; ; Installation inf file for My Cinema U-Series Infrared receiver driver ; Copyright 2007, ASUSTeK [Version] Signature = "$CHICAGO$" Class = HIDClass ClassGuid = {745a17a0-74d3-11d0-b6fe-00a0c90f57da} Provider = %ASUS% DriverVer = 09/07/2008,2.0.1.3 CatalogFile = u3khrc.cat ;===================================================================== [SourceDisksNames] 1 = %INSTALLATION_DISK%,,,,, [SourceDisksFiles] u3khrc.sys = 1 [DestinationDirs] MODRC_CopyFilesSys = 12, [ControlFlags] ExcludeFromSelect = * ExcludeFromSelect.NT = * ;===================================================================== [Manufacturer] %MfgName% = ASUSTeK [ASUSTeK] %MODRC_DeviceDesc% = MODRC, HID\VID_0B05&PID_1736&FN_01 %MODRC_DeviceDesc% = MODRC, HID\VID_0B05&PID_177A&FN_01 ;===================================================================== [MODRC.NT] CopyFiles = MODRC_CopyFilesSys AddReg = MODRC_AddReg [MODRC.NT.Services] AddService = u3khrc,0x00000002,MODRC_ServiceInstall,,, [MODRC.NT.HW] AddReg = MODRC_HW_AddReg [MODRC_CopyFilesSys] u3khrc.sys [MODRC_AddReg] HKR,,DevLoader,,*ntkern HKR,,NTMPDriver,,u3khrc.sys [MODRC_ServiceInstall] DisplayName = %MODRC_FriendlyName% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\u3khrc.sys ;===================================================================== [MODRC_HW_AddReg] HKR,,"ReportDescriptor",0x00000001,\ \ ; Consumer Controls 0x05, 0x0c, \ ; Usage Page (Consumer Controls), 0x09, 0x01, \ ; Usage (Consumer Control), 0xA1, 0x01, \ ; Collection (Application), 0x85, 0x02, \ ; Report Id (1) 0x19, 0x00, \ ; Usage Minimum (0), 0x2a, 0x3c, 0x02, \ ; Usage Maximum (23c) 0x15, 0x00, \ ; Logical Minimum (0), 0x26, 0x3c, 0x02, \ ; Logical Maximum (23c) 0x95, 0x01, \ ; Report Count (1), 0x75, 0x10, \ ; Report Size (16), 0x81, 0x00, \ ; Input (Data, Array), 0xC0, \ ; End Collection \ ; MS Vendor controls 0x06, 0xbc, 0xff, \ 0x09, 0x88, \ 0xa1, 0x01, \ 0x85, 0x04, \ 0x15, 0x00, \ 0x25, 0x01, \ 0x09, 0x0d, \ ;0x01 Home 0x09, 0x25, \ ;0x02 TV 0x09, 0x46, \ ;0x04 0x09, 0x47, \ ;0x08 0x09, 0x48, \ ;0x10 0x09, 0x49, \ ;0x20 0x09, 0x4A, \ ;0x40 0x09, 0x24, \ ;0x80 0x09, 0x5a, \ ; 0x01 TT 0x09, 0x5b, \ ; 0x02 R 0x09, 0x5c, \ ; 0x04 G 0x09, 0x5d, \ ; 0x08 Y 0x09, 0x5e, \ ; 0x10 B 0x09, 0x5f, \ ; 0x10 0x09, 0x60, \ ; 0x20 0x09, 0x28, \ ; 0x40 0x75, 0x01, \ 0x95, 0x10, \ 0x81, 0x06, \ 0xc0, \ \ ; Standby button 0x05, 0x01, \ ; Usage Page (Generic Desktop), 0x09, 0x80, \ ; Usage (System Control), 0xa1, 0x01, \ ; Collection (Application), 0x85, 0x03, \ ; Report Id (3) 0x19, 0x81, \ ; Usage Minimum (0x81), 0x29, 0x83, \ ; Usage Maximum (0x83), 0x25, 0x01, \ ; Logical Maximum(1), 0x75, 0x01, \ ; Report Size (1), 0x95, 0x03, \ ; Report Count (3), 0x81, 0x02, \ ; Input 0x75, 0x01, \ ; Report Size (1), 0x95, 0x05, \ ; Report Count (5), 0x81, 0x01, \ ; Input (Constant), 0xC0, \ ; End