1. server_INTEL_10_4.zip Driver
2. ldistrib.txt File Contents

ldistrib.txt Driver File Contents (server_INTEL_10_4.zip)

Linux* Distribution Issues
==========================

March 14, 2005

This document covers known issues between Intel networking drivers
and various supported Linux distributions.


Contents
========

- Legal Notice
- Overview
- Linux Kernel Issues
- SUSE* Linux Issues
- SUSE Linux Enterprise Server Issues
- Red Hat Enterprise Linux AS Issues
- Support


Legal Notice
============

This software program is released under the terms of a license agreement
between you ('Licensee') and Intel.  Do not use or load this software or 
any associated materials (collectively, the 'Software') until you have 
carefully read the full terms and conditions of the LICENSE located in this 
software package.  By loading or using the Software, you agree to the terms 
of this Agreement.  If you do not agree with the terms of this Agreement, 
do not install or use the Software.

Copyright(c) 2005 Intel Corporation.  All rights reserved.

Intel Corporation, 5200 N.E.  Elam Young Parkway, Hillsboro, OR 97124-6497

Intel Corporation assumes no responsibility for errors or omissions in 
this document. Nor does Intel make any commitment to update the information
contained herein.


Overview
========

This file describes Linux distribution-specific issues.  For
general information and support, see the Support page.

If an issue is identified with the released source code on the
supported kernel with a supported adapter, email the specific
information related to the issue to linux.nics@intel.com.


Linux Kernel Issues
===================

Linux 2.6 Kernel: Loading and unloading modules
-----------------------------------------------
A new kernel API has been implemented within the Linux 2.6 kernel
regarding the module reference count.  This results in the e100,
e1000 and ixgb drivers  being used with a module reference count
of zero.  Consequently, our driver module can be removed from the
system while still being used by other modules.  Until the other
modules within the Linux stack use the new API, unintended
consequences may occur with module removal.  This may result in
system hangs and/or panics.


Linux 2.4 Kernel: Intel(R) Desktop Board D915GEV and PCIe Adapters
------------------------------------------------------------------
If you install a PCI Express (PCIe) adapter in a system based on an
Intel(R) Desktop Board D915GEV with a Linux distribution using kernel
version 2.4 (such as RHEL 3), the system may panic or hang.  This
behavior has been observed with various brands of PCIe adapters
besides those from Intel.  This does not occur on a Linux distribution
using a v2.6 kernel, such as Red Hat EL 4 AS or SLES 9.  Booting with
the NOAPIC kernel parameter will also workaround this problem for
systems using a 2.4 kernel.


SUSE Linux 9.3 and 10
=====================

Unable to pass traffic with UP or SMP kernel with "noapic"
----------------------------------------------------------
In the default (UP) kernel config, APIC is being turned off while MSI
is being turned on.  MSI requires that LOCAL_APIC be turned on to work
successfully.

This is a kernel config problem in these versions:
- SUSE Linux 9.3 (kernel 2.6.11.4-20a-default)
- SUSE Linux 10 (kernel 2.6.13-15-default)

To get PCIe adapters to function properly with these UP kernels, use
the "apic" kernel option.


SUSE Linux Enterprise Server (SLES) Issues
==========================================

SLES (based on v2.4 kernels): ACPI enable may cause Intel(R) Dual Port
PRO/1000 Adapters to fail
-------------------------------------------------------------
If ACPI is turned on in the kernel, Intel Dual Port PRO/1000 Adapters
may not work.  This is due to a limitation in ACPI.


SUSE Linux Enterprise Server 9: Warning message during driver build
-------------------------------------------------------------------
While building the driver on SUSE Linux Enterprise Server 9
installations, the following warning or something similar may be
displayed.

  Symbol version dump /usr/src/<kernel-version>-obj/<arch>/
  <kernel flavor>/ Module.symvers is missing, modules will have
  CONFIG_MODVERSIONS disabled.

It is safe to ignore this message.  The driver will load and function
normally.

While loading the driver, the following warnings in the syslog may be
ignored:

  linux kernel: <driver name>: no version for "struct_module" found:
  kernel tainted.

  linux kernel: <driver name>: unsupported module, tainting kernel.

  linux kernel: <driver name>: module not supported by Novell, setting
  U taint flag.


SUSE Linux Enterprise Server 8 for Intel(R) Itanium: Unresolved Symbols
-----------------------------------------------------------------------
If you get unresolved symbol errors when loading the e1000 driver,
perform the following:

  1.  cd /usr/src/linux
  2.  make cloneconfig
  3.  make dep

Then rebuild the driver.


Red Hat Enterprise Linux AS Issues
==================================

Red Hat Enterprise Linux AS 4
-----------------------------
In Version 2.5.50, unplugging network cable while ethtool -p is running
will cause system to become unresponsive to keyboard commands, except for
control-alt-delete.  Restarting the system appears to be the only remedy.
This occurs in distributions later than v2.5.50.

Red Hat Enterprise Linux AS 3
-----------------------------
While building the driver on Intel(R) Itanium systems, the following
warnings may be ignored:

  warning: unused variable `ptr'

  Use of 'mov' may violate WAW dependency


Red Hat Enterprise Linux AS 2.1
-------------------------------
In Update 3, if there are errors while compiling the driver, do the
following:

  1.  Change to the kernel source directory.
  2.  Perform all the required steps to build the kernel up to and
      including make dep.
  3.  Modify EXTRAVERSION in the Makefile in Red Hat kernel source
      directory to match the version of the running kernel.
  4.  Build the driver, using instructions located in the README file.

While building the driver, the following warning may be ignored:

   /lib/modules/2.4.9-e.34/build/include/linux/rhconfig.h:31:60:
   operator '(' has no left operand

NOTE: Go to www.redhat.com for Red Hat's procedure for building a
      Linux kernel.

NOTE: This problem is resolved in Red Hat Enterprise Linux AS 2.1
      Update 4.


Support
=======

For general information and support, go to the Intel support website at:

  http://support.intel.com

or the Intel Wired Networking project hosted by Sourceforge at:

    http://sourceforge.net/projects/e1000

If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related
to the issue to e1000-devel@lists.sf.net


Trademarks
==========

Intel, Itanium, and Pentium are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and other
countries.

* Other names and brands may be claimed as the property of others.