1. EPU6Engine_V10303_WinXPVistaWin7.zip Driver
  2. English.ini File Contents

English.ini Driver File Contents (EPU6Engine_V10303_WinXPVistaWin7.zip)

ÿþ[Translations]



CanNotRunUnderBiosOc = "EPU cannot launch under the current overclocking settings. Please restart your system, load the EPU default settings in BIOS, and launch EPU again."



CanNotRunUnderApOc = "EPU cannot launch under the current overclocking settings. Please restart your system to clear TurboV/TurboKey overclocking settings and launch EPU again." 



CanNotRunUnderOverclockingmode = "EPU-6 Engine cannot run on overclocking mode. Please turn off the overclocking mode from the BIOS setup or use the ASUS overclocking utilities."



CanNotRunUnderAISuite ="EPU-6 Engine cannot run simultaneously with AI Suite. Please close AI Suite first before running the EPU-6 Engine."



CanNotRunUnderTurboV ="Please close the TurboV window before launching EPU."



SubTitle = "the complete system power saving solution"



ModeSetting = "Mode Setting"



CurrentStatus = "Current Status"



Tranquility = "Tranquility"



Performance = "Performance"



Reliability = "Reliability"



Convenience = "Convenience"



EnergySaved = "Energy Saved"



Setting = "Setting"



Calibrate = "Calibrate"



Current = "Current"



Exit = "Exit"



Since = "Since"



TotalCO2Reduced = "Total reduced CO2 Emission"



CO2Reduced = "Reduced CO2 Emission"



HintL0  = "Auto Mode"



HintL1  = "Turbo Mode"



HintL2  = "High Performance Mode"



HintL3  = "Medium Power Saving Mode"



HintL4  = "Max Power Saving Mode"



Clear = "Clear"



GearNameL0 = "Auto"



GearNameL1 = "Turbo"



GearNameL2  = "High performance"



GearNameL3  = "Medium power saving"



GearNameL4  = "Max. power saving" 



Total = "Total"



CurrentCPUPower = "Current CPU Power"



CurrentCPUEnergySaved = "Current CPU Energy Saved"



TotalCPUEnergySaved = "Total CPU Energy Saved"



Cancel = "Cancel"



OK = "OK"



FirstRunEPU-6 = "You are running EPU-6 Engine for the first time"



FirstRunEPU-WS = "You are running EPU-WS Engine for the first time"



CloseUnnecessaryPrograms = "Please close all  running programs and calibrate the EPU function."



CalibrateAfterSetting ="Click Run Calibration again for the settings to take effect."



CalibrationBeforSetting = "Before setting to Auto Mode, you need to calibrate the EPU function."



CloseAllRunningPrograms = "Close all running programs before EPU calibration."



BackToDefault = "Due to the unstable adjustment, the EPU-6 Engine is automatically restored to its default setting."



ChangeSetting = "The system might become unstable after this setting." 



SureContinue = "Are you sure you want to continue?"



SetToHighPerformanceBeforeExit = "You are now exiting EPU, and EPU will automatically switch back to High Performance mode."



SureExit = "Are you sure you want to exit?"



CalibrateAfterSettingChanged ="You need to calibrate again after the CPU voltage or other voltage settings are changed."



TweakItConfirm = "The TweakIt function is disabled when EPU-6 Engine is set to Auto Mode. To enable TweakIt, set EPU-6 Engine to Turbo Mode!"



Yes = "Yes"



No = "No"



InformCalibration = "Close all running programs before calibrating the EPU function."



CalibratingWait ="Calibrating, please wait& "



RunCalibration = "Run Calibration"



Mode = "Mode"



TweakItIsDisabled = "TweakIt is disabled. Set EPU-6 Engine to Turbo Mode before using TweakIt."



CannotLaunchOverclocking = "EPU cannot launch under system overclocking. Please restart your system."



AllowToolTip = "Allow Balloon ToolTip"



RunAtStartup = "Run at system startup"



Default = "Default"



vCoreDown = "vCore Voltage Downgrade"



ChipsetDown = "Chipset Voltage Downgrade"



CPULoadline = "CPU Loadline"



FanControl ="Fan Control"



CPUFrequency = "CPU Frequency"

GPUFrequency = "GPU Frequency"



On = "ON"



Off ="OFF"



OffHD ="Turn Off hard disks"



AINapIdleTime = "AI Nap Idle Time"



OffScreen = "Turn Off Screen"



Small ="Small"



Medium ="Medium"



High ="High"



Light = "Light"



Heavy = "Heavy"



KeepBIOSSetting = "Keep BIOS Setting"



Slow = "Slow"



Quiet = "Quite"



After1min = "After 1 min"



Aftermins = "After %1 mins"



After1hour = "After 1 hour"



Afterhours = "After %1 hours"



Never = "Never"



AISuiteRequired = "ASUS AI Suite required"



VGAWindow = "No VGA detected. Please install a compatible VGA card or install and enable the ASUS SmartDoctor. For the list of compatible VGA cards, refer to" 



AutoModeUnavaliable = "EPU Auto mode will be disabled when you enable the OV_CPU switch."



IXTUWarning = "EPU cannot launch when a third-party utility such as IXTU is enabled. Please restart your system, set the "ASUS/3rd Party UI Priority" BIOS item to [ASUS Utility], and launch EPU again."



NeedReboot = "System needs to reboot for using the application."



GpuBoostNotInstalled = "GPU Boost driver is not installed."
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web3, load: 2.13