BIOS history for Standard ------------------------------------------------------------------------------------------- 1XX For Intel IBEX(PCH)+F71889F+4DIMM+Realtel8111DL PCB 1.1 ERP: 601-7586-010(04S) (full sku) 601-7586-020(05S) (no JMB363,no OC Button,no +/- button,no APS LED) PCB 1.2 ERP: 601-7586-06S (full sku) 601-7586-07S (no JMB363,no OC Button,no +/- button,no APS LED) ------------------------------------------------------------------------------------------ Model : MS-7586 System Chipset : Intel IBEX(PCH) SuperI/O Chip : Fintek 71889F Processor : Havendale and Lynnfied processors in LGA1156 Package ------------------------------------------------------------------------------------------ LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 ------------------------------------------------------------------------------------------ BIOS Version: 1xx 4MB BIOS: AFUD4310.EXE, For user updating BIOS. FPT.EXE, For manufactory production. Flash Tool: !!!The first time flashing BIOS at manufactory, You can use flash tool FPT.EXE (Version 6.0.0.1126); EX: C:\FPT /F A7581IMS.100 You can use flash tool AFUD4310.EXE (Version 4.310). EX: c:\AFUD4310 A7581IMS.100 !!!The end user want to update system BIOS and ME FW to fix some bugs, You can use flash tool AFUD4310.EXE (Version 4.310) EX: C:\AFUD4310 A7581IMS.100 /MEUF ------------------------------------------------------------------------------------------ CPUID uCode PlatformID CPUID uCode PlatformID CPUID uCode PlatformID ----- ----- ---------- ----- ----- ---------- ----- ----- ---------- 0106E0 1F 13 0106E1 0D 13 0106E3 09 13 0106E5 03 13 0106F0 01 13 0106F1 07 13 020650 08 13 020651 12 13 020652 09 12 *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Zebulon Lin Old Version: A7586IMS.153 Build Date: 11/25/2009 New Version: A7586IMS.150 Build Date: 12/16/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Release MP BIOS. 02. Modify memory patch code both work on Clarkdale/Lynnfield. 03. Fix some memory can not adjust DRAM voltage issue. 04. Fix "Currnet DRAM Frequency" is different from "Adjusted DRAM Frequency". 05. Modify PCI resource to get more sysmte memory in WinXP 32. 06. Correct Single/Dual channel information mistake if use Clarddale CPU. 07. Fix memory size just show 4032MB but system insert 4096MB 08. Fix DDR-1066 show mistake to 1333 after clear CMOS. *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Star Kuo Old Version: A7586IMS.152 Build Date: 11/23/2009 New Version: A7586IMS.153 Build Date: 11/25/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Set the "C-STATE" to disable when OC Genie Enable. *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Zebulon Lin Old Version: A7586IMS.151 Build Date: 11/20/2009 New Version: A7586IMS.152 Build Date: 11/23/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Update new Clarkdale(10652) MicroCode. 02. Fixed sometimes generate invalid partition name strings. 03. Add "JFP2 Power LED Function". *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Zebulon Lin Old Version: A7586IMS.140 Build Date: 11/04/2009 New Version: A7586IMS.151 Build Date: 11/20/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Set voltage item to "Auto" when keyin "A" or "a". 02. Remove "C7" from "C State Package Limit Setting". 03. Shaded QPI ratio item for Clarkdale. 04. Support Clarkdale OC Genie. 05. Improve Lynnfield OC memory stability when DRAM frequency greater than 2000Mhz. 06. Fix Clardale CPU turbo ratio can't be adjusted. 07. Update NB-PCIE module. 08. Update CPU module. 09. Fix sometimes Clarkdale S3 Resume fail(hang at CP16). 10. Update M-Flash to v0F. 11. Fix Clardale CPU ratio can't be adjusted. 12. Patch Hynix(HMT125U6AFP8C) 1333/2G memory unstable issue. *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Zebulon Lin Old Version: A7586IMS.147 Build Date: 11/04/2009 New Version: A7586IMS.140 Build Date: 11/04/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Release MP BIOS. *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Zebulon Lin Old Version: A7586IMS.146 Build Date: 10/30/2009 New Version: A7586IMS.147 Build Date: 11/04/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Remove fix Geil-DDR1600(GX32GB1600C7DC) unstable solution. 02. Set the Dram Volt Max value is 1.898v.(Follow Hardware recommand) *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Zebulon Lin Old Version: A7586IMS.145 Build Date: 10/28/2009 New Version: A7586IMS.146 Build Date: 10/30/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Support Low voltage XMP DRAM. 02. Fix Geil-DDR1600(GX32GB1600C7DC) unstable issue. 