================================================================== NOTES ON Installing Maxtech PCN110 Fast Ethernet PC Card For NetWare Server V4.0 or later Users ================================================================== (c) 1998 Copyright Maxtech ALL RIGHTS RESERVED This document contains PCN110 Ethernet PC Card installation notes, which is not included in the PCN110 Ethernet PC Card USER'S GUIDE or onscreen instructions, for NetWare Server V4.0 or later users. This document contains information on the following topics: 1.0 Overview 2.0 Installation Notes 2.1 First time installation from the installation menu 2.2 Reinstallation from the installation menu 2.3 Modifying an existing NetWare 4.x Server ___________________________________________________________________ 1.0 Overview -------------- Please also refer to the INST_DOS.TXT file on the PCN110 Installation disk. 2.0 Installation Notes ------------------------ ****************************************************************** * Notes: The PC Card should be enabled by Card service. * * Please run DFCD.EXE before starting the server. * * * * Content of CONFIG.SYS * * --------------------- * * Add below item to the CONFIG.SYS file * * * * DEVICE=<PATH>\DFCD.EXE /iop=300 /irq=11 * * ; <PATH> is a directory include DFCD.EXE file . * * ; Please refer to the INST_DOS.TXT for details. * ****************************************************************** 2.1 First time installation from the installation menu -------------------------------------------------------- (for NetWare Server V4.1 only, for other version see below) 1. Proceed with the following steps: Start the NetWare Server. > CD \NWSERVER > SERVER 2. Execute "LOAD INSTALL" after booting up by typing : LOAD INSTALL 3. Select "Driver Options", -> "Configure network drivers", and -> "Select a driver." 4. Press <Insert> key to install an unlisted driver. 5. Please insert release driver diskette into the disk drive. 6. Press <F3> to specify a different <PATH>. <PATH> is directory which includes both PCN110.LAN and PCN110.LDI Example: A:\NETWARE\32BITLAN 7. Select "PCN110.LAN ....". 8. Specify "Slot number". The "Slot number" usually conjugate with PC Card Socket Number. 9. Select "Save parameters and load driver" after configuring the adapter setting. 10. The NetWare server will be loading/binding the driver automatically. 2.2 Reinstallation from the installation menu ----------------------------------------------- (for NetWare 4.1x only, for other version see below) 1. Proceed with the following steps: Start the NetWare Server. > CD \NWSERVER > SERVER 2. Execute "LOAD INSTALL" after booting up by typing :LOAD INSTALL 3. Select "Driver Options", -> "Configure network drivers", and -> "Select a driver". 4. Select "PCN110.LAN ...." in Select a driver windows. 5. Specify "Slot number". The "Slot number" usually conjugate with PC Card Socket Number. 6. Select "Save parameters and load driver" after configuring the adapter setting. 7. NetWare server will be loading/binding the driver automatically. 2.3 Modifying an existing NetWare 4.x Server --------------------------------------------- 1. Proceed with the following steps: Make a sub-directory NLMS.OLD under NWSERVER directory. Example: >MD \NWSERVER\NLMs.OLD 2. Save NBI.NLM, MSM.NLM and ETHERTSM.NLM to NLMS.OLD sub-directory. 3. Please insert release driver diskette into the disk drive. 4. Copy all provided NLM and LAN files into your DOS directory which will include the SERVER.EXE file. >COPY <PATH>\*.NLM C:\NWSERVER >COPY <PATH>\*.LAN C:\NWSERVER Example: >COPY A:\NETWARE\32BITLAN\*.NLM C:\NWSERVER >COPY A:\NETWARE\32BITLAN\*.LAN C:\NWSERVER <PATH> here is the directory where the support NLMs and PCN110.LAN reside. 5. Start the NetWare Server. > CD \NWSERVER > SERVER 6. From the Novell Server side, execute "LOAD INSTALL" by typing :LOAD INSTALL Select <NCF files options> Select <Edit AUTOEXEC.NCF file> 7. Add the item below into the server's AUTOEXEC.NCF file. LOAD C:\NWSERVER\NBI.NLM LOAD C:\NWSERVER\MSM.NLM LOAD C:\NWSERVER\ETHERTSM.NLM LOAD C:\NWSERVER\PCN110 SLOT=1 FRAME=Ethernet_802.3 NAME=PCN110_1_E83 BIND IPX PCN110_1_E83 NET=xxxx LOAD C:\NWSERVER\PCN110 SLOT=1 FRAME=Ethernet_802.2 NAME=PCN110_1_E82 BIND IPX PCN110_1_E82 NET=xxxx LOAD C:\NWSERVER\PCN110 SLOT=1 FRAME=Ethernet_II NAME=PCN110_1_EII BIND IPX PCN110_1_EII NET=xxxx LOAD C:\NWSERVER\PCN110 SLOT=1 FRAME=Ethernet_SNAP NAME=PCN110_1_ESP BIND IPX PCN110_1_ESP NET=xxxx 8. Restart the server. ****************************************************************** * Notes: The PC Card should be enabled by Card service. * * Please run the DFCD.EXE file before starting the server. * * * * > DFCD /iop=300 /irq=11 * ****************************************************************** 3.0 Keywords supported by PCN110 ---------------------------------- TP - This keyword specifies that the UTP port on the adapter. TP_FULL_DUPLEX - This keyword selects twisted pair connection to work in full duplex mode. LINE_SPEED - This keyword selects line speed between 10MPBs and 100MBPs on network cards. Allowed values are: 10,100Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.