***************************************************************************
**************** D720200 & D720200A Design Resources Release **************
***** All of the Software are under NDA or Software license agreement *****
***************************************************************************
Release Note October.7.2010
Renesas Electronics uPD720200 & uPD720200A
USB 3.0 Host Controller Driver Kit (x86 and x64)
for Windows XP, VISTA, 7 and Server 2008 Release 2
Kit Version : 2.0.26.0 : October 7th, 2010
Copyright (C) Renesas Electronics Corporation 2010 All Rights Reserved
***************************************************************************
NOTE1:
This installer package is generated with the InstallShield2010 SP1.
If the previous driver package(v0.X.X.X , v1.0.1.0 or v1.0.7.0) is installed,
Please uninstall the previous driver package and install new package.
---------------------------------------------------------------------------
Table of Contents
---------------------------------------------------------------------------
1. Release Files
2. Command Line Options
3. History
---------------------------------------------------------------------------
---------------------------------------------------------------------------
1. Release Files
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Date Time Size File Name Version
--EXE(Installer Package)
2010/10/07 11:47 9057KB RENESAS-USB3-Host-Driver-20260-setup.exe 2.0.26.0
2010/04/27 13:49 1KB setup.iss
2010/10/07 13:01 924KB InstallShield 2010 SP1 Projects-101007.zip
--ZIP
2010/08/09 15:33 6962KB RENESAS-USB3-Host-Driver-20260-Setup-x86-x64-Binary.zip 2.0.26.0
---contents
2009/09/11 9:10 21KB 0x0C04.ini
2009/09/11 14:50 21KB 0x2C0a.ini
2009/05/20 16:30 24KB 0x040a.ini
2009/03/18 15:05 22KB 0x040b.ini
2009/05/20 17:27 25KB 0x040c.ini
2009/03/16 14:23 18KB 0x040d.ini
2009/03/18 15:07 22KB 0x040e.ini
2009/05/20 16:46 22KB 0x041b.ini
2009/05/20 16:46 22KB 0x041d.ini
2009/03/18 15:15 22KB 0x041e.ini
2009/05/20 16:58 22KB 0x041f.ini
2009/05/20 16:55 19KB 0x0401.ini
2009/05/21 17:44 11KB 0x0404.ini
2009/05/20 17:03 22KB 0x0405.ini
2009/05/20 17:03 23KB 0x0406.ini
2009/05/20 17:22 25KB 0x0407.ini
2009/03/18 15:26 26KB 0x0408.ini
2009/05/21 15:53 21KB 0x0409.ini
2009/05/20 17:06 24KB 0x0410.ini
2009/06/08 16:45 15KB 0x0411.ini
2009/03/16 14:28 14KB 0x0412.ini
2009/05/20 17:07 24KB 0x0413.ini
2009/05/20 17:08 23KB 0x0414.ini
2009/05/20 17:09 23KB 0x0415.ini
2009/05/20 17:09 23KB 0x0416.ini
2009/05/20 17:12 22KB 0x0419.ini
2009/05/20 17:13 23KB 0x0424.ini
2009/05/21 17:44 11KB 0x0804.ini
2009/05/20 17:14 24KB 0x0816.ini
2010/10/07 11:17 92KB 1025.mst
2010/10/07 11:17 82KB 1028.mst
2010/10/07 11:17 101KB 1029.mst
2010/10/07 11:17 101KB 1030.mst
2010/10/07 11:17 111KB 1031.mst
2010/10/07 11:17 111KB 1032.mst
2010/10/07 11:17 37KB 1033.mst
2010/10/07 11:17 109KB 1034.mst
2010/10/07 11:17 101KB 1035.mst
2010/10/07 11:17 109KB 1036.mst
2010/10/07 11:17 59KB 1037.mst
2010/10/07 11:17 106KB 1038.mst
2010/10/07 11:17 110KB 1040.mst
2010/10/07 11:17 105KB 1041.mst
2010/10/07 11:17 98KB 1042.mst
2010/10/07 11:17 104KB 1043.mst
2010/10/07 11:17 98KB 1044.mst
2010/10/07 11:17 104KB 1045.mst
2010/10/07 11:17 103KB 1046.mst
2010/10/07 11:17 100KB 1049.mst
2010/10/07 11:17 102KB 1051.mst
2010/10/07 11:17 98KB 1053.mst
2010/10/07 11:17 97KB 1054.mst
2010/10/07 11:17 99KB 1055.mst
2010/10/07 11:17 102KB 1060.mst
2010/10/07 11:17 81KB 2052.mst
2010/10/07 11:17 104KB 2070.mst
2010/10/07 11:17 37KB 3076.mst