03. Patch M-Flash boot function fail if user use (1)Rx2600(2)RX2400 VGA. *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Zebulon Lin Old Version: A7586IMS.144 Build Date: 10/23/2009 New Version: A7586IMS.145 Build Date: 10/28/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Follow hardware recommand to decrease OC Genie clk form 20MHz to 26MHz! 02. Follow hardware recommand to decrease CPU Vocre max setting from 0.371v to 0.303v! *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.143 Build Date: 10/20/2009 New Version: A7586IMS.144 Build Date: 10/23/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 1.00 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Update NB moduel (_30) and CLK/HVD RC code v1.00 02. Shaded DRAM ratio when Extreme Memory Profile Mode select auto. Open DRAM ratio when Extreme Memory Profile Mode select advance. 03. Update Ignition Firmware v 6.0.0.1185 FSCC table, Flash bios add "/meuf" to update ME FW 04. Update MFlash v0D -Correct FAT12 update&save function. -Correct FAT32 update&save function. -Fix the issue BIOS hang when search file on FAT32(Recovery). -Modified searching file rule when BIOS recovery. 05. Fix system will hang at "Check NVRAM" if memory ratio=6 & CasLatency=8. *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.142 Build Date: 10/12/2009 New Version: A7586IMS.143 Build Date: 10/20/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 0.9 Ignition Firmware tool Revision:6.0.0.1185 Description for FAE: 01. Fix S3 resume fail when OC Genie enabled 02. Update Microcode for Clarkdale CPU c-2 Step(020652\08) 03. Correct Password Check help item 04. Update Ignition Firmware v 6.0.0.1185, Flash bios can add "/meuf" parameter to update ME FW *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.141 Build Date: 10/07/2009 New Version: A7586IMS.142 Build Date: 10/12/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 0.9 Ignition Firmware tool Revision:6.0.0.1126 Description for FAE: 01. Fix XMP-2200 DRAM unstable when XMP enable. 02. Modified XMP speed item behavior. 03. Support DDR3-1600 OC Genie function. 04. Update setup option to spec 3.01(2009-10-07 release). -Add item, C State Package Limit Setting -Add item, Intel VT-d Tech *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Zebulon Lin Old Version: A7586IMS.134 Build Date: 09/24/2009 New Version: A7586IMS.141 Build Date: 10/07/2009 LFD RC Revision : 1.10 CLK/HVD RC Revision : 0.9 Ignition Firmware tool Revision:6.0.0.1126 Description for FAE: 01. Patch S3 fail when use Clarkkale CPU. 02. Fix OC Genie fail when clear cmos first boot enable OC Genie at NO OC Genie button platform. 03. Fixed USB device can not wake up from S3 when "Resume by PCI device (#PME)" item set to "Disable". 04. Update NB module and RC code v090. 05. Improve memory frequency when OC Genie enabled. 06. Use XMP recommand timing when OC genie enable. 07. Fix system can not resume from S3 after OC Genie enabled and system never Power Off. 08. Fixed sometimes hang debug code C5 when OC Genie enabled. 09. Patch Transcend(TS256MLK64V3U) 1333/2G memory issue. =================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.134 Build Date: 09/24/2009 New Version: A7586IMS.130 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Ignition Firmware tool Revision:6.0.0.1126 Description for FAE: 01. Release bios *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.133 Build Date: 09/24/2009 New Version: A7586IMS.134 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Ignition Firmware tool Revision:6.0.0.1126 Description for FAE: 01. Modify OC Genie post1 message (Enable to Enabled) Modify Cell menu text PCH 1.8(V) to CPU PLL Voltage(V) 02. Remove unnecessary code about S3 resume fail 03. Add a file about use SDUP update UUID issue 04. Fix case open function keyboard cannot use after add pcie clock adjust code 05. Modify iCafe table item 06. Patch OC Genie fail clear cmos may still cannot boot *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.132 Build Date: 09/15/2009 New Version: A7586IMS.133 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Add new ucode for Clarkdale CPU c-2 Step(020652\03) 02. Fixed UKey function fail when plugged many USB devices. 03. Support changed BBS boot order used AMIBCP tool 04. Protect register in Project SMBUS routine 05. Check difference before save safe CMOS to GPNV 06. Fix adjust PCIE clock cause cold boot fail. 07. Fix S3 resume fail when memory frequency over 1500Mhz. 08. Update OC Genie LOGO. 09. Set CPU APS function disabled when system manual OC or OV(CPU Voltage) 10. Change Token seting.If POST1 show "Not enough space in Runtime area!!. SMBIOS data will not be available. Press F1 to Resume."message when update code. 11. Fix system will hang up if use SDUP to update UUID. 12. Modify code let system information and SingOnMessage are synchronous. 