**
**
** VIA PCI Card Reader Host Controller
**
** WDM Driver for Windows 2000/XP/Svr2003/Vista x86 edition
**
** v1.41 Jun, 2008
**
**
Introduction:
=============
This document shows you how to setup the driver in Windows operating system.
Contents of the Subdirectory:
=============================
VIACR.SYS The WDM x86 driver for Windows 2000/XP/Svr2003/Vista.
VIACR.INF The installation information file.
VIACR.CAT The WDM x86 driver Windows logo signature file.
CRICON.DLL The customized memory card drive icons dll file.
VIACR.TXT This file.
Installation:
=============
Before starting with the installation process, make sure that the adapter
is properly installed and configured.
1. Turn on the power of your PC to boot into Windows operating system.
Windows will auto-detect your new hardware, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the driver diskette or other location.
2. When the driver installation is completed, restart Windows if needed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.