2010/10/07 11:17 37KB 11274.mst
2010/10/07 11:17 4857KB ISSetup.dll
2010/10/07 11:17 763KB nusb3drv.msi
2010/10/07 11:48 972KB setup.exe
2010/10/07 11:17 3KB Setup.ini
2010/04/27 13:49 1KB setup.iss
----Files
2010/04/27 09:33 95KB nusb3mon.dll 2.0.0.0
2010/04/27 10:09 111KB nusb3mon.exe 2.0.0.0
2010/10/04 09:09 307KB nusb3utl.exe 2.0.26.0
2010/10/04 08:30 48KB nusb3ver.dll 2.0.26.0
-----0C0A
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0C04
2010/04/14 09:30 2KB nusb3mon.exe.mui
2010/09/30 12:56 2KB nusb3utl.exe.mui
-----2C0A
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----040A
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----040B
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----040C
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----040D
2010/04/14 09:31 3KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----040E
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----041B
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:56 3KB nusb3utl.exe.mui
-----041D
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:56 3KB nusb3utl.exe.mui
-----041E
2010/04/14 09:30 3KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----041F
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0401
2010/04/14 09:30 3KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0404
2010/04/14 09:30 3KB nusb3mon.exe.mui
2010/09/30 12:57 2KB nusb3utl.exe.mui
-----0405
2010/04/14 09:31 3KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0406
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0407
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0408
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0409
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:56 3KB nusb3utl.exe.mui
-----0410
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0411
2010/04/14 09:30 3KB nusb3mon.exe.mui
2010/09/30 12:57 2KB nusb3utl.exe.mui
-----0412
2010/04/14 09:30 3KB nusb3mon.exe.mui
2010/09/30 12:57 2KB nusb3utl.exe.mui
-----0413
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0414
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:56 3KB nusb3utl.exe.mui
-----0415
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:56 3KB nusb3utl.exe.mui
-----0416
2010/04/14 09:31 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----0419
2010/04/14 09:30 4KB nusb3mon.exe.mui
2010/09/30 12:56 3KB nusb3utl.exe.mui
-----0424
2010/04/14 09:30 3KB nusb3mon.exe.mui
2010/09/30 12:56 3KB nusb3utl.exe.mui
-----0804
2010/04/14 09:31 3KB nusb3mon.exe.mui
2010/09/30 12:57 2KB nusb3utl.exe.mui
-----0816
2010/04/14 09:31 4KB nusb3mon.exe.mui
2010/09/30 12:57 3KB nusb3utl.exe.mui
-----x64
2010/10/05 17:47 8KB nusb3hub.cat
2010/09/30 13:01 3KB nusb3hub.inf
2010/09/30 13:00 79KB nusb3hub.sys 2.0.26.0
2010/10/05 17:47 8KB nusb3xhc.cat
2010/09/30 13:01 2KB nusb3xhc.inf
2010/09/30 13:00 177KB nusb3xhc.sys 2.0.26.0
-----x86
2010/10/05 17:47 8KB nusb3hub.cat
2010/09/30 13:01 3KB nusb3hub.inf
2010/09/30 12:59 61KB nusb3hub.sys 2.0.26.0
2010/10/05 17:47 8KB nusb3xhc.cat
2010/09/30 13:01 2KB nusb3xhc.inf
2010/09/30 12:59 139KB nusb3xhc.sys 2.0.26.0
---------------------------------------------------------------------------
---------------------------------------------------------------------------
2. Command Line Options
---------------------------------------------------------------------------
---------------------------------------------------------------------------
1)Silent install
Ex.) setup.exe /s
-To install this driver package silently, "setup.iss" file is needed.
