ÿþ; Copyright 2001
; Microsoft Corporation
; USB 2.0 Add-On Driver support
; For Windows XP
;
[Version]
signature="$Windows NT$"
Class=USB
ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
Provider=%Msft%
DriverVer=02/01/2002,5.1.2600.0
CatalogFile=USB2X.CAT
[SourceDisksNames]
1=%Distribution%,usbehci.sys,,
[SourceDisksFiles]
usbehci.sys = 1
hccoin.dll = 1
[ControlFlags]
ExcludeFromSelect = *
[DestinationDirs]
DefaultDestDir=11 ; LDID_SYS
EHCIXP.CopyFiles.NT = 10, system32\drivers
USBHCCOIN.CpoyFiles.NT = 11
; =================== Table of content =========================
; note that these are in alphabetical order
;
[Manufacturer]
%NEC.MFG% = NEC.Section, NTx86.5.1
%INTEL.MFG% = INTEL.Section, NTx86.5.1
; --------------------------------------------------------------
; EHCI - For Windows XP...
; --------------------------------------------------------------
[EHCIXP]
AddReg=EHCIXP.AddReg
CopyFiles=EHCIXP.CopyFiles.NT
DelFiles=EHCIXP.DelFiles.NT
[EHCIXP.Services]
AddService = usbehci, 0x00000002, EHCIXP.AddService
[EHCIXP.AddReg]
HKR,,EnumPropPages32,,"usbui.dll,USBControllerPropPageProvider"
HKR,,Controller,1,01
[EHCIXP.CopyFiles.NT]
usbehci.sys
[EHCIXP.DelFiles.NT]
usbehci.sys
[EHCIXP.AddService]
DisplayName = %EHCIMP.SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\usbehci.sys
LoadOrderGroup = Base
; XP coinstaller
[EHCIXP.CoInstallers]
CopyFiles=USBHCCOIN.CpoyFiles.NT
AddReg=EHCIXP.CoInstallers_AddReg
[EHCIXP.CoInstallers_AddReg]
HKR,,CoInstallers32,0x00010000,"hccoin.dll,HCCOIN_Entry"
[USBHCCOIN.CpoyFiles.NT]
hccoin.dll
; --------------------------------------------------------------
; XP root hub - xp uses default hub driver
; --------------------------------------------------------------
[ROOTHUB2XP]
CopyFiles=HUBXP.CopyFiles.NT
DelFiles=HUBXP.DelFiles.NT
AddReg=ROOTHUB2XP.AddReg.NT
DelReg=ROOTHUB2XP.DelReg.NT
[HUBXP.CopyFiles.NT]
; use usbhub.sys on the Windows XP system
[HUBXP.DelFiles.NT]
; leave usbhub.sys on the system
[ROOTHUB2XP.AddReg.NT]
HKR,,EnumPropPages32,,"usbui.dll,USBHubPropPageProvider"
[ROOTHUB2XP.DelReg.NT]
HKLM,System\CurrentControlSet\Services\usbhub20
[ROOTHUB2XP.Services]
AddService = usbhub, 0x00000002, ROOTHUB2XP.AddService
DelService = usbhub20
[ROOTHUB2XP.AddService]
DisplayName = %ROOTHUB.SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\usbhub.sys
LoadOrderGroup = Base
; =================== Vendor Sections ==============================
[NEC.Section.NTx86.5.1]
%PCI\VEN_1033&DEV_00E0&REV_01.DeviceDesc%=EHCIXP,PCI\VEN_1033&DEV_00E0&REV_01
%PCI\VEN_1033&DEV_00E0&REV_02.DeviceDesc%=EHCIXP,PCI\VEN_1033&DEV_00E0&REV_02
%USB\ROOT_HUB20.DeviceDesc%=ROOTHUB2XP,USB\ROOT_HUB20
[INTEL.Section.NTx86.5.1]
%PCI\VEN_8086&DEV_24CD.DeviceDesc%=EHCIXP,PCI\VEN_8086&DEV_24CD
;=================== Strings Sections =======================
[Strings]
Distribution="Windows XP USB 2.0 (EHCI) Driver Disk"
Msft="Microsoft"
USBClassName="Universal Serial Bus controllers"
EHCIMP.SvcDesc="Microsoft USB 2.0 Enhanced Host Controller Miniport Driver"
;Vendor List
NEC.MFG = "NEC"
INTEL.MFG = "INTEL"
;Device List
PCI\VEN_1033&DEV_00E0&REV_01.DeviceDesc="NEC PCI to USB Enhanced Host Controller B0"
PCI\VEN_1033&DEV_00E0&REV_02.DeviceDesc="NEC PCI to USB Enhanced Host Controller B1"
PCI\VEN_8086&DEV_24CD.DeviceDesc="Intel PCI to USB Enhanced Host Controller"
USB\ROOT_HUB20.DeviceDesc="USB 2.0 Root Hub"
USB\HubClass.DeviceDesc="HUB Support for USB 2.0"
ROOTHUB.SvcDesc="USB Root Hub (usbport)"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.