=(H)elp
PROPERTY_REVLEVEL_TEXT=Revision Level
PD_CACHE_DISABLE=Disable
BUTTON_AUTOCONF_TEXT=(A)uto Configuration
SERVERINFO_LABEL_TEXT=Server Information
LABEL_REDUNDANCY_GROUP=Redundancy
PROPERTY_HOSTOSARCH_TEXT=OS Architecture
LDRIVE_STATE_PARTDERGRADED=Partially Degraded
MSG_GETRDLEVELSIZE_FAILED=Cannot get possible RAID level and size: Unknown Exception!
MINUTE_TEXT=minute
LABEL_LDSUMMARY_TEXT=(V)irtual Disk Summary
MENU_OPERATION_TEXT=(G)o To
ACCEPT_ARRAY=A(c)cept
MSG_DELETELD_CONFIRM=Warning: This will delete the Virtual Disk! Are you sure?
LABLE_KERNELVERSION_TEXT=Kernel Version:
PD_STATE_UNCONFBAD=Unconfigured Bad
LDRIVE_OPERATION_3_DESC=Aborts the Locate Virtual Disk operation
PROPERTY_COERCEDSIZE_TEXT=Coerced Size
PHDRIVE_OPERATION_5_DESC=Replaces a drive of a degraded array that is marked missing with an UNCONFIGURED GOOD drive
PROPERTY_REBUILDRATE_TEXT=Rebuild Rate
PROPERTY_HOSTOSVER_TEXT=OS Version
MSG_FATAL_RESCAN_ERROR=Fatal error: rescan failed! Exiting...
PROPERTY_DEVICEPORTADDRESS_TEXT=Device Port Address
DEGRADED_SERVER=Degraded
ENCLOSURE_TEXT=Enclosure
PROPERTY_FWVERSION_TEXT=Firmware Version
LABEL_NUMVIRTUALDISK_TEXT=(V)irtual Disk Count:
MSG_CONFIRM_LOGSAVE_BEFORE_DELETE=Do you want to save the existing log?
OPERATION_RECON_TEXT=Reconstruction
FREQUENCY_TEXT=Execution Fre(q)uency:
LABEL_ESTIMATED_TEXT=Estimated time left:
LABEL_ARRAY_FREE=Arrays with Available Space
MSG_NOCONFIG_POSSIBLE=No new Virtual Disk can be added to the configuration!
LABEL_WITHREDUNDANCY_TEXT=With Redundancy
PROPERTY_MEMUNCORRECTABLEERRORCOUNT_TEXT=UnCorrectable Error Count
MSG_INVALID_DATA=Invalid data sent to driver
MSG_INVALID_OPSTATE=The drive is not in a state to perform
LD_ACCESS_BLOCKED=Blocked
GUIDED_CONFIG_STEP=Finish
MSG_INVALID_IPADDR=Invalid IP Address!
AUTOLEARN_PERIOD_TEXT=Auto Learn Period (sec):
MENU_RECONWIZARD_TEXT=(R)econstruction Wizard
COER_MODE_1GB=1 GB
MSG_FULLACCESS_DENIED=<html>Full Access denied because another user is logged in<br> with full access from IP Address:
MSG_UNKNOWN_ERROR=Operation Failed
OPMODE_MANUAL=Manual
PROPERTY_ALARMENABLE_TEXT=Alarm Enabled
BBU_NEXTLEARN_TIME=Next Learn Time
PHDRIVE_TEXT=Physical Drive
MSG_DATA_BAKUP=It is advisable to backup data before this operation. Are you ready?
ABOUT_OKBUTTON_TEXT=OK
PROPERTY_SASADDR_TEXT=Backend SAS Address
PROPERTY_ISALARMPRESENT_TEXT=Alarm Present
LOGINMODE_TEXT=Login (M)ode:
ADAPTER_OPERATION_2_DESC=Sets the audible controller alarm option to off
PROPERTY_BIOSVERSION_TEXT=BIOS Version
MSG_CONFIRM_LOGDELETE=This will delete the log. Are you sure?
BUTTON_ADDHSP_TEXT=Add HotSpare
CHECKBOX_WITHFIX_TEXT=Automatically Fix errors
LABEL_UNCONF_PDLIST=Unconfigured Physical Drive List
LABEL_NO_EXISTINGARRAY=Do no(t) use Existing Arrays
PROPERTY_WRITEPOLICY_TEXT=Write Policy
MSG_REMOVEHSP_FAILED=Cannot remove hotspare!
MSG_LD_ZERO=Total Number of Virtual Disks must be greater than 0!
PROPERTY_TAB_TEXT=Properties
MENU_ADVANCED_OP=(A)dvanced Operations
MSG_CONN_LOST=Connection to the server has been lost. Do you want to re-login?
LDRIVE_OPERATION_4_DESC=Starts a check consistency operation on the selected virtual disk
PHDRIVE_OPERATION_6_DESC=Marks an offline/failed drive of a degraded array as missing in order to prepare for drive replacement
OPERATION_MODE_TEXT=Operation (M)ode:
MSG_DELPDFROMARRAY_FAILED=Cannot delete Physical Drive from the array!
MSG_RAID0_NOTPOSSIBLE=This RAID level is not possible as there is dedicated hotspare for the specified arrays
RAID_LEVEL_0_DISPLAY_STRING=RAID 0
MSG_ABORTALL_CONFIRM=This will abort all the operations shown above! Are you sure?
MENU_EXIT_TEXT=E(x)it
STATUS_LOG_LOCAL=Displaying log from file
PROPERTY_MEMCORRECTABLEERRORCOUNT_TEXT=Correctable ErrorCount
LABEL_CCRATE_TEXT=Ch(e)ck Consistency Rate
PROPERTY_DEVICEID_TEXT=Device ID
PROPERTY_SLOT_NUMBER=Slot Number
OPERATION_BGI_TEXT=Background Initialize
MANUAL_DRIVE_SELECTION_JTABLE_CAPACITY_COLUMN=Drive Capacity
PROPERTY_PRODUCTINFO_TEXT=Product Info
MENU_GRCHKCONSISTENCY_TEXT=(C)heck Consistency
BGINIT_DISABLE=Disabled
BUTTON_SELECTALL_TEXT=Select (A)ll
MSG_FAIL_SAVE_CONFIG=Save configuration failed
BUTTON_START=(S)tart
LABEL_INITSTATE_TEXT=Init Stat(e):
SERVER_TEXT=Server
MSG_THREAD_CREATE_FAILED=Thread creation failed
PROPERTY_HOSTSTATUS_TEXT=Status
MSG_CMDFAILED_OS=Command failed by Operating System
MENU_LOADPLUGINS_TEXT=Load Plugins
MAX_DRIVE_SELECTION_TEXT=Select Physical Drives
LOGGERHEADER_DATETIME_TEXT=Date / Time
LABEL_RAIDLEVEL_TEXT=RAID (L)evel:
OPERATION_PATROLREAD_TEXT=Patrol Read
MSG_SELECTHOST=Please select a host from the list!
MSG_LINUX_SYSFS_ERROR=An error occurred while accessing sysfs
PROPERTY_DEVICETYPE_TEXT=Device Type
PROPERTY_NO_TEXT=No
PROPERTY_PRODUCTID_TEXT=Product ID
SORTBYCOMBO_IPADDRESS_TEXT=IP Address
PROPERTY_STRIPESIZE_TEXT=Stripe Size
BBU_SERIALNO=Serial No
ADAPTER_OPERATION_3_DESC=Temporarily quiets the controller alarm for the current event
LABEL_SENSORS_TEXT=Sensors:
MSG_ABOUT_LINE2=Copyright \u00a9 2007 LSI Corporation. All Rights Reserved.
RECON_MODE_SEL=Reconstruction Mode
MSG_ABOUT_LINE1=Client Build:
LOGINMODE_FULLACCESS=Full Access
PROP_PDSASADDR_TEXT=SAS Address
LEGEND_UNUSABLE_TEXT=Reserved
PD_CACHE_UNCHANGED=Unchanged
VALUE_NOT_AVAILABLE=Not Available
PHDRIVE_OPERATION_13=(R)emove Hot Spare
PHDRIVE_OPERATION_12=Assign (D)edicated Hot Spare
MSG_INIT_NOT_DONE=Storelib Initialization not completed
PHDRIVE_OPERATION_11=Assign (G)lobal Hot Spare
MSG_INVALID_CMD=Invalid Operation
PHDRIVE_OPERATION_10=Stop (L)ocating Drive
MSG_INVALID_FLASH_IMAGE=The firmware flash image is invalid
MSG_RECON_NOTALLOWED=Reconstruction on this Volume is not allowed!
BBU_FULL_CAPACITY=Full Capacity
MSG_NO_CONNECTION=Fatal Error: Cannot connect to Framework!
LDRIVE_OPERATION_5_DESC=Cancels the current check consistency operation on the selected virtual disk
OPMODE_DISABLED=Disabled
MSG_CONFIG_CORRUPTED=Configuration Corrupted!
PHDRIVE_OPERATION_7_DESC=This option will start rebuild on selected offline/failed drive
BUTTON_CLEAR_CONFIG=Cl(e)ar Configuration
LOGGERHEADER_ERRORLEVEL_TEXT=Error Level
PROPERTY_MEMORYSIZE_TEXT=Memory Size
VOLUME_CANDIDATE_PANEL_REMOVE=Remove
ACCESS_READ_ONLY=Read Only
ADAPTER_TYPE_SAS_3G=SAS_3G
PROPERTY_IOPOLICY_TEXT=IO Polic(y)
PROPERTY_READPOLICY_TEXT=Read Policy
MANUAL_DRIVE_SELECTION_JTABLE__DEVID_COLUMN=Device ID
MSG_CLEAR_FOREIGN_FAILED=Clear Foreign Config failed!
PROPERTY_DISKCACHEPOLICY_TEXT=Disk Cache Policy
PROP_SCSIDEVTYPE_TEXT=SCSI Device Type
WRITE_BACK =Always Write Back
WRITE_BACK_WITH_BBU = Write Back with BBU
RAID_LEVEL_TEXT=RAID
PROPERTY_RAIDLEVEL_TEXT=RAID Level
LABEL_STATE_TEXT=State:
BBU_OPERATION_LEARN=Learn
PROPERTY_COERCIONMODE_TEXT=Coercion Mode
BBU_DESIGN_VOLTAGE=Design Voltage
LDRIVE_STATE_DEGRADED=Degraded
SORTBYCOMBO_OS_TEXT=OS
RECON_ADD_BUTTON_TEXT=ADD
NEWLD_TEXT=New Virtual Disks
MSG_LINUX_SYSFS_NOTMOUNTED=sysfs is not mounted in the system
COER_MODE_NONE=None
LD_ACCESS_RDWRITE=Read Write
ACCESS_BLOCKED=Blocked
LABEL_FAN_TEXT=Fan
MSG_NO_MORE_VD=No more virtual disk can be added
MSG_IMPORT_FOREIGNCFG_SUCCESS=Foreign Configuration was imported successfully!
MSG_NOLD_POSSIBLE=Please Create at least one array then go to next step!
PROPERTY_HOSTOS_TEXT=Operating System
MSG_NOSERVER_FOUND=No Servers found!
MENU_LOGREMOTE_TEXT=(R)ollback to Current Log
PROPERTY_PATROLREADRATE_TEXT=Patrol Read Rate
ADAPTER_OPERATION_4_DESC=Updates controller firmware with a specified firmware image
BUTTON_ACCEPT_TEXT=Accep(t)
MSG_NOASSISTED_POSSIBLE=No configuration possible for the given parameters!
PROPERTY_CCRATE_TEXT=Consistency Check Rate
LDRIVE_TEXT=Virtual Disk
IOPOLICY_DIRECT=Direct IO
RAID_TEXT=RAID
TEXT_GUID=GUID
TEXT_CONFIGURATION=Configuration
MSG_SAVELOG_INVALIDFILE=Cannot save to the file specified! Device not ready!
BUTTON_NEXT_TEXT=(N)ext
OPERATION_FGI_TEXT=Foreground Initialize
OPMODE_AUTO=Auto
BUTTON_DESELECTALL_TEXT=(D)eselect All
STATUS_LOG_FILE_ERROR=No Valid Log found in
LDRIVE_OPERATION_6_DESC=Starts an initialization operation on the selected virtual disk
MSG_ILLEGAL_CONFIG=Cannot create new Array: Illegal Configuration Exception!
PHDRIVE_OPERATION_8_DESC=Cancels the current rebuild operation on a physical drive
PROPERTY_PDTYPE_TEXT=Physical Drive Type
MSG_MAXLDNUM_EXCEEDED=Total number of Virtual Disks must not exceed
MSG_SELCCLDRIVE_TEXT=Select Virtual Disks:
OPERATION_REBUILD_TEXT=Rebuild
NEW_ARRAY_TEXT=New Array
OPERATIONS_TAB_TEXT=Operations
PROPERTY_VENDORID_TEXT=Vendor ID
MSG_CONFIG_NOTALLOWED=Configuration on this adapter is not allowed!
ABOUT_OSARCHI_TEXT=Operating System Architecture
MSG_UNKNOWN=Unknown Exception!
GRP_CONCHECK_TITLE=Group Consistency Check
LABEL_RAID_TEXT=RAID
BBU_RUNTIMEEMPTY_CAPACITY=Run time to Empty
MSG_STATUS_MANUALVDCREATE=<html>Check one or more Array holes from the top left panel, change the various properties and press accept
MSG_INVALID_INPUT=Invalid input specified!
BUTTON_MODIFY_TEXT=(M)odify
PASSWORD_TEXT=(P)assword:
SERVERS_BUTTON_TEXT=(S)erver
LABEL_PATROLREADRATE_TEXT=Patrol (R)ate
ABOUT_IPADDRESS_TEXT=IP Address
READ_AHEAD_ADAPTIVE=Adaptive Read Ahead
BBU_OPERATION_SLEEP_DESC=Sets the BBU to low power storage mode
BBU_REM_CAPACITY=Remaining Capacity
ARRAY_WITH_HOLES=Arrays with Free Space
PROPERTY_BIOSBUILDTIME_TEXT=BIOS Build Time
MODE_SEL_STEP=Mode (S)election
MODE_SEL_STEP_1=Mode Selection
MSG_IMPORT_FOREIGNCFG_FAILED=Import foreign configuration failed!
LABEL_REDUNDANCY_TRY=Redundancy when (p)ossible
ADAPTER_OPERATION_5_DESC=Sets Patrol Read options for configured physical drives
BBU_VOLTAGE_STATUS=Voltage
BUTTON_OPERATION_GO=G(o)
MSG_NOT_RESPONDING=Framework not responding!
MENU_GRPROGRESS_TEXT=Sh(o)w Progress
MENU_FOREIGN_CONFIG=Scan (F)oreign Configuration
MSG_CANNOT_ABORT=Cannot be aborted!
MSG_MEMALOC_FAILED=Failed to allocate memory
WRITE_THROUGH=Write Through
DISK_CACHE_ENABLED=Enabled
LABEL_TEMPERATURE_TEXT=Temperature
MSG_MAXEVENT_EXCEEDED=The maximum number of events that can be retrieved has exceeded
BBU_OPERATION_SETPROP=Set BBU Properties
LDRIVE_OPERATION_7_DESC=Cancels the current initialization operation on the selected virtual disk
PHDRIVE_OPERATION_9_DESC=Identifies a physical disk by blinking the associated physical disk activity LED
BUTTON_CANCEL_TEXT=Cancel
MSG_MAXCONFIG_EXCEEDED=Max Configuration limit exceeded!
ADAPTER_TYPE_ISCSI=Unknown
MENU_RESCAN_TEXT=(R)efresh
BUTTON_MANUALCONF_TEXT=(M)anual Configuration
LABEL_SENSOR_TEXT=Sensor
TEXT_ARRAY_ROW=Row Index
MENU_PLUGINS_TEXT=Plugins
BUTTON_ABORTALL_TEXT=Abort All[A]
ENCL_ELEMSTATUS_OK=OK
BUTTON_LOGIN_TEXT=(L)ogin
USERNAME_TEXT=(U)ser Name:
HOLE_TEXT=Hole
MSG_BIG_LDNAME=Virtual Disk Name is too big!
MENU_GROUPOPERATION_TEXT=(G)roup Operations
BUTTON_CLOSE_TEXT=Close[C]
PROPERTY_SERIALNO_TEXT=Serial No
LOGINMODE_VIEWONLY=View Only
PROPERTY_LDSTATE_TEXT=Virtual Disk State
PROPERTY_MEDIACOUNT_TEXT=Media Error Count
PROPERTY_DISKWRITECACHEDISABLE_TEXT=Disk Write Cache Disable
LDRIVE_STATE_OPTIMAL=Optimal
MSG_LDDELETE_DATA_LOST=Data contained in the virtual drive will be lost. Do you want to continue?
DEV_TAPE_TEXT=TAPE
PDTYPE_SCSI=SCSI
MSG_ADDHOTSPARE_FAILURE=Cannot add Hotspare to the array!
LABEL_BACKGROUNDINIT_TEXT=Background Ini(t)ialization:
CHECKBOX_FASTINIT_TEXT=Fast Initiali(z)ation
PROPERTY_BGIRATE_TEXT=BGI Rate
MSG_CONFIRM_CFGOVERWRITE=This will overwrite the existing configuration. Are you sure?
MANUAL_MODE_LOGICALDRIVE=V(i)rtual Disk Creation
MANUAL_MODE_LOGICALDRIVE_1=Virtual Disk Creation
BUTTON_REMOVEHSP_TEXT=Remove HotSpa(r)e
PROPERTY_HOSTPORTADDRESS_TEXT=Host Port Address
#MENU_HELPME_TEXT=(H)elp
UNUSED_ARRAYS_TEXT=Unused Arrays
LABEL_PATROL_CONTINUOUS=(C)ontinuous Patrolling
BBU_CURRENT_STATUS=Current
SELECT_RAID_LEVEL_TEXT=New (R)AID Level
BBU_RELCHARGE_STATE=Relative State of Charge
PROPERTY_LDFAILEDCOUNT_TEXT=Failed Virtual Disk Count
MSG_NO_OP_SELCTED=Please select an operation !
ADAPTER_OPERATION_6_DESC=Starts Patrol Read operation on the selected physical drives
LABEL_VOLUMENAME_TEXT=Volume (N)ame :
ARRAY_TEXT=Array
MSG_LDINIT_DATA_LOST=Initialization will result in data loss on the selected Virtual Disk(s). Proceed ?
PROPERTY_LDRIVENAME_TEXT=Name
MSG_FAIL_ADD_CONFIG=Add configuration failed
#MENU_ABOUT_TEXT=(A)bout
MSG_NOMORE_ARRAY=No more array can be created : Maximum Number is :
OPERATION_CLEAR_TEXT=Clear
ENCL_ELEMSTATUS_NOT_AVAILABLE=Not Available
OPERATION_CC_TEXT=Check Consistency
LDRIVE_OPERATION_8_DESC=Defines virtual disk operation parameters
PROPERTY_FANNUMBER_TEXT=Number of Fans
ADAPTER_OPERATION_8=Set Ad(j)ustable Task Rates
PROPERTY_HOSTIP_TEXT=IP Address
ADAPTER_OPERATION_7=Stop (P)atrol Read
PORT_TEXT=Port
ADAPTER_OPERATION_6=Start (P)atrol Read
MSG_DELARRAY_FAILED=Cannot delete new Array: Unknown Exception!
ADAPTER_OPERATION_5=Set Patrol (R)ead Properties
ADAPTER_OPERATION_4=Update C(o)ntroller Firmware
ADAPTER_OPERATION_3=(S)ilence Alarm
VERSIONINFO_LABEL_TEXT=Version Information
ADAPTER_OPERATION_2=Disable (A)larm
MSG_STATUS_MODESEL=Select one of the modes of configuration
ADAPTER_OPERATION_1=Enable (A)larm
ENCL_ELEMSTATUS_CRITICAL=Critical
MSG_PDPROGRESS_TEXT=Ongoing Operations on Physical Drives
PHYSICAL_TAB_TEXT=Physical
MSG_ARRAYCREATIONIR_FAILED=Cannot create new Array: At least 2 physical drives needed!
PROPERTY_NVRAMSIZE_TEXT=NVRAM Size
MSG_MAXPDINARRAY_EXCEEDED=No more Physical Drive can be added to this array: Maximum Number is:
LABEL_DISKCACHEPOLICY_TEXT=Dis(k) Cache Policy:
PROPERTY_PRODUCTNAME_TEXT=Product Name
HOUR_TEXT=hour
LABEL_SORTBY_TEXT=(S)ort By
AVAILABLE_DRIVES_TEXT=(A)vailable Drives
LABEL_IPADDRESS_TEXT=IP Address
LABEL_SIZE_TEXT=Si(z)e:
SELARRAY_DEDICATEDHSP_TEXT=Select arrays
LABEL_RECONRATE_TEXT=Reconstru(c)tion Rate
BBU_CYCLE_COUNT=Cycle Count
BUTTON_BACK_TEXT=(B)ack
IBBU_TEXT=IBBU
DEV_CDROM_TEXT=CDROM
DEV_OPTICAL_DRIVE_TEXT=Optical Drive
MSG_DEVNOT_RESPONDING=Device not responding!
HOTSPARE_TEXT=HotSpare Physical Drive
MSG_STATUS_AUTOCONFIG=Select modify to make desired changes to auto configuration parameters or Select Finish to complete Auto Configuration Wizard.
MSG_LINUX_SCSIMAP_FAILED=The SCSI device to SCSI address mapping failed
BBU_AUTOLEARN_PERIOD=Auto Learn Period
MSG_DELETLD_FAILED=Cannot delete newly created Virtual Disk: Unknown Exception!
MSG_PDREMOVEHSP_CONFIRM=Warning: This will remove the hotspare drive! Are you sure?
MSG_MUTEX_CREATE_FAILED=Mutex creation failed
MSG_NOADMIN_RIGHT=This user does not have Administrator right for this system!
