Release note.txt Driver File Contents (Camera_U.zip)

======================================================================================================
Date 		: 2007/05/10/17:33
Driver Name	: BisonCamInstall-D(0705101733)-V(6.32.64.703.2)_clevo_uvc1300_vista3264_test
Version	: 6.32.64.703.2
note		: 
=======================================================================================================
Date 		: 2007/05/16/17:55
Driver Name	: BisonCamInstall-D(0705161755)-V(6.32.64.703.2)_clevo_uvc1300_vista3264_test
Version	: 6.32.64.703.2
note		: fix ap action and error message
=======================================================================================================
Date 		: 2007/05/18/15:51
Driver Name	: BisonCamInstall-D(0705181551)-V(6.32.64.703.2)_clevo_uvc1300_vista3264_test
Version	: 6.32.64.703.2
note		: fix can't preview
=======================================================================================================
Date 		: 2007/05/24/14:38
Driver Name	: BisonCamInstall-D(0705241438)-V(6.32.64.703.2)_clevo_uvc1300_vista3264_test
Version	: 6.32.64.703.2
note		: 
=======================================================================================================
Date 		: 2007/06/07/18:42
Driver Name	: BisonCamInstall-D(0706071842)-V(6.32.64.703.2)_clevo_uvc1300_vista3264_test
Version	: 6.32.64.703.2
note		: 
=======================================================================================================
Date 		: 2007/06/12/18:00
Driver Name	: BisonCamInstall-D(0706121800)-V(6.32.64.703.2)_clevo_uvc1300_vista3264_test
Version	: 6.32.64.703.2
note		: 
=======================================================================================================
Date 		: 2007/06/21/11:43
Driver Name	: BisonCamInstall-D(0706211143)-V(6.32.64.703.2)_clevo_uvc_common_vista3264_test
Version	: 6.96.704.2
note		: 
=======================================================================================================
Date 		: 2007/06/22/18:54
Driver Name	: BisonCamInstall-D(0706221854)-V(6.96.704.2)_clevo_uvc_common_vista3264_test
Version	: 6.96.704.2
note		: 
=======================================================================================================
Date 		: 2007/06/23/11:51
Driver Name	: BisonCamInstall-D(0706231151)-V(6.96.704.2)_clevo_uvc_common_vista3264_test
Version	: 6.96.704.2
note		: 
=======================================================================================================
Date 		: 2007/06/26/17:46
Driver Name	: BisonCamInstall-D(0706261746)-V(6.96.704.2)_clevo_uvc_common_vista3264_test
Version	: 6.96.704.2
note		: fix uac and add size 1680x1050
=======================================================================================================
Date 		: 2007/06/29/14:01
Driver Name	: BisonCamInstall-D(0706291401)-V(6.96.704.2)_clevo_uvc_common_vista3264_test
Version	: 6.96.704.2
note		: fix uac 
=======================================================================================================
Date 		: 2007/07/04/15:56
Driver Name	: BisonCamInstall-D(0707041556)-V(6.96.704.2)_clevo_uvc_common_vista3264_whql
Version	: 6.96.704.2
note		: pass WHQL
=======================================================================================================
Date 		: 2007/07/11/16:41
Driver Name	: BisonCamInstall-D(0707111641)-V(6.96.704.2.1)_clevo_uvc_common_vista3264_whql
Version	: 6.96.704.2.1
note		: ap will close when into s3s4 from clevo's request ;fix 2m snap issue with format 1680x1050
=======================================================================================================
Date 		: 2007/07/13/11:02
Driver Name	: BisonCamInstall-D(0707131102)-V(6.96.704.2.3)_clevo_uvc_common_vista3264_whql
Version	: 6.96.704.2.3
note		: make ap can only open once
=======================================================================================================
Date 		: 2007/07/25/19:32
Driver Name	: BisonCamInstall-D(0707251932)-V(6.96.704.2.5)_clevo_uvc_common_vista3264_whql
Version	: 6.96.704.2.5
note		: fix s3 white screen & find new hardware issue 
=======================================================================================================
Date 		: 2007/07/27/20:01
Driver Name	: BisonCamInstall-D(0707272001)-V(6.96.704.2.7)_clevo_uvc_common_vista3264_whql
Version	: 6.96.704.2.7
note		: fix preview lag when dc mode
=======================================================================================================
Date 		: 2007/07/30/20:54
Driver Name	: BisonCamInstall-D(0707302054)-V(6.96.704.2.9)_clevo_uvc_common_vista3264_whql
Version	: 6.96.704.2.9
note		: fix platform will hang up when into s3 on xp
=======================================================================================================
BisonCamInstall-D(0708252244)-V(6.96.704.2.11)_clevo_uvc_common_vista3264_close_ap
Date 		: 2007/08/25/22:44
Version	: 6.96.704.2.11
note		: Update system file for 4AA+5607 & 4B1+5607
		  For 4AA+5607, this driver should used on non VIA NB.
