1. PCN110.exe Driver
2. PDIPX.TXT File Contents

PDIPX.TXT Driver File Contents (PCN110.exe)

==================================================================
NOTES ON
Installing Maxtech PCN110 Fast Ethernet PC Card
For IPX SHELL Users
==================================================================
    (c) 1998 Copyright Maxtech, ALL RIGHTS RESERVED

This document contains installation notes, which is not included in the
PCN110 Fast Ethernet PC Card USER'S GUIDE or onscreen instructions,
for IPX SHELL users regarding PCN110 Fast Ethernet PC Card
installation.


This document contains information on the following topics:

1.0 Introduction
2.0 Installation Notes
___________________________________________________________________


1.0 Introduction
----------------

IPX Shell users please also refer to the following:

    -------------------------------------------------------------------
     File                  Description/Installation notes
    -------------------------------------------------------------------
     \PKTDRV\README.TXT    For all Packet driver users


2.0 Installation Notes
----------------------

There are two methods to run the IPX SHELL program:


Method 1
--------

First, in your CONFIG.SYS file, include the DEVICE command.

  Format:
  DEVICE = PCN110PD.SYS [sw] <packet_int_no> <iobase> <irq> <mem> <S#>

Then, add a DPDIPX statement to your AUTOEXEC.BAT file to load driver
every time you start your computer.


  Example:
  ------------------------
  >DPDIPX
  >NETX
  ><change to last driver>
  >LOGIN <username>


Method 2
--------

Issue PCN110PD command at the DOS command prompt.

  Format:
  PCN110PD [sw] <packet_int_no> <iobase> <irq> <mem> <S#>

  Example:
  ------------------------
  >PCN110PD [sw] <packet_int_no> <iobase> <irq> <mem> <S#>
  >DPDIPX
  >NETX
  ><change to last driver>
  >LOGIN <username>