PD_STATE_ONLINE=Online
LABEL_VOLUMEID_TEXT=Volume I(D):
LABEL_REBUILDRATE_TEXT=Reb(u)ild Rate
PROPERTY_LDONLINECOUNT_TEXT=Online Virtual Disk Count
PHDRIVE_OPERATION_9=Start (L)ocating Drive
PHDRIVE_OPERATION_8=Stop Re(b)uild
PHDRIVE_OPERATION_7=Start Re(b)uild
PHDRIVE_OPERATION_6=(M)ark Drive as Missing
COMBO_SELECTLDRIVE_TEXT=-- Select Virtual Disk (VD) --
PHDRIVE_OPERATION_5=Re(p)lace Missing Drive
PHDRIVE_OPERATION_4=Stop (P)atrol Read
PHDRIVE_OPERATION_3=Start (P)atrol Read
PHDRIVE_OPERATION_2=Make Drive (O)ffline
PHDRIVE_OPERATION_1=Make Drive (O)nline
PHDRIVE_OPERATION_16=Disable (W)rite Cache
PHDRIVE_OPERATION_17=Enable (W)rite Cache
ADAPTER_OPERATION_7_DESC=Stops the current Patrol Read operation
MSG_NOMORE_ARRAY_INONESHOT=No additional arrays may be created in this configuration.
LABEL_FILETYPE_ROM=ROM Files (*.rom)
POSTPONELEARN_DELAY_TEXT=Postpone Learn Delay Interval (hours):
MSG_CONFIG_OS_DRIVE_PRESENT=This configuration contains at least one OS drive. Configuration cannot be cleared.
MSG_OS_LD=This is an OS drive. This virtual drive cannot be deleted.
PROPERTY_ENCLOSURE_TYPE_TEXT=Enclosure Type
PROPERTY_ENCLOSURE_TYPE_VIRTUAL=Virtual
MSG_NEW_VERSION=and the new version is
MENU_ADD_CONFIG=(L)oad Configuration
MENU_SAVE_CONFIG=Save Conf(i)guration
MENU_CLEAR_CONFIG=(C)lear Configuration
OPERATION_SELECTION_TEXT=Selected Operation :
OPERATION_DESC_TEXT=Description :
LDRIVE_OPERATION_1=(D)elete Virtual Drive
LDRIVE_OPERATION_2=Start (L)ocating Virtual Drive
LDRIVE_OPERATION_3=Stop (L)ocating Virtual Drive
MSG_RECONS_ERR_UNKNOWN=Reconstruction failed : Unknown error
MSG_PD_TYPE_WRONG=The operation cannot start because the type of drive you selected cannot be mixed with drives of another type.
MSG_SAS_SATA_MIX_NOT_ALLOWED=Configuration is not possible with SAS/SATA mixed drives. Please select same types of drive to add into this array.
TXT_DAYS= Days
RECON_DRIVE_ADD_MESSAGE=<HTML>Select drive(s) that you want to add to the volume.<BR>You may select a maximum of {0,number} drive(s)</HTML>
RECON_DRIVE_REMOVE_MESSAGE=<HTML>Select drive(s) that you want to remove from the volume.<BR>You may select a maximum of {0,number} drive(s)</HTML>
MSG_CLEARCONFIG_CONFIRM=Clearing the configuration will destroy virtual disks and result in data loss on the selected controller. Proceed ?
QUICK_INIT_TEXT=Fast Initialization
NO_INIT_TEXT=No Initialization
MSG_CONFIRM_LDRECLAIM=This will delete the newly created Virtual Disk! Are you sure?
AUTOLEARN_MODE_TEXT=Auto Learn Mode:
AUTO_LEARN_WARN=Warn
AUTO_LEARN_MODE=Auto Learn Mode
TXT_PROGRESS_HRS= Hrs
TXT_PROGRESS_MIN= Min
TXT_PROGRESS_SEC= Sec
ZCR_LEGACY_TEXT=ZCR Legacy
MSG_WRITE_BACK_WARN=Write-through is recommended for maximum data integrity when no battery is present !
MSG_COMPONENT_NOT_RUNNING_ERROR=Error : One or more target component is not running.
MSG_CONFIGURATOR_NOT_RESPONDING_ERROR=Error : Configurator not responding.
MSG_CONFIGURATOR_INVALID_OPERATION_ERROR=Error : Invalid operation.
MSG_CONFIGURATOR_OPERATION_FAILED_ERROR=Error : Operation failed.
MSG_CONFIGURATOR_EXCEPTION_ERROR=Error : Unknown exception.
BUTTON_YES_TEXT=(Y)es
BUTTON_NO_TEXT=(N)o
CONFIRM_TEXT=(C)onfirm
SPLASH_MSG_GUI_STARTING=Starting Vivaldi GUI...
SPLASH_MSG_CONNECT_FRAMEWORK=Connecting Server
SPLASH_MSG_WAIT=please wait...
SPLASH_MSG_LOADING_PLUGIN=Loading
SPLASH_MSG_ADAPTER_FOUND=Scanning Adapter...
SPLASH_MSG_LOGIN_FULL_ACCESS_REQUEST=Logging in with 'Full Access' mode...
SPLASH_SCREEN_LOGIN_VIEW_ONLY_REQUEST=Logging in with 'View Only' mode...
SERVERIP_TEXT=Server :
AUTOCONF_DESC_TEXT=Auto configuration is the quickest and simplest way to create a new storage configuration. Selecting this mode, the Configuration Wizard creates the best possible using the available physical disks with minimum user interactions.
MANUALCONF_DESC_TEXT=Manual Configuration provides a fully flexible way create a new storage configuration. This is specially designed for advanced user with in-depth knowledge of storage configuration. Selecting this mode, the Configuration Wizard will let the user to create desired configuration with available disk drives.
GUIDEDCONF_DESC_TEXT=Guided Configuration provides an easy way to create a new storage configuration. Based on the information that is provided during different steps, the Configuration Wizard uses the available disk drives to create an optimal storage configuration.
BUTTON_SELECTPRIMARYDISK_TEXT=Change Primary Disk
MSG_ERR_PRIMARY_DISK_CHANGE=Failed to change Primary Disk !
TITLE_SELECT_PRIMARY_DISK=Select Primary Disk
BUTTON_SELECTPRIMARYDISK_TEXT=Change Primary Disk
MSG_SELECT_PRIMARY_DISK=Please select one disk as Primary Disk !
MENU_TOOLS_TEXT=(T)ools
MENU_CONFIGURE_TEXT=(C)onfigure Alert Settings
PROPERTY_FWPKGVERSION_TEXT=Firmware Package Version
MSG_OS_LD_INIT=This is an OS drive. This virtual drive cannot be initialized.
VD_WR_POLICY_BAD_BBU=(U)se Write Through for failed or missing battery
ENCLOSURE_ID_TEXT=ID
LOGGERHEADER_SEQUENCENO_TEXT=ID
MSG_APP_DEGRADE=Incompatible Controller. Old firmware is being used.
MSG_APP_UPGRADE=Application needs to be upgraded to support this controller.
PROPERTY_MUXSETTING_TEXT=MUX Setting : Quad
PROPERTY_MUXMODE_AUTO_TEXT=Auto
PROPERTY_MUXMODE_EXT_TEXT=External
PROPERTY_MUXMODE_INT_TEXT=Internal
MSG_WARNING_DIALOG=Do you want to close the window ?
RECON_CHANGE_RAID_TEXT=Change RAID Level provides a way to reconstruct the existing storage configuration. No drive additions or deletions are required from the existing configuration. This has been done by changing the RAID Level only.
RECON_DELETE_TEXT=Remove drive provides a way to reconstruct the existing storage configuration. This has been by removing physical drives from the configuration.
RECON_INSERT_TEXT=Add drive provides a way to reconstruct the existing storage configuration by adding new physical drives.
PROPERTY_ENCLPOSITION_TEXT=Enclosure Position
PROPERTY_ENCLCONNINDEX_TEXT=Enclosure Connector Index
TITLE_SELECT_HOTSPARE_AFFINITY=Select affinity option
MSG_SELECT_AFFINITY_OPTION=Please select affinity option !
MSG_NO_AFFINITY_OPTION=(N)o Affinity
MSG_WITH_AFFINITY_OPTION=(W)ith Affinity
BADBBU_PRE=Yes
BADBBU_ABS=No
PROPERTY_BADBBUPOLICY_TEXT=Write Through for failed/missing battery
PD_STATE_HOTSPARE_DEDICATED=Dedicated
PD_STATE_HOTSPARE_GLOBAL=Global
PD_STATE_HOTSPARE_AFFINITY=Affinity
MSG_MAX_LEARN_DELAY_EXCEEDED=Postpone Learn Delay Interval must not be greater than 7 Days !
WRITEPOLICY_WRITE_CACHE=Write Cache
EXPANDER_TEXT=Expander
RAID_LEVEL_6_DISPLAY_STRING=RAID 6
RAID_LEVEL_4_DISPLAY_STRING=RAID 4
LD_STRIPE_SIZE_512=512 Byte
LD_STRIPE_SIZE_1K=1 KB
LD_STRIPE_SIZE_2K=2 KB
LD_STRIPE_SIZE_4K=4 KB
LD_STRIPE_SIZE_8K=8 KB
LD_STRIPE_SIZE_16K=16 KB
LD_STRIPE_SIZE_32K=32 KB
LD_STRIPE_SIZE_64K=64 KB
LD_STRIPE_SIZE_128K=128 KB
LD_STRIPE_SIZE_256K=256 KB
LD_STRIPE_SIZE_512K=512 KB
LD_STRIPE_SIZE_1M=1 MB
LD_STRIPE_SIZE_2M=2 MB
LD_STRIPE_SIZE_4M=4 MB
MSG_RESOLUTION_NOT_SUPPORTED=System resolution not supported !
MSG_CLEAR_FOREIGN_CONFIG_SUCCESS=Foreign Configuration Cleared Successfully !
MSG_CLEAR_FOREIGNCFG_SUCCESS_RESCAN=<html>Foreign Configuration was cleared successfully.<br>More foreign configurations were detected.<br>Would you like to re-scan for foreign configurations?<br><br></html>
MSG_IMPORT_FOREIGNCFG_SUCCESS_RESCAN=<html>Foreign Configuration was imported successfully.<br>More foreign configurations were detected.<br>Would you like to re-scan for foreign configurations?<br><br></html>
MSG_LDINIT_REFRSH_VD=VD list is not updated! Do you want to update?
MSG_MAX_SELECTED_ARRAYS=Dedicated Hotspare can't be created for more than 16 arrays !
MSG_TXTLOGFILE_HEADER= Event Log - Generated on
MSG_TXTFILE_ID=ID =
MSG_TXTFILE_SEQNUM=SEQUENCE NUMBER =
MSG_TXTFILE_TIME=TIME =
MSG_TXTFILE_LOCALIZEDMSG=LOCALIZED MESSAGE =
MENU_LOGSAVE_TEXT_FORMAT=Save as (T)ext
MSG_EXECUTION_FRE_NOZERO_VAL=Execution frequency can't be zero second!
FREQUENCY_TEXT_HOUR=Hour
FREQUENCY_TEXT_MINUTE=Minute
FREQUENCY_TEXT_SEC=Second
ITBBU_TEXT=ITBBU
PROPERTY_ENCLCONNNAME_TEXT=Enclosure Connector Name
PROPERTY_NVDATA_VERSION_TEXT=NVDATA Version
MSG_LOGIN_FAILURE_THRICE=<html>You have exceeded the maximum number of login attempts. <br> Please contact the administrator.
ADAPTER_OPERATION_12=Set Consistenc(y) Check Properties
MSG_CC_ON_ERROR=Stop Consistency Check on Error
MSG_CC_FIX_ERROR=Continue Consistency Check and Fix Errors
ADAPTER_OPERATION_12_DESC=Specify how the consistency check operation should behave when an error is encountered.
PROPERTY_PRODREVLEVEL_TEXT=Product Revision Level
LABEL_SELECT_FILE_TEXT=F(i)le
LABEL_SELECT_VIRTUAL_DISK_TEXT=S(e)lect Virtual Disk
LABEL_ARRAY_TEXT=Available A(r)rays
LABEL_HOTSPARE_TEXT=(H)ot Spare
BUTTON_ADD_TEXT=A(d)d
BUTTON_REMOVE_TEXT=Remo(v)e
VDC_LABEL_READPOLICY_TEXT=Read Polic(y) :
VDC_VD_WR_POLICY_BAD_BBU=Use Write Throu(g)h for failed or missing battery
LABEL_IOPOLICY_TEXT=IO P(o)licy
VDC_LABEL_ACCESSPOLICY_TEXT=A(c)cess Policy :
GUIDED_LABEL_STRIPESIZE_TEXT=(S)tripe Size:
GUIDED_LABEL_READPOLICY_TEXT=(R)ead Policy :
GUIDED_VD_WR_POLICY_BAD_BBU=Use Write (T)hrough for failed or missing battery
GUIDED_LABEL_IOPOLICY_TEXT=I(O) Policy
GUIDED_LABEL_ACCESSPOLICY_TEXT=Access (P)olicy :
GUIDED_LABEL_DISKCACHEPOLICY_TEXT=Disk Cache Polic(y) :
GUIDED_LABEL_INITSTATE_TEXT=Init St(a)te :
BUTTON_CLOSE=Cancel
GRPINIT_CHECKBOX_FASTINIT_TEXT=(F)ast Initialization
LABEL_DRIVES=Unconfig(u)red Drives
VDC_LABEL_ARRAY_TEXT=A(r)rays
RECON_PROPERTY_LDRIVENAME_TEXT=(N)ame
RECON_PROPERTY_IOPOLICY_TEXT=IO Policy
LABEL_NEWVIRTUALDISK_TEXT=New Virt(u)al Disk
LABEL_HEALTH_TEXT=Health
LABEL_SERVER_TEXT=Ser(v)ers
PROPERTY_IOPOLICY_TEXT_2= IO Policy
LABEL_FOREIGN_STATE_TEXT=Foreign
FOREIGN_CONFIG_MAX_LIMIT_EXIT_MSG=<html>The number of foreign configurations detected exceeds the number that can be displayed.<br> Import or clear the configurations that are displayed <br>and then scan for foreign configurations again.</html>
LABEL_FILETYPE_FWFLASH=Firmware Flash Files(*.rom,*.fw)
NOIMPORTABLE_VD_MSG_1=Cannot import virtual disk:\nOne or more drives are missing.\nInsert the missing drive(s) and re-scan.
NOIMPORTABLE_VD_MSG_2=Cannot import virtual disk:\nOne or more spans are missing.\nInsert the missing drive(s) and re-scan.
NOIMPORTABLE_VD_MSG_3=Cannot import virtual disk:\nExceeded number of virtual drives allowed.\nRemove some of the existing virtual disks and re-scan.
NOIMPORTABLE_VD_MSG_4=Cannot import virtual disk:\nUnsupported Configuration. Clear the configuration \nor return the drive(s) to the original controller.
NOIMPORTABLE_VD_MSG_5=Cannot import virtual disk:\nOutdated drive data. Insert the missing drive(s) and re-scan.
NOIMPORTABLE_VD_MSG_6=Import warning: \nPossible outdated drive data.\nInsert the missing drive before importing the configuration.\nImporting the virtual disk without the missing drive may result in data loss.
NOIMPORTABLE_VD_MSG_7=Cannot import physical drive: Configuration conflict. The drive’s place may have been taken by another drive,\nit could be part of another configuration, or the drive’s configuration may be incompatible.\nIm,port or clear any other configurations that exist \nand then re-scan or return the drive to the original controller.
NOIMPORTABLE_VD_MSG_8=Cannot import virtual disk: One or more drives are orphan. Insert the missing drive(s) and re-scan.
NOIMPORTABLE_VD_MSG_9=Cannot import virtual disk: R1E is not supported on this controller.
FOREIGN_CFG_GUID_COMBO_LABEL=Select Confi(g)uration
FOREIGN_CFG_GUID_TREE_LABEL=Configuration (P)review
BUTTON_CLEAR_CONFIG=Clea(r)
BUTTON_IMPORT_CONFIG=I(m)port
BUTTON_CANCEL_FOREIGN_CONFIG=(C)lose
MSG_FOREIGN_DESC_TEXT=Details
MSG_CLEAR_FOREIGN_CONFIG=<html>This operation will remove the selected foreign configuration.<br> Are you sure you want to continue?</html>
MSG_IMPORT_FOREIGN_CONFIG=<html>This operation cannot be reversed after it is started.<br>Are you sure you want to import the configuration?</html>
FOREIGN_MSG_REBUILD_PENDING=Rebuild Pending
ADAPTER_OPERATION_11=Schedule Co(n)sistency Check
ADAPTER_OPERATION_11_DESC=Establish schedule for consistency check operation.
CTRL_OP_CC_RUN_TEXT=Run (c)onsistency check:
CTRL_OP_CC_OPTION_HOURLY=Hourly
CTRL_OP_CC_OPTION_DAILY=Daily
CTRL_OP_CC_OPTION_WEEKLY=Weekly
CTRL_OP_CC_OPTION_MONTHLY=Monthly
CTRL_OP_CC_OPTION_DISABLE=Disable
CTRL_OP_CC_RUN_CONTINUOUS_TEXT=R(u)n consistency check continuously
CTRL_OP_CC_START_DATE_TEXT=Sta(r)t on:
MONTH_JANUARY_TEXT=January
MONTH_FEBRUARY_TEXT=February
MONTH_MARCH_TEXT=March
MONTH_APRIL_TEXT=April
MONTH_MAY_TEXT=May
MONTH_JUNE_TEXT=June
MONTH_JULY_TEXT=July
MONTH_AUGUST_TEXT=August
MONTH_SEPTEMBER_TEXT=September
MONTH_OCTOBER_TEXT=October
MONTH_NOVEMBER_TEXT=November
MONTH_DECEMBER_TEXT=December
CTRL_OP_CC_START_TIME_TEXT=Start ti(m)e:
TIME_AM_TEXT=AM
TIME_PM_TEXT=PM
TEXT_NOT_AVAILABLE=Not available
MSG_EXTERNAL_LUNCH_TIMEOUT=Login failed : Due to timeout!
MSG_LDCC_NOT_INIT=<html>The virtual disk has not been initialized. Running a consistency check may result in<br> inconsistent messages in the log. Are you sure you want to continue?<html>
MSG_WRITE_CACHE_ENABLE_WARNING=<html>You have elected to enable caching for the virtual disk. Data may<br>be lost or corrupted in the event of a sudden power lost when<br>caching is enabled on a volume with mirroring properties.<br>Are you sure you want to enable caching?</html>
MSG_MAX_LEARN_DELAY_INVALID_NUMBER=Invalid Postpone Learn Delay Interval. Postpone Learn Delay Interval cannot be negative or Zero.
MSG_MAX_LEARN_DELAY_CONTAINS_NON_NUMERIC_VALUES=Invalid Postpone Learn Delay Interval. Postpone Learn Delay value cannot contain non numeric characters.
ABOUT_OKBUTTON_TEXT_DSC=OK
BUTTON_OPERATION_GO_DSC=Go
BUTTON_BROWSE_TEXT_DSC=Browse
LOGINMODE_DSC=Mode
ARRAY_LIST_DSC=Array List
PHYSICAL_DRIVE_DSC=PHYSICAL DRIVE
AUTOLEARN_MODE_DSC=Auto Learn Mode
OPMODE_DSC=Operation Mode
READ_POLICY_DSC=Read Policy
ACCESS_POLICY_DSC=Access Policy
DISKCACHE_POLICY_DSC=Disk Cache Policy
IO_POLICY_DSC=IO Policy
BACK_GROUNDINIT_DSC=Background Initialization
CTRL_OP_CC_OPTION_DSC=Consistency Check Opertaion Mode
LOGICAL_DRIVE_DSC=Logical Drive
BUTTON_SELECTALL_DSC=Select All
BUTTON_DESELECTALL_DSC=Deselect All
BUTTON_CC_START_DSC=Consistency Check Start
BUTTON_CLOSE_DSC=Close Consistency Check Operation
BUTTON_CLOSE_DSC_1=Close Intialization Operation
BUTTON_CLOSE_DSC_2=Close progress window
GRPINIT_CHECKBOX_FASTINIT_DSC=Fast Initialization
BUTTON_INIT_START_DSC=Intialization Start
CHECKBOX_FASTINIT_DSC=Fast Initialization
CHECKBOX_PATROL_CONTINUOUS_DCS=Continuous Patrolling
CHECKBOX_DOMAIN_ADDR_DSC=Remote server at IP address"
CHECKBOX_BAD_BBU_DSC=Bttary Backup Unit
CHECKBOX_CC_RUN_CONTINUOUS_DSC=consistency check continuously
ABOUT_SERVERINFO_DSC=Server Info
BUTTON_ABORTALL_DSC=Abort All
BUTTON_UPDATE_DSC=Update
BUTTON_CONNECT_DSC=Connect
BUTTON_CANCEL_DSC=Cancel
MAXPD_COUNT_DSC=Maximum PD Count for patrolling
LABEL_SELECTLD_DSC=Select Excluded Virtual Disks
FREQUENCY_HOUR_DSC=Execution Frequency Hours
FREQUENCY_MIN_DSC=Execution Frequency Minutes
FREQUENCY_SEC_DSC=Execution Frequency Seconds
REBUIL_DRATE_DSC=Rebuild Rate
PATROL_READRATE_DSC=Patrol Rate
BGI_RATE_DSC=BGI Rate
CC_RATE_DSC=Check Consistency Rate
RECON_RATE_DSC=Reconstruction Rate
USER_NAME_DSC=Enter Host User Name
PASSWORD_DSC=Enter Host Password
FILE_NAME_DSC=Enter Or Select File Name
POSTPONELEARN_DELAY_DSC
LD_NAME_DSC=Logical Drive Name
SERVER_SORT_DSC=Server Sorting
HOTSPEAR_ARRAY_DSC=Hotspear Array
INIT_STATE_DSC=Intialization Stage
AUTO_MODE_DSC=Auto Mode
STRIPE_SIZE_DSC=Stripe Size
READ_POLICY_DSC=Read Policy
DISK_CACHEPOLICY_DSC=Disk Cache Policy
WRITE_POLICY_DSC=Write Policy
CACHE_POLICY_DSC=Cache Policy
ACCESSPOLICY_DSC=Access Policy
INITSTATE_DSC=Initialization State
BBU_DSC=Battary Backup Unit Check
ARRAYCMB_DSC=Array Combination
RAID_LEVEL_DSC=RAID Level
BUTTON_ADD_DSC=Add
BUTTON_REMOVE_DSC=Remove
ACCEPT_ARRAY_DSC=Accept
BUTTON_REMOVEHSP_DSC=Remove HotSpare
BUTTON_MODIFY_DSC=Modify
BUTTON_ACCEPT_DSC=Accept
BUTTON_SELECTPRIMARYDISK_DSC=Change Primary Disk
BUTTON_RECLAIM_DSC=Reclaim
BUTTON_CLEAR_CONFIG_DSC=Clear
BUTTON_IMPORT_CONFIG_DSC=Import
BUTTON_CANCEL_FOREIGN_CONFIG_DSC=Close
VOLUMENAME_DSC=Volume Name
MSG_WITH_AFFINITY_DSC=With Affinity
MSG_NO_AFFINITY_DSC=No Affinity
MSG_CC_FIX_ERROR_DSC=Continue Consistency Check and Fix Errors
MSG_CC_ON_ERROR_DSC=Stop Consistency Check on Error
REDUNDANCY_ONLY_DSC=Redundancy Only
REDUNDANCY_TRY_DSC=Redundancy when possible
EXISTINGARRAY_ONLY_DSC=Use Existing Arrays Only
REDUNDANCY_NO_DSC=No Redundancy
NO_EXISTINGARRAY_DSC=Don't use Existing Arrays
BUTTON_AUTOCONF_DSC=Auto Configuration
BUTTON_MANUALCONF_DSC=Manual Configuration
BUTTON_GUIDEDCONF_DSC=Guided Configuration
RECON_INSERT_BUTTON_DSC=Add Drive
RECON_DELETE_BUTTON_DSC=Remove Drive
RECON_NOCHANGE_BUTTON_DSC=Change RAID Level
MSG_NO_AFFINITY_OPTION=(N)o Affinity
MSG_WITH_AFFINITY_OPTION=(W)ith Affinity
##Copyback resource strings
REPLACING_PHYSICAL_DRIVE=Replacing Physical Drive
COPY_BACK_IN_PROGRESS=Copyback in progress
REPLACING_WITH_PHYSICAL_DRIVE=Replacing with Physical Drive
OPERATOIN_COPYBACK_TEXT=Replace With
COPY_BACK_OP_TEXT=(R)eplace Physical Drive
COPYBACK_OP_DESC=Replaces the physical drive and copies the data to the selected component.
