Release.txt Driver File Contents (

Realtek 8139 and 8139C+ NDIS 5.1 driver (for Windows Vista)

Updated driver : Please visit


Version 6.105.0713
1. Add switch for shutdown wakeup-on-lan, users could disable shutdown WOL to reduce power consumption after shutdown

 PS: Version 6.104 always disable shutdown WOL


Version 6.104.0612
1. Fix transmission failed on a old platform, intel 865
2. Fix RX DPC routine to prevents CPU long time occupied


Version 6.103.0111
1. Lower CPU utilization
2. Fix transmission error if EEPROM CLKRUN_EN value is on but actually system does not support CLKRUN


Version 6.102.0110
1. Fix the driver bug: spend too much time to resume from s3/s4


Version 6.101.1124
1. Fix the driver bug: 'Network Address' not reset to original to MAC address
  After 'Network Address' changed and then cleared, the MAC address does not reset to the original one.
  ('Network Address' is in the Device Manager | Properties | Advanced | Property)
2. Fix the driver bug : panasonic notebook performance is slow in battery mode

3. Fix the driver bug : Magic packet may not wake up when host in S5 state

4. lower CPU utilization


Version 6.100.1106

1. Version major number changed

  Use for distinct version number from Windows XP

2. fix system fails to wakeup bug

  The mask is incorrect if the added wakeup pattern length is short

3. fix unicast wake up bug. 

  Even the system only accept magic packet, it wakes when receives a unicast frame


Version 5.642

1. first version for Vista logo


Version 5.641

1. Add some OIDs for 3rd-party diagnostic application


Version 5.640

1. inbox for Windows Vista


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.53