1. presenter_connection_zipped.exe Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (presenter_connection_zipped.exe)

These are the instructions for using the Logitech® Presenter Connection Software to connect a Logitech presenter
to its receiver on a Windows PC.  This software is only necessary if your presenter has lost connection to its
receiver or if you have a replacement receiver.  The software doesn’t change the functionality of your presenter
in any way.

The Logitech® Presenter Connection Software can be used to connect the following products:

- Logitech® Professional Presenter R800
- Logitech® Wireless Presenter R400

Steps to connect:

1.  Download the Logitech® Presenter Connection Software at www.logitech.com/support and save it to a folder.  Double-click
the file “presenter_connection_zipped.exe” and browse to a folder where you would like to save the unzipped software.  
Now your software is ready to go. 
2.  Turn the presenter On to verify that the batteries have enough power, then turn the presenter Off.
3.  Plug the presenter’s USB mini receiver into the computer's USB port.
4.  Start the Logitech® Presenter Connection software by double-clicking on the file “logitech_presenter_connection.exe”
(this is in the folder from step 1 above).
5.  Hold down the slide forward and slide backward keys (the two arrows) at the same time.
6.  While still holding both buttons down, turn the presenter On. Keep holding both buttons down for 3 - 5 seconds,
then release them.
7.  Click OK to exit the software.

Your presenter should now be connected.

If for some reason this does not work, please try plugging the receiver into a different USB port and perform these
steps 2 more times. If it fails to reconnect, please contact customer support for assistance.