13. Intel Turbo Boost power on value set to Enabled *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.131 Build Date: 09/04/2009 New Version: A7586IMS.132 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Patch SanMax 1333/2G memory issue. *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.120 Build Date: 09/03/2009 New Version: A7586IMS.131 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Change C-state default to Enable. *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.121 Build Date: 09/03/2009 New Version: A7586IMS.120 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Release bios *=================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.110 Build Date: 09/03/2009 New Version: A7586IMS.121 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Fixed When the system enter S4 mode then wake up, after that enter S3 mode, that will cause USB device can't wake up the system at S3 mode. 02. Fiexd WHQL test fail when system plug 8GB memory. 03. Update Clarkdale uCode (020651\12) 04. Modify turbo ratio always fix. 05. Post1 CPU Freq error when clear cmos 06. Modify Vtt voltage setting as HW modify design (work on PCB1.2 only) ==================================================================================* |-----------------------------------------------------------------------| |NOTE: | |M-Flash Boot function may halt at 0x60 | |(1)The issue just happened within bios v.100 <-> 110 (from beta v.112) | |(2)If user use 110 to boot 110 and later BIOS is no problem. | |(3)The issue just happen at the first time after choose boot function, | | after reset or power off the issue will disappear. | |-----------------------------------------------------------------------| ==================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.115 Build Date: 08/28/2009 New Version: A7586IMS.110 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Release bios ==================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.114 Build Date: 08/28/2009 New Version: A7586IMS.115 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Modify USB port init value by HW recommend ==================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.113 Build Date: 08/21/2009 New Version: A7586IMS.114 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Patch OCZ and some OC memory issue. 02. Disable FDD but enable USB drive which is emulated to FDD. 03. Mflash issue: -Fix sometimes two file entry exist after backup. -Fix some USB key reserved more than 0ffh sectors. 04. Add iCafe Table item (Intel EIST, OC Genie Button Operation, Base Clock Button) 05. Fix IDE/SATA7,8 info in Standard CMOS Features sometimes may shows abnormal 06. Modify some setup option access level. 07. Update AMI EIP follow Intel recommend. 08. Not programming SIO-GPIO6(USB_Mode) when into S4,S5 09. Modify USB port init value ==================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.112 Build Date: 08/13/2009 New Version: A7586IMS.113 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Modify USB init valut by Intel EDS. Update SB module 8.00.15_SB-PCH_028. ==================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.111 Build Date: 08/12/2009 New Version: A7586IMS.112 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Modify code to warning CMOS location be changed 02. Update M-Flash code for P55(v00B). -Add hook for chipset to disable ATI VGA patch -fix update fail if BIOS file use USB last sector 03. Update UKEY code for P55(v003). -Fix the issue getting USB name error when RMH_SUPPORT = ON -Correct setup strings according to test spec 04. Reopen item, CPU Phase Control" in Green Power for ERP -020,07S by PM request 05. Update module, SB _027, NB _023 06. Modify performance lower when memory OC 2000Mhz. 07. Modify XMP ratio set rule by memory max. ratio support. 08. Modify WHQL Audio issue solution by Intel BSU ==================================================================================* Model: MS-7586 PCB: 1.1/1.2 Author: Tina Hsieh Old Version: A7586IMS.100 Build Date: 08/04/2009 New Version: A7586IMS.111 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Move OC Genie's OC profile patch code from Save And Exit to Save OC Profile. 02. Avoid USB initial time too long cause OC Genie reset. 03. Clear DFS done flag when cmos bad. 04. Modfiy NB device's SID/SVID. 05. Fix WHQL Audio issue 06. Update Clarkdale uCode (020651\0F) 07. Modify for PCB1.2 ERP 06s/07s ==================================================================================* Model: MS-7586 PCB: 1.1 Author: Tina Hsieh Old Version: A7586IMS.10U Build Date: 07/28/2009 New Version: A7586IMS.100 LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Release MP bios *=================================================================================* Model: MS-7586 PCB: 1.1 Author: Tina Hsieh Old Version: A7586IMS.10T Build Date: 07/28/2009 New Version: A7586IMS.10U LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. modify ClockGen Tuner and cpu Voltage help string 02. Fix system can not enter BIOS if set suprevisor password to ROM and then flash BIOS. 03. Check if previous settings need to be updated. 