English.ini Driver File Contents (EPU4_V10033_XPVistaWin7.zip)

ÿþ[Translations]

Auto = Auto

High performance = High Performance

Max power saving = Max Power Saving

Mode Setting = Mode Setting

Mode = Mode

Current Status = Current Status

Tranquility = Tranquility

Performance = Performance

Reliability = Reliability

Convenience = Convenience

Energy Saved = Energy Saved

Current = Current

Total = Total

Total reduced CO2 Emission = Total reduced CO2 Emission

Reduced CO2 Emission = Reduced CO2 Emission

Since = Since

Calibrate = Calibrate

Setting = Setting

OK = OK

Cancel = Cancel

Default = Default

Exit = Exit

vCore Voltage Downgrade = vCore Voltage Downgrade

VDDNB Voltage Downgrade = VDDNB Voltage Downgrade

CPU Loadline = CPU Loadline

Turn Off hard disks = Turn Off hard disks

AI Nap Idle Time = AI Nap Idle Time

Turn Off Screen = Turn Off Screen

Fan Control = Fan Control

Small = Small

Medium = Medium

Heavy = Heavy

Keep BIOS Setting = Keep BIOS Setting

Slow = Slow

Quiet = Quiet

After %1 mins = After %1 mins

After %1 hours = After %1 hours

After 1 min = After 1 min

After 1 hour = After 1 hour

Never = Never

ASUS AI Suite required = ASUS AI Suite required

OFF = OFF

Voltage = Voltage

Yes = Yes

No = No

FirstRunEPU-4 = You are running EPU-4 Engine for the first time.Please close all running programs and calibrate the EPU function.

SetToAutoCalibrate = Before setting to Auto Mode, you need to calibrate the EPU function. Close all running programs before EPU calibration.

BackToDefault = Due to the unstable adjustment, the EPU-4 Engine is automatically restored to its default setting.

ChangeSetting = The system might become unstable after this setting. Are you sure you want to continue?

CalibrateAfterSetting = You need to calibrate again after the CPU voltage or other voltage settings are changed. Please close all running programs and calibrate the EPU function.

InformCalibration = Close all running programs before calibrating the EPU function.

Calibrating, please wait... = Calibrating, please wait...

ConflictAISuite = EPU-4 Engine cannot run simultaneously with AI Suite. Please close AI Suite first before running the EPU-4 Engine.

VGAWindow = No VGA detected. Please install a compatible VGA card or install and enable the ASUS SmartDoctor. For the list of compatible VGA cards, refer to 

Current CPU Power = Current CPU Power

Total CPU Energy Saved = Total CPU Energy Saved

Show tips = Show tips

Auto Mode = Auto Mode

High Performance Mode = High Performance Mode

Max Power Saving Mode = Max Power Saving Mode

Current CPU Energy Saved = Current CPU Energy Saved

Clear = Clear





CanNotRunUnderBiosOc =  EPU cannot launch under the current overclocking settings. Please restart your system, load the EPU default settings in BIOS, and launch EPU again.

CanNotRunUnderApOc =  EPU cannot launch under the current overclocking settings. Please restart your system to clear TurboV/TurboKey overclocking settings and launch EPU again.

CanNotRunUnderTurboV = Please close the TurboV window before launching EPU.



SetToHighPerformanceBeforeExit = You are now exiting EPU, and EPU will automatically switch back to High Performance mode.

AreYouSure = Are you sure you want to exit?

AutoRun = Automatically launch this program on Windows startup.

Clear CO2 Emission = Clear CO2 Emission





; OcMode = EPU-4 Engine cannot run on overclocking mode. Please turn off the overclocking mode from the BIOS setup or use the ASUS overclocking utilities.

Run at system startup = "Run at system startup"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.79