This package includes the "setup.iss" in which the following folder
path is set.
"C:\Program Files\Renesas Electronics\USB 3.0 Host Controller Driver".
If you want to change install path, you need to generate setup.iss as
follows: setup /r /f1".\setup.iss"
2)Check existence of USB3.0 Host Controller
Ex.) setup.exe /v"CHECK_HW_EXIST=1"
-When this command line option is set, the installer checks existence of
the USB3.0 Host Controller(uPD720200/uPD720200A). If the uPD720200/uPD720200A
is not in the PC, this installer does not install the device drivers.
##Caution##
To install the device drivers with this command line option after
uninstalling the device drivers, it is necessary to restart the PC.
3) Not install the USB3.0 Monitor application (nusb3mon.exe/dll)
/v"NO_MONITOR=1"
-When this command line option is set, the USB3.0 Monitor Application
(nusb3mon.exe/dll) is not installed.
##Caution##
If the USB3.0 Monitor Application is already installed, it is necessary to
uninstall the USB3 driver package of previous version before installing the
new USB3 driver package (v1.0.19.0 or later).
4) Not install the USB3.0 Utility application (nusb3utl.exe)
/v"NO_UTILITY=1"
-When this command line option is set, the USB3.0 Utility Application
(nusb3utl.exe) is not installed.
##Caution##
If the USB3.0 Utility Application is already installed, it is necessary to
uninstall the USB3 driver package of previous version before installing the
new USB3 driver package (v2.0.4.0 or later).
5) Disable the Selective Suspend function
Ex.) setup.exe /v"SET_SELSUS_MODE1=1"
-Selective Suspend function is enabled by default starting with Ver2.0.20.0.
This option disables the Selective Suspend function. The Selective Suspend
function is described in section 1.4 & 2.8 of "USB 3.0 Host Controller Driver
Application Note (ISG-NC1-200030)". Please see that document for more detail.
##Note##
This option is supported from Ver.2.0.20.0.
The Selective Suspend function for External Hubs is supported from Ver.2.0.20.0.
6) Hide the pop-up message
Ex.) setup.exe /v"CHECK_HW_EXIST=1 NO_MESSAGE=1"
-This option suppresses the pop-up message when it is used with the "CHECK_HW_EXIST"
option. If you want to hide the pop-up message on the "CHECK_HW_EXIST" option,
you should use this option on the command line.
-This option is described in section 2.5 & 2.9 of "USB 3.0 Host Controller Driver
Application Note(ISG-NC1-200030)". Please see that document for more detail.
##Note##
This option is supported from Ver.2.0.20.0.
This option must be used only with the "CHECK_HW_EXIST" option. If this option is used
by itself, it has no effect.
[[NEW]]
7) Disable the Dynamic U1/U2 state control function
Ex.) setup.exe /v"U1U2_DISABLE=1"
-The Dynamic U1/U2 state control function is enabled by default starting with
Ver2.0.4.0. If you want to disable the Dynamic U1/U2 state control function,
you should use this option on the command prompt.
##Note##
This option is supported from Ver.2.0.26.0.
[[NEW]]
8) Disable the check box to disable the Dynamic U1/U2 state control function
on "nusb3utl.exe"
Ex.) setup.exe /v"U1U2_UTL_DISABLE=1"
-From ver2.0.26.0, the USB 3.0 Host controller Utility supported the check-box
to disable the Dynamic U1/U2 state control function. This check-box is appeared
in default setting.
If you don't want to display this checkbox on USB3.0 Host controller Utility,
you should use this option on the command prompt.