MSG_REPLACE_BY=will be\nreplaced by
COPYBACK_STARTED_CHECK_PROGRESS=This may take some time. Go to the show\nprogress option to view the progress of this\nreplacement or abort the operation.
## Multipathing resource strings
PROP_PDREDUNDANTPATH_TEXT=Redundant Paths
PROPERTY_YES_TEXT=Yes
PROPERTY_NO_TEXT=No
## FRU
PROPERTY_FRU_TEXT=FRU
## 16 to 64 VDs per array support.
CONFIRM_64_VDS_DDF_PARTITION=Following this operation, your storage configuration \nwill contain more than 16 virtual disks.While supported \nby your system, the configuration may not be compatible \nwith other systems that support a maximum of 16 virtual \ndisks per array.Proceeding with this operation may prevent \nyou from moving your configuration to an incompatible system\n Are you sure you want to continue?
#CR 69055: Add the ability to make UNCONFIGURED_BAD to UNCONFIGURED_GOOD
PHDRIVE_STATE_CHANGE_OP=Change to (U)nconfigured Good
PHDRIVE_STATE_CHANGE_OP_DESC=Changes the drive state to Unconfigured Good
PROPERTY_FWENCLVER_TEXT=Enclosure FW Version
ABOUT_CC_ADVANCED_BUTTON_TEXT=Advanced
MSG_CCSCHEDULE_DATE=The specified date occurs in the past
MSG_CCDRIVE_TEXT=Virtual Disks
CCADVANCED_VDSTOCHECK_TEXT=Select virtual disks to check:
MSG_CCMODE_TEXT=Mode
CCADVANCED_SEQUENTIAL_MODE_TEXT=Sequential: Check virtual disks one at a time (slower but less performance impact).
CCADVANCED_CONCURRENT_MODE_TEXT=Concurrent: Check all selected virtual disks at once (faster but lowers performance).
SCHEDULE_CC_ADVANCED=Schedule Consistency Check - Advanced
CCADVANCED_CHECK_MODE_TEXT=Consistency check (m)ode:
CTRL_BUTTON_CC_ADVANCED_DSC=Consistency Check Advanced Window
PROPERTY_CONNECTOR_TEXT=Connector
PROPERTY_POSITION_TEXT=Position
LABEL_ENABLE_AUTO_LEARN=En(a)ble
AUTO_LEARN_ENABLED=Enabled
BBU_OPERATION_REFRESH_PROPERTIES=(R)efresh Properties
BBU_OPERATION_START_LEARN=(S)tart Learn Cycle
BBU_OPERATION_SET_LEARN_PROP=Set Learn Cycle (P)roperties
BBU_OPERATION_SET_LEARN_PROP_DESC=Sets the learn cycle properties for the battery backup unit
LABEL_DISABLE_AUTO_LEARN=Disa(b)le
DELAY_SCHEDULED_LEARN_CYCLE_TEXT = (D)elay scheduled learn cycle by:
SCHEDULED_LEARN_CYCLE_TEXT = Scheduled learn cycle:
BBU_NOTE = (Note: Please enter a value between 0 to 168 hours.)
AUTO_LEARN_TEXT=Automatic Learn Cycles:
LABEL_REMIND_LEARN=Re(m)ind me when to start a learn cycle
ADAPTER_OPERATION_13=Copyback on SMART alert
PROPERTY_SMART_CB_ENABLED=Enabled
PROPERTY_SMART_CB_DISABLED=Disabled
FIRMWARE_UPDATE_TEXT=Firmware to update:
CONTROLLER_FIRMWARE_TEXT=Co(n)troller firmware
CURRENT_VERSION_TEXT=Current version:
#BIOS_TEXT=BIO(S)
FIRMWARE_FILE_NOT_FOUND=The specified file could not be found. Please check the file path and try again.
#NCQ update
PROPERTY_NCQSTATUS_TEXT=Native Command Queuing
PROPERTY_NCQ_ENABLED=Enabled
PROPERTY_NCQ_DISABLED=Disabled
MSG_INCOMPLETE_FOREIGN_CFG=Incomplete Foreign Config.
TITLE_FOREIGN_CONFIG_DETECTED=Foreign Configuration Detected
BUTTON_IMPORT_LABEL=I(m)port: Import logical configuration from all foreign drives.
BUTTON_CLEAR_LABEL=(C)lear: Remove logical configuration from all foreign drives.
BUTTON_ADVANCED_LABEL=(A)dvanced: Preview, import and clear specific foreign configurations.
MESSAGE_FOREIGN_CONFIG_DETECTED=<html>Foreign drives were detected. You must import or clear these<br>drives before they can be used.<br><br></html>
LABEL_CHOOSE_AN_OPTION=Choose an option:
MSG_CLEAR_FOREIGN_CONFIG=<html>This operation will remove the foreign configuration.<br>Are you sure you want to continue? </html>
TITLE_FOREIGN_CONFIG_CLEARED=Clear Successful.
MSG_FOREIGN_CONFIG_CLEARED=The foreign configuration was cleared successfully.
MSG_LABEL_PREVIEW=(P)review
ENCL_POSITION_TEXT=Position
ENCL_SLOT_TEXT=Slot
ENCL_BACKPLANE_TEXT=Backplane
DRIVE_GROUP_TEXT=Drive Group
VIRTUAL_DRIVES_TEXT=Virtual Drives
VIRTUAL_DRIVE_TEXT=Virtual Drive
DRIVES_TEXT=Drives
DEDICATED_HOT_SPARES_TEXT=Dedicated Hot Spares
TOTAL_FREE_CAPACITY_TEXT=Total Free Capacity
CAPACITY_TEXT=Capacity
GLOBAL_HOT_SPARES_TEXT=Global Hot Spares
UNCONFIGURED_DRIVES_TEXT=Unconfigured Drives
SPANNED_DRIVE_GROUP_TEXT=Spanned Drive Group
SPAN_TEXT=Span
PROPERTY_ENCLOSUREID_TEXT=Enclosure ID
PROPERTY_ENCLOSUREMODEL_TEXT=Enclosure Model
PROPERTY_ENCLLOCATION_TEXT=Enclosure Location
PROPERTY_USABLE_CAPACITY_TEXT=Usable Capacity
PROPERTY_STATUS_TEXT=Status
PROPERTY_RAW_CAPACITY_TEXT=Raw Capacity
PROPERTY_TYPE_TEXT=Type
PROPERTY_SOLID_STATE_DRIVE_TEXT=Solid State Drive
PROPERTY_DRIVE_TYPE_TEXT=Drive Type
SSD_TEXT=SSD
HOURS=hours
DEDICATED_HSP_DESC = <html>A dedicated hot spare will only replace problematic drives on \
selected drive groups.<br><br></html>
##################################################################
#### BLACK ROCK Changes ##
##################################################################
#### Controller & FDE Encryption - Configuration Management ##
PROPERTY_SECURED_TEXT = Secured
PROPERTY_DRV_SECURITY_METHOD_TEXT = Drive security method
PROPERTY_FDE_CAPABLE_TEXT = Full Disk Encryption capable
PROPERTY_DRV_SECURITY_CAPABLE_TEXT = Drive security capable
PROPERTY_DRV_SECURITY_ENABLED_TEXT = Drive security enabled
PROPERTY_DRV_SECURITY_DISABLED_TEXT = Drive security disabled
DESC_ENCR_METHOD_FDE = FDE Only
DESC_ENCR_METHOD_FDE_AND_CTRL = FDE and Controller-based
PROPERTY_DRIVE_SECURITY_METHOD = Drive security method
DESC_ENCRYPTION_METHOD_FDE = Full disk encryption
DESC_ENCRYPTION_METHOD_CTRL = Controller-based encryption
LABEL_ENCRYPTION_TEXT = En(c)ryption :
TEXT_FDE_WHEN_POSSIBLE = FDE when possible
TEXT_CONTROLLER_BASED = Controller-based only
TEXT_NO_ENCRYPTION = No Encryption
LABEL_ENCRYPTION_GROUP = Encryption
LABEL_USE_FDE_WHEN_POSSIBLE = Use (f)ull disk encryption when possible
LABEL_USE_CTRL_BASED_ENCRYPTION = Use (c)ontroller based encryption only
LABEL_NO_ENCRYPTION = No encr(y)ption
LABEL_USE_FDE = Use (f)ull disk encryption
SELECT_ENCRYPTION_METHOD_DIALOG_TITLE = Select Drive Security Method
SELECT_DRIVE_SECURITY_METHOD_DESC = <html>Select the drive security method to use for \
Drive Group {0}.<br><br>Note: Once Drive Group {0} is secured, \
you will not be able to<br>remove the security without deleting \
the virtual drives.<br><br></html>
SELECT_ENCR_METHOD_DESC = <html>Select the encryption method to use for Drive Group
ENCRYPTION_METHOD_NOTE1 = <br><br>Note: Once Drive Group
ENCRYPTION_METHOD_NOTE2 = is encrypted, you will not be able to<br>remove encryption without relocating or \
clearing all virtual drives.<br><br></html>
CONFIRM_FDE_DIALOG_TITLE = Confirm Full Disk Encryption
CONFIRM_FDE_WARN_TEXT = <html>The following global hot spares will not cover drive groups<br>secured using \
Full Disk Encryption (FDE) because they are not<br>capable of FDE. To ensure that \
drive groups secured using FDE<br>are covered, you should use FDE-capable drives \
as global hot<br>spares.<br><br></html>
LABEL_GLOBAL_HOT_SPARES_INCAPABLE_OF_FDE = (G)lobal hot spares incapable of FDE:
ENCRYPTION_WARN_TEXT = <html>Once a drive group is secured, you will not be able to remove the \
security<br>without deleting the virtual drives.<br><br>Are you sure you \
want to use FDE?<br></html>
DRIVES_USING_FDE_DIALOG_TITLE = Cannot Use Secure FDE Drives
DRIVES_USING_FDE_ERROR_DESC1 = <html>The following drives are secured using Full Disk Encryption<br>(FDE). You \
cannot use these drives in a drive group that is not<br>secured using FDE \
until you securely erase the drives or<br>disable drive security on the \
controller.<br><br></html>
DRIVES_USING_FDE_DESC1 = The following drives are currently encrypted using full disk\
\nencryption. You cannot use these drives in a non-FDE drive \
\ngroup until you clear their full disk encryption.
DRIVES_USING_FDE_DESC2 = It is not possible \nto create a configuration without using these drives.
LABEL_FDE_DRIVES = (D)rives using FDE:
CONFIRM_CTRL_ENCR_TEXT = Do you want to continue without using these drives?
CONFIRM_CTRL_ENCRYPTION_DIALOG_TITLE = Confirm Controller Encryption
CTRL_ENCRYPTION_WARN_DESC=<html>One or more drive groups that are capable of Full Disk Encryption<br>(FDE) \
will not be used to their full security capability.<br><br>Once a drive group is \
secured, you will not be able to remove<br>the security without deleting the \
virtual drives.<br><br>Are you sure you want to use controller encryption \
only?<br><br></html>
CTRL_ENCRYPTION_WARN_DESC1 = <html>Drive group {0} is capable of Full Disk Encryption (FDE) \
and will<br>not be used to their full security capability.<br><br>Once a drive group is \
secured, you will not be able to remove<br>the security without deleting the \
virtual drives.<br><br>Are you sure you want to use controller encryption \
only?<br><br></html>
CONFIRM_DRIVE_GROUP_ENCRYPTION_DIALOG_TITLE = Confirm Drive Group Encryption
DRIVE_GROUP_ENCRYPTION_DESC1 = All of the drives in Drive Group
DRIVE_GROUP_ENCRYPTION_DESC2 = will be encrypted using \nfull disk encryption. \n\nOnce drive group
DRIVE_GROUP_ENCRYPTION_DESC3 = is encrypted, you will not be able to \nremove encryption without relocating \
or clearing all virtual \ndrives.\n\nAre you sure you want to use full disk encryption?\n
CONFIRM_CLEAR_FDE_DIALOG_TITLE = Confirm Clear FDE
CLEAR_FDE_DESC1 = When you clear full disk encryption from Drive
CLEAR_FDE_DESC2 = , any data \non Drive
CLEAR_FDE_DESC3 = will be permanently lost. \n\nAre you sure you want to clear Drive
CLEAR_FDE_DESC4 = ?\n
CTRL_PASS_PHRASE_ERROR_DIALOG_TITLE = Controller Password Error
CONTROLLER_TEXT = Controller:
CTRL_PASS_PHRASE_ERROR_DESC = \n\nThere is a problem with the encryption password on \nyour controller that prevents \
access to your drives. \n\nYou must disable and re-enable encryption, and then \
\nscan for a foreign configuration to fix the problem.\n
NON_FDE_GLOBAL_HS_TITLE = Non-FDE Global Hot Spare
NON_FDE_GLOBAL_HS_DESC = <html>This global hot spare will not protect the following \
drive<br>groups because it is not capable of full disk encryption<br>(FDE). \
<br><br>Only hot spares capable of FDE can protect drive groups<br>secured using \
FDE.<br><br></html>
FDE_DRIVE_GRP_LABEL = (F)DE Drive Groups:
NON_FDE_DEDICATED_HS_TITLE = Non-FDE Dedicated Hot Spare
NON_FDE_DEDICATED_HS_DESC = <html>This dedicated hot spare will not protect the following \
drive<br>groups because it is not capable of full disk encryption<br>(FDE). \
<br><br>Only hot spares capable of FDE can protect drive groups<br>secured using \
FDE.<br><br></html>
DRIVE_GRP_LABEL = (D)rive Groups:
CONFIRM_SECURE_DG_TITLE = Confirm Secure Drive Group
CONFIRM_SECURE_DG_DESC = <html>All of the drives in Drive Group {0} will be secured using<br> \
Full Disk Encryption.<br><br>Once a drive group is secured, you will not be able \
to<br>remove the security without deleting the virtual drives.<br><br>Are you \
sure you want to secure Drive Group {1}?</html>
SECURE_USING_FDE = Secure Using (F)DE
SECURE_USING_FDE_DESC = Secures the selected drive group using Full Disk Encryption
#### Key Management, Key Creation, Key Deletion, Key Reprovisioning ##
SELECT_DRIVE_GROUP_DEDHSP_TEXT = (S)elect drive group(s)
LABEL_SUGGESTED_SECURITY_KEY=Sug(g)ested security key:
SUGGESTED_SECURITY_KEY_DIALOG_TITLE = Suggested Security Key
SUGGESTED_SECURITY_KEY_DESC = <html>The security key below was generated by your controller.\
If you choose to use this<br>security key, you will need to confirm it by typing each character as shown.\
You can<br>leave this dialog open while you confirm the security key.<br><br>Be sure to record this security key, as your \
controller will not keep any <br>record of it.<br><br></html>
ENABLE_ENCRYPTION_DESC = <html>When encryption is enabled, data will be secured using a Password.<br>Encryption must \
be enabled to create encrypted virtual drives.<br><br>The Password is case-sensitive.\
It must be between eight and<br>thirty-two characters and contain at least one number, \
one lowercase letter,<br>one uppercase letter, and one non-alphanumeric character \
e.g. ! * @ + #).<br><br>Note: For maximum security, use thirty-two varied characters.</html>
MESSAGE_CANNOT_DISABLE_DRIVE_SECURITY = <html>You cannot disable drive security because one or more secure<br>drive groups are present \
on this controller.<br><br>In order to disable drive security, you must first delete the \
virtual drives on all<br>secure drive groups.<br><br></html>
ERROR_PASSWORD_MISMATCH = The characters entered in the Password field and the confirm\nfield do not match.\n\nPlease re-enter and confirm your Password.
ERROR_INVALID_PASSPHRASE = The Password entered either uses an invalid character or does\nnot meet the minimum security requirements.\n\n\
The Password is case-sensitive. It must be between eight and\nthirty-two characters and contain at least one number, \
one\nlowercase letter, one uppercase letter, and one non-alphanumeric\ncharacter (e.g. < > @ +).\n\n\
The space character is not permitted in the Password.\n\nPlease specify a Password that meets the above requirements.\n\n
ERROR_INVALID_SECURITY_KEY = The security key entered either uses an invalid character or does\nnot meet the minimum security requirements.\n\n\
The security key is case-sensitive. It must be between eight and\nthirty-two characters and contain at least one number, \
one\nlowercase letter, one uppercase letter, and one non-alphanumeric\ncharacter (e.g. < > @ +).\n\n\
The space character is not permitted in the Password.\n\nPlease specify a security key that meets the above requirements.\n\n
ERROR_INCORRECT_PASSPHRASE = The Password entered was incorrect. Please verify your\nPassword and try again.
ERROR_INCORRECT_SECURITY_KEY = The security key entered was incorrect. Please verify your\nsecurity key and try again.
MESSAGE_CONFIRM_CHANGE_SECURITY_SETTINGS = <html>You chose to change the security key identifier | security key | security key<br>identifier \
and security key and not to require<br>an optional Password. It is highly recommended that \
you<br>change the security key identifier whenever you change the<br>security key.<br><br>The existing \
configuration on this controller will be updated to<br>use the new security settings. If you previously \
removed any<br>secured drives, you will still need to supply the old security key<br>to import \
them.<br><br>Are you sure you want to change the drive security settings?<br><br></html>
MESSAGE_CONFIRM_ENABLE_ENCRYPTION = <html>Drive security will be enabled on this controller using the<br>specified \
security key identifier,
LABEL_AND = and
LABEL_OR = or
LABEL_NOT = not
MESSAGE_SECURITY_KEY_ID = security key identifier
MESSAGE_SECURITY_KEY = security key
MESSAGE_PASSPHRASE = Password
MESSAGE_BE_SURE_TO_RECORD = Be sure to record this information.
MESSAGE_SECURITY_KEY_PROMPTED = You may be prompted to<br>enter the security key if you perform certain operations
MESSAGE_SECRET_KEY_REBOOT = you<br>will be prompted to enter the Password every time the server boots.
MESSAGE_FORGOT_SECURITY = If you forgot the {0} {1} {2}you could lose access<br>to your data.</html>
MESSAGE_ARE_YOU_SURE_TO_CHANGE = Are you sure you want to change the drive security settings?
MESSAGE_ARE_YOU_SURE_TO_ENABLE = Are you sure you want to enable the drive security?
MESSAGE_CHOOSE_TO_REQUIRE_PASSPHRASE = You choose to {0}require an optional Password.
MESSAGE_HIGHLY_RECOMMENDED = It is highly recommended that you change the<br>security key \
identifier whenever you change the security key.
MESSAGE_PREV_REMOVE_DRIVES = If you previously removed any<br>secured drives, you will \
still need to supply the old security key<br>to import them.
MESSAGE_CHOOSEN_CHANGE = You choose to change the {0}
MESSAGE_CHOOSEN_PASSPHRASE = choose to {0} require an optional Password
MESSAGE_EXISTING_CONFIG = The existing configuration on this controller will be<br>updated \
to use the new security settings.
MESSAGE_CONFIRM_CHANGE_PASSPHRASE = If you change the Password, the existing configuration on\n\
this controller will be updated to use the new Password. If\n\
you have removed any encrypted drives, they will continue to\n\
use the old Password.\n\nAre you sure you want to change the Password?\n\n
MESSAGE_CONFIRM_DISABLE_ENCRYPTION = If you disable drive security, you will not be able to create any\nnew \
secure virtual drives{0}. Disabling drive security will\nnot \
affect the security or data of foreign drives.\n\nIf you removed any \
drives that were previously secured, you will\nstill need to enter \
the security key when you import them.\nOtherwise, the data contained \
on those drives will not be accessible.\n\nAre you sure you want to disable \
drive security?\n\n
MESSAGE_ALL_FDE_DRIVES_ERASED = and all secure unconfigured FDE\ndrives will be securely erased
MESSAGE_CONFIRM_DISABLE_SECURITY_FDE = and all secure unconfigured FDE drives will be securely erased
ERROR_SECURITY_KEY_MISMATCH = The characters entered in the security key field and the confirm\nfield do not match.\n\nPlease re-enter and confirm your security key.
