Copyright March 2002 by ICP DAS CO., LTD. All right reserved.
Trademark:
Products, names and trade names appeared belongs to their respective owner.
This document describe the way to set the Slave number of the
I-7188EX-ISaGRAF controller.
1. Create a file folder named "7188EG" in your hard drive.
For example, "c:\7188EG".
2. Copy \Napdos\ISaGRAF\7188EG\Driver\7188xw.exe, 7188xw.ini
from the CD_ROM into your "7188EG" folder.
3. Run "\7188EG\7188xw.exe" in your hard drive. A "7188xw" screen
will appear.
4. Link from COM1 or COM2 of your PC to COM1 of the I-7188EG
controller by a RS232 cable.
5. Power off the I-7188EG controller, connect pin "INIT*" to
"GND", and then power it up.
6. If the connection is Ok, messages will appear on the 7188wx screen.
ICP_DAS MiniOS7 for I-7188E Ver. 2.00 build 001,May 16 2003 13:32:53
SRAM:512K, FLASH MEMORY:512K
[CPU=Am188ES]
Serial number= 5A 5A 5A 5A 5A 5A 5A 5A
i-7188E>
7. Type "isa7188e *s=xxx" to set to a new Slave number.
i-7188E> isa7188e *s=5
Set Slave number=5
8.Press ALT_X to exit "7188xw" and close the DOS SHELL, or
COM1/COM2 of the PC will be occupied.
9. Remove the connection between "INIT*" - "GND", reset the
I-7188EG controller.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.