04. Fix DMI type-1 informatin will be wrong if use standard version build customer version. 05. Modify CPU Vcore when OC Genie enable 06. Modify some Iginition FW parameters, so flash bios please add /MEUF 07. Add "CPU Vcore" under "CPU Voltage" 08. Fix USB Boot question location for CMOS layout change. *=================================================================================* Model: MS-7586 PCB: 1.1 Author: Tina Hsieh Old Version: A7586IMS.10S Build Date: 07/23/2009 New Version: A7586IMS.10T LFD RC Revision : 1.10 HVD RC Revision : 0.72 Description for FAE: 01. Change Logo and Market name for ERP -05S -04S:P55-CD53 (MS-7586) -05S:P55-SD50 (MS-7586) 02. Fix INT 15 test fail at PE side. 03. Patch 750 CPU cache L2 size display error. 04. Patch detecting memory SPD coding bug for compatibility issue. 05. Update module, ACPI NB(_06)/SMBIOS NB(_002)/NB(_022) with HVD RC code v072. 06. Fix base clock can not adjust issue even-if update BIOS or clear CMOS. 07. Fix system can not overclock if dimm4 insert DDR module. **The mistatke will cause system can not get correct DDR info.** 08. Update BBVideo code for Lynnfield/Clarkdale. 09. Adjust JMB 363 SATA7/8 init value follow HW recommend. 10. Fixed Windows7 WHQL test 11. Modify USB init value by Intel EDS *=================================================================================* Model: MS-7586 PCB: 1.1 Author: Tina Hsieh Old Version: A7586IMS.10R Build Date: 07/21/2009 New Version: A7586IMS.10S LFD RC Revision : 1.10 HVD RC Revision : 0.70 Description for FAE: 01. ReModify PCI slot no. to match MB 02. Hidden item,OC Genie Button Operation for ERP 05s. 03. Merge SIO/Up6262 patch DRAM voltage code. 04. Correct coding mistake. Some patch memory voltage can not work. 05. "Build Date" in "Overclocking Profile" string mistake. 06. Update module, SB(_025)/NB(_021)/PCIE_NB(_006) 07. Update LFD RC code v110 08. Modify Lynnfield RC must init all at warm boot when system OC. *=================================================================================* Model: MS-7586 PCB: 1.1 Author: Tina Hsieh Old Version: A7586IMS.10Q Build Date: 07/16/2009 New Version: A7586IMS.10R LFD RC Revision : 1.00 HVD RC Revision : 0.70 Description for FAE: 01. Update CPU module, INTEL-Op/SWSCI, ACPI: South Bridge - PCH. 02. Add delay time to patch system sometimes hang BCh when flash BIOS then reboot frist time. 03. Correct string mistake. (1)"Memory-Z" help string is too long. (2)Correct word spell mistake.(recommanded -> recommended) (3)PCH 1.05(V) (4)CPU VTT(V) (5)PCH 1.8(V) 04. Fixed S4 fail when use 2.93GHz & 2.8GHz and Hyper threading function enable. 05. Fix sometimes OC Genie enable add 12MHz. 06. Avoid OC fail function cause OC Genie run 133Mhz. 07. Patch DRAM Adv Timing item control coding bug. 08. Correct coding mistake. **The mistake will cause XMP voltage error if you don't have SIO voltage function.** 09. Fix OC Genie can't disable after save OC profile. 10. BBS scan resources map to find IPL from first to last (Token,RESMAP_REVERSE_SCAN_ORDER=0) 11. Increase OC Genie down clock step to 20Mhz (from 12Mhz) 12. Disable APS function when OC Genie enable. 13. Modify voltage range and warning color. 14. Update M-Flsah code to v007. 15. Modify sign message to meet MSI BIOS spec. **mm/dd/yy change to yy/mm/dd** 16. Update Project Rom Hole-2 17. M-Flash: Remove Floppy A in list 18. Update SIO Voltage module part 19. Hidden CPU VTT(V) item by HW/PM request *=================================================================================* Model: MS-7586 PCB: 1.1 Author: Tina Hsieh Old Version: A7586IMS.10P Build Date: 07/10/2009 New Version: A7586IMS.10Q LFD RC Revision : 1.00 HVD RC Revision : 0.70 Description for FAE: 01. Add item, Auto Disable PCI Frequency 02. Patch some memory compatibility issue for Lynnfield. - Geil series - OCZ series - Buffalo-1066Mhz-1GB D3/1066-1G - Elpida-1066Mhz-1GB EBJ11UD8BAFA 03. Change X-Ratio concept. - Remove X-Ratio item. - Integrate X-Ratio function to the Adjust CPU Ratio item, and control by EIST item as Auto option. - Add Active Processor item. 04. Modify DRAM Timing item range for Clarkdale. 05. Fix DDR frequency run 1066 when OC Genie be disabled. 06. Fixed check Q_SUPERVISOR_SAVE_PLACE before saving PW to rom hole. 07. Fixed M-Flash Update BIOS/Boot Function fail wheh RMH_SUPPORT enable. 08. Fix COMA/COMB/LPT port do not disable clearly. 09. Add "Clear BIOS Setting" option. 10. Shade question "Clear BIOS Setting x" when data absent. 11. Fiexd OSSpeed code bug. 12. Remove unuse Device ROM file and add Lan device. 13. Correct "REP" coding mistake. 14. Fix in PCH Raid mode system may halt at 0x78 when restart 15. Shaded Turbo Boost item when OC Genie enabled. 16. Modify OC Genie bios item name to OC Genie Button Operation Modify OC Genie bios post message. 17. Clear OC Genie successful flag when OC Genie disable. 