TITLE_INVALID_PASSPHRASE = Invalid Password
TITLE_INVALID_SECURITY_KEY = Invalid Security Key
TITLE_PASSPHRASE_MISMATCH = Password Mismatch
TITLE_INCORRECT_PASSPHRASE = Incorrect Password
TITLE_ENCRYPTION_ENABLED = Encryption Enabled
TITLE_CONFIRM_PASSPHRASE_CHANGE = Confirm Change Password
TITLE_CONFIRM_DISABLE_DRIVE_SECURITY = Confirm Disable Drive Security
TITLE_CANNOT_DISABLE_DRIVE_SECURITY = Cannot Disable Drive Security
TITLE_AUTHENTICATE_DRIVE_SECURITY_SETTINGS = Authenticate Drive Security Settings
TITLE_INCORRECT_SECURITY_KEY = Incorrect Security Key
TITLE_DRIVE_SECURITY_NEEDED_TO_IMPORT = Drive Security Required to Import
TITLE_CANNOT_IMPORT_LOCKED_DRIVES = Cannot Import Locked Drives
CHANGE_PASSPHRASE_DIALOG_TITLE = Change Password
ENABLE_ENCRYPTION_DIALOG_TITLE = Enable Encryption
TITLE_CONFIRM_ENABLE_DRIVE_SECURITY = Confirm Enable Drive Security
TITLE_CONFIRM_CHANGE_SECURITY_SETTINGS = Confirm Change Security Settings
TITLE_CONFIRM_DISABLE_DRIVE_SECURITY = Confirm Disable Drive Security
TITLE_SECURITY_KEY_MISMATCH = Security Key Mismatch
LABEL_SUGGEST_PASS_PHRASE = Su(g)gest Password
LABEL_SUGGEST_SECURITY_KEY = Su(g)gest Security Key
LABEL_PASS_PHRASE = Pass p(h)rase:
LABEL_CONFIRM = (C)onfirm:
LABEL_CONFIRM_SECURITYKEY = (C)onfirm:
LABEL_CONFIRM_PASSWORD = C(o)nfirm:
LABEL_OLD_PASS_PHRASE = Old (p)ass phrase:
LABEL_USE_PASS_PHRASE = (U)se a Password in addition to the security key
LABEL_CONTROLLER = Controller:
LABEL_ENCRYPTION_STATUS_ENABLED = Drive security is currently enabled.
LABEL_ENCRYPTION_STATUS_DISABLED = Drive security is currently disabled.
LABEL_ENCRYPTED_VIRTUAL_DRIVES = (E)ncrypted Virtual Drives:
TOOL_TIP_PASS_PHRASE = Please enter a valid Password
BUTTON_LABEL_OK = Ok
BUTTON_LABEL_CANCEL = Cancel
BUTTON_LABEL_YES = (Y)es
BUTON_LABEL_NO = (N)o
BUTTON_USE_KEY = (U)se Key
BUTTON_ENABLE_ENCRYPTION = Enable (D)rive Security
BUTTON_CHANGE_PASSPHRASE = Change Sec(u)rity Settings
BUTTON_DISABLE_ENCRYPTION = Disable (D)rive Security
OPERATION_CHANGE_DRIVE_SECURITY = Change Dri(v)e Security
OPERATION_CHANGE_DRIVE_SECURITY_DESC = Changes the controller's drive security settings
LABEL_SECURE_KEY_ID = Security key (i)dentifier:
LABEL_SECURITY_KEY = Security (k)ey:
LABEL_NEW_SECURITY_KEY = New Security (K)ey:
LABEL_OLD_SECURITY_KEY = Old security (k)ey:
LABEL_ENTER_SECURITYKEY_AND_PASSPHRASE = Please enter the current security key and Password.
LABEL_ENTER_SECURITYKEY_ONLY = Please enter the current security key.
LABEL_USE_CURRENT_SECURE_KEY_ID = (U)se the existing security key identifier.
LABEL_CURRENT_SECURITY_KEY_IDENTIFIER = Current security key (i)dentifier:
LABEL_ENTER_NEW_SECURITY_KEY_IDENTIFIER = (E)nter a new security key identifier
LABEL_NEW_SECURITY_KEY_IDENTIFIER = New (s)ecurity key identifier:
LABEL_USE_CURRENT_SECURITY_KEY = Use the e(x)isting drive security key
LABEL_ENTER_NEW_SECURITY_KEY = Enter a new drive securi(t)y key
LABEL_RECORD_SECURITY_SETTINGS = I (r)ecorded the security settings for future reference.
LABEL_CURRENT_SECURITY_KEY = (C)urrent security key:
ENABLE_DRIVE_SECURITY_INTRODUCTION_WIZARD_PAGE_TITLE = Enable Drive Security - Introduction
ENABLE_DRIVE_SECURITY_ENTER_SECURITY_KEY_ID_WIZARD_PAGE_TITLE = Enable Drive Security - Enter Security Key ID
ENABLE_DRIVE_SECRUITY_ENTER_SECURITY_KEY_WIZARD_PAGE_TITLE = Enable Drive Security - Enter Security Key
ENABLE_DRIVE_SECURITY_ENTER_PASSPHRASE_WIZARD_PAGE_TITLE = Enable Drive Security - Enter Password
CHANGE_DRIVE_SECURITY_INTRODUCTION_WIZARD_PAGE_TITLE = Change Security Settings - Introduction
CHANGE_DRIVE_SECURITY_ENTER_SECURITY_KEY_ID_WIZARD_PAGE_TITLE = Change Security Settings - Security Key ID
CHANGE_DRIVE_SECURITY_ENTER_SECURITY_KEY_WIZARD_PAGE_TITLE = Change Security Settings - Security Key
CHANGE_DRIVE_SECURITY_ENTER_PASSPHRASE_WIZARD_PAGE_TITLE = Change Security Settings - Password
# Modifed for CR LSIP200010075 start
TITLE_SECURITY_BASED_OPERATION_ENABLE=Enable Drive Security - Enter Security Key Details
TITLE_SECURITY_BASED_OPERATION_CHANGE=Change Drive Security - Change Security Key Details
BUTTON_SECURITY_BASED_OPERATION_ENABLE = E(n)able Drive Security
BUTTON_SECURITY_BASED_OPERATION_CHANGE = (C)hanges Drive Security
TITLE_SECURITY_KEY_ID=Security Key Identifier
TITLE_SECURITY_KEY=Security Key
TITLE_PASSWORD=Password
LABEL_PASSWORD=Pass(w)ord:
LABEL_USE_PASS_BOOT=(P)ause for password at boot time
LABEL_USE_STRONG_PWD=En(f)orce strong password security
ERROR_INVALID_PASSPHRASE_UNSTRONG=The Password entered either uses an invalid character or does\nnot meet the minimum security requirements.\n\n\
The Password is case-sensitive. It must be between eight and\nthirty-two characters. \n\n\
Please specify a Password that meets the above requirements.\n\n
ENTER_SECURITY_KEY_ID_PAGE_DESC=<html>Specify a security key identifier. The controller has provided a default identifier for you. You may <br> \
use this string or enter your own identifier.<br><br> \
If you have multiple security keys, the identifier will help you determine which security key to enter.</html>
ENTER_SECURITY_KEY_PAGE_DESC=<html>The security key will be used to lock each self encrypted drive attached to the controller.<br><br> \
For maximum security, use thirty-two varied characters, you may optionally choose for the system <br> \
to suggest a strong security key.<br><br> \
Note:<br> \
The security key is case-sensitive and must be between eight and thirty-two characters and <br> \
contain at least one number, one lowercase letter, one uppercase letter, and one non- <br> \
alphanumeric character (e.g. >@+). </html>
ENTER_PASSWORD_PAGE_DESC=<html>Optionally, you may enter a pass word to provide additional security. If you choose "Pause for <br> \
password at boot time, you must enter it whenever you boot your server.<br><br> \
Note:<br> \
The password is case-sensitive and must be between eight and thirty-two characters.<br><br> \
If enforce strong password security is selected, then password field should contain at least one <br> \
number, one lower case letter, one uppercase letter, and one non-alphanumeric character <br> \
(e.g. >@+).</html>
ENABLE_DRIVESECURITY_DESC=Enabling drive security on this controller will have the option to create secure virtual drives using a {0}.
CHANGE_DRIVESECURITY_DESC=Drive security is currently enabled. This wizard will guide you through changing the drive security settings on this controller.
DRIVESECURITY_BE_SURE_TEXT = <html>Be sure to record this information. You may be prompted to enter the {0} if you <br>perform certain operations. \
If you forgot the {0}, you could lose access to your data.</html>
# Modifed for CR LSIP200010075 end
ENABLE_DRIVE_SECURITY_INTRO_DESC = <html>This wizard will guide you through enabling drive security on this controller.<br>Once you enable \
drive security, you will have the option to create secure<br>virtual drives using a security key.<br><br>First, \
you will create the security key identifier. This identifier displays<br>whenever you must enter the security \
key. If you have multiple security<br>keys, the identifier will help you determine which security key to \
enter.<br><br>Next, you will create the security key. You may need to enter the security<br>key in order to \
perform certain operations. The controller can suggest a<br>strong security key.<br><br>
ENABLE_DRIVE_SECURITY_INTRO_PASSPHRASE = Finally, you will have the option to create a Password. The \
Password<br>provides additional security. If you choose to \
require a Password, you<br>must enter it whenever you boot your \
server.<br><br>
CHANGE_DRIVE_SECURITY_INTRO_DESC = <html>Drive security is currently enabled. This wizard will guide you through<br>changing the drive security \
settings on this controller.<br><br>First, you will have the option to edit the security key identifier. \
This identifier<br>displays whenever you must enter the security key. If you have multiple<br>security keys, \
the identifier will help you determine which security key to<br>enter.<br><br>Next, you will have the option \
to edit the security key. You may need to<br>enter the security key in order to perform certain operations. \
The controller<br> can suggest a strong security key.<br><br>
CHANGE_DRIVE_SECURITY_INTRO_PASSPHRASE = Finally, you will have the option to add or change the Password. \
The pass<br>phrase provides additional security. If you choose to require a \
Password,<br>you must enter it whenever you boot your server.<br><br>
CHANGE_SECURITY_KEY_ID_PAGE_DESC = <html>Select whether you want to keep the existing drive security key identifier or enter a new one. If <br> \
you have multiple Security keys, the identifier will help you determine which Security key to enter. <br><br> \
Note: If you plan to change the Security key, it is highly recommended that you change the <br>\
security key identifier. Otherwise, you will not be able to differentiate between the Security keys.<br></html>
CHANGE_SECURITY_KEY_PAGE_DESC = <html>Select whether you want to keep the existing drive security key or enter a new one.<br><br> \
For maximum security, use thirty-two varied characters, you may optionally choose for the system <br> \
to suggest a strong security key. <br><br> \
Note:<br> \
The security key is case-sensitive and must be between eight and thirty-two characters and <br> \
contain at least one number, one lowercase letter, one uppercase letter, and one non- <br> \
alphanumeric character (e.g. >@+). </html>
CHANGE_PASSWORD_PAGE_DESC1 = <html>Your controller currently has an optional password for additional security. You may change the <br> \
password if desired. If you wish to keep the existing password, you must enter it again here.<br><br> \
Note:<br> \
The password is case-sensitive and must be between eight and thirty-two characters.<br><br> \
If enforce strong password security is selected, then password field should contain at least one <br> \
number, one lower case letter, one uppercase letter, and one non-alphanumeric character <br> \
(e.g. >@+).</html>
CHANGE_PASSWORD_PAGE_DESC2 = <html>Your controller does not currently have an optional password for additional security. You may add <br> \
one if desired. You will be required to enter it every time the server boots.<br><br> \
Note:<br> \
The password is case-sensitive and must be between eight and thirty-two characters.<br><br> \
If enforce strong password security is selected, then password field should contain at least one <br> \
number, one lower case letter, one uppercase letter, and one non-alphanumeric character <br> \
(e.g. >@+).</html>
AUTHENTICATE_DRIVE_SECURITY_SETTINGS_DESC = <html>Authentication is required for the changes that you requested to the drive<br>security \
settings. Please enter the current security key to authenticate these<br>changes.<br><br></html>
CONFIRM_DELETE_VIRTUAL_DRIVE_WARN1 = You have chosen to delete Virtual Drive
CONFIRM_DELETE_VIRTUAL_DRIVE_WARN_FDE=All data on the virtual drive will be lost.\n\n
CONFIRM_DELETE_VIRTUAL_DRIVE_WARN_CONTROLLER=All data on the virtual drive will be permanently erased.\n\n
CONFIRM_DELETE_VIRTUAL_DRIVE_WARN2=Are you sure you want to delete Virtual Drive
CONFIRM_CLEAR_CONFIG_WARN_FDE = You have chosen to clear the configuration. This will \
destroy \nall virtual drives. All data on all virtual drives will be \
lost.\n\nAre you sure you want to clear the configuration?
CONFIRM_CLEAR_CONFIG_WARN_CONTROLLER = You have chosen to clear the configuration. This will \
destroy \nall virtual drives. All data on all virtual drives \
will be securely \nerased. \n\nAre you sure you want to clear the configuration?
CONFIRM_SECURE_ERASE_TITLE = Confirm Secure Erase
DRIVE_GROUP_ENCRYPTION_DESC1 = All of the drives in Drive Group
DRIVE_GROUP_ENCRYPTION_DESC2 = will be secured using \nFull Disk Encryption. \n\nOnce drive group
DRIVE_GROUP_ENCRYPTION_DESC3 = is secured, you will not be able to \nremove the security without \
deleting the virtual \ndrives.\n\nAre you sure you want to secure Drive Group
CONFIRM_SECURE_ERASE_WARN = <html>When you securely erase a drive, any data on the drive will<br>be \
permanently lost.<br><br>Are you sure you want to securely erase the drive in
ENCLOSURE_TEXT = Enclosure
SLOT_TEXT = Slot
CONTROLLER_TEXT = Controller:
DRIVE_SECURITY_KEY_ERROR_MSG = There is a problem with the drive security key on your \ncontroller \
that prevents access to your drives.\n\nTo fix the problem, disable \
and then re-enable the drive \nsecurity feature on your controller, \
then scan for a \nforeign configuration. Your data will remain secure.
#### Importing foreign configuration ####
ENCRYPTION_REQUIRED_TO_IMPORT_DIALOG_TITLE=Encryption Required To Import
LABEL_LOCKED_DRIVES=(L)ocked Drives:
ENCRYPTION_REQUIRED_DESC=<html>You cannot import the following locked foreign drives because<br> encryption is disabled on your controller.Only unlocked drives<br> may be imported.</html>
ENCRYPTION_REQUIRED_CONTINUE_LABEL=Do you want to continue?
UNLOCK_FOREIGN_DRIVES_TITLE=Unlock Foreign Drives
UNLOCK_FOREIGN_DRIVES_DESC = <html>One or more foreign drives are locked using LKM mode.<br><br>\
In order to import these drives, you will need to provide the security key used to secure them.
If you<br>want want to import only unlocked drives, \
leave the security key field blank and select Continue.<br><br>If the locked drives use different \
security keys, enter one security key and repeat the import<br>process for the remaining locked \
drives.<br><br></html>
CANNOT_IMPORT_LOCKED_DRIVES_DESC = <html>You cannot import the following foreign locked drives because the controller<br>\
does not support drive security. Only unlocked drives may be imported. <br><br></html>
DRIVE_SECURITY_NEEDED_TO_IMPORT_DESC = <html>You cannot import the following foreign locked drives because<br>\
drive security is disabled on your controller. Only unlocked drives<br>\
may be imported. You must enable drive security in order to<br>\
import locked foreign drives.<br><br></html>
UNLOCK_FOREIGN_DRIVES_SECURITY_KEY_LABEL = (S)ecurity Key
UNLOCK_FOREIGN_DRIVES_DESC4=<html>If you do not know the Password, you can press Continue to import any <br> unlocked foreign drives. If you do not care about the data on these drives,<br> you can clear the drives to remove encryption and delete all existing data.</html>
BUTTON_CONTINUE_TEXT=(C)ontinue
REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_TITLE=Remove FDE from Unconfigured Drives
REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_DESC1=<html>One or more of the drives that you unlocked does not have <br> any detectable configuration to import. In order to use these <br> drives in a new configuration, their existing full disk encryption <br> must be removed.</html>
REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_DESC2=<html>If there is any undetected data on the drives below, removing <br> full disk encryption will permanently delete that data. If you do <br> not want to clear the data on these drives, click No to leave <br> them encrypted and import only drives that have <br> configurations.</html>
DRIVES_TO_CLEAR_LABEL=(D)rives to clear:
REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_DESC3=<html>There is no way to undo this destructive operation. Are you <br> sure you want to clear these drives?</html>
CLEAR_LOCKED_FOREIGN_TITLE=Clear Locked Foreign Configuration
CLEAR_LOCKED_FOREIGN_DRIVES_DESC1=One or more foreign drives are locked and cannot be cleared.
CLEAR_LOCKED_FOREIGN_DRIVES_DESC2=<html>In order to clear these drives, you will need to provide either the pass <br> phrase used to encrypt each drive or the manufacturer ID that is typically <br> stamped on the drive. This operation will remove the foreign configuration.</html>
CLEAR_LOCKED_FOREIGN_DRIVES_LABEL=Select method to clear drive:
CLEAR_LOCKED_FOREIGN_DRIVES_LABEL1=(U)se Password
CLEAR_LOCKED_FOREIGN_DRIVES_LABEL2=U(s)e manufacturer ID
CLEAR_LOCKED_FOREIGN_DRIVES_LABEL3=(M)anufacturer ID:
BUTTON_CLEAR_DRIVE_TEXT=Clear (D)rive
MSG_INCORRECT_PASSPHRASE=Incorrect security key.
MSG_INCORRECT_MANUFACTURE_ID=Incorrect Manufacturer ID.
PHDRIVE_SECURE_ERASE_OP = Instant Secure (E)rase
PHDRIVE_SECURE_ERASE_OP_DESC = Securely erases the drive, removing drive security.
#########################################################
# CR 71555 Estatoah Falls #
#########################################################
ADAPTER_OPERATION_POWER_SETTINGS = Po(w)er Settings
ADAPTER_OPERATION_POWER_SETTINGS_DESC = Modify the power management settings.
PROPERTY_POWER_STATUS = Power Status
PROPERTY_POWERSAVE_ON = On
PROPERTY_POWER_SAVE = Powersave
PROPERTY_READY_TO_REMOVE = Ready To Remove
PHDRIVE_OPERATION_15 = Undo Prepare for Remo(v)al
PHDRIVE_OPERATION_15_DESC = Cancels Prepare For Removal operation on a physical disk
PHDRIVE_OPERATION_14 = Prepare for Remo(v)al
PHDRIVE_OPERATION_14_DESC = Spins down the selected drive to ready it for removal
SPIN_DOWN_DRIVE = Sp(i)n Down Drive
SPIN_DOWN_DRIVE_DESC = Spins down the selected drive into powersave mode to conserve energy or to prepare for removal.
SPIN_UP_DRIVE = Sp(i)n Up Drive
SPIN_UP_DRIVE_DESC = Spins up a drive that is in powersave mode to prepare it for use.
POWER_SAVE_MODE_DESC_LSI = <html>The controller includes Dimmer SwitchTM technology that conserves energy by<br>placing \
certain unused drives into powersave mode. The controller will automatically<br>spin up \
drives from powersave mode whenever necessary.<br><br></html>
POWER_SAVE_MODE_DESC_OTHERS = <html>The controller conserves energy by placing certain unused drives into powersave \
mode.<br>The controller will automatically spin up drives from powersave mode<br>whenever \
necessary.<br><br></html>
ALLOW_POWERSAVE_MODE = Allow (u)nconfigured drives to enter powersave mode.
LABEL_SPINNING_UP_DRIVES = Spinning up selected drives:
LABEL_COMPLETE = complete.
TITLE_DRIVES_SPIN_UP_PROGRESS = Progress
TITLE_FOREIGN_DRIVES_SPUN_DOWN = Foreign Drives Spun Down
FOREIGN_DRIVES_SPUN_DOWN_DESC = <html>The following foreign drives are currently spun down in \
powersave<br>mode. You must spin them up in order to import them. If you do<br>not spin \
them up now, they will be skipped during the import.<br><br></html>
LABEL_SPUN_DOWN_FOREIGN_DRIVES = (S)pun down foreign drives:
#CR 8624 - Dimmer Switch 2
PROPERTY_HOT_SPARE_SPIN_DOWN = Hot Spare Spin Down
PROPERTY_SPIN_DOWN_TIME = Spin Down Time
STRING_MINUTES = Minutes
PROPERTY_HS_SPIN_DOWN_ENABLED = Enabled
PROPERTY_HS_SPIN_DOWN_DISABLED = Disabled
SPECIFY_SPIN_DOWN_TEXT = <html>Specify the spin down time delay below for the drives to spin down automatically \
after the<br>specified time.<br><br></html>
SPIN_DOWN_TIME_DELAY_LABEL = (S)pin down time delay:
POWER_STATE_TRANSITIONING_IMAGE = transitioning_icon.gif
POWER_SAVE_IMAGE = psave.png
PROPERTY_TRANSITIONING = Transitioning
PROPERTY_UNCONFIGURED_GOOD_SPIN_DOWN = Unconfigured Good Spin Down
PROPERTY_UNCONFIGURED_GOOD_SPIN_DOWN_ENABLED = Enabled
PROPERTY_UNCONFIGURED_GOOD_SPIN_DOWN_DISABLED = Disabled
#CR 80834
PROPERTY_VOLTAGE_SENSOR_COUNT = Number of Voltage Sensors
LABEL_TEMPERATURE_SENSORS = (T)emperature Sensors
LABEL_VOLTAGE_SENSORS_TEXT = (V)oltage Sensors
LABEL_VOLTAGE_SENSOR = Voltage Sensor
LABEL_STATUS_TEXT = Status
LABEL_VOLTAGE_TEXT = Voltage
#CR71008
STRING_KILO_BYTE=KB
STRING_MEGA_BYTE=MB
STRING_GIGA_BYTE=GB
STRING_TERA_BYTE=TB
STRING_PETA_BYTE=PB
#CR99284
MSG_NO_PD_FOUND = Patrol Read cannot be started because there is no configuration available.
MSG_BGI_INPROGRESS = Operation cannot be started while initialization is in progress !