##Note##
This option is supported from Ver.2.0.26.0.
---------------------------------------------------------------------------
---------------------------------------------------------------------------
3. History
---------------------------------------------------------------------------
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Version 2.0.26.0 : October 7th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
Submission ID: 1426595
Product Name: Renesas Electronics USB3.0 Host Controller
Category: Device
Subcategory: Bus Controllers and Ports > USB Controller
Qualification Level: Logo - Designed for Microsoft Windows XP family, x86 - DFW
Logo - Designed for Microsoft Windows XP family, x64 - DFW
Logo - Microsoft Windows Vista family, x86 Basic - Basic
Logo - Microsoft Windows Vista family, x64 Basic - Basic
Logo - Device - Compatible with Windows 7
Logo - Device - Compatible with Windows 7 x64
Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64
- Added the new function in "nusb3utl.exe" which can disable/enable
"Dynamic U1/U2 state control function".
- The following issues were fixed.
1. Bluescreen occurred when 3G modem card (TD-SCDMA RX-310) is connected to the PC through
USB3 Host Controller.
2. Yellow bang issues occurred when the following USB devices are connected
to the PC through USB3 Host Controller.
a)Pinnacle Systems PCTV MCE IR Transceiver (Receiver)
b)Philips OVU4003/00 (Remote Receiver)
c)Philips RC1534501/00 (Remote controller)
---------------------------------------------------------------------------
Version 2.0.20.0 : August 13th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
Submission ID: 1417969
Product Name: Renesas Electronics USB3.0 Host Controller
Category: Device
Subcategory: Bus Controllers and Ports > USB Controller
Qualification Level: Logo - Designed for Microsoft Windows XP family, x86 - DFW
Logo - Designed for Microsoft Windows XP family, x64 - DFW
Logo - Microsoft Windows Vista family, x86 Basic - Basic
Logo - Microsoft Windows Vista family, x64 Basic - Basic
Logo - Device - Compatible with Windows 7
Logo - Device - Compatible with Windows 7 x64
Logo - Certified for Microsoft Windows Server 2008 Release 2 family, x64
- Supported the Windows Server 2008 Release 2 (x64)
- Supported the Selective Suspend function for an External Hub.
Please see section 1.4 & 2.8 of "USB 3.0 Host Controller Driver Application
Note" for more detail.
- The following issues were fixed.
1. On "Devices and Printers" of Windows 7, Bus reported device description
of device's Property was not shown when USB devices were connected to the
computer through USB 3.0 Host Controller.
2. USB3 Driver didn't support the Dynamic U1/U2 state control function for
USB3 Devices which support the Periodic Endpoint.
3. There was an issue with the Control transfer. This issue occurred in the
following cases.
Case1. Yellow bang issues occurred when USB devices is connected
to the PC through USB3 Host Controller.
Case2. USB3 Host Controller cannot receive the Vendor Requests.
##Caution##
This issue occurs in Ver2.0.4.0 only. This does not occur with
Ver1.0.20.0 or earlier.
4. After suspend & resume with Microsoft's Zune HD connected through the
USB 3.0 Host Controller, Device manager showed the yellow bang for this
device.
- Hardware Ids of device's Property were designed as mixed-case on all Windows OS.
From Ver2.0.20.0, Hardware Ids of device's Property are designed as follows.
Windows XP : Vid_XXXX (Designated by mixed-case)
Windows 7/Vista : VID_XXXX (Designated by capital letters only)
---------------------------------------------------------------------------
Version 2.0.4.0 : May 14th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
Submission ID: 1403710
- Dynamic U1/U2 state control function was enabled.
- Driver Provider Name in the INF file was changed from NEC Electronics
to Renesas Electronics.
- "Discontine storage access" issue was fixed.
(Although we fixed "Discontinue storage access" issue in V1.0.19.0,
we found some cases where this issue was reproduced.)