18. Move Green power APS code after switch SuperIO GPIO25 by HW recommend (about fixing turbo ratio function) 19. Config SIO 2Dh about RSMRST# for HW request. 20. Adjust some function for ERP 05s. 21. Modify "C-State" option to meet MSI spec. 22. Fixed Hyper-Threading Funtion detect fail 23. Modify setup menu -string, CPU VTT Voltage(V) -string, PCH 1.8V(V) -string, No Media -item hidden, PCIE Spread Spectrum 24. Set BSEL_EN Bit to "0" (as GPIOs) by HW request *=================================================================================* Model: MS-7586 PCB: 1.1 Author: Tina Hsieh Old Version: A7586IMS.10O Build Date: 07/02/2009 New Version: A7586IMS.10P LFD RC Revision : 1.00 HVD RC Revision : 0.70 Iginition FW : 6.0.0.1126 Description for FAE: 01. Update Microcode, 0106E5\03\13 (remove 0106E5\07\13) 02. Enable SLIC to support SLP20. 03. Fixed S3/S4 system auto wake up when plug USB device. *** RMH_SPPORT set "1" side effect *** 04. Fix cannot disable usb 05. Modify detect memory error beep. 06. Add access level for Password,M-Flash,Profile 07. Add OC fail function. 08. Add "Overspeed Protection" item. 09. Modify Floopy auto function 10. Update M-Flash_006 11. Modify string -PCI-E Freq. help string (Min:90Mhz,MAX:190Mhz) -Adjust CPU Base Frequency (MHz) help string -PCH_1.8V(V) help string -DDR_VREF_CA_A(V) help string -DDR_VREF_CA_B(V) help string -DDR_VREF_DA_A(V) help string -DDR_VREF_DA_B(V) help string 12. Change Realtek HD Audio table. 13. Modify SATA register value follow EDS. 14. Modify PCI slot routing name to match HW design 15. Change PCH Raid rom to ver 8.9.0.1023 16. Fix Base clock can't be change when software reset 17. Update NB module 8.00.15_NB-HvdLfd_016 o 8.00.15_NB-HvdLfd_019 and RC code (Lynnfield RC 100 and Havendale RC 070). 18. Add GPIO function of SuperIO to switch fixing turbo ratio. 19. Modify DRAM Timing items fail to restore from Overclocking Profiles. 20. Add full reset function for DRAM Timing Mode Item. 21. Patch Intel Turbo Boost be not hidden when Intel EIST disable. 22. Patch OC Stepping fail when onboard +/- key adding. 23. Add system full reset when CPU OC and memory auto decrease ratio. 24. Let OC Genie do again if OC Genie button pressed and load bios default. 25. Fix disabled OC Genie EIST and Turbo Boost item default value incorrect. 26. Fix some items be shaded when cmos checksum bad and OC Genie button enabled 27. Fix FAN setting do not restore after s3 resume. 28. Auto build SLP 2.0 ACPI table. 29. Add OSSpeed message in POST1. *=================================================================================* Model: MS-7586 PCB: 1.1 Author: Tina Hsieh Old Version: A7586IMS.10N Build Date: 06/29/2009 New Version: A7586IMS.10O LFD RC Revision : 0.90 HVD RC Revision : 0.63 Description for FAE: 1. Open item, C1E Support, in Cell Menu and CPU Feature group 2. Separate CPU Phse Control and Motherboard LED Control item and modify option 3. Fix CPU Temp. and System Temp. shows wrong 4. Modify boot device number in boot sequence. 5. Add auto detecting different CPU default ratio to keep function when Adjust CPU Ratio item was set default value. 6. Add turbo ratio can be used when EIST disable and Turbo Mode enable. 7. Modify QPI and Memory ratio range for auto detect. 8. Add full reset item as Adjust CPU Ratio. 9. Add CPU Max Ratio Item. 10. Modify voltage auto setting value by Lynnfiled OC status (base 7581 PCB 1.0) 11. Add memory and QPI ratio auto decreasing ratio when over-clock CPU Base Frequency for Lynnfield. 12. Fixed XMP memory frequency show error in POST1. 13. Fix OC genie fail use patch code 20090619 14. Fix OC profile can't save when OC genie enable. 15. No show OC genie logo when full logo disable 16. Fixed M-Flash show all BIOS BIN file. 17. Fixed CPU ratio can not save to overclocking profile. 18. Add onboard +/- key adjust base frequency function. 19. Not display FloppyB information on Post2 20. Fix JMB363 Raid mode 21. P55-CD53.jpg for full LOGO 22. Set TURBO_MODE=1 to support turbo function 23. Update SB module, ACPI SB module pard, Intel VT-d CSP module part. 24. Add Icafe Table. 25. Modify BSU Rev:0.72 Section:17.1.6 in BootBlock to patch device lose issue. 26. Modify SATA register value follow HW recommend. 27. If OC-Genie enabled, system will shadow "Q_VREF_VDRAM" & "Q_VREF_VTT". 28. Fine Tune the Voltage value. 29. If OC-Genie enabled system do not modify SIO Volgate by option. 30. Fix the bit do not clear and set. It will cause sometime the bit always set in some special case. **Ex: OC-Genie enabled and then disabled.** 31. Update Setup SRC to "MSI_SetupSRC_08". 32. Add "Base Clock Button" item. 33. (1)Change "pro_read_smbus_block_far" to "OC_read_smbus_block_far". (2)Change "pro_read_smbus_block_jmp_di" to "read_smbus_block_jmp_di". 34. Romeve MS-7586 special Auto Volt Change method and follow orginal ProOC method. 35. Fix Base clock be set to 133 when S3 restore. 