LABEL_SELECT_DRIVE_GROUPS = (S)elect drive group(s):
#CR71008
STRING_KILO_BYTE=KB
STRING_MEGA_BYTE=MB
STRING_GIGA_BYTE=GB
STRING_TERA_BYTE=TB
STRING_PETA_BYTE=PB
#CR LSID100098174 - Sandy Springs
PD_MAKE_SYSTEM_DRIVE = Make (J)BOD
PD_MAKE_SYSTEM_DRIVE_DESC = Assign Unconfigured Good Drive as JBOD.
PD_REMOVE_SYSTEM_DRIVE = Remove (J)BOD
PD_REMOVE_SYSTEM_DRIVE_DESC = Removes the JBOD assignment and changes the drive state to Unconfigured Good.
#CR 100165 - Block uncertified HDDs
PD_STATE_UNCONF_BAD_UNSUPPORTED = Unconfigured Bad (Unsupported)
PD_STATE_UNCONF_GOOD_UNSUPPORTED = Unconfigured Good (Unsupported)
PROPERTY_CERTIFIED_TEXT = Certified
## Pinned cache
MENU_MANAGE_PRESERVED_CACHE=Preserved Cac(h)e
ADAPTER_OPERATION_14=Preserved Cac(h)e
ADAPTER_OPERATION_14_DESC=Manage the preserved cache of missing and offline virtual drives
TITLE_MANAGE_PRESERVED_CACHE=Manage Preserved Cache
DISCARD_PRESERVED_CACHE_BUTTON_TEXT=(D)iscard Cache
VIRTUAL_DRIVES_LABEL=(V)irtual drives with preserved cache:
MANAGE_PRESERVED_CACHE_TEXT=<html>The controller lost access to one or more drives. When access to<br>the drives was lost, the controller preserved the data in the<br>cache.<br><br>The preserved cache will persist until you import the relevant<br>virtual drives or discard the cache. As long as there is preserved<br>cache, you will not be able to perform certain operations.</html>
RETAIN_PRESERVED_CACHE=<html>The controller will retain the remaining preserved cache until you<br>import the virtual drives or choose to discard the cache. As long as<br>you retain the preserved cache, you will not be able to perform<br>certain operations. You can discard the cache at any time by going<br>to the Manage Preserved Cache operation.<br><br>Note: If you reboot your server, you will not be able to start your<br>operating system as long as the preserved cache persists.</html>
CONFIRM_TEXT_WITH_MNEMONIC=(C)onfirm
LDRIVE_MISSING=Missing
BUTTON_CLOSE_TEXT_WITH_MNEMONIC=(C)lose
NO_PRESERVED_CACHE=No preserved cache detected
MSG_GHS_DHS_CREATION_WARNING=<html>The selected drive contains operating system data. If you use this drive<br>in a configuration or as a hot spare, you will permanently lose any<br>data currently stored on the drive.<br><br>Are you sure you want to continue?</html>
MSG_DELETE_CONFIG=<html>You have chosen to clear the configuration. This will<br>destroy all virtual disks. All data on all virtual disks<br>will be lost
MSG_DELETE_CONFIG_CONFIRM_TITLE=Confirm Clear Configuration
MSG_DELETE_CONFIG2=and the preserved cache will be<br>discarded
MSG_DELETE_CONFIG3=Are you sure you want to clear the configuration?</html>
MSG_DELETELD_TEXT1=<html>You have chosen to delete Virtual Disk
MSG_DELETELD_TEXT2=All data<br>on the virtual disk will be lost
MSG_DELETELD_TEXT3=and the preserved<br>cache for this virtual disk will be discarded
MSG_DELETELD_TEXT4=Are you sure you want to delete Virtual Disk
MSG_DELETELD_CONFIRM_TITLE=Confirm Delete Virtual Disk
#### end pinned cache
#########################################################
# Venus Configuration Wizard #
#########################################################
OPERATION_CREATE_VD = Create (V)irtual Drive
#Start - Mode Selection page.
CREATE_VD_CHOOSE_MODE_PAGE_TITLE = Create Virtual Drive - Choose mode
DESCRIPTION_CHOOSE_MODE_1 = <html>This wizard will help you quickly create virtual drives.<br><br></html>
DESCRIPTION_CHOOSE_MODE_2 = <html>Choose how to create the virtual drive:<br><br></html>
BUTTON_SIMPLE = (S)imple
TOOLTIP_SIMPLE_BUTTON = Simple
DESCRIPTION_SIMPLE_MODE = <html>Specify a limited number of settings and have the system pick drives for \
you. This is the easiest way to create a<br>virtual drive.<br><br></html>
BUTTON_ADVANCED = (A)dvanced
TOOLTIP_ADVANCED_BUTTON = Advanced
DESCRIPTION_ADVANCED_MODE = <html>Choose additional settings and customize virtual drive creation. This \
option provides greater flexibility when creating<br>virtual drives for \
your specific requirements.<br><br></html>
#End - Mode Selection Page
#Start - Drive Group hole selection page
DRIVE_GROUP_SELECTION_PAGE_TITLE = Create Virtual Drive - Allocate capacity
DESC_WHERE_T0_CREATE = Where do you want to create the new virtual drive?
LABEL_AVAILABLE_CAPACITY_ON_DG = Use free capacity on an (e)xisting drive group
LABEL_SELECT_A_DG = (S)elect a drive group:
LABEL_USE_FREE_DRIVES = Use (u)nconfigured drives(create new drive group)
#End - Drive Group hole Selection page
#Start - Drive Group and VD settings page
CREATE_VD_SETTINGS_PAGE_TITLE = Create Virtual Drive - Drive group and Virtual drive settings
VD_SETTINGS_LABEL = <html>Use the suggested virtual drive settings or change them if needed.</html>
MIXING_CHECKBOX = (U)se the drive type mixing.
MIXING_DESC = <html>The application has detected SAS,SATA mixed drives in the controller.Use the check box for \
<br> drive type mixing if you need.For best result drive type mixing are not recommended.</html>
RAID_HEADING = <html>Pick a RAID level to specify the amount of fault tolerance and performance for the virtual drive \ (s).</html>
RAID_LABEL = (R)AID level:
RAID_DESC = <html>Pick a RAID level to specify the amount of fault tolerance and performance for<br>the virtual drives.</html>
RAID0_DESC = <html>Suitable for high performance with zero data redundancy.Choose this option<br>only for non-critical data.</html>
RAID1_DESC = <html>\"Disk mirroring\" suitable for high performance with the best<br>data availability.</html>
RAID1E_DESC = <html>RAID level that combines RAID 0's striping capabilities with<br>RAID 1's mirroring protection.</html>
RAID5_DESC = <html>Suitable for multi-user environments(database or file system) with small<br>I/O size and high proportion of read activity.</html>
RAID6_DESC = <html>Suitable for environments requiring redundancy protection beyond RAID 5,<br>but not requiring high write performance.</html>
RAID00_DESC = <html>RAID level 00 is a stripe of stripes.</html>
RAID10_DESC = <html>RAID level 10 is a stripe of mirrors.</html>
RAID50_DESC = <html>Combines the straight block-level striping of RAID 0 with<br>distributed parity of RAID 5.</html>
RAID60_DESC = <html>Combines the straight block-level striping of RAID 0 with<br>distributed double parity of RAID 6.</html>
RAID0_ICON = R0.png
RAID1_ICON = R1.png
RAID1E_ICON = R1E.png
RAID5_ICON = R5.png
RAID6_ICON = R6.png
RAID00_ICON = R00.png
RAID10_ICON = R10.png
RAID50_ICON = R50.png
RAID60_ICON = R60.png
DRIVE_TYPE_DISABLE_ICON = Drive_Type_Dis.png
DRIVE_TYPE_ENABLE_ICON = Drive_Type.png
HOTSPARE_DISABLE_ICON = HotSpare_New_Dis.png
HOTSPARE_ENABLE_ICON = HotSpare_New.png
VIRTUAL_DRIVE_ICON = virtualdrive.png
CAPACITY_ICON = capacity.png
HOTSPARE_CHECBOX = Assign a h(o)t spare
HOTSPARE_DESC = <html>Hot spare will be assigned depending upon the availability of eligible hot spare candidate drives.\
A hot<br> spare drive will takeover for a drive if a failure happens,ensuring your data will remain \ intact.</html>
SECURITY_CHECKBOX = Use drive (s)ecurity
SECURTIY_DESC = <html>Drive security method will be assigned depending upon the controller settings.The drive security will\
<br> make the virtual drive secure by applying encryption logic to the data in the drive</html>
VIRTUAL_DRIVE_LABEL = (V)irtual drives:
VIRTUAL_DESC = <html>Choose how many virtual drives you want to create.</html>
CAPACITY_LABEL = (C)apacity:
CAPACTIY_DESC = <html>Select the capacity for the virtual drive(s).Each virtual drive have the same capacity.</html>
#End - Drive Group and VD settings page
#Start - Advance Drive Group creation page.
ADVANCED_DG_CREATION_PAGE_TITLE = Create Drive Group - Drive Group Settings
PICK_RAID_DESC = <html>Create the drive group by specifying the RAID level and Drive security method.</html>
LABEL_RAID_LEVEL_ADG = (R)AID level:
LABEL_DRIVE_SECURITY = (D)rive security method:
DRIVE_SECURITY_DESC = <html>Drive security will make the virtual drive secure by applying encryption logic to<br>underlying data in the drive.</html>
NO_ENCRYPTION_DESC = <html>Data in the virtual drives will not have encryption.</html>
CTRL_ENCRYPTION_DESC = <html>Data in the virtual drives will be encrypted using controller generated<br>encryption keys.</html>
FDE_ENCRYPTION_DESC = <html>Data in the virtual dirves will be encrypted by the drive itself.</html>
NO_ENCRYPTION_ICON = noEncryption.png
FDE_ENCRYPTION_ICON = controllerEncryption.png
CTRL_ENCRYPTION_ICON = controllerEncryption.png
BUTTON_CREATE_DG = (C)reate Drive Group
BUTTON_CREATE_SPAN = Create (S)pan
LABEL_SELECT_UG_DRIVES = Select (u)nconfigured drives:
BUTTON_ADD_DRIVE = (A)dd >
BUTTON_ADD_HSP = Add H(o)t Spare >
BUTTON_REMOVE_DRIVE = < Remo(v)e
#End - Advance Drive Group creation page.
#Start - Advance Virtual Drive Creation Page.
ADVANCED_VD_CREATION_TITLE = Create Virtual Drive - Virtual drive settings
LABEL_SPECIFY_PARAMS = Specify parameters for the new virtual drive.
LABEL_DRIVE_GROUPS = Drive (g)roups:
BUTTON_CREATE_VD = (C)reate Virtual Drive
BUTTON_UPDATE_VD = (U)pdate Virtual Drive
BUTTON_REMOVE_VD = (R)emove Virtual Drive
LABEL_VD_NAME = (V)irtual drive name:
LABEL_CAPACITY = Capacit(y):
LABEL_UNITS = Uni(t)s:
LABEL_INIT_STATE = (I)nitialization state:
LABEL_STRIPE_SIZE = Stripe si(z)e:
LABEL_READ_POLICY = R(e)ad policy:
LABEL_WRITE_POLICY = (W)rite policy:
LABEL_IO_POLICY = I/O (p)olicy:
LABEL_ACCESS_POLICY = (A)ccess policy:
LABEL_DISK_CACHE_POLICY = (D)isk cache policy:
#End - Advance Virtual Drive Creation Page.
#Start - Configuration Summary page
CREATE_VD_CONFIG_SUMMARY_TITLE = Create Virtual Drive - Summary
CONFIG_SUCCESS_TITLE = Create Virtual Drive - complete
CONFIG_SUCCESS_MSG = The virtual drive(s) successfully created.
CONFIG_SUCCESS_CREATE_MORE = The virtual drives were created successfully.\nDo you want to create more virtual drives?
CONFIG_FAILED_TITLE = Create Configuration Failed.
CONFIG_CONFIRMATION_TITLE = Create virtual Drive - Confirmation
CONFIG_CANCEL_MSG = Do you want to close this wizard?
CONFIG_SUMMARY_DESC = Review the summary and go back if you need to make corrections. The virtual drive(s) \
will be created when you click finish.
CONFIG_SUMMARY_LABEL = (S)ummary:
#Start - Advance config summary generation.
SUMMARY_TEXT_DG_NAME = Drive group name:
SUMMARY_TEXT_RAID_LEVEL = RAID level:
SUMMARY_NO_OF_DRIVES_USED = Number of drives used:
SUMMARY_NO_OF_DRIVES_PER_SPAN = Number of drives per span:
SUMMARY_NO_OF_SPANS = Number of spans:
SUMMARY_TEXT_DRIVE_SECURITY_METHOD = Drive security method:
SUMMARY_TEXT_HOT_SPARE = Hot spare
SUMMARY_TEXT_HSP_YES = Yes
SUMMARY_TEXT_HSP_NO = No
SUMMARY_TEXT_TOTAL_CAPACITY = Total capacity:
SUMMARY_TEXT_FREE_CAPACITY = Free capacity:
SUMMARY_TEXT_VD_NAME = Virtual drive {0} name:
SUMMARY_TEXT_CAPACITY = Capacity:
#End - Advance config summary generation.
#End - Configuration Summary page
COL_NAME_DG = Drive group name
COL_NAME_RL = RAID level
COL_NAME_FC = Free capacity
LABEL_DG = DG-{0}
LABEL_SPANNED_DG = Spanned DG-{0}
LABEL_FREE_CAPACITY = Free capacity node {0}
#######################################################################
# CRs 94092 and 97537 Estatoah Falls Maintenance
#######################################################################
ALWAYS_WRITE_BACK_SELECTED_DESC = <html>Always Write Back mode provides optimal performance, but data loss will <br>\
occur if there is a power failure and no cache battery installed or the battery <br>\
is failed or discharged.<br><br>\Are you sure you want to select Always Write Back mode? <br><br></html>
WRITE_THROUGH_SELECTED_DESC = <html>Write Through mode eliminates risk of losing cached data in case of power<br>\
failure. But it may result in slower performance.<br><br>\
Are you sure you want to select Write Through mode? <br><br></html>
WRITE_BACK_WITH_BBU_SELECTED_DESC = <html>Write Back with BBU policy enables Write Back caching when BBU is <br>\
installed and charged. It provides optimal balance between data safety and <br>\
performance. <br><br>\
However, slower performance should be expected when BBU is not <br>\
installed,not fully charged, or running through re-learn cycle.<br><br>\
Are you sure you want to select Write Back with BBU mode?<br><br></html>
WRITE_BACK_WITH_BBU_SELECTED_NO_OR_BAD_BATTERY_DESC =<html>You have selected Write Back with BBU.<br><br>\There is no cache battery installed or the battery charge is low or the battery<br>\
is failed or the battery is running through re-learn cycle.In this case the <br> write policy will switch to Write Through.<br><br>\
Write Through eliminates risk of losing cached data in case of power<br>failure. But it may result in slower performance.<br><br>\
Write Back with BBU policy enables Write Back caching when BBU is <br>installed and charged. It provides optimal balance between data safety and <br>\
performance.<br><br>\Are you sure you want to select Write Back with BBU mode?<br><br></html>
TITLE_ALWAYS_WRITE_BACK_SELECTED =Always Write Back Selected
TITLE_WRITE_THROUGH_SELECTED =Write Through Selected
TITLE_WRITE_BACK_WITH_BBU_SELECTED =Write Back with BBU Selected
RECONSTRUCTION_IN_PROGRESS = <html>You cannot change the properties of a virtual drive. Reconstruction is<br>\
in progress<br><br></html>
REASON_FOR_DIFFERENCE_IN_WRITE_POLICY = Reason for difference in Write Policy
BBU_NOT_INSTALLED = BBU is not installed
BBU_IS_FAILED = BBU is failed
BBU_IS_DISCHARGED = BBU is discharged
BBU_IN_RE-LEARN_CYCLE = BBU in re-learn cycle
RECONSTRUCTION_IS_IN_PROGRESS = Reconstruction is in progress
#########################################################################
# Venus - Drive Group Reconfiguration Wizard Changes #
#########################################################################
RECONFIG_RAID_SELECTION_PAGE_TITLE = Modify Drive Group - Select the possible RAID level
RECONFIG_RAID_SELECTION_INSTRUCTION = <html>This wizard allows you to modify the drive group configuration by adding drives to the virtual drive or removing drives from it, or changing its<br>RAID level.</html>
LABEL_DG_NAME = Drive group name: {0}
LABEL_RAID_LEVEL = RAID level: RAID {0}
LABEL_VD_STATE = Virtual drive state: {0}
LABEL_CURRENT_DG_CONFIG = Current drive group configuration
LABEL_SELECT_RL = Select the (R)AID level you want to migrate:
LABEL_RAID_LEVEL_SELECT = Select
LABEL_SELECT_RL_DES = Pick a RAID level to specify the amount of fault tolerance and performance for the virtual drives.
RECONFIG_MENU = (M)odify Drive Group
RECONFIG_MODE_SELECTION_PAGE_TITLE = Modify Drive Group - Choose the operations
LABEL_MODE_SELECTION_HEADING = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2} you can either Add the drives or \
Remove the drives or Migrate the<br>RAID level.<br><br></html>
LABEL_MODE_SELECTION_HEADING_WITHOUT_MIGRATE = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2} you can either Add the drives or \ Remove the drives.<br><br></html>
LABEL_CHOOSE_OPERATIONS = <html>Choose the operations you want to perform:<br><br></html>
LABEL_ADD_DRIVES = (A)dd drives
DESC_ADD_DRIVES = <html>Add drive provides a way to reconstruct the existing storage configuration by adding new physical drives.<br><br></html>
LABEL_REMOVE_DRIVES = (R)emove drives
DESC_REMOVE_DRIVES = <html>Remove drive provides a way to reconstruct the existing storage configuration by removing physical drives.<br><br></html>
LABEL_MIGRATE_RL = (M)igrate RAID level
DESC_MIGRATE_RL = <html>Migrate RAID Level provides a way to reconstruct the existing storage configuration without adding or removing the \
drives.<br>This has been done by changing the RAID Level only.<br><br></html>
RECONFIG_SUMMARY_PAGE_TITLE = Modify Drive Group - Summary
LABEL_RECONFIG_PAGE_HEADING = Review the summary and go back if you need to make corrections. The Changes will be made when you click Finish.
LABEL_RECONFIG_SUMMARY = Summary:
LABEL_RECONFIG_SUMMARY_VD_NAME = Virtual drive name:
LABEL_RECONFIG_SUMMARY_NO_DRIVES = Number of drives:
LABEL_CURRENT_SETTINGS = Current settings:
LABEL_POST_MODI_SETTINGS = Post modification settings:
RECONFIG_DG_MODIFICATION_PAGE_TITLE_ADD = Modify Drive Group - Add drive to the current configuration
RECONFIG_DG_MODIFICATION_PAGE_TITLE_REMOVE = Modify Drive Group - Remove drive from the current configuration
LABEL_DG_MODIFY_REMOVE = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2}, you can remove at most {3} drive(s) from \
the configuration.<br>Use the below table to remove the drive(s) and click next to proceed. You cannot remove a drive \
which is a part of required drive set for the selected<br>RAID level.<br><br></html>
LABEL_DG_MODIFY_REMOVE_WO_DRIVES = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2}, you can either remove the \
drives from the table below or proceed<br>without removing any drives.<br><br></html>
LABEL_DG_MODIFY_ADD = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2}, you need to add at least {3} drive(s) to the \
configuration.<br>Use the below table to add the drive(s) and click next to proceed.<br><br></html>
LABEL_DG_MODIFY_ADD_WO_DRIVES = <html>You have selected RAID {0}. To migrate from RAID {1} to RAID {2}, you can either add the drives from \
the table below or proceed<br>without adding any drives.<br><br></html>
LABEL_SELECT_UG_DRIVES_ADD = Select the unconfigured drive to (a)dd:
LABEL_SELECT_DRIVES_REMOVE = Select the drive to remo(v)e:
COL_NAME_AVAILABLE_DRIVES = Available Drives
COL_NAME_TYPE = Type
COL_NAME_CAPACITY = Capacity
COL_NAME_STATUS = Status
MODIFY_DG_CONFIRM_TITLE = Modify Drive Group - Confirmation
MODIFY_DG_CONFIRM_MSG = This operation cannot be stopped. Do you want to continue?
