###################################################################################
Title: PG8168B
Version: V 1.00
Released By: Vika Yen
Release Date: 2005.08.03
Changed File: pg8168b.c,
CLI.c
Reason:
1. Incresing serial number by one only when the EEPROM is programmed successfully.
2. initialize 93C46 Command
3. Set new Phy parameters
4. Update NODEID at MAC I/O register IDR0~IDR5
5. Detect ID Code "8129H" from map file
6. Check Hardwarw vender ID
################################################################################
Title: PG8168B
Version: V1.01
Released By: Vika Yen
Release Date: 2005.08.19
Changed File: CLI.c
8168B.cfg
8168B.MAP
Reason:
1. Modify ROMCONF of EEPROM value from "0A" to "20".
2. Change 8168.cfg to 8168B.cfg
################################################################################
Title: PG8168
Version: V1.02
Released By: Vika Yen
Release Date: 2005.09.09
Changed File: CLI.c
PG8168b.c
8168.cfg
8168.MAP
Reason:
1. PG8168B.exe rename to PG8168.exe
2. remove card bus option
################################################################################
Title: PG8168
Version: V1.03
Released By: Vika Yen
Release Date: 2005.10.12
Changed File: CLI.c
PG8168.c
8168.cfg
8168.MAP
Reason: Modify GMAC feature with RTL8168B
Comment: 1. Modify GMAC EEPROM values with 8168.cfg
################################################################################
Title: PG8168
Version: V1.05
Released By: Vika Yen
Release Date: 2006.01.02
Changed File: CLI.c
PG8168.c
8168.cfg
8168.MAP
Reason:
Comment: 1. Modify Config0 values
2. Modify express device capability value
3. Rescue illegal EEPROM.
################################################################################
Title: PG8168
Version: V1.06
Released By: Vika Yen
Release Date: 2006.03.06
Changed File: CLI.c
PG8168.c
Reason:
Comment: 1. Support indicating specific card to PG.
################################################################################
Title: PG8168
Version: V1.07
Released By: Vika Yen
Release Date: 2006.05.30
Changed File: CLI.c
PG8168.c
Reason:
Comment: 1. Avoid hardware miscontiguration due to PG fail
2. Update NodeID to IDR0~5
3. Add /v function that View information with each adapter
################################################################################
Name: PG8168
Version: V 1.08
Released By: Vika yen
Release Date: 2006.10.30
Changed File: PG8169.C
CLI.C
PCI.c
Reason: 1. Support 93C66 that type of EEPROM
2. Add /b function that dump binary data to file
3. Add /vMAC function that display SVID, SDID and MACID with each Adapter
4. Modify Config1 and Config3 EEPROM values with 8168.cfg
5. EEPROM Clock must be initial (EECS,EESK be low)
################################################################################
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.