Collection \ ; Keyboard 0x05, 0x01, \ ; Usage Page (Generic Desktop), 0x09, 0x06, \ ; Usage (Keyboard), 0xA1, 0x01, \ ; Collection (Application), 0x85, 0x01, \ ; Report Id (4) 0x05, 0x07, \ ; usage page key codes 0x19, 0xe0, \ ; usage min left control 0x29, 0xe8, \ ; usage max keyboard right gui 0x75, 0x01, \ ; report size 1 0x95, 0x08, \ ; report count 8 0x81, 0x02, \ ; input (Variable) 0x19, 0x00, \ ; usage min 0 0x29, 0x90, \ ; usage max 91 0x26, 0xff, 0x00, \ ; logical max 0xff 0x75, 0x08, \ ; report size 8 0x95, 0x01, \ ; report count 1 0x81, 0x00, \ ; Input (Data, Array), 0xC0 \ ; End Collection HKR,,"ReportDataSize",0x00010001,0x00000003 HKR,,"ReportMappingTable",0x00000001,\ 0x01,0xC4,0xC0,0x14, 0x0B, 0x01,0x00,0x51, \ ; down arrow 0x01,0xC4,0xC0,0x12, 0x0B, 0x01,0x00,0x52, \ ; up arrow 0x01,0xC4,0xC0,0x1A, 0x0B, 0x01,0x00,0x4f, \ ; right arrow 0x01,0xC4,0xC0,0x0C, 0x0B, 0x01,0x00,0x50, \ ; left arrow 0x01,0xC4,0xC0,0x13, 0x0B, 0x01,0x00,0x28, \ ; return 0x01,0xC4,0xC0,0x17, 0x0B, 0x01,0x04,0x3d, \ ; Close 0x01,0xC4,0xC0,0x15, 0x0B, 0x01,0x04,0x28, \ ; FULL Screen 0x01,0xC4,0xC0,0x1D, 0x0B, 0x01,0x01,0x0F, \ ; Recall \ 0x01,0xC4,0xC0,0x19, 0x0B, 0x02,0x24,0x02, \ ; AC Back \ 0x01,0xC4,0xC0,0x11, 0x0B, 0x02,0xb0,0x00, \ ; AC Media play 0x01,0xC4,0xC0,0x11, 0x0B, 0x02,0xb1,0x00, \ ; AC Media pause 0x01,0xC4,0xC0,0x16, 0x0B, 0x02,0xb2,0x00, \ ; AC Media record 0x01,0xC4,0xC0,0x18, 0x0B, 0x02,0xb3,0x00, \ ; AC FF 0x01,0xC4,0xC0,0x0A, 0x0B, 0x02,0xb4,0x00, \ ; AC RW 0x01,0xC4,0xC0,0x10, 0x0B, 0x02,0xb7,0x00, \ ; AC Media Stop \ 0x01,0xC4,0xC0,0x0D, 0x0B, 0x02,0xe9,0x00, \ ; AC volume up 0x01,0xC4,0xC0,0x0E, 0x0B, 0x02,0xea,0x00, \ ; AC volume down 0x01,0xC4,0xC0,0x0F, 0x0B, 0x02,0xe2,0x00, \ ; AC volume mute \ 0x01,0xC4,0xC0,0x1B, 0x0B, 0x02,0x9c,0x00, \ ; AC channel up 0x01,0xC4,0xC0,0x1C, 0x0B, 0x02,0x9d,0x00, \ ; AC channel down \ 0x01,0xC4,0xC0,0x0B, 0x0B, 0x04,0x01,0x00, \ ; eHome launch 0x01,0xC4,0xC0,0x09, 0x0B, 0x04,0x02,0x00 \ ; My TV HKR,,"KeyEmulationMask",0x00000001,\ 0xFF,0x00,0x00 ; No Event HKR,,"SkipRepeatCounter",0x00010001,0x00000004 HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Remote Controls","HID\VID_0B05&PID_1721&FN_01",0x00000000,"" ; For Media Center compatibility only HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Remote Controls","HID\VID_0B05&PID_1736&FN_01",0x00000000,"" ; For Media Center compatibility only ;===================================================================== [Strings] ASUS = "ASUSTeK COMPUTER INC." MfgName = "ASUSTeK COMPUTER INC." MODRC_DeviceDesc = "Infrared Receiver" MODRC_FriendlyName = "ASUS Infrared Receiver" INSTALLATION_DISK = "ASUS My Cinema U3000 Hybrid Installation Disk" SERVICE_KERNEL_DRIVER = 0x1 SERVICE_DEMAND_START = 0x3 SERVICE_ERROR_NORMAL = 0x1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.