36. Modify CPU vcore adjust follow MS-7586 spec in SMI TCO module. 37. Modify Up6262 function. (1)Support Key-In function. (2)Shadow CPU Vcore voltage if OC-Genie enabled. (3)Modify DRAM Base Volt get method. (4)Modify CPU Voltage display style to meet hardware spec. 38. Display bottom infromation. 39. Remove unnecessary information in HDD size item. 40. Update the latest project moduel. 41. After OC Genie successful force enter bios menu modify to delay 5 second continue boot. *=================================================================================* Model: MS-7586 PCB: 1.1 Author: Tina Hsieh Old Version: A7586IMS.10M Build Date: 06/23/2009 New Version: A7586IMS.10N LFD RC Revision : 0.90 HVD RC Revision : 0.63 Description for FAE: 1. Green Power modify for PCB1.1 2. Disable Auto_det_en to patch sometimes PS2 KB/MS loss. 3. Set USB to RMH mode. 4. Modify Voltage control for PCB1.1(Exchange 0x66 port1 & 3, 0x68 port1 & 3) 5. Add disable root port0 code. 6. Remove (SMART mode/DMA mode/LBA Mode) for CMOS save 7. Modify item,Resume From S3 By PS/2 Mouse option 8. Fix after use LAN/PCIE-LAN wakup S1,system can't shut down from OS issue. 9. Add show Serial Number in System information but defaule is hidden. *=================================================================================* Model: MS-7586 PCB: 1.0 Author: Tina Hsieh Old Version: A7586IMS.10L Build Date: 06/19/2009 New Version: A7586IMS.10M LFD RC Revision : 0.90 HVD RC Revision : 0.63 Description for FAE: 1. Implement U-Key funtion. **MSI_UKey_001** **Support save password to ROMHole** 2. Update JMB363 module 3. Add "+""-" key function for test 4. Fix after load default DDR voltage 1.7v (remove v.10J item4) *=================================================================================* Model: MS-7586 PCB: 1.0 Author: Melody Li Old Version: A7586IMS.10K Build Date: 06/16/2009 New Version: A7586IMS.10L LFD RC Revision : 0.90 HVD RC Revision : 0.63 Description for FAE: 1. Update SB module 8.00.15_SB-PCH_019 to 8.00.15_SB-PCH_020 Update Intel_VTd module 8.00.14_IntelVT-d_2.00.01 to 8.00.14_IntelVT-d_2.00.02 Update SMIFLASH to MSI_SMIFLASH_05 Update MSI On Flash Block Description to MSI_OFBD_03 Update NB module 8.00.15_NB-HvdLfd_014 to 8.00.15_NB-HvdLfd_016 & RC code. Update Project ROM Hole - 2 to PROHOLE_2_003 M-Flash module to MSI_MFLASH_004 2. Update Project - 2 3. Modify Rev:0.72 Section:17.1.6 to patch device lose issue. 4. Update SIO Voltage eModule. 5. Modify some item strings follow Spec3.0 6. Modify Model name in DMI information. 7. Add Auto OC controller item in BIOS menu. 8. Add OC Stepping item. ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 1.0 Author: Melody Li Old Version: A7586IMS.10J Build Date: 06/11/2009 New Version: A7586IMS.10K LFD RC Revision : 0.90 HVD RC Revision : 0.62 Description for FAE: 1. Modify some item follow spec3.0 a. IDE Primary Slave b. SATA information in post1,post2 when sata mode set to RAID/AHCI. C. Can't detect device if Floppy A set to Auto. d. Disable IEEE1394 Controller. e. UDMA mode set error for sata device. 2. Modify Turbo Button used GPIO for PCB1.1 ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 1.0 Author: Melody Li Old Version: A7586IMS.10I Build Date: 06/10/2009 New Version: A7586IMS.10J LFD RC Revision : 0.90 HVD RC Revision : 0.62 Description for FAE: 1. Update Code Base : 1AEIP006 -> 1AEIP007 (CPU module,SMBUS module) 2. Update SB,PCI_EXPRESS,USB,SMBIOS,SMI module. 3. Modify add cpu ucode method. 4. Add auto change voltage for OC.(CPU/VTT/DRAM). 5. Modify model name, Manufacturer,Version in DMI information. 6. Modify Memory size some times show error in post1. ------------------------------------------------------------------------------------------- Model: MS-7586 PCB: 1.0 Author: Melody Li Old Version: A7586IMS.10H Build Date: 05/27/2009 New Version: A7586IMS.10I LFD RC Revision : 0.90 HVD RC Revision : 0.62 Description for FAE: 1. Fixed there is no audio device, and removed HDMI HD audio. 2. Modify the auto voltage value for DFS button is enabled. 3. Update Lynnfield RC code v0.9 and Havendale RC code v0.62, update NB module. 4. Add Intel turbo boost item. 5. Remove Rev:0.72 Section:17.1.6 to patch device lose issue. 6. Update ME Ignition FW update module. ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 1.0 Author: Melody Li Old Version: A7586IMS.10G Build Date: 05/26/2009 New Version: A7586IMS.10H LFD RC Revision : 0.75 HVD RC Revision : 0.61 Description for FAE: 1. Adjust Watch dog function. 2. Fixed install OS fail with some memory and HDD. 3. Removed Internal HD codec. 4. Modify USB config for HW test. 5. Add ClockGen Tuner item. 6. Modify some Voltage help strings in cell menu. 7. Add CPU uCode for Lynnfield processor B-1 sample. ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 1.0 Author: Melody Li Old Version: A7586IMS.10F Build Date: 05/21/2009 New Version: A7586IMS.10G LFD RC Revision : 0.75 HVD RC Revision : 0.61 Description for FAE: 1. Removed some unused code in clkgen module. 2. Removed the Clkgen watch dog about memory OC. 3. Fixed code error. ----------------------------------------------------------------------------------- Model: MS-7586 PCB: 1.0 Author: Melody Li Old Version: A7586IMS.10E Build Date: 05/20/2009 New Version: A7586IMS.10F LFD RC Revision : 0.75 HVD RC Revision : 0.61 Description for FAE: 1. Add Green function -Green Power group in Main menu 2. Update ucore:M1320651_01 3. Update Flash model 4. Move the disable watch dog function before post kernel aviod system will restart when have dual channel DRAM. 5. Modify some items follow Spec3.0 a.Floppy A B.System Information->CPU Frequency c.BIOS Set Password 6. Update SB module. ------------------------------------------------------------------------------------- Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.10D Build Date: 05/18/2009 New Version: A7586IMS.10E Description for FAE: 1. Update code base to 1AEIP006(NB,SB,SB_ACPI) 2. Fixed system will halt when update UUID (use tools:AMIDMI/DMI20_44). 3. Fixed 1T/2T memory timing coding bug. 4. Fixed over 1000GB HDD show error in POST2. 5. Add M-Flash funtion. 6. Adjust some setup menu for BIOS Spec 3.0 7. Remove unused question(SMART mode/DMA mode) to save CMOS space. 8. Add AutoOC Function. 9. Config SIO 2Dh about RSMRST# for HW request. ------------------------------------------------------------------------------------- Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.10C Build Date: 05/07/2009 New Version: A7586IMS.10D Description for FAE: 1. Add long beep function for system no install any memory. 2. Modify SATA PLL signal set to fix and PCI-E clock offset one step to get correct frequency. 3. Update ucode for LFD ES2'(B0) samples CPU. 4. Disable Clkgen watch dog. ---------------------------------------------------------------------------------------- Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.10B Build Date: 04/24/2009 New Version: A7586IMS.10C Description for FAE: 1. Update core base to 1AEIP005 2. Modify string -Intel EIST -Adjust CPU Ratio 3. Set UVSCC value follow Intel recommend. 4. Enable ME_support to support AMI Flash tool 5. Update CPU ucode(106E1_0D)&(106F1_07) & (20650_06). 6. Fix hang C6 some times when power on. ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.10A Build Date: 04/20/2009 New Version: A7586IMS.10B Description for FAE: 1. Add SIO voltage control function for some voltage(DRAM,PCH_1.05,CPU_VTT). 2. Modify UPI6262 Voltage control function for some voltage(CPU Vcore,PCH_1.8,CA_A/B,DQ_A/B) 3. Update ucode for:0106E1_0B 4. Changed the setup Source to "MSI Setup Source" 5. Add CPU-Z V0.06 6. Modify Primary Graphic's Adapter 7. Modify Restore On AC Power Loss 8. Removed emodule:User Settings 9. Add some cell menu item for OC function control 10. Removed the configuration for SB GPIO_47 for VGA issue. 11. Add patch for read smbus transmission error. ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.109 Build Date: 04/08/2009 New Version: A7586IMS.10A Description for FAE: 1. Update NB eModule,SB eModule,SB_ACPI,SB_SMI module part. 2. Adjust memory size information incorrect in post and BIOS. 3. Disable NAND controller/IDER/KT/HECI device. 4. Update MEMORY-Z V0.0A . 5. Add Beep warning Function when VGA Card don't exist. 6. Removed UP6264 controller . ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.108 Build Date: 04/02/2009 New Version: A7586IMS.109 Description for FAE: 1.Change flash part to 2M: SPI 64K BOOTBLOCK FLASH. 2.Update Memory-Z to 009. 3.Update CPU module to Nehalem;8.00.15_CPU-i7_01.03. ------------------------------------------------------------------------------------- Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.107 Build Date: 03/24/2008 New Version: A7586IMS.108 Description for FAE: 1.Update core base:1AEIP004 Update NB eModule:8.00.15_NB-HvdLfd_007 Update NB_ACPI module part:8.00.13_ACPI310RC2-nbHvdLfd_04 Update NB_PCIE module part:8.00.13_PCIE_03-nbHvdLfd_004 Update SB eModule:8.00.15_SB-PCH_010 2.Update OEMBOARD to MSI_BOARD_PROJECT_V212(090316) 3.Update Project ROM Hole-2 ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.106 Build Date: 03/18/2008 New Version: A7586IMS.107 Description for FAE: 1. Fix the system keep restarting when disable ACPI function and without TPM card. 2. Remap SATA Device sequence. 3. Fix Slot information in post2 is incorrect. 4. Fix System temperature show error. 5. Fix USB device can't wake up system from S3. 6. Update SB eModule and ACPI module part. Update SB eModule to :8.00.15_SB-PCH_009 ACPI module part:8.00.13_ACPI3010_RC2-sbPCH_004 ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.105 Build Date: 03/12/2008 New Version: A7586IMS.106 Description for FAE: 1. Update core base to (1AEIP003) 2. Build BIOS for ES2 CPU. 3. Disable keep MAC/GUID function in BIOS rome hole for Realteck LAN and VIA 1394. 