[Startup] AppName=JMicron JMB38X Flash Media Controller ProductGUID=26604C7E-A313-4D12-867F-7C6E7820BE4C CompanyName=JMicron Technology Corp. ErrorReportURL=http://www.installshield.com/isetup/ProErrorCentral.asp?ErrorCode=%d : 0x%x&ErrorInfo=%s MediaFormat=0 LogMode=1 Skin=setup.isn Resource=_Setup.dll SmallProgress=N SplashTime=5 CheckMD5=Y CmdLine= ShowPasswordDialog=N EngineVersion=11.0.0.28844 EngineBinding=1 [Languages] Default=0x0009 count=10 key0=0x0804 key1=0x0404 key2=0x0009 key3=0x040c key4=0x0007 key5=0x0010 key6=0x0011 key7=0x0012 key8=0x0019 key9=0x000a RequireExactLangMatch=0x0804,0x0404 [Install_Setting] ;Customize INF file name InfName=jmcr_jm.inf ;Customize INF file name for support SDIO card SupportSDIOInfName=jmcr_sda.inf ;Customize the default value of "SupportSDIOCard", "0" indicate NOT support DefaultSupportSDIOCard=0 ;Customize to show the dialog for user to select "SupportSDIOCard", "0" indicate NOT show ShowSelectSDIODialog=0 ; If SupportDriverPreInstall = 1, indicate that "support driver preinstall" (but only valid for WHQL driver). Otherwise, indicate NOT support. SupportDriverPreInstall=0 ; If RebootNotRequiredAfterSetupDriver = 1, indicate that "Reboot is NOT required after driver setup". Otherwise, reboot is required. RebootNotRequiredAfterSetupDriver=1 ; if WaitDiskDriverInstall=1, indicate that the driver and setup program will wait until Disk driver is installed ready WaitDiskDriverInstall=0 ; CustomizedSettingCount indicate "the total number of CustomizedSetting". CustomizedSettingCount=12 ; [CustomizedSettings Definition] ; CustomizedSetting1: Customized Setting Flag. Bit Defintion would be appened later ; CustomizedSetting2: LED Pulse Width. DWord value. ; CustomizedSetting3: SD/MMC Slot A Pull-High/Pull-Low Setting ; CustomizedSetting4: SD/MMC Slot B Pull-High/Pull-Low Setting ; CustomizedSetting5: MS Slot A Pull-High/Pull-Low Setting ; CustomizedSetting6: MS Slot B Pull-High/Pull-Low Setting ; CustomizedSetting7: XD Pull-High/Pull-Low Setting ; CustomizedSetting8: SD/MMC Timing Delay Setting ; CustomizedSetting9: MS Timing Delay Setting ; CustomizedSetting10: IC Driving Setting ; CustomizedSetting11: D3E Waiting Minutes (Max 65535) ; CustomizedSetting12: Wait Disk Driver Ready Time ; [CustomizedSetting1 Bit Definition] ; Bit[ 1] (0x00000002): Set JMicron Disk Drive Icons ; Bit[ 4] (0x00000010): Enhance xD Write Performance ; Bit[ 5] (0x00000020): Support D3E // Need BIOS Supporting ; Bit[11] (0x00000800): Report All Disk to install disk driver when install JM 38X driver ; Bit[14] (0x00004000): Do not modify the Controller Capabilities Reported by BIOS ; Bit[15] (0x00008000): Report Host Caps with DockDevice to make Controller not show in "Safely Remove" list CustomizedSetting1=0x02101032 CustomizedSetting2=0x4000 CustomizedSetting3=0x50800F1F CustomizedSetting4=0x00000F1F CustomizedSetting5=0x5f8f0000 CustomizedSetting6=0x0f0f0000 CustomizedSetting7=0x4F8F1030 CustomizedSetting8=0x000337a3 CustomizedSetting9=0x00004000 CustomizedSetting10=0x01020101 CustomizedSetting11=0x00000006 CustomizedSetting12=0x0000000FDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.