1. Audio_IDT_V6_10_0_6296.zip Driver
2. LUCID.INI File Contents

LUCID.INI Driver File Contents (Audio_IDT_V6_10_0_6296.zip)

[Models]
HDAUDIO\FUNC_01&VEN_111D&DEV_7605=this
Default=this
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\IDT=yes
[CopyFiles.32]
stlang.dll = 0x25
idtsg.cpl = 0x25
[CopyFiles.64]
stlang64.dll = 0x25
idtsg64.cpl = 0x25
[Apps]
[RegisterDlls.32]
STacAPI.dll
[RegisterDlls.64]
STaPI64x.dll
[StartServices.32]
stacsv.exe -r
[StartServices.64]
stacsv64.exe -r
[HKLM\Software\IDT\State\Shared]
ShowEventDialog = dword: 1
[HKLM\Software\IDT\Config\Shared]
Config_Oem      = dword: 2
PollingPeriod   = dword: 1000
RecordPriority = dword: 1
[HKLM\Software\IDT\Config\STacsv]
HwSpkCfg       = dword: 1
MicRetasking 	= dword: 0
[HKLM\Software\IDT\Config\SysTray]
HideTrayIcon    = dword: 0
[HKLM\Software\IDT\Config\SysTray.32]
ControlPanel    = "IDTSG.cpl"
HideTrayIcon   	= dword: 0
Automatic      	= dword: 0
PopUpType       = dword: 2
[HKLM\Software\IDT\Config\SysTray.64]
ControlPanel    = "IDTSG64.cpl"
HideTrayIcon   	= dword: 0
Automatic      	= dword: 0
PopUpType       = dword: 2
[HKLM\SOFTWARE\IDT\Config\UI]
Config_Tab                           = dword: 0xA
Config_Adv                           = dword: 0x800001
Config_Pwr                           = dword: 0x9
Config_Spk                           = dword: 0x30
[HKLM\Software\IDT\State\UI]
Config_DefPage 	= "PORTMAP"
Config_Update		=dword:0x00000001
[HKR]
CodecName = "92HD81"
[HKR\Settings]
InitVerbs						= hex: 18,F9,17,00,0E,F4,17,00
TraceFlags						= dword: 0x89B3
CPL_SaveExtraPower				= hex: 1
CPL_MaySwitchExtAmpPowerState	= hex: 1
EnablePcBeepAtCd  				= hex: 0
CPL_SecondsAfter 				= dword: 30
AfgPowerStatePolicy 			= hex: 2
CPL_ControlAfgPowerState 		= hex: 0x1
KeepAnalogLoopbackAlwaysOn = hex: 0
DelayInMsAfterPortDisabling 	= dword: 0x40
RenderPathOptimization = hex: 1
EnableExtraD3PowerSaving = hex: 0
AfgPwrSeqDelayMs = dword: 16
AfgPwrSeqDelay2Ms = dword: 1
AntiPopGpoDelayInMsS3           = dword: 2000
AntiPopGpoDelayInMsS4           = dword: 2000
EnableDLCDWA                    = hex: 1
PmEnabledWidget				= hex: 0B,0C,0D,0A,11,12,15,0E,0F
CodecAccessAttempts 			= dword: 0x000003E8
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x0421101F
AltCfg = hex: 1F,10,21,04,2E,10,A1,04
[HKR\Settings\Pin\0B]
CfgDflt = dword: 0x40F000F0
[HKR\Settings\Pin\0C]
CfgDflt = dword: 0x90870140
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x90170110
[HKR\Settings\Pin\0E]
CfgDflt = dword: 0x400000F1
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x400000F2
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x40F000F0
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x90A60120
[HKR\Settings\Pin\1F]
CfgDflt = dword: 0x40F000F0
[HKR\Settings\Pin\20]
CfgDflt = dword: 0x40F000F0
[HKR\Settings\GPIO]
[HKR\Settings\Connselector]
[HKR\Settings\filter\rear]
UniqueID                             = hex: 0
LegacyIoctlHere                      = hex: 1
Associations              			= hex: 1,2,4
DigitalVolumeControl                = hex: 0
DisableMicBoost                      = hex: 0
EnableSetFormatSupport              = hex: 1
EnabledPcmRenderBitsAndRates 		= dword: 0xFFFFFFFE
KeepAdcAlwayson                     = hex: 1
EnabledNonPcmBitsAndRates           = dword: 0x20040
ZeroPcmBitsAndRates                 = dword: 0x20040
DisableNonPcmPin                    = hex: 0
EnableVendorPcBeep                  = hex: 0
EnabledPcmCaptureBitsAndRates       = dword: 0x0A0060
MicInRecVolume                      = dword: 0x108000
DisableLine2InFromRender = hex: 1
DisableMicInFromRender = hex: 1
DisableMic2InFromRender = hex: 1
EnableIntSpkrMute			= hex: 1
DisableLineInFromRender = hex: 1
DisableLine2InFromCapture = hex: 1
[HKR\Settings\filter\Rear\TopoNames]
LineIn = "{1020C248-08D0-47eb-8242-FA5EECBFF8A9}"
MicIn  = "{9C56BB03-C758-4e8b-A23A-752D5968EA2D}"
Mic2n  = "{22B47F55-476C-4a44-9811-CFD743125BC2}"
MixIn  = "{88C02F6A-D1E7-4fe3-A506-9E0AE51D1234}"
[HKR\Settings\filter\Rear\plugins]
RegVersion                           = dword: 1
[HKR\settings\filter\rear\plugins\render\SpeakerMgr]
load = dword: 1
idEffect = dword: 32
order = dword: 1175
[HKLM\SOFTWARE\IDT\Config\UI\Layout]
[HKLM\SOFTWARE\IDT\Config\UI\Layout\Panel[0]]
Location="right"
Size="1x1"
[HKLM\SOFTWARE\IDT\Config\UI\Layout\Schema[0]]
Desc="IDS_CONFIG_OPEN"
[HKLM\SOFTWARE\IDT\Config\UI\Layout\Schema[0]\Jack[0]]
Panel=dword:0
Color="black"
Port=dword:0xA
Row=dword:0
Col=dword:0
Dev[0]="hp"
Dev[1]="mic"

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.