---------------------------------------------------------------------------
Version 1.0.20.0 : March 31th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
Submission ID: 1397746
##Note##
The Drivers in this package are certified with WLK1.5.
From the WLK1.5, categories for which USB3.0 xHCI drivers should be submitted
were changed as follows.
Submission Categories
USB3 Host Controller : Device - USB Controller
USB3 Root Hub : Unclassified
With this change, the INF file for driver installation is separated into
two files. The nusb3xhc.inf is for the USB3 Host Controller, and the
usb3hub.inf is for the USB3 Root hub.
- The following bugs were fixed
1. UQ WiMAX USB module (UD01SS) is not detected correctly.
2. There is a possibility that bluescreen occurs when attempting hot plug
operations at the downstream port of the USB2.0 HUB connected with
the USB3.0 port.
---------------------------------------------------------------------------
Version 1.0.19.0 : Februay 5th, 2010
---------------------------------------------------------------------------
- Windows Logo Information
Submission ID: 1387363
- The following functions were added.
1. One of the notifications that we reported in the IBB-ND0-100001
(Notification and product restriction information, Dec 14th 2009),
"Discontinue storage access after sleep(S3) and hibernation(S4) in
PC system", is fixed.
2. When disabling a SS Device with safely remove, the USB port connected
with the SS device is placed in U3 instead of U0.
- Added command line option to this installer.
/v"NO_MONITOR=1"
- When this command line option is set, the USB3.0 Monitor Application
(nusb3mon.exe/dll) is not installed.
##Caution##
If the USB3.0 Monitor Application is already installed, it is necessary to
uninstall the USB3 driver package of previous version before installing the
new USB3 driver package(v1.0.19.0 or later).
---------------------------------------------------------------------------
Version 1.0.18.0 : December 1st, 2009
---------------------------------------------------------------------------
We received Device Logo in the USB Controller Subcategory of the WLK1.4.
As for system logo test,
Microsoft announced testing process for USB3.0 xHCI Controller below.
http://www.microsoft.com/whdc/whql/resources/news/whqlnews_112409.htm
- Windows Logo Information
Submission ID: 1377656
Product Name: NEC Electronics USB3 Host-01
Category: Device
Subcategory: Bus Controllers and Ports > USB Controller
Qualification Level: Signature Only - Microsoft Windows XP family, x86 - Unclassified
Signature Only - Microsoft Windows XP family, x64 - Unclassified
Logo - Microsoft Windows Vista family, x86 Basic - Basic
Logo - Microsoft Windows Vista family, x64 Basic - Basic
Logo - Device - Compatible with Windows 7
Logo - Device - Compatible with Windows 7 x64
- The following bugs were fixed.
1. When host driver is disabled and uPD720200 goes to D3hot state,
CLKREQ# does not work.
2. When connectiong a certain Keyboard with fingerprint function,
PC can't enter S3/S4/S5 state.
3. When using a certain ZIP Drive, file transfer is aborted.
---------------------------------------------------------------------------
Version 1.0.17.0 : Nobember 2nd, 2009
---------------------------------------------------------------------------
- This version includes the CAT files signed by
Microsoft Windows Hardware Compatibility Publisher.
This device driver complies with WHQL certification as Unclassified
Category on Windows XP, Vista & 7.
The Submission ID for WHQL certification is 1371310.
- The following bug was fixed.
1. Function drivers were not unloaded when disconnectiong gold tree from
the roothub port of USB3 HC.
2. After Warm Reset was issued, enumeration process might fail.
- InstallShield project file, License.rtf and versionDLL were updated.
- The following functions were added.
1. When Link Errors frequently occur in the SuperSpeed-Port, driver changes
the connection from the SuperSpeed to HighSpeed.
2. Transfer throughput was improved.
3. Dynamic U1/U2 state control function was disabled. When enabling U1/U2
function, the device that used SuperSpeed link with host went down unexpectedly.
We decided to disable this function to get interoperability.
To get better interoperability, please use the FW version 3.0.2.1
released Nov.2nd 2009 or later.
