FintekHidCir.inf Driver File Contents (6637_CIR_xp_aio.zip)

[Version]
Signature="$CHICAGO$"
;Class=USB
;ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
Class=HIDClass
ClassGuid={745a17a0-74d3-11d0-b6fe-00a0c90f57da}
Provider=%VENDOR%
CatalogFile=FintekHidCir.cat
LayoutFile=layout.inf
DriverVer=08/14/2008,5.1.2600.5512

;
;   Layout.inf (etc.) list all files shipped with the operating system so the 
;   source description sections are only needed if other files are needed.
;   
;   In order to use IHV drivers, the SourceDisksNames section must list the 
;   disk(s) containing the drivers and the SourceDisksFiles section must list 
;   which disk number each file to be copied is found on.
;   Disk number 99 is used to avoid a conflict with the disk numbers defined 
;   in layout.inf
;
;   Files used in a driver installation need to be digitally signed otherwise 
;   installation may fail.  See documentation elsewhere in the DDK regarding 
;   driver signing.
;
;[SourceDisksNames]
;1=%DiskId%,,
;
;[SourceDisksFiles]
;FintekHidCir.sys = 1


[DestinationDirs]
CopyFilesSYS = 12     ; should it be 10 to take care of 98 stuff??????
CopyFilesDLL = 11     ; %SystemRoot%\system or system32 - 98 or Win2000

[Manufacturer]
%VENDOR%=Vendor

[Vendor]
%FintekHidCir% = FintekHidCir.Inst, USB\VID_1934&PID_0702

[ControlFlags]
ExcludeFromSelect  = USB\VID_1934&PID_0702

;===============================================================
;   FintekHidCir (Root Enumerated Hid Device) install section
;===============================================================
[FintekHidCir.Inst]
CopyFiles = CopyFilesSYS_98, CopyFilesDLL
AddReg    = FintekHidCir_98me.AddReg

[FintekHidCir.Inst.NT]
CopyFiles = CopyFilesSYS, CopyFilesDLL

[FintekHidCir.Inst.NT.HW]
AddReg = FintekHidCir_Parameters.AddReg 

[FintekHidCir.Inst.NT.Services]
AddService = FintekHidCir,0x00000002,FintekHidCir_Service_Inst

[CopyFilesSYS]
FintekHidCir.sys
HidClass.sys
HidParse.sys

[CopyFilesSYS_98]
FintekHidCir.sys
HidClass.sys
HidParse.sys

[CopyFilesDLL]
Hid.dll

[FintekHidCir_Parameters.AddReg]
HKR,,"ReadFromRegistry",%REG_DWORD%, 0x00000001
HKR,,DeviceWakeEnable,0x00010001, 00, 00, 00, 00
HKR,,DeviceEnable,0x00010001, 00, 00, 00, 00

[FintekHidCir_98me.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,"FintekHidCir.sys"
HKR,,DeviceWakeEnable,0x00010001, 00, 00, 00, 00
HKR,,DeviceEnable,0x00010001, 00, 00, 00, 00

[FintekHidCir_Service_Inst]
DisplayName    = %FintekHidCir%
ServiceType    = %SERVICE_KERNEL_DRIVER% 
StartType      = %SERVICE_DEMAND_START% 
ErrorControl   = %SERVICE_ERROR_IGNORE% 
ServiceBinary  = %12%\FintekHidCir.sys 

;===============================================================
;   VHidDevice (Virtual Hid Device) install section
; - Only a Null service is installed.
;===============================================================
[VHidDevice.Inst]

[VHidDevice.Inst.NT]

[VHidDevice.Inst.NT.Services]
AddService = ,0x00000002,   ; NULL Service


;================================================================
[Strings] 
;  *******Localizable Strings******* 
VENDOR         = "Fintek Corp." 
FintekHidCir   = "Fintek eHome Infrared Transceiver" 
;VHidDevice     = "Hid Device" 

;  *******Non Localizable Strings******* 

SERVICE_BOOT_START     = 0x0 
SERVICE_SYSTEM_START   = 0x1 
SERVICE_AUTO_START     = 0x2 
SERVICE_DEMAND_START   = 0x3 
SERVICE_DISABLED       = 0x4 

SERVICE_KERNEL_DRIVER  = 0x1 
SERVICE_ERROR_IGNORE   = 0x0 
SERVICE_ERROR_NORMAL   = 0x1 
SERVICE_ERROR_SEVERE   = 0x2 
SERVICE_ERROR_CRITICAL = 0x3 

REG_EXPAND_SZ          = 0x00020000 
REG_DWORD              = 0x00010001 
REG_MULTI_SZ           = 0x00010000
REG_BINARY             = 0x00000001
REG_SZ                 = 0x00000000
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.99