1. PCN110.exe Driver
2. LMDOS.TXT File Contents

LMDOS.TXT Driver File Contents (PCN110.exe)

==================================================================
NOTES ON
Installing Maxtech PCN110 Fast Ethernet PC Card
For Microsoft LAN Manager for MS-DOS users
==================================================================
    (c) 1998 Copyright Maxtech ALL RIGHTS RESERVED

This document contains PCN110 Fast Ethernet PC Card installation notes,
which is not included in the PCN110 Fast Ethernet PC Card USER'S GUIDE
or onscreen instructions, for Microsoft LAN Manager for MS-DOS users.


This document contains information on the following topics:

1.0   Overview
2.0   Installation Notes
3.0   Example Configuration File


-------------------------------------------------------------------------

1.0 Overview
------------

To install the PCN110 Fast Ethernet PC Card driver, Microsoft LAN Manager
for MS-DOS users please also refer to the following:

-------------------------------------------------------------------
File               Description/Installation Notes
-------------------------------------------------------------------

INST_DOS.TXT       Overall Installation for DOS users,
                   including users of Windows 3.1/3.11.
\NDIS2\README.TXT  Overall installation notes for all NDIS users

2.0   Installation Notes
-------------------------

    1. Change to the LANMAN directory
       Ex:     cd \lanman.dos

    2. Run SETUP.EXE (The setup/configuration program of LANMAN)

    3. Select "Network Drivers..." in "Configuration"

    4. Select <Add New Config>

        If any other adapter installed before, please select
        <Remove Config> first to delete all configuration.
        Then Select <Add New Config> to add new adapter.

    5. Select <Other Driver>

    6. Insert the driver diskette into the drive A or B.

    7. Type the source path.
       Ex:     A: or B:

    8. Select <OK> item twice.

    9. Move the UP/DOWN arrow to the protocol you need.

    10.Press "Space Bar" of Keyboard to mark the protocol
       Ex:     [X] NetBeui
               [ ] TCP/IP

    11.Select <OK> item twice

    12.Select <Save> button to save the configuration.

    13.Press F3 to Exit Setup


3.0  Example Configuration File
-------------------------------
    Please Check the "config.sys" and "autoexec.bat" files at ROOT
    directory. The Sample is as follow:

    config.sys
    ÄÄÄÄÄÄÄÄÄÄ
    DEVICE=C:\DOS\SETVER.EXE
    DEVICE=C:\DOS\HIMEM.SYS /TESTMEM:OFF
    DOS=HIGH
    device=c:\dos\emm386.exe noems x=d000-d7ff
    FILES=20
    BUFFERS=20
    LASTDRIVE=Z
    STACKS=9,256
    Shell=c:\dos\command.com /e:512 /P
    DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
    DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\PCN110\PCN110.DOS

    autoexec.bat
    ÄÄÄÄÄÄÄÄÄÄÄÄ
    C:\DOS\SMARTDRV.EXE /X
    @ECHO OFF
    PROMPT $p$g
    PATH C:\DOS
    SET TEMP=C:\TMP
    @REM = LANMAN 2.1 = DO NOT MODIFY BETWEEN THESE LINES = LANMAN 2.1=
    SET PATH=C:\LANMAN.DOS\BASIC;%PATH%
    LOAD NETBEUI
    NET START WORKSTATION andge_dos
    @REM = LANMAN 2.1 = DO NOT MODIFY BETWEEN THESE LINES = LANMAN 2.1=