English.ini Driver File Contents (EPU4_V10100_XPVistaWin7.zip)

ÿþ[Translations]

Auto = Auto

Turbo = Turbo

High performance = High Performance

Max power saving = Max Power Saving

Mode Setting = Mode Setting

Mode = Mode

Current Status = Current Status

Tranquility = Tranquility

Performance = Performance

Reliability = Reliability

Convenience = Convenience

Energy Saved = Energy Saved

Current = Current

Total = Total

Total reduced CO2 Emission = Total reduced CO2 Emission

Reduced CO2 Emission = Reduced CO2 Emission

Since = Since

Calibrate = Calibrate

Setting = Setting

OK = OK

Cancel = Cancel

Default = Default

Exit = Exit

vCore Voltage Downgrade = vCore Voltage Downgrade

VDDNB Voltage Downgrade = VDDNB Voltage Downgrade

CPU Loadline = CPU Loadline

Turn Off hard disks = Turn Off hard disks

AI Nap Idle Time = AI Nap Idle Time

Turn Off Screen = Turn Off Screen

Fan Control = Fan Control

Small = Small

Medium = Medium

Heavy = Heavy

Keep BIOS Setting = Keep BIOS Setting

Slow = Slow

Quiet = Quiet

After %1 mins = After %1 mins

After %1 hours = After %1 hours

After 1 min = After 1 min

After 1 hour = After 1 hour

Never = Never

ASUS AI Suite required = ASUS AI Suite required

OFF = OFF

Voltage = Voltage

Yes = Yes

No = No

FirstRunEPU-4 = You are running EPU-4 Engine for the first time.Please close all running programs and calibrate the EPU function.

SetToAutoCalibrate = Before setting to Auto Mode, you need to calibrate the EPU function. Close all running programs before EPU calibration.

BackToDefault = Due to the unstable adjustment, the EPU-4 Engine is automatically restored to its default setting.

ChangeSetting = The system might become unstable after this setting. Are you sure you want to continue?

CalibrateAfterSetting = You need to calibrate again after the CPU voltage or other voltage settings are changed. Please close all running programs and calibrate the EPU function.

InformCalibration = Close all running programs before calibrating the EPU function.

Calibrating, please wait... = Calibrating, please wait...

ConflictAISuite = EPU-4 Engine cannot run simultaneously with AI Suite. Please close AI Suite first before running the EPU-4 Engine.

VGAWindow = No VGA detected. Please install a compatible VGA card or install and enable the ASUS SmartDoctor. For the list of compatible VGA cards, refer to 

Current CPU Power = Current CPU Power

Total CPU Energy Saved = Total CPU Energy Saved

Show tips = Show tips

Auto Mode = Auto Mode

High Performance Mode = High Performance Mode

Max Power Saving Mode = Max Power Saving Mode

Current CPU Energy Saved = Current CPU Energy Saved

Clear = Clear





CanNotRunUnderBiosOc =  EPU cannot launch under the current overclocking settings. Please restart your system, load the EPU default settings in BIOS, and launch EPU again.

CanNotRunUnderApOc =  EPU cannot launch under the current overclocking settings. Please restart your system to clear TurboV/TurboKey overclocking settings and launch EPU again.

CanNotRunUnderTurboV = Please close the TurboV window before launching EPU.



SetToHighPerformanceBeforeExit = You are now exiting EPU, and EPU will automatically switch back to High Performance mode.

AreYouSure = Are you sure you want to exit?

AutoRun = Automatically launch this program on Windows startup.

Clear CO2 Emission = Clear CO2 Emission





OcMode = EPU-4 Engine cannot run on overclocking mode. Please turn off the overclocking mode from the BIOS setup or use the ASUS overclocking utilities.

Run at system startup = "Run at system startup"







TweakItConfirm = The TweakIt function is disabled when EPU-4 Engine is set to Auto Mode. To enable TweakIt, set EPU-4 Engine to Turbo Mode!

SureContinue = Are you sure you want to continue?

TweakItIsDisabled = TweakIt is disabled. Set EPU-4 Engine to Turbo Mode before using TweakIt.

CannotLaunchOverclocking = EPU cannot launch under system overclocking. Please restart your system.



CanNotRunUnderOverclockingmode = EPU-4 Engine cannot run on overclocking mode. Please turn off the overclocking mode from the BIOS setup or use the ASUS overclocking utilities.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.96