#########################################################################
# END - Venus - Drive Group Reconfiguration Wizard Changes #
#########################################################################
#################################################################
# START - TG - Drive Group and Virtual Drive Expansion #
#################################################################
MENU_VD_EXPAND = (E)xpand
TITLE_EXPAND_VD = Expand virtual drive
EXPAND_VD_DESC = <html>Use the default percentage value to occupy the remaining capacity in the \
drive group or<br>change the percentage if needed. The virtual drive expansion \
may also expand the<br>drive group if necessary.<br><br>The expansion will occur \
when you click OK. On click of cancel will terminate this<br>operation.<br><br></html>
LABEL_CURRENT_VD_CAPACITY = <html><b>Current Capacity: {0}</b></html>
AVAILABLE_CAPACITY_TO_GROW = <html><b>Available capacity: {0}</b></html>
LABEL_NEW_VD_SIZE = <html><b>Capacity of the virtual drive after expansion: {0}</b></html>
BUTTON_EXPAND_TO_MAX = E(x)pand the virtual drive to occupy remaining space in disk group
BUTTON_EXPAND_TO_PERCENT = Expand the virtual drive to (p)ercentage of available capacity
LABEL_ENTER_PERCENT = (E)nter a percentage of available capacity:
#################################################################
# END - TG - Drive Group and Virtual Drive Expansion #
#################################################################
####################################################################
# IMAGE FILE NAMES #
####################################################################
LABEL_TEMPERATURE_ICON=temperature.jpg
LABEL_FAN_ICON=fan.jpg
LABEL_POWER_ICON=powersupply.jpg
ENCLOSURE_BOX_IMAGE=enclosurebox.jpg
UNCONF_ENCLPD_IMAGE=enclosurepd.jpg
ONLINE_ENCLPD_IMAGE=onlinepd_in_enclosure.jpg
OFFLINE_ENCLPD_IMAGE=offlinepd_in_enclosure.jpg
EMPTYSLOT_ENCL_IMAGE=emptyslot_in_enclosure.jpg
HOTSPARE_ENCLPD_IMAGE=hotsparepd_in_enclosure.jpg
REBUILD_ENCLPD_IMAGE=rebuildpd_in_enclosure.gif
DEFAULT_HOST_IMAGE=host.jpg
DEGRADED_HOST_IMAGE=degraded.jpg
FAILED_HOST_IMAGE=failed.jpg
LSI_LOGO_IMAGE=lsi_logo.jpg
SELECTED_HOST_IMAGE=selected_host.jpg
RIGHT_ARROW=rightarrow.jpg
LEFT_ARROW=leftarrow.jpg
PHDRIVE_IMAGE=phdrive.png
ADAPTER_IMAGE=controller_standard.jpg
PORT_IMAGE=port.jpg
UNCONFIG_IMAGE=unconfig.png
AUTO_CONF=wrench.jpg
MANUAL_CONF=hammer.jpg
GUIDED_CONF=guided.jpg
RECON_INSERT_IMG=plus.jpg
RECON_DELETE_IMG=Scissor.jpg
RECON_CHANGE_IMG=thread_chaser.jpg
RECON_DOWN_IMG=arrowdown.jpg
RECON_UP_IMG=arrowup.jpg
PHDRIVE_SCSI_IMAGE=scsidrive.jpg
NEEDS_ATTENTION_IMAGE=needatn.jpg
PHDRIVE_FC_IMAGE=phdrive.png
PHDRIVE_SAS_IMAGE=sasdrive.jpg
BANNER_SMALL_IMAGE=small_banner.jpg
PHDRIVE_SATA_IMAGE=satadrive.jpg
LDRIVE_IMAGE=volume.jpg
BBU_IMAGE=battery.png
BANNER_IMAGE=banner.jpg
SPLASH_ICON=msm_splash_screen.jpg
SPLASH_ICON_INTEL=rwc_splash_screen.jpg
FOREIGN_DRV_SAS=Foreign_Drv_sas.png
FOREIGN_DRV_SATA=Foreign_Drv_sata.png
DIALOG_BANNER_IMAGE=dialog_banner.jpg
LSI_DIALOG_LOGO_IMAGE=dialog_logo.jpg
REBUILDDRV_SAS=RebuildDrv_sas.png
REBUILDDRV_SATA=RebuildDrv_sata.png
VIRTUAL_DISK_NOIMP=VirtualDisk_noimp.png
PHYSICAL_DISK_NOIMP_SAS=NoImpDrive_sas.png
PHYSICAL_DISK_NOIMP_SATA=NoImpDrive_sata.png
LSI_PROGRAM_ICON_16=16_prg_icon.png
LSI_LOGIC_BANNER_IMAGE=lsi_logic_banner.jpg
LSI_LOGIC_LOGO_IMAGE=lsi_logic_logo.jpg
GLOBAL_HOTSPARE_IMAGE=Global_Drv_hotspr.jpg
CONTROLLER_NOENCRYPTION=controller_encryp.gif
CONTROLLER_ENCRYPTED=controller_noencryp.gif
DG_ENCRYPTION=dg_encryp.gif
DG_NOENCRYPTION=dg_noencryp.gif
DRIVE_FDE_IMAGE = drive_fde.png
DRIVE_FDE_LOCK_IMAGE = fde_locked.png
DRIVE_FDE_UNLOCK_IMAGE = fde_unlock.png
HOTSPARE_FDE_IMAGE = hotspare_fde.png
HOTSPARE_GLOBAL_FDE_IMAGE = hotspare_global_fde.png
#ESTATOAH FALLS ICONS
ARRAY_IMAGE=array.png
BACKPLANE_IMAGE=backplane.png
CONFIGURED_IMAGE=configured.png
CONFIGURED_DRIVES_IMAGE=configured_drives.png
FOREIGN_DRIVE_IMAGE=foreign_drive.png
FREE_CAPACITY_IMAGE=free_capacity.png
FREE_CAPACITY_TOTAL_IMAGE=free_capacity_total.png
HOTSPARE_IMAGE=hotspare.png
HOTSPARE_GLOBAL_IMAGE=hotspare_global.png
HOTSPARES_IMAGE=hotspares.png
HOTSPARES_GLOBAL_IMAGE=hotspares_global.png
NO_IMPORT_IMAGE=no_import.png
REBUILD_IMAGE=rebuild.png
SERVER_IMAGE=server.png
UNCONFIGURED_IMAGE=unconfigured.png
UNCONFIGURED_DRIVES_IMAGE=unconfigured_drives.png
VOLUME_IMAGE=volume.png
VOLUMES_IMAGE=volumes.png
BATTERY_IMAGE=battery.png
CDROM_IMAGE=cdrom.png
CONTROLLER_LOCK_IMAGE=controller_lock.png
CONTROLLER_STANDARD_IMAGE=controller_standard.png
CONTROLLER_UNLOCK_IMAGE=controller_unlock.png
DEGRADED_IMAGE=degraded.png
LABEL_VOLTAGE_ICON= voltage_sensor.png
ENCLOSURE_IMAGE=enclosure.png
FAILED_IMAGE=failed.png
FOREIGN_DRIVE_UNCONFIGURED_IMAGE=foreign_drive_unconfigured.png
HOTSPARE_FDE_IMAGE=hotspare_fde.png
PARTIAL_DEGRADED_IMAGE=partialdegraded.png
TAPE_IMAGE=tape.png
VIRTUAL_DISK_NOIMP_IMAGE=virtual_disk_noimp.png
SPAN_IMAGE=span.png
#CR 100165 - Block uncertified HDDs
NON_CERTIFIED_DRIVE_IMAGE = non_supported_pd.png
PD_STATE_DIRECT=JBOD
#jskarai VENUS-II START
MENU_LOGVIEW_TEXT=(L)oad
#MENU_LOGSAVE_TEXT=Save as (T)ext
#MENU_LOGCLEAR_TEXT=(C)lear
MENU_HELPME_TEXT=(C)ontents
MENU_ABOUT_TEXT=(A)bout MegaRAID Storage Manager
#MENU_LOGSAVE_TEXT_FORMAT=Save as (X)ML
BIOS_TEXT=Load BIO(S)
SAVEAS=(S)ave as
#jskarai VENUS-II END
#CR 13015
WARN_REPROVISIONING_ON_SECURED_FDE_DISK = <html>One or more secured FDE drives are chosen for this operation.<br>\
Any data on the drives will be permanently lost.<br><br>Are your sure you want to proceed?<br><br></html>
TITLE_WARN_REPROVISIONING_ON_SECURED_FDE_DISK = Confirm instant secure erase
#LSID100131239
BBU_CHARGED=Battery is not being charged
BBU_DISCHARGED=Battery is not being discharged
#LSID100131728
PR_START_TITLE = Patrol Read Start
SET_CTRL_TITLE = Set Controller Property
PR_DIS_TITLE = Patrol Read Disabled
PR_NO_PD_TITLE = Patrol Read - No PD
PR_NO_CONFIG_TITLE = Patrol Read - No Configuration
PR_ERROR_TITLE = Patrol Read - Error
CC_SCH_TITLE = Consistency Check
FOREIGN_CONFIG_IMPORT_TITLE = Foreign Config - Import
#TG start
CONFIRM_DISABLE_SNAPSHOT_TITLE=Confirm Disable Snapshots
CONFIRM_DRIVECLEAN=Confirm Drive Clean Up
CONFIRM_CLEAR_SNAPSHOT_STRING=Confirm Clear Snapshots
VOLUME_REPOSITORY_IMAGE=volume_snapshot.png
REPOSITORY_VIRTUAL_DRIVE_TEXT=Snapshot Repository
SNAPSHOTS_TAB_TEXT=Snapshots
LDRIVE_OPERATION_ENABLE_SNAPSHOT=E(n)able MegaRAID Recovery
LDRIVE_OPERATION_ENABLE_SNAPSHOT_DESC=Enables Snapshot on a VD
LDRIVE_OPERATION_DISABLE_SNAPSHOT=Di(s)able MegaRAID Recovery
LDRIVE_OPERATION_DISABLE_SNAPSHOT_DESC=Disables Snapshot on a VD
LDRIVE_OPERATION_SNAPSHOT_GARBAGE_COLLECTION=Drive Clean Up (Garbage Collection)
LDRIVE_OPERATION_SNAPSHOT_GARBAGE_COLLECTION_DESC=Cleans up all the orphaned PITs
LDRIVE_OPERATION_SNAPSHOT_PIT_ROLLBACK=Roll Back Snapshot
LDRIVE_OPERATION_SNAPSHOT_PIT_ROLLBACK_DESC=Rolls back to some PIT
LDRIVE_OPERATION_SET_SNAPSHOT_PROPERTIES=Set MegaRAID Recovery Proper(t)ies
SET_SNAPSHOT_PROPERTIES_TITLE=Set MegaRAID Recovery Properties
LDRIVE_OPERATION_SET_SNAPSHOT_PROPERTIES_DESC=Sets the Snapshot Properties
PROP_SNAPSHOT_PROP=<html><b>MegaRAID Recovery Properties:</b></html>
PROPERTY_SNAPSHOTS_TEXT=MegaRAID Recovery
PROPERTY_DRIVE_CLEAN_UP_TEXT=Drive clean up (Garbage collection)
ENABLE_SNAPSHOT_TITLE=Enable MegaRAID Recovery
DISABLE_SNAPSHOT_TITLE=Disable MegaRAID Recovery
ENABLE_SNAPSHOT_CONFIRMATION_TITLE=Enable Snapshot - Confirmation
ENABLE_SNAPSHOT_DESC=<html>This base virtual drive will have an associated snapshot repository virtual drive where the snapshot-related data will be<br>\
stored. Use the suggested snapshot repository or change it if needed. Then determine the capacity to set aside in the<br>\
snapshot repository for changes to the base virtual drive. The available capacity is the largest free block of capacity on the<br>\
snapshot repository virtual drive.</html>
PERCENT_LABEL=(P)ercentage of Base:
SNAPSHOT_REPOSITORY_LABEL=(S)napshot Repository:
PERCENT_LABEL1=%
AUTO_SNAPSHOT=(T)ake snapshot on reboot
AUTO_SNAPSHOT_DESC=<html>Selecting this option will take a snapshot of the VD on boot after every successful shutdown. This feature is mainly intended to<br>\
take snapshot of boot VDs to allow restoring the OS on the VD in case of corruption. Before selecting take snapshot on reboot<br>\
on the VD, please ensure that you have copied all data to the VD</html>
AUTO_DELETE_SNAPSHOT=Enable (a)uto deletion of snapshot
AUTO_DELETE_SNAPSHOT_DESC=Selecting this option would enable auto deletion of old snapshots and allows to create a new snapshots.
CONFIRM_ENABLE_SNAPSHOT_REP=<html>Once you enable snapshots on this virtual drive, you cannot change<br>\
the allocated capacity percentage or the snapshot repository without<br>\
first disabling snapshots and losing any snapshot data.<br><br>\
Are you sure you want to enable snapshots on Virtual Drive:
CONFIRM_ENABLE_SNAPSHOT_TITLE=Confirm Enable Snapshots
CONFIRM_DISABLE_SNAPSHOT_TITLE=Confirm Disable Snapshots
CONFIRM_ENABLE_SNAPSHOT_NON_REP=<html>Once you enable snapshots on this virtual drive, you cannot change<br>\
the allocated capacity percentage or the snapshot repository without<br>\
first disabling snapshots and losing any snapshot data.<br><br>
CONFIRM_ENABLE_SNAPSHOT_NON_REP_CONT1=will become a snapshot repository.<br>\
It should now only be used for storing snapshot-related data. If there<br>\
is any existing data on
CONFIRM_ENABLE_SNAPSHOT_NON_REP_CONT2=it will be lost.<br><br>\
Are you sure you want to enable snapshots on
BASE_VIRTUAL_DRIVE_TEXT=Snapshot Base
PROPERTY_STATUS_TEXT=Status
PROPERTY_REPOSITORY_TEXT=Repository
GRAPHICAL_REP=Graphical representation of repository
CONFIRM_DISABLE_SNAPSHOT=<html>If you disable snapshots on this virtual drive, you will lose any<br>\
snapshot-related data that is currently stored on its associated<br>\
snapshot repository and you will not be able to create any new<br>\
snapshots.<br><br>\
Are you sure you want to disable snapshots on
DRIVE_CLEAN_UP_TITLE=Drive Clean Up
CONFIRM_DRIVE_CLEAN_UP=<html>You have unused snapshot virtual drives in the system. Please bring<br>\
back the drives to use those snapshot repository space or clean up the<br>\
drives so that you can use it for new snapshot repository,<br><br>\
All the old data will be lost when you clean up the drives.<br><br>\
Are you sure you want to clean up the drives?<br>\</html>
NAME=Name
DOC=Date of creation
STATUS=Status
CAPACITY_USED=Capacity Used
DELETE_SNAPSHOT=(D)elete Snapshot
CREATE_VIEW=Create (V)iew
LABEL_VIEW_DETAILS=View Details
LABEL_VIEW_NAME=View name
TARGET_ID=Target ID
BUTTON_DELETE_VIEW = Dele(t)e View
CREATE_VIEW_TITLE = Create View
CREATE_VIEW_CONFIRMATION_TITLE = Create View- Confirmation
SNAPSHOT_DETAILS=SnapShot Details
ASSOCIATED_REPOSITORY=Associated Repository:
SNAPSHOT_NAME_TEXT=(E)nter snapshot name:
CREATE_SNAPSHOT_BUTTON_TEXT=(C)reate Snapshot
SNAPSHOT_TIME_LINE_TEXT=Snapshots time line
SNAPSHOT_NAME_MANDATORY=Enter Snapshot Name - Mandatory
SNAPSHOT_NAME_MANDATORY_MESSAGE=You cannot leave this field blank. Enter a snapshot name to proceed.
PROPERTY_DRIVE_CLEAN_UP_TEXT=Drive clean up(Garbage collection)
PROPERTY_ASSOCIATED_BASEVD_TEXT=<html><b>Associated base virtual drives:</b></html>
PROPERTY_TOTAL_CAPACITY_TEXT=Total capacity
PROPERTY_NUM_HOLES_TEXT=Number of Holes
PROPERTY_PERCENT_CAPACITY_USED_TEXT=Percentage of Capacity used
PROPERTY_PERCENT_CAPACITY_REMAINING_TEXT=Percentage of Capacity remaining
NO_PITS_TEXT=No PITs found
ENTER_VIEW_NAME_LABEL=(E)nter View name:
CAPACITY_USED=Capacity used
CAPACITY_REMAINING=Capacity remaining
STATE=State
ROLLBACK_PROGRESS=RollBack Progress
INSUFFICIENT_CAPACITY=<html>You do not have any virtual drives available to store the<br>\
snapshot data. You need to create a new virtual drive with<br>\
sufficient capacity to designate as a snapshot repository.<br></html>
INSUFFICIENT_CAPACITY_TITLE=Insufficient Capacity
LDRIVE_OPERATION_CREATE_SNAPSHOT=(C)reate Snapshots
LDRIVE_OPERATION_CREATE_SNAPSHOT_DESC=Creates Snapshots on set of VDs.
LDRIVE_OPERATION_CREATE_SNAPSHOT_TITLE=Create Snapshots
CREATE_CTS_DESC=Select the base virtual drives for which you want to create concurrent snapshots.
SELECT_BASE_VD_TEXT=(S)elect base virtual drives:
LDRIVE_OPERATION_DELETE_SNAPSHOT=Clea(r) Snapshots
LDRIVE_OPERATION_DELETE_SNAPSHOT_DESC=Clears All the Snapshots of the VD.
CLEAR_SNAPSHOTS_TITLE=(C)lear Snapshots
CONFIRM_CLEAR_SNAPSHOT=<html>If you clear snapshots on this virtual drive, you will lose any<br>\
snapshot-related data that is currently stored on its associated<br>\
snapshot repository.<br><br>\
Are you sure you want to clear snapshots on
CREATE_CONSISTENCY_SET_SUCCESSFUL=<html>The snapshots were created successfully. Please select the<br>\
snapshot base to see the corresponding details of the<br>\
snapshots.<br></html>
CONSISTENCY_SET_CREATED_TITLE=Confirmation Snapshot Created
CREATE_VIEW_DESC=<html>Determine the capacity to set aside in the snapshot by specifying a percentage of<br>\
the base virtual drive capacity.<br></html>
SNAPSHOT_STATE=Snapshot State
SNAPSHOT_STATE_OPERATIONAL=Operational
SNAPSHOT_STATE_NONOPERATIONAL=Non Operational
CAPACITY_LEFT=Capacity Left
SNAP_NAME=Snapshot Name
SCD=Snapshot Creation Date
AUTO_SNAP=Snapshot on Reboot
AUTO_DOS=Auto Deletion of oldest Snapshot
PROPERTY_OS_DISK_NAME=OS disk name
PROPERTY_ENABLED = Enabled
PROPERTY_DISABLED = Disabled
DELETE_VIEW_TITLE = Delete View
CONFIRM_DELETE_VIEW = <html>You have chosen to delete the View.All the data <br>\
related to this view will be lost.<br><br>\
Are you sure you want to delete the View?</html>
DELETE_SNAPSHOT_TITLE = Delete Snapshot
CONFIRM_DELETE_SNAPSHOT = <html>You have chosen to delete the Snasphot.All the data <br>\
related to this Snapshot will be lost.<br><br>\
Are you sure you want to delete the Snapshot?</html>
CREATE_SNAPSHOT_TITLE = Create Snapshot
CONFIRM_CREATE_SNAPSHOT = <html>You have chosen to Create a Snapshot. This operation<br>\
will delete the Oldest Snapshot.<br><br>\
Are you sure you want to delete the Snapshot?</html>
NO_REP_SPACE=<html>You have reached
NO_REP_SPACE_1=of snapshot repository. Please take back up<br>\
of your snapshot base data to avoid data loss or delete the oldest<br>\
snapshot to get free capacity.</html>
RUNNING_OUT_OF_SPACE_TITLE=Runing Out Of Space
NO_VIEW_SPACE_1=of View Spcae in snapshot repository. Please take back up<br>\
of your View data to avoid data loss.</html>
SNAPSHOT_DISABLED_TITLE=Snapshots Disabled.
NO_SPACE=<html>Snapshots are Non-operational since there is no space in<br>\
the repository. Please disable the Snapshots on the VD.</html>
LABEL_AVAILABLE_CAPACITY=(A)vailable Capacity
CREATE_SNAPSHOT_NOTE = <html><b>Note: </b>This will create a snapshot in the snapshot <br>\
time line. Once it is reached the maximum supported <br>\
count, Create snapshot button will be disabled.</html>
SNAP_BASE_DETAILS = Snapshot Base Details
DELETE_SNAPSHOT_NOTES = <html><b>Note: </b>Only oldest snapshot <br> information can be deleted</html>
#TG end
#SSD-SSC
SSC_DRIVEGROUP=SSC Drive Group
OPERATION_CREATE_SSCD = Cr(e)ate SSCD
SSC_HOLE_UNCONFIGPD_SELECTION_PAGE_TITLE = Create Super Sized Cached - Allocate capacity
SSC_DESC_WHERE_T0_CREATE = Where do you want to create the new SSCD?
SSC_LABEL_USE_FREE_DRIVES = Use (u)nconfigured SSD drives(create new SSC drive group)
SSC_DRIVE_GROUP_SELECTION_PAGE_TITLE = Create Super Sized Cache Drive group
SSC_LABEL_SELECT_UG_DRIVES = Select (u)nconfigured SSD drives:
SSC_LABEL_DRIVE_GROUPS = SSC Drive (g)roups:
SSC_BUTTON_CREATE_DG = (C)reate SSC Drive Group
SSC_ADVANCED_VD_CREATION_TITLE = Create Super Sized Cache Drive
SSC_LABEL_SPECIFY_PARAMS = Specify parameters for the new SSCD.
LABEL_SSCD_NAME = (S)SCD name:
SSCD_CREATE = (C)reate
SSCD_UPDATE = (U)pdate
SSCD_REMOVE = (R)emove
SSC_CREATE_VD_CONFIG_SUMMARY_TITLE = Create Super Sized Cache - Summary
SSC_CONFIG_SUMMARY_DESC = Review the summary and go back if you need to make corrections. The SSCD(s) \
will be created when you click finish.
SSC_CONFIG_SUCCESS_TITLE = Create Super Sized Cache Disk - Complete
SSC_CONFIG_SUCCESS_MSG = The SSCD(s) were successfully created.
SSC_SUMMARY_TEXT_DG_NAME = SSC Drive group name:
SSC_SUMMARY_TEXT_VD_NAME = SSCD {0} name:
TITLE_SELECT_RAID_LEVEL_AND_ENCRYTION = RAID and Encryption
SSC_GROUP_IMAGE = sscds_group.png
SSCD_VD_IMAGE = sscd_vd.png
SSCD_MAPPED_VD = sscdmapedvd.png
SSCD_TEXT = Super Sized Cache Disks
PROPERTY_SSCDSTATE_TEXT = SSCD State
MSG_DELETESSCD_TEXT1 = <html>You have chosen to delete SSCD
MSG_DELETESSCD_TEXT2 = All data<br> on the SSCD will be lost
MSG_DELETESSCD_TEXT3 = and the preserved<br> cache for this SSCD will be discarded
MSG_DELETESSCD_TEXT4 = Are you sure you want to delete SSCD
MSG_DELETESSCD_CONFIRM_TITLE = Delete SSCD - Confirmation
SSCD_TEXT = SSCD
SSCD_DRIVE_GROUP_TEXT = Super Sized Cache Drive Group
# TG CR -9130 : SSD-SSC
TITLE_MAP_VIRTUAL_DRIVE = Create Super Sized Cache - Mapping Virual Drives
MAP_VIRTUAL_DRIVE_DESC = Description to map virtual drive to SSCD.
LABEL_SELECT_LOGICAL_DRIVES = (S)elect Logical Drives
BUTTON_MAP = (M)ap
BUTTON_UNMAP = (U)nMap
OPERATION_MAP_VDS_TO_SSCD = (M)ap VDs To SSCD
RECONFIG_SSC_MENU = Modify S(S)C
ADD_SSDS_DESC = Use the below table to add the SSD(s) and click next to proceed
LABEL_SELECT_UG_SSD_ADD = Select the SSD to (a)dd
REMOVE_SSDS_DESC = Use the below table to remove the SSD(s) and click next to proceed
LABEL_SELECT_UG_SSD_REMOVE = Select the SSD to remo(v)e
CHOOSE_MODE_DESC = To modify the SSC you can either Add drives or Remove drives.