---------------------------------------------------------------------------
Version 1.0.14.0 : October 6th, 2009
---------------------------------------------------------------------------
- This version includes the CAT files signed by
Microsoft Windows Hardware Compatibility Publisher.
This device driver complies with WHQL certification as Unclassified
Category on Windows XP, Vista & 7.
The Submission ID of WHQL certification is 1358042.
- The following bugs are fixed.
1. If the USB Device has multiple Endpoints with same EndpointAddress,
the USB Device is not enumerated.
2. A USB2.0 Device connected with mulitiple layered USB2.0 HUB is not detected
after resuming Sleep and Hibernate.
- Updated InstallShield project file, script file, customDLL & versionDLL.
- Added the following functions to this installer.
1. Command line option for checking existence of USB3.0 Host Controller.
/v"CHECK_HW_EXIST=1"
When this command line option is set, the installer checks existence of
the USB3.0 Host Controller(uPD720200). If the uPD720200 is not in the PC,
this installer does not install the device drivers.
##Caution##
To install the device drivers with this command line option after uninstalling
the device drivers, it is necessary to restart on the PC.
2. Previously, this installer did not install device drivers to the PC
in which device drivers with same version are already installed.
In this version, it reinstalls the device drivers to the PC.
---------------------------------------------------------------------------
Version 1.0.12.0 : September 11th, 2009
---------------------------------------------------------------------------
- Updated End User Licence Agreement.
- This version includes the CAT files signed by
Microsoft Windows Hardware Compatibility Publisher.
This device driver complies with WHQL certification as Unclassified
Category on Windows XP, Vista & 7.
The Submission ID of WHQL certification is 1349589.
- This package includes "Install Shield 2010 Project Files" in the EXE folder
so that cusotmers can customize the install package.
- Installer Wizard Messages, "nusb3mon.exe" and "nusb3utl.exe" support
the following languages.
LCID : Language
0401 : Arabic
0404 : Traditional Chinese
0405 : Czech
0406 : Danish
0407 : German
0408 : Greek
0409 : English
040A : Spanish (Traditional)
040B : Finnish
040C : French
040D : Hebrew
040E : Hungarian
0410 : Italian
0411 : Japanese
0412 : Korean
0413 : Dutch
0414 : Norwegian (Bokmal)
0415 : Polish
0416 : Portuguese (Brazilian)
0419 : Russian
041B : Slovak
041D : Swedish
041E : Thai
041F : Turkish
0424 : Slovenian
0804 : Simplified Chinese
0816 : Portuguese(Standard)
0C04 : Chinese (Hong Kong)
0C0A : Spanish (Modern)
2C0A : Spanish (Latin America)
- The following bugs are fixed.
1. Bluescreen sometimes occurs when starting WebCam application.
2. The mouse-supported SelectiveSuspend function does not work when
it wakes up from suspend state.
3. Can't access CD-ROM Media in a Blu-Ray Drive.
- Optimized SS/HS bulk transfer performance
---------------------------------------------------------------------------
Version 1.0.10.0 : August 26th, 2009
---------------------------------------------------------------------------
- This version includes the CAT files signed by
Microsoft Windows Hardware Compatibility Publisher.
This device driver complies with WHQL certification as Unclassified
Category on Windows XP, Vista & 7.
The Submission ID of WHQL certification is 1346130.
- All files except for the CAT files are the same as Version1.0.10.0 Beta2
---------------------------------------------------------------------------
Version 1.0.10.0Beta2 : August 24th, 2009
---------------------------------------------------------------------------
- This version includes Microsoft TestSigned CAT Files.
Note: If this driver package is used on x64 Windows Vista/7,
need to set the following command.
>bcdedit -set TESTSIGNING ON
- This installer package is generated with the InstallShield2010.
If the previous driver package (v0.X.X.X , v1.0.1.0 or v1.0.7.0) is installed,
please uninstall the previous driver package and install the new package.