4. Patch can not disable on chip SATA controller. ------------------------------------------------------------------------------------- Model: MS-7586 PCB: 0.B Author: Melody Li Old Version: A7586IMS.104 Build Date: 02/27/2008 New Version: A7586IMS.105 Description for FAE: 1.Update core base to (1AEIP002) NB module,SB module,PCIE module part,ACPI module part,AHCI module part, SMBIOS module part,POPUP module,SMI module part. 2.Update CPU Module. 3.Add CPU Micro code. 4.Add the patch for sata port UDMA mode incorrect. 5.Add Memory_Z (008)emodule. 6.Post1 show total memory. 7.Modify memory information in post1(DRAM Frequency for DDR3 x (x Channel)). 8.Add patch for CDROM UDMA incorrect for Oembaord 2.0. 9.Build for PCB 0B. Config GPIO18,20,25,26,44,45,46,47 Update Audio table for ALC889. ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 0.A Author: Melody Li Old Version: A7586IMS.103 Build Date: 01/16/2008 New Version: A7586IMS.104 Description for FAE: 1. Update code base(1AEIP001). CPU module,NB module,SB module,MPS module,RT32 module,SMBIOS module Setup Source modele,TCPA module,USB2 module part,ACPI Module part 2. Update ucode. 3. Update F71889F SIO Module to MSI_SIO_F71889F_01. 4. Update MSI Project Module to MSI_BOARD_PROJECT_V210 . 5. Modify Floppy Drive A default to "Not Installed" 6. Add AHCI code. 7. Update Realtek HD Audio table. 8. Fix USB wake up code error. 9. Moved Power LED code to project.asm. 10.Fix installing VISTA very slow when "Floppy A" is set to "1.44M" but has no floppy connect. ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 0.A Author: Melody Li Old Version: A7586IMS.102 Build Date: 12/04/2008 New Version: A7586IMS.103 Description for FAE: 1. Add "Power LED" in bios setup. 2. Change the full logo, and set "Full Screen Logo Display" default to "Enable" 3. Modify SATA display sequence in setup. 4. Modify wake up items, make sure these function are OK(except S3). ----------------------------------------------------------------------------------- Model: MS-7586 PCB: 0.A Author: Melody Li Old Version: A7586IMS.101 Build Date: 12/01/2008 New Version: A7586IMS.102 Description for FAE: 1. Fixed system hang when press power button. 2. Removed the popup message in post screen. 3. Modify SATA information in POST and BIOS. 4. Prepare for Chassis Open Function. 5. Fixed can't disbale JMB363 Controller. 6. Modify Wake Up Items: -Add PS/2 KB and Mouse wake up items. -Removed "Wake Up from Onboard LAN" Item. -Modify RTC Wake up Item's defaults. 7. Add some Items in "H/W Monitor" -Add SYS FAN 1 Control -Add SYS FAN 2 Control -Add SYS FAN 2 Speed 8. Set BBS boot device to 12 and USB max mass device to 12. 9. Add TPM function. 10.Fixed "BIOS Flash Protection" can't active. 11.Add and modify some Items: -Add "L3 Cache Size" -Modify "HPET" -Removed "Re-call VGA BIOS From S3" 12.Prepare for UP6262/UP6264 voltage adjust function. ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 0.A Author: Melody Li Old Version: A7586IMS.003 Build Date: 11/26/2008 New Version: A7586IMS.101 Description for FAE: 1. Modify IDE/SATA post and setup remap follow spec. 2. Add and modify some items follow spec. -Add Hold On Item -Add BIOS Flash Protection Item -Modify USB Controller Item -Add Onboard LAN Controller Item -Add Onboard IEEE1394 Controller Item -Add IO Devices -Open H/W monitor items 3. Add some modules -Add NETWORK BOOT 4. Modify kernel for "CPU Specifications" & "MEMORY-Z" hotkey. 5. Add Realtek HD Audio table. ------------------------------------------------------------------------------------- Model: MS-7586 PCB: 0.A Author: Melody Li Old Version: A7586IMS.002 Build Date: 11/25/2008 New Version: A7586IMS.003 Description for FAE: 1. Update SB module and ACPI: South Bridge - PCH module part. 2. Add and modify "CPU Specifications" function. 3. Add and modify "MEMORY-Z" function. 4. Fixed random hang at shut down screen. 5. Fixed PCI-E device can't found device. 6. Add some modules. --------------------------------------------------------------------------------------- Model: MS-7586 PCB: 0.A Author: Melody Li Old Version: A7586IMS.001 Build Date: 11/19/2008 New Version: A7586IMS.002 Description for FAE: 1. Update some module parts: Intel - NB: Lynnfield Intel - SB: PCH ACPI: North Bridge - Lynnfield ACPI: South Bridge - PCH PCI_EXPRESS - NB: Lynnfield PCI_EXPRESS - SB: PCH SMI - NB: Lynnfield SMI - SB: PCH USB2: South Bridge - PCH 2. Add Module:Resume GPNV Handle 3. Add module part: Project ROM Hole ------------------------------------------------------------------------------------ Model: MS-7586 PCB: 0.A Author: Melody Li Old Version: 1AEIP000.ROM Build Date: 11/13/2008 New Version: A7586IMS.001 Description for FAE: 1. Bulid the first BIOS.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.