SUMMARY_TEXT_SSC_NAME = SSC name
SUMMARY_TEXT_SSCD_NAME = SSCD name:
MODIFY_SSC_CONFIRM_TITLE = Modify SSC - Confirmation
TITLE_ADD_SSDS=Modify SSC - Add drive(s) to the current configuration
LABEL_SSC=SSC
TITLE_MODIFY_SSC_SUMMARY=Modify SSC - Summary Page
TITLE_REMOVE_SSDS=Modify SSC - Remove drive(s) from the current configuration
TITLE_SSC_RECONFIG_MODE_SELECTION=Modify SSC - Choose the operation
#####################################################################
# START - TG - Drive Group and Virtual Drive Expansion #
#####################################################################
MENU_VD_EXPAND = (E)xpand
TITLE_EXPAND_VD = Expand virtual drive
TITLE_EXPAND_SSCD = Expand SSCD
EXPAND_VD_DESC = <html>Use the default percentage value to occupy the remaining capacity in the \
drive group or<br>change the percentage if needed. The virtual drive expansion \
may also expand the<br>drive group if necessary.<br><br>The expansion will occur \
when you click OK. On click of cancel will terminate this<br>operation.<br><br></html>
EXPAND_SSCD_DESC = <html>Use the default percentage value to occupy the remaining capacity in the \
SSC or<br>change the percentage if needed. The SSCD expansion \
may also expand the<br>SSC if necessary.<br><br>The expansion will occur \
when you click OK. On click of cancel will terminate this<br>operation.<br><br></html>
LABEL_CURRENT_VD_CAPACITY = <html><b>Current Capacity: {0}</b></html>
AVAILABLE_CAPACITY_TO_GROW = <html><b>Available capacity: {0}</b></html>
LABEL_NEW_VD_SIZE = <html><b>Capacity of the virtual drive after expansion: {0}</b></html>
LABEL_NEW_SSCD_SIZE = <html><b>Capacity of the SSCD after expansion: {0}</b></html>
BUTTON_EXPAND_TO_MAX = E(x)pand the virtual drive to occupy remaining space in disk group
BUTTON_EXPAND_TO_PERCENT = Expand the virtual drive to (p)ercentage of available capacity
LABEL_ENTER_PERCENT = (E)nter a percentage of available capacity:
#################################################################
# END - TG - Drive Group and Virtual Drive Expansion #
#################################################################
#################################################################
# Aphrodite Changes START #
#################################################################
HOSTVIEW_SCREEN_TITLE= Host View
HOSTVIEW_DESC=<html><br> This page displays all the servers that were discovered.\
Choose a server and click on Login to start managing that server.<br>You \
will be prompted for entering host credentials while logging in.<br><br>\
Use Configure Host to configure the hosts that you want to view. <br></html>
BUTTON_DISCOVER_HOSTS_TEXT= (D)iscover Host
LABEL_IPADDRESS_TEXT=(I)P Address:
BUTTON_STOP_DISCOVERY_TEXT= S(t)op Discovery
BUTTON_CONFIGURE_HOSTS_TEXT=(C)onfigure Host...
RADIO_LOCAL_DISPLAY_TEXT =(D)isplay only the local server.
RADIO_LOCAL_DISPLAY_DESC=<html>This will display only the local server in the host view screen.\
This setting will not stop the disocvery process of the remote MSM servers.<br></html>
RADIO_FAVORITE_DISPLAY_TEXT = D(i)splay the systems from the following favorite list:
RADIO_FAVORITE_DISPLAY_DESC=<html>This option allows the user to list only the selected MSM servers in the host view screen.<br></html>
LABEL_FAVORITE_IP=(F)avorite list:
TEXT_FAVORITE_IP=(E)nter IP Address:
RADIO_NW_DISPLAY_TEXT =Dis(p)lay all the systems in the network of local server.
RADIO_NW_DISPLAY_DESC=<html>This option allows MSM server to start the discovery process of all the available \
MSM remote servers in the subnet of the mentioned <br> MSM server in the host view screen.<html>
RADIO_NCP_DISPLAY_TEXT =St(o)p discovery process of remote servers.
RADIO_NCP_DISPLAY_DESC=<html>Use this check box to manage the remote server discovery process at the local MSM server \
<html>
PANEL_DISPLAY_TITLE = Display preferences
PANEL_DISCOVER_TITLE = Server Discovery Setting
DIALOG_HOST_CONFIGURE_TITLE = Configure Host
LABEL_DISCOVERY_DESC=<html>Use this check box to manage the remote server discovery process at the local MSM server <html>
BUTTON_ADD=(A)dd
BUTTON_SAVE_SETTINGS=(S)ave Settings
DIALOG_TIPS_TO_LOGIN=<html><br>Please use your selected server's Operating System's username and password to login.<br>\
<ul><li>For full access to the server please use admin privilege on the server.<br> e.g. Administrator \
or users belong to Administrator Group under Windows <br>and root or users belong to root group under non-Windows \
platform.</li><li>For view only access to the server please use your system's username and<br> password for windows and \
non-windows platform.</li></ul>If you need access to the server or misplaced your password,please contact your <br>\
System Administrator to obtain \
login credentials.<br></html>
DIALOG_TIPS_TO_LOGIN_TITLE=Tips To Login
ICON_SPIN_PROGRESS=transitioning_icon.gif
SERVERIMAGE=ServerTool.png
REFRESHIMAGE=Refresh.png
PROGRESSIMAGE=Progress.png
CREATEVDIMAGE=CreateVD.png
EXITIMAGE=exit.png
HELPIMAGE=Help.png
TIPIMAGE=Help16.png
ADDACTION=action_add.gif
IP_ADDR_TITLE=Select IP Address
IP_ADDR_MSG=<html>Select IP Address(es) from the above list to remove</html>
DISCOVERY_STATUS_INPROGRESS=<html> Discovery is in progress...</html>
DISCOVERY_STATUS_COMPLETE = Server(s) found. Discovery completed.
DISCOVERY_STATUS_STOP = Server(s) found. Discovery stopped.
DISCOVERY_STATUS_STOPPING = Stopping the discovery...
CONFIRMATION_MSG=Do you want to apply the display changes now?
FAILURE_DISCOVERY=<html>Servers could not be \
found because server may be down or server not installed in the host system<br></html>
IP_ADDRESS_TITLE=Enter IP Address
IP_ADDRESS_MSG=<html>You cannot leave this field blank.Enter a valid IP address to proceed.</html>
VALID_IP_ADDRESS_TITLE=Enter Valid IP Address
VALID_IP_ADDRESS_MSG=<html>IP Address that you have entered is not valid.Please enter a valid <br>IP address to proceed.</html>
FAV_LIST_EMPTY_MSG=<html>Favourite list is empty. Please enter a valid IP address to proceed.</html>
REMOTE_SERVER_TITLE=Remote (s)ervers:
NO_DATA_AVAILABLE_TEXT=No data available
#################################################################
# 09M12 CR Changes START #
#################################################################
# Dimmer Switch 2.5
TITLE_DRIVE_GROUP_POWER_SAVINGS = Power Save Settings
BUTTON_POWER_SAVINGS_LEVEL_NONE = (N)o power saving
TOOLTIP_POWER_SAVINGS_LEVEL_NONE = No power saving
BUTTON_POWER_SAVINGS_LEVEL_MAX = (M)aximum power saving
TOOLTIP_POWER_SAVINGS_LEVEL_MAX = Maximum power saving
POWER_SAVINGS_INTRO_DESC = <html>Choose the power save mode. The power save setting will affect all the virtual<br>\
drives under the selected drive group.<br<br></html>
POWER_SAVINGS_LEVEL_NONE_DESC = <html>This option ensures that power savings are disabled for the virtual dives which <br>\
are part of the drive group. The drives shall always remain in active state.<br></html>
POWER_SAVINGS_LEVEL_MAX_DESC = <html>This option ensures that power savings are enabled for the virtual dives <br>\
which are part of the drive group.This setting will completely spin down <br>\
configured drives.<br<br></html>
POWER_SAVE_SETTINGS_MENU = (P)ower Save Settings
#TG CR 8499 - EKMS
EKM_SUPPORTED_ENABLE_DRIVE_SECURITY_INTRO_DESC = <html>Enabling drive security will allow you to create secure virtual drives using a security key on this controller.<br><br>\
Choose the security key management mode:<br><br></html>
EKM_SUPPORTED_CHANGE_DRIVE_SECURITY_INTRO_DESC = <html>Drive security is currently enabled. Change the drive security settings on this controller or switch<br>\
between the key management modes.
CURRENT_DRIVE_SECURITY_MODE = Current drive security mode:
CHANGE_CURRENT_SECURITY_SETTINGS = (C)hange current security settings
TOOLTIP_CURRENT_SECURITY_SETTINGS = Change current security settings
SWITCH_TO_EKM = (S)witch to EKM
SWITCH_TO_LKM = (S)witch to LKM
TOOLTIP_SWITCH_TO_EKM = Switch to EKM
TOOLTIP_SWITCH_TO_LKM = Switch to LKM
BUTTON_EKMS = (E)xternal key manager server(EKMS)
BUTTON_LKM = (L)ocal key management(LKM)
EKMS_DESC = <html>EKM provides key management support via an External Key Manager Server (EKMS).It automates and manages the life cycle<br>\
of keys, as well as the task of unlocking configurations. It is prefered when there are large number of systems deployed.<br><br></html>
LKM_DESC = <html>LKM provides key management support via controller itself.<br><br></html>
TOOLTIP_EKMS = External key manager server
TOOLTIP_LKM = Local key management
TITLE_CHOOSE_DRIVE_SECURITY_MODE = Drive Security Choose Mode
TITLE_CHANGE_SECURITY_SETTINGS = Change Security Settings
TITLE_REBOOT = System Restart Required
REBOOT_REQUIRED_DESC = <html>Please restart the system for the changes to take effect. Make sure to <br>\
stop all the I/Os and other operations before you reboot your system.<br><br></html>
REBOOT_REQUIRED_TO_IMPORT_DESC = <html>One or more EKM secured foreign drives are locked. <br><br>\
In order to import the drives, you must restart your system.Until<br>\
then all secured virtual will be locked. <br><br></html>
TITLE_ERROR_STATUS = Error Status
TITLE_CONFIRM_EKM_MODE_ENABLED = Confirm EKM Mode Enabled
CONFIRM_EKM_MODE_ENABLED_DESC = <br><br>Drive security is enabled on this controller using External Key<br>\
Management (EKM) mode.<br><br></html>
OPTIONAL_PASSPHRASE_REQUIRED_DESC = <html>Your controller currently has an optional pass phrase for additional security.<br>\
Please enter the pass phrase to proceed.<br><br></html>
TITLE_CHANGE_SECURITY_SETTINGS_OPTIONAL_PASSPHRASE = change Security Settings - Optional Passphrase
TITLE_CHANGE_SECURITY_SETTINGS_SWITCH_MODE = change Security Settings - Switch Mode
TITLE_CONFIRM_CHANGE_SECURITY_SETTINGS = Confirm Change Security Settings
CONFIRM_CHANGE_SECURITY_SETTINGS_DESC = <html>Are you sure you want to change the security settings?<br><br></html>
CONFIRM_SWITCH_TO_EKM_DESC = <html>Are you sure you want to switch to EKM mode?<br><br></html>
TITLE_UNABLE_TO_SWITCH_MODE = Unable To Switch Mode
UNABLE_TO_SWITCH_MODE_DESC = Secured configuration along with security key per drive is present.<br>\
Please clear the secured configuration to switch the mode.<br><br></html>
TITLE_SWITCH_TO_EKM_TO_IMPORT = Switch to EKM Mode
SWITCH_TO_EKM_TO_IMPORT_DESC = <html>One or more drives are secured using EKM mode. <br><br>\
In order to import the drives, you must switch to EKM mode.<br><br></html>
AUTHENTICATE_DESC = Please provide the current drive security key for authentication.
TEXT_EKM = EKM
TEXT_LKM = LKM
TEXT_NOT_APPLICABLE = N/A
TITLE_ENTER_KEY_ID = Enter Security Key Identifier
ENTER_KEY_ID_DESC = <html>The security key identifier field cannot be blank. Please enter a security key identifier<br> to proceed further.<br><br></html>
# MUI Support
AVAILABLE_CAPACITY_TEXT=Available Capacity
WASTAGE_OF_SPACE=The system has detected drives of different size. This will lead to wastage of space in one or more drives.
DRIVETYPE_MIXING=Drive type mixing:
NO_OF_VDRIVES=Number of virtual drives:
CAPACITY_OF_EACH_VD=Capacity of each virtual drive:
DRIVE_SECURITY_TEXT=Drive security:
FREE_CAP_NODE=Free Capacity Node
CAP_REQUIRED_TEXT=Capacity required
MENU_EXPANDSSCD=(E)xpand SSCD
TEXT_AUTOMATIC=Automatic
MSG_CURRENT_FW_VERSION=Current firmware version:
MSG_CURRENT_FW_VERSION_REPLACEWITH=Warning: The current firmware version will be replaced with the selected firmware!
SUPER_SZD_CACHE=Super Sized Cache
TEXT_POSSIBLE=Possible
TEXT_NOT_POSSIBLE=Not Possible
PROP_ASSOCIATE_VD=<html><b>Associated Virtual Drive(s):</b></html>
#Dashboard
DASHBOARD_TAB_TEXT = Dashboard
CONTROLLER_TEXT = Controller:
PROPERTIES_TEXT = Properties
USAGE_TEXT = Usage
BACKGROUND_OPERATIONS_TEXT = Background Operations
FEATURES_TEXT = Features
ACTIONS_TEXT = Actions
HELP_TEXT = Help
STATUS_TEXT = Status:
ENCLOSURES_TEXT = Enclosures:
BACKPLANES_TEXT = Backplanes:
DRIVES_TEXT = Drives:
DRIVE_GROUPS_TEXT = Drive groups:
VIRTUAL_DRIVES_TEXT = Virtual drives:
SERVER_PROFILE_TEXT = View server profile
STATUS_DEGRADED = Degraded
STATUS_FAILED = Failed
STATUS_NEEDS_ATTENTION = Needs attention
STATUS_OPTIMAL = Optimal
TOTAL_CAPACITY_TEXT = Total capacity:
CONFIGURED_CAPACITY_TEXT = Configured Capacity:
UNCONFIGURED_CAPACITY_TEXT = Unconfigured Capacity:
DARKBLUE_ICON = darkbluepattern.png
LIGHTBLUE_ICON = lightbluepattern.png
VDOP_PROGRESS_TEXT = (V)irtual drive operations in progress
PDOP_PROGRESS_TEXT = (D)rive operations in progress
COMPLETED_TEXT = Completed
ALARM_TEXT = Alarm:
MEGARAID_RECOVERY_TEXT = MegaRAID recovery:
SUPER_SIZED_CACHE_TEXT = Super sized cache:
DRIVE_SECURITY_TEXT = Drive security:
UNCONFGOOD_SPIN_DOWN_TEXT = Unconfigured good spin down:
HSP_SPIN_DOWN_TEXT = Hot spare spin down:
CLUSTER_TEXT = Cluster:
MORE_DETAILS_TEXT = More details
USE_MSM_TEXT = How to use MSM?
CREATE_VIRTUAL_DRIVE_TEXT = How to create virtual drive?
ENABLE_PREMIUM_FEATURE_TEXT = How to enable premium feature?
GLOSSARY_TEXT = Glossary
NEEDS_ATTENTION_ICON = NeedAtten.png
OPTIMAL_ICON = Optimal.png
DASHBOARD_CONFIRMATION_TITLE = Dashboard - Confirmation
DASHBOARD_LOGOFF_MESSAGE = Are you sure you want to log off?
WELCOME_LABEL = Welcome:
LOGOFF_LABEL = Log Off
SERVER_IP = Server IP:
SERVER_NAME = Server Name:
OS_NAME = OS name:
OS_VERSION = OS Version:
OS_ARCH = OS Architechture:
DRIVER_NAME = Driver Name:
DRIVER_VERSION = Driver Version:
APP_VER = Application Version:
HARDWARE_TEXT = HARDWARE---
CONTROLLER_TEXT = Controller:
STATUS_TEXT = Status:
FW_PACKAGE_VER = Firmware Package Version:
FW_VER = Firmware Version:
SAS_ADDRESS = SAS Address:
BBU_TEXT = BBU:
ENCL_TEXT = Enclosure(s):
DRIVE_TEXT = Drive(s):
VIRTUAL_DRIVES_TEXT = Virtual Drive(s):
BBU_HEAD = BBU---
BBU_TYPE = BBU Type:
BBU_STATUS = BBU Status:
ENCL_HEAD_TEXT = Enclosures---
PROD_NAME = PRODUCT NAME
TYPE_TEXT = TYPE
STATUS_HEAD = STATUS
DRIVES_HEAD = Drives---
CONNECTOR_HEAD = CONNECTOR
PROD_HEAD = PRODUCT ID
VENDOR_ID_HEAD = VENDOR ID
STATE_HEAD = STATE
DISK_TYPE_HEAD = DISK TYPE
CAPACITY_HEAD = CAPACITY
POWER_STATE_HEAD = POWER STATE
OPERATION_PROG_HEAD = OPERATION PROGRESS
COPYBACK_TEXT = Copyback
REBUILD_TEXT = Rebuild
VIRTUAL_DRIVES_TEXT_HEAD = Virtual Drives---
TARGET_ID_HEAD = TARGET ID
NAME_HEAD = NAME
RAID_LEVEL_HEAD = RAID LEVEL
SNAPSHOT_STATE_HEAD = SNAPSHOT STATE
CONSISTENCY_CHECK_TEXT = Consistency Check
RECONSTRUCTION_TEXT = Reconstruction
INITIALIZATION_TEXT = Initialization
FIND_NEXT = Find (N)ext
SERVER_PROFILE = (S)erver Profile:
FIND_WHAT = (F)ind What:
RESULTS_TEXT = Results :
SAVE_AS_TEXT = S(a)ve As...
CLOSE_TEXT = (C)lose
SER_PRO = Server Profile
MEGARAID_MSG = Application has finished searching the page.
FIND_TITLE = Find
PROFILE_SUMMARY = Profile_Summary_
PROFIEL_SUMM_GENERATED = Profile Summary - Generated on
ENCL_TYPE_UNKNOWN = Unknown
ENCL_TYPE_SAFTE = Safte
ENCL_TYPE_SES = Ses
ENCL_TYPE_SGPIO = Sgpio
ENCL_FAULTY = Faulty
ENCL_OK = OK
TEXT_YES = YES
TEXT_NO = NO
BBU_DEGRADED = Degraded
BBU_FAILED = Failed
BBU_HEALTHY = Healthy
BBU_NEED_ATTENTION = Need Attention
MEGARAID_RECOVERY_TEXT = MegaRAID RECOVERY
MSG_DATA_BACKUP_AND_NO_RESTART = <html>Please note that rebooting virtual drives containing boot partitions that are<br>\
undergoing RAID level migration or capacity expansion operations may<br>\
lead to undesirable boot process behavior. It is advised that these<br>\
operations complete in their entirety before the system is restarted.<br><br>\
It is advisable to backup your data before you proceed.<br><br></html>
#FanSpeed - LSIP200036675
PROPERTY_FAN_SPEED_TEXT=Speed
PROPERTY_FAN_SPEED_UNIT=RPM
SES_SPEED_CODE_LOWEST_SPEED=Lowest Speed
SES_SPEED_CODE_SECOND_LOWEST_SPEED=Second Lowest Speed
SES_SPEED_CODE_THIRD_LOWEST_SPEED=Third Lowest Speed
SES_SPEED_CODE_INTERMEDIATE_SPEED=Intermediate Speed
SES_SPEED_CODE_THIRD_HIGHEST_SPEED=Third Highest Speed
SES_SPEED_CODE_SECOND_HIGHEST_SPEED=Second Highest Speed
SES_SPEED_CODE_HIGHEST_SPEED=Highest Speed
LABEL_TEMPERATURE_SENSOR=Temperature Sensor
LABEL_POWER_TEXT=Power Supply
LABEL_VOLTAGE_SENSOR_TEXT=Voltage Sensor
#TG start
CONFIRM_DISABLE_SNAPSHOT_TITLE=Confirm Disable Snapshots
CONFIRM_DRIVECLEAN=Confirm Drive Clean Up
CONFIRM_CLEAR_SNAPSHOT_STRING=Confirm Clear Snapshots
VOLUME_REPOSITORY_IMAGE=volume_snapshot.png
REPOSITORY_VIRTUAL_DRIVE_TEXT=Snapshot Repository
SNAPSHOTS_TAB_TEXT=Snapshots
LDRIVE_OPERATION_ENABLE_SNAPSHOT=E(n)able MegaRAID Recovery
LDRIVE_OPERATION_ENABLE_SNAPSHOT_DESC=Enables Snapshot on a VD
LDRIVE_OPERATION_DISABLE_SNAPSHOT=Di(s)able MegaRAID Recovery
LDRIVE_OPERATION_DISABLE_SNAPSHOT_DESC=Disables Snapshot on a VD
LDRIVE_OPERATION_SNAPSHOT_GARBAGE_COLLECTION=Drive Clean Up (Garbage Collection)
LDRIVE_OPERATION_SNAPSHOT_GARBAGE_COLLECTION_DESC=Cleans up all the orphaned PITs
LDRIVE_OPERATION_SNAPSHOT_PIT_ROLLBACK=Roll Back Snapshot
LDRIVE_OPERATION_SNAPSHOT_PIT_ROLLBACK_DESC=Rolls back to some PIT
LDRIVE_OPERATION_SET_SNAPSHOT_PROPERTIES=Set MegaRAID Recovery Proper(t)ies
SET_SNAPSHOT_PROPERTIES_TITLE=Set MegaRAID Recovery Properties
LDRIVE_OPERATION_SET_SNAPSHOT_PROPERTIES_DESC=Sets the Snapshot Properties
PROP_SNAPSHOT_PROP=<html><b>MegaRAID Recovery Properties:</b></html>
PROPERTY_SNAPSHOTS_TEXT=MegaRAID Recovery
PROPERTY_DRIVE_CLEAN_UP_TEXT=Drive clean up (Garbage collection)
ENABLE_SNAPSHOT_TITLE=Enable MegaRAID Recovery
DISABLE_SNAPSHOT_TITLE=Disable MegaRAID Recovery
ENABLE_SNAPSHOT_CONFIRMATION_TITLE=Enable Snapshot - Confirmation
ENABLE_SNAPSHOT_DESC=<html>This base virtual drive will have an associated snapshot repository virtual drive where the snapshot-related data will be<br>\
stored. Use the suggested snapshot repository or change it if needed. Then determine the capacity to set aside in the<br>\
snapshot repository for changes to the base virtual drive. The available capacity is the largest free block of capacity on the<br>\
snapshot repository virtual drive.</html>
PERCENT_LABEL=(P)ercentage of Base:
SNAPSHOT_REPOSITORY_LABEL=(S)napshot Repository:
PERCENT_LABEL1=%
AUTO_SNAPSHOT=(T)ake snapshot on reboot
AUTO_SNAPSHOT_DESC=<html>Selecting this option will take a snapshot of the VD on boot after every successful shutdown. This feature is mainly intended to<br>\
take snapshot of boot VDs to allow restoring the OS on the VD in case of corruption. Before selecting take snapshot on reboot<br>\
on the VD, please ensure that you have copied all data to the VD</html>
AUTO_DELETE_SNAPSHOT=Enable (a)uto deletion of snapshot
AUTO_DELETE_SNAPSHOT_DESC=Selecting this option would enable auto deletion of old snapshots and allows to create a new snapshots.