- Installer Wizard Messages, "nusb3mon.exe" and "nusb3utl.exe" support
the following languages.
LCID : Language
404 : Traditional Chinese
407 : German
409 : English
40A : Spanish
40C : French
410 : Italian
411 : Japanese
412 : Korean
413 : Dutch
804 : Simplified Chinese
816 : Portuguese(Standard)
- The following bugs are fixed.
1. Some hub devices are not detected after resuming Sleep and Hibernate.
2. Bluescreen occurs after resuming Sleep and Hibernate.
- Known issue. This issue will fixed in the next version.
1. Bluescreen sometimes occurs when starting WebCam application.
---------------------------------------------------------------------------
Version 1.0.7.0Beta : July 17th, 2009
---------------------------------------------------------------------------
- The following bugs are fixed.
1. USB Devices are not detected after resuming from Sleep and Hibernate.
2. Bluescreen occurs after resuming from Sleep and Hibernate.
3. USB-VGA Devices do not work correctly.
4. The message that bandwidth is getting low might not be indicated.
-The following function is Added
1. Add a Vender Defined Command.
---------------------------------------------------------------------------
Version 1.0.1.0Beta : June 15th, 2009
---------------------------------------------------------------------------
- This package includes the following applications.
1. nusb3mon.exe
This application provides the following function
USB3.0 Specificatin Section 11.1 indicates the follwoing function.
To address the situation where a USB 3.0 device is connected to a
USB 2.0-only port on a USB 3.0- capable host, after establishing a
USB 2.0 high-speed connection with the device, it is recommended
that the host inform the user that the device will support
SuperSpeed operation if it is moved to a USB 3.0-capable port on the
same host. If a USB 3.0 device is connected to a USB 3.0- capable
host via a USB 2.0 hub, it is recommended that the host inform the
user that the device will support SuperSpeed operation if it is
moved to an appropriate host port or if the hub is replaced with a
USB 3.0 hub.
2. nusb3utl.exe
This application provides functions that show Driver Version
and Firmware Version.
- The following bugs are fixed.
1. Function driver is not unloaded after resuming from Sleep and Hibernate.
2. USB Remote wake up function does not work correctly.
3. Bluescreen occured when repeating hot-plug of FS-Speaker Device
that is connected with HS-Hub that is connected to USB3.0 HC.
---------------------------------------------------------------------------
Version 0.9.12.0Beta : May 29th, 2009
---------------------------------------------------------------------------
- Changed installer package configuration.
1. EXE type
*All files are included in the EXE file.
*Combined x86 and x64 in one package.
2. ZIP type
*Conposed of 3 contents, setup.exe, x86 folder and x64 folder.
*All files for x86 are in x86 folder.
*All files for x64 are in x64 folder.
*Setup.exe installs drivers automatically.
---------------------------------------------------------------------------
Version 0.9.12.0Beta : May 27th, 2009
---------------------------------------------------------------------------
- The following bugs are fixed.
1. Function driver is not unloaded after resuming from Sleep and Hibernate.
2. When repeating hot-pulg of a USB2.0 device, the device is not detected.
3. When connecting two USB Devices and after resuming from Sleep and Hibernate,
both devices are not detected.
4. Bluescreen occurred when USB-VGA device is running.
5. Dual Display mode of a USB-VGA device can't operate.
---------------------------------------------------------------------------
Version 0.9.4.0Beta : March 27th, 2009
---------------------------------------------------------------------------
- Support for Super Speed Transactions
---------------------------------------------------------------------------
Version 0.9.3.0Beta : March 9th, 2009
---------------------------------------------------------------------------
- The following bugs are fixed.
1. If the system is booted up with a USB device already present on the USB
port, the USB port is inoperative and cannot recover even if the
USB device is unplugged and then plugged back in.
---------------------------------------------------------------------------
Version 0.9.0.0Beta : February 9th, 2009
---------------------------------------------------------------------------
- First Beta Version Release
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.