CONFIRM_ENABLE_SNAPSHOT_REP=<html>Once you enable snapshots on this virtual drive, you cannot change<br>\
the allocated capacity percentage or the snapshot repository without<br>\
first disabling snapshots and losing any snapshot data.<br><br>\
Are you sure you want to enable snapshots on Virtual Drive:
CONFIRM_ENABLE_SNAPSHOT_TITLE=Confirm Enable Snapshots
CONFIRM_DISABLE_SNAPSHOT_TITLE=Confirm Disable Snapshots
CONFIRM_ENABLE_SNAPSHOT_NON_REP=<html>Once you enable snapshots on this virtual drive, you cannot change<br>\
the allocated capacity percentage or the snapshot repository without<br>\
first disabling snapshots and losing any snapshot data.<br><br>
CONFIRM_ENABLE_SNAPSHOT_NON_REP_CONT1=will become a snapshot repository.<br>\
It should now only be used for storing snapshot-related data. If there<br>\
is any existing data on
CONFIRM_ENABLE_SNAPSHOT_NON_REP_CONT2=it will be lost.<br><br>\
Are you sure you want to enable snapshots on
BASE_VIRTUAL_DRIVE_TEXT=Snapshot Base
PROPERTY_STATUS_TEXT=Status
PROPERTY_REPOSITORY_TEXT=Repository
GRAPHICAL_REP=Graphical representation of repository
CONFIRM_DISABLE_SNAPSHOT=<html>If you disable snapshots on this virtual drive, you will lose any<br>\
snapshot-related data that is currently stored on its associated<br>\
snapshot repository and you will not be able to create any new<br>\
snapshots.<br><br>\
Are you sure you want to disable snapshots on
DRIVE_CLEAN_UP_TITLE=Drive Clean Up
CONFIRM_DRIVE_CLEAN_UP=<html>You have unused snapshot virtual drives in the system. Please bring<br>\
back the drives to use those snapshot repository space or clean up the<br>\
drives so that you can use it for new snapshot repository,<br><br>\
All the old data will be lost when you clean up the drives.<br><br>\
Are you sure you want to clean up the drives?<br>\</html>
NAME=Name
PROPERTY_TIME_OF_CREATION=Time of creation
STATUS=Status
CAPACITY_USED=Capacity Used
DELETE_SNAPSHOT=(D)elete Snapshot
CREATE_VIEW=Create (V)iew
LABEL_VIEW_DETAILS=View Details
LABEL_VIEW_NAME=View name
TARGET_ID=Target ID
BUTTON_DELETE_VIEW = Dele(t)e View
CREATE_VIEW_TITLE = Create View
CREATE_VIEW_CONFIRMATION_TITLE = Create View- Confirmation
VIEW_NAME_MANDATORY_MESSAGE=You cannot leave viewname blank. Enter a view name to proceed.
SNAPSHOT_DETAILS=SnapShot Details
ASSOCIATED_REPOSITORY=Associated Repository:
SNAPSHOT_NAME_TEXT=(E)nter snapshot name:
CREATE_SNAPSHOT_BUTTON_TEXT=(C)reate Snapshot
SNAPSHOT_TIME_LINE_TEXT=Snapshots time line
SNAPSHOT_NAME_MANDATORY=Enter Snapshot Name - Mandatory
SNAPSHOT_NAME_MANDATORY_MESSAGE=You cannot leave this field blank. Enter a snapshot name to proceed.
PROPERTY_DRIVE_CLEAN_UP_TEXT=Drive clean up(Garbage collection)
PROPERTY_ASSOCIATED_BASEVD_TEXT=<html><b>Associated base virtual drives:</b></html>
PROPERTY_TOTAL_CAPACITY_TEXT=Total capacity
PROPERTY_NUM_HOLES_TEXT=Number of Holes
PROPERTY_PERCENT_CAPACITY_USED_TEXT=Percentage of Capacity used
PROPERTY_PERCENT_CAPACITY_REMAINING_TEXT=Percentage of Capacity remaining
NO_PITS_TEXT=No PITs found
ENTER_VIEW_NAME_LABEL=(E)nter View name:
CAPACITY_USED=Capacity used
CAPACITY_REMAINING=Capacity remaining
STATE=State
ROLLBACK_PROGRESS=RollBack Progress
INSUFFICIENT_CAPACITY=<html>You do not have any virtual drives available to store the<br>\
snapshot data. You need to create a new virtual drive with<br>\
sufficient capacity to designate as a snapshot repository.<br></html>
INSUFFICIENT_CAPACITY_TITLE=Insufficient Capacity
LDRIVE_OPERATION_CREATE_SNAPSHOT=(C)reate Snapshots
LDRIVE_OPERATION_CREATE_SNAPSHOT_DESC=Creates Snapshots on set of VDs.
LDRIVE_OPERATION_CREATE_SNAPSHOT_TITLE=Create Snapshots
CREATE_CTS_DESC=Select the base virtual drives for which you want to create concurrent snapshots.
SELECT_BASE_VD_TEXT=(S)elect base virtual drives:
LDRIVE_OPERATION_DELETE_SNAPSHOT=Clea(r) Snapshots
LDRIVE_OPERATION_DELETE_SNAPSHOT_DESC=Clears All the Snapshots of the VD.
CLEAR_SNAPSHOTS_TITLE=(C)lear Snapshots
CONFIRM_CLEAR_SNAPSHOT=<html>If you clear snapshots on this virtual drive, you will lose any<br>\
snapshot-related data that is currently stored on its associated<br>\
snapshot repository.<br><br>\
Are you sure you want to clear snapshots on
CREATE_CONSISTENCY_SET_SUCCESSFUL=<html>The snapshots were created successfully. Please select the<br>\
snapshot base to see the corresponding details of the<br>\
snapshots.<br></html>
CONSISTENCY_SET_CREATED_TITLE=Confirmation Snapshot Created
CREATE_VIEW_DESC=<html>Determine the capacity to set aside in the snapshot by specifying a percentage of<br>\
the base virtual drive capacity.<br></html>
SNAPSHOT_STATE=Snapshot State
SNAPSHOT_STATE_OPERATIONAL=Operational
SNAPSHOT_STATE_NONOPERATIONAL=Non Operational
CAPACITY_LEFT=Capacity Left
SNAP_NAME=Snapshot Name
SCD=Snapshot Creation Date
AUTO_SNAP=Snapshot on Reboot
AUTO_DOS=Auto Deletion of oldest Snapshot
PROPERTY_OS_DISK_NAME=OS disk name
PROPERTY_ENABLED = Enabled
PROPERTY_DISABLED = Disabled
DELETE_VIEW_TITLE = Delete View
CONFIRM_DELETE_VIEW = <html>You have chosen to delete the View.All the data <br>\
related to this view will be lost.<br><br>\
Are you sure you want to delete the View?</html>
DELETE_SNAPSHOT_TITLE = Delete Snapshot
CONFIRM_DELETE_SNAPSHOT = <html>You have chosen to delete the Snasphot.All the data <br>\
related to this Snapshot will be lost.<br><br>\
Are you sure you want to delete the Snapshot?</html>
CREATE_SNAPSHOT_TITLE = Create Snapshot
CONFIRM_CREATE_SNAPSHOT = <html>You have chosen to Create a Snapshot. This operation<br>\
will delete the Oldest Snapshot.<br><br>\
Are you sure you want to delete the Snapshot?</html>
NO_REP_SPACE=<html>You have reached
NO_REP_SPACE_1=of snapshot repository. Please take back up<br>\
of your snapshot base data to avoid data loss or delete the oldest<br>\
snapshot to get free capacity.</html>
RUNNING_OUT_OF_SPACE_TITLE=Runing Out Of Space
NO_VIEW_SPACE_1=of View Spcae in snapshot repository. Please take back up<br>\
of your View data to avoid data loss.</html>
SNAPSHOT_DISABLED_TITLE=Snapshots Disabled.
NO_SPACE=<html>Snapshots are Non-operational since there is no space in<br>\
the repository. Please disable the Snapshots on the VD.</html>
LABEL_AVAILABLE_CAPACITY=(A)vailable Capacity
CREATE_SNAPSHOT_NOTE = <html><b>Note: </b>This will create a snapshot in the snapshot <br>\
time line. Once it is reached the maximum supported <br>\
count, Create snapshot button will be disabled.</html>
SNAP_BASE_DETAILS = Snapshot Base Details
DELETE_SNAPSHOT_NOTES = <html><b>Note: </b>Only oldest snapshot <br> information can be deleted</html>
#TG end
#SSD-SSC
SSC_DRIVEGROUP=SSC Drive Group
OPERATION_CREATE_SSCD = Cr(e)ate SSCD
SSC_HOLE_UNCONFIGPD_SELECTION_PAGE_TITLE = Create Super Sized Cached - Allocate capacity
SSC_DESC_WHERE_T0_CREATE = Where do you want to create the new SSCD?
SSC_LABEL_USE_FREE_DRIVES = Use (u)nconfigured SSD drives(create new SSC drive group)
SSC_DRIVE_GROUP_SELECTION_PAGE_TITLE = Create Super Sized Cache Drive group
SSC_LABEL_SELECT_UG_DRIVES = Select (u)nconfigured SSD drives:
SSC_LABEL_DRIVE_GROUPS = SSC Drive (g)roups:
SSC_BUTTON_CREATE_DG = (C)reate SSC Drive Group
SSC_ADVANCED_VD_CREATION_TITLE = Create Super Sized Cache Drive
SSC_LABEL_SPECIFY_PARAMS = Specify parameters for the new SSCD.
LABEL_SSCD_NAME = (S)SCD name:
SSCD_CREATE = (C)reate
SSCD_UPDATE = (U)pdate
SSCD_REMOVE = (R)emove
SSC_CREATE_VD_CONFIG_SUMMARY_TITLE = Create Super Sized Cache - Summary
SSC_CONFIG_SUMMARY_DESC = Review the summary and go back if you need to make corrections. The SSCD(s) \
will be created when you click finish.
SSC_CONFIG_SUCCESS_TITLE = Create Super Sized Cache Disk - Complete
SSC_CONFIG_SUCCESS_MSG = The SSCD(s) were successfully created.
SSC_SUMMARY_TEXT_DG_NAME = SSC Drive group name:
SSC_SUMMARY_TEXT_VD_NAME = SSCD {0} name:
TITLE_SELECT_RAID_LEVEL_AND_ENCRYTION = RAID and Encryption
SSC_GROUP_IMAGE = sscds_group.png
SSCD_VD_IMAGE = sscd_vd.png
SSCD_MAPPED_VD = sscdmapedvd.png
SSCD_TEXT = Super Sized Cache Disks
PROPERTY_SSCDSTATE_TEXT = SSCD State
MSG_DELETESSCD_TEXT1 = <html>You have chosen to delete SSCD
MSG_DELETESSCD_TEXT2 = All data<br> on the SSCD will be lost
MSG_DELETESSCD_TEXT3 = and the preserved<br> cache for this SSCD will be discarded
MSG_DELETESSCD_TEXT4 = Are you sure you want to delete SSCD
MSG_DELETESSCD_CONFIRM_TITLE = Delete SSCD - Confirmation
SSCD_TEXT = SSCD
SSCD_DRIVE_GROUP_TEXT = Super Sized Cache Drive Group
# TG CR -9130 : SSD-SSC
TITLE_MAP_VIRTUAL_DRIVE = Create Super Sized Cache - Mapping Virual Drives
MAP_VIRTUAL_DRIVE_DESC = Description to map virtual drive to SSCD.
LABEL_SELECT_LOGICAL_DRIVES = (S)elect Logical Drives
BUTTON_MAP = (M)ap
BUTTON_UNMAP = (U)nMap
OPERATION_MAP_VDS_TO_SSCD = (M)ap VDs To SSCD
RECONFIG_SSC_MENU = Modify S(S)C
ADD_SSDS_DESC = Use the below table to add the SSD(s) and click next to proceed
LABEL_SELECT_UG_SSD_ADD = Select the SSD to (a)dd
REMOVE_SSDS_DESC = Use the below table to remove the SSD(s) and click next to proceed
LABEL_SELECT_UG_SSD_REMOVE = Select the SSD to remo(v)e
CHOOSE_MODE_DESC = To modify the SSC you can either Add drives or Remove drives.
SUMMARY_TEXT_SSC_NAME = SSC name
SUMMARY_TEXT_SSCD_NAME = SSCD name:
MODIFY_SSC_CONFIRM_TITLE = Modify SSC - Confirmation
TITLE_ADD_SSDS=Modify SSC - Add drive(s) to the current configuration
LABEL_SSC=SSC
TITLE_MODIFY_SSC_SUMMARY=Modify SSC - Summary Page
TITLE_REMOVE_SSDS=Modify SSC - Remove drive(s) from the current configuration
TITLE_SSC_RECONFIG_MODE_SELECTION=Modify SSC - Choose the operation
#####################################################################
# START - TG - Drive Group and Virtual Drive Expansion #
#####################################################################
MENU_VD_EXPAND = (E)xpand
TITLE_EXPAND_VD = Expand virtual drive
TITLE_EXPAND_SSCD = Expand SSCD
EXPAND_VD_DESC = <html>Use the default percentage value to occupy the remaining capacity in the \
drive group or<br>change the percentage if needed. The virtual drive expansion \
may also expand the<br>drive group if necessary.<br><br>The expansion will occur \
when you click OK. On click of cancel will terminate this<br>operation.<br><br></html>
EXPAND_SSCD_DESC = <html>Use the default percentage value to occupy the remaining capacity in the \
SSC or<br>change the percentage if needed. The SSCD expansion \
may also expand the<br>SSC if necessary.<br><br>The expansion will occur \
when you click OK. On click of cancel will terminate this<br>operation.<br><br></html>
LABEL_CURRENT_VD_CAPACITY = <html><b>Current Capacity: {0}</b></html>
AVAILABLE_CAPACITY_TO_GROW = <html><b>Available capacity: {0}</b></html>
LABEL_NEW_VD_SIZE = <html><b>Capacity of the virtual drive after expansion: {0}</b></html>
LABEL_NEW_SSCD_SIZE = <html><b>Capacity of the SSCD after expansion: {0}</b></html>
BUTTON_EXPAND_TO_MAX = E(x)pand the virtual drive to occupy remaining space in disk group
BUTTON_EXPAND_TO_PERCENT = Expand the virtual drive to (p)ercentage of available capacity
LABEL_ENTER_PERCENT = (E)nter a percentage of available capacity:
#################################################################
# END - TG - Drive Group and Virtual Drive Expansion #
#################################################################
#################################################################
# 09M12 CR Changes START #
#################################################################
# Dimmer Switch 2.5
TITLE_DRIVE_GROUP_POWER_SAVINGS = Power Save Settings
BUTTON_POWER_SAVINGS_LEVEL_NONE = (N)o power saving
TOOLTIP_POWER_SAVINGS_LEVEL_NONE = No power saving
BUTTON_POWER_SAVINGS_LEVEL_MAX = (M)aximum power saving
TOOLTIP_POWER_SAVINGS_LEVEL_MAX = Maximum power saving
POWER_SAVINGS_INTRO_DESC = <html>Choose the power save mode. The power save setting will affect all the virtual<br>\
drives under the selected drive group.<br<br></html>
POWER_SAVINGS_LEVEL_NONE_DESC = <html>This option ensures that power savings are disabled for the virtual dives which <br>\
are part of the drive group. The drives shall always remain in active state.<br></html>
POWER_SAVINGS_LEVEL_MAX_DESC = <html>This option ensures that power savings are enabled for the virtual dives <br>\
which are part of the drive group.This setting will completely spin down <br>\
configured drives.<br<br></html>
POWER_SAVE_SETTINGS_MENU = (P)ower Save Settings
#TG CR 8499 - EKMS
EKM_SUPPORTED_ENABLE_DRIVE_SECURITY_INTRO_DESC = <html>Enabling drive security will allow you to create secure virtual drives using a security key on this controller.<br><br>\
Choose the security key management mode:<br><br></html>
EKM_SUPPORTED_CHANGE_DRIVE_SECURITY_INTRO_DESC = <html>Drive security is currently enabled. Change the drive security settings on this controller or switch<br>\
between the key management modes.
CURRENT_DRIVE_SECURITY_MODE = Current drive security mode:
CHANGE_CURRENT_SECURITY_SETTINGS = (C)hange current security settings
TOOLTIP_CURRENT_SECURITY_SETTINGS = Change current security settings
SWITCH_TO_EKM = (S)witch to EKM
SWITCH_TO_LKM = (S)witch to LKM
TOOLTIP_SWITCH_TO_EKM = Switch to EKM
TOOLTIP_SWITCH_TO_LKM = Switch to LKM
BUTTON_EKMS = (E)xternal key manager server(EKMS)
BUTTON_LKM = (L)ocal key management(LKM)
EKMS_DESC = <html>EKM provides key management support via an External Key Manager Server (EKMS).It automates and manages the life cycle<br>\
of keys, as well as the task of unlocking configurations. It is prefered when there are large number of systems deployed.<br><br></html>
LKM_DESC = <html>LKM provides key management support via controller itself.<br><br></html>
TOOLTIP_EKMS = External key manager server
TOOLTIP_LKM = Local key management
TITLE_CHOOSE_DRIVE_SECURITY_MODE = Drive Security Choose Mode
TITLE_CHANGE_SECURITY_SETTINGS = Change Security Settings
TITLE_REBOOT = System Restart Required
REBOOT_REQUIRED_DESC = <html>Please restart the system for the changes to take effect. Make sure to <br>\
stop all the I/Os and other operations before you reboot your system.<br><br></html>
REBOOT_REQUIRED_TO_IMPORT_DESC = <html>One or more EKM secured foreign drives are locked. <br><br>\
In order to import the drives, you must restart your system.Until<br>\
then all secured virtual will be locked. <br><br></html>
TITLE_ERROR_STATUS = Error Status
TITLE_CONFIRM_EKM_MODE_ENABLED = Confirm EKM Mode Enabled
CONFIRM_EKM_MODE_ENABLED_DESC = <br><br>Drive security is enabled on this controller using External Key<br>\
Management (EKM) mode.<br><br></html>
OPTIONAL_PASSPHRASE_REQUIRED_DESC = <html>Your controller currently has an optional pass phrase for additional security.<br>\
Please enter the pass phrase to proceed.<br><br></html>
TITLE_CHANGE_SECURITY_SETTINGS_OPTIONAL_PASSPHRASE = change Security Settings - Optional Passphrase
TITLE_CHANGE_SECURITY_SETTINGS_SWITCH_MODE = change Security Settings - Switch Mode
TITLE_CONFIRM_CHANGE_SECURITY_SETTINGS = Confirm Change Security Settings
CONFIRM_CHANGE_SECURITY_SETTINGS_DESC = <html>Are you sure you want to change the security settings?<br><br></html>
CONFIRM_SWITCH_TO_EKM_DESC = <html>Are you sure you want to switch to EKM mode?<br><br></html>
TITLE_UNABLE_TO_SWITCH_MODE = Unable To Switch Mode
UNABLE_TO_SWITCH_MODE_DESC = Secured configuration along with security key per drive is present.<br>\
Please clear the secured configuration to switch the mode.<br><br></html>
TITLE_SWITCH_TO_EKM_TO_IMPORT = Switch to EKM Mode
SWITCH_TO_EKM_TO_IMPORT_DESC = <html>One or more drives are secured using EKM mode. <br><br>\
In order to import the drives, you must switch to EKM mode.<br><br></html>
AUTHENTICATE_DESC = Please provide the current drive security key for authentication.
TEXT_EKM = EKM
TEXT_LKM = LKM
TEXT_NOT_APPLICABLE = N/A
TITLE_ENTER_KEY_ID = Enter Security Key Identifier
ENTER_KEY_ID_DESC = <html>The security key identifier field cannot be blank. Please enter a security key identifier<br> to proceed further.<br><br></html>
# MUI Support
AVAILABLE_CAPACITY_TEXT=Available Capacity
WASTAGE_OF_SPACE=The system has detected drives of different size. This will lead to wastage of space in one or more drives.
DRIVETYPE_MIXING=Drive type mixing:
NO_OF_VDRIVES=Number of virtual drives:
CAPACITY_OF_EACH_VD=Capacity of each virtual drive:
DRIVE_SECURITY_TEXT=Drive security:
FREE_CAP_NODE=Free Capacity Node
CAP_REQUIRED_TEXT=Capacity required
MENU_EXPANDSSCD=(E)xpand SSCD
TEXT_AUTOMATIC=Automatic
MSG_CURRENT_FW_VERSION=Current firmware version:
MSG_CURRENT_FW_VERSION_REPLACEWITH=Warning: The current firmware version will be replaced with the selected firmware!
SUPER_SZD_CACHE=Super Sized Cache
TEXT_POSSIBLE=Possible
TEXT_NOT_POSSIBLE=Not Possible
PROP_ASSOCIATE_VD=<html><b>Associated Virtual Drive(s):</b></html>
#MEDUSA 8361
PROPERTY_EXPFWVERSION_TEXT = Expander Firmware Version
LABEL_SELECT_CAPACITY=S(e)lect Capacity
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.