		  For 4B1+5607, this driver can fix preview issue by change format to YUY2.
		  XP 32 bit support CPU sleep status.
=======================================================================================================
BisonCamInstall-D(0708252250)-V(6.96.704.2.13)_clevo_uvc_common_vista3264_VIA_close_ap
Date 		: 2007/08/25/22:50
Version	: 6.96.704.2.13
note		: Update system file for 4AA+5607 & 4B1+5607.
		  For 4AA+5607, this driver should used on VIA NB.
		  And it can fix preview lag issue on VIA NB & jumping blue piexl issue if background is black.
		  For 4B1+5607, this driver can fix preview issue by change format to YUY2.
		  XP 32 bit support CPU sleep status.
=======================================================================================================
BisonCamInstall-D(0708291701)-V(6.96.704.2.15)_clevo_uvc_common_vista3264_close_ap
Date 		: 2007/08/29/17:01
Version	: 6.96.704.2.15
note		: To fix driver install issue on Vista 64, we add one lose file bisonr67.dll.
=======================================================================================================
BisonCamInstall-D(0708312149)-V(6.96.704.2.17)_clevo_uvc_common_vista3264_close_ap
Date 		: 2007/08/31/21:49
Version	: 6.96.704.2.17
note		: Update system file to fix capture issue.
=======================================================================================================
BisonCamInstall-D(0708312159)-V(6.96.704.2.19)_clevo_uvc_common_vista3264_VIA_close_ap
Date 		: 2007/08/31/21:59
Version	: 6.96.704.2.19
note		: Update system file to fix capture issue.
=======================================================================================================
BisonCamInstall-D(0709062219)-V(6.96.704.2.21)_clevo_uvc_common_vista3264_close_ap
Date 		: 2007/09/06/22:19
Version	: 6.96.704.2.21
note		: Update system file for 4AA+5607 to fix cross line issue.
=======================================================================================================
BisonCamInstall-D(0709072159)-V(6.96.704.2.23)_clevo_uvc_common_vista3264_VIA_close_ap
Date 		: 2007/09/07/21:59
Version	: 6.96.704.2.23
note		: Update system file with new link for 4AA+5607 to fix cross line issue by check package.
=======================================================================================================
BisonCamInstall-D(0709102219)-V(6.96.704.2.25)_clevo_uvc_common_vista3264_close_ap
Date 		: 2007/09/10/22:19
Version	: 6.96.704.2.25
note		: Update system file for PT80V(UMPC) with 20 fps setting in VGA.
		  Off RGB24 format for PT80V(UMPC).
=======================================================================================================
BisonCamInstall-D(0709102226)-V(6.96.704.2.27)_clevo_uvc_common_vista3264_VIA_close_ap
Date 		: 2007/09/10/22:26
Version	: 6.96.704.2.27
note		: Update system file for PT80V(UMPC) with 20 fps setting in VGA.
		  Off RGB24 format for PT80V(UMPC).
=======================================================================================================
BisonCamInstall-D(0709112023)-V(6.96.704.2.29)_clevo_uvc_common_vista3264_PT80V_close_ap
Date 		: 2007/09/11/20:23
Version	: 6.96.704.2.29
note		: Update image size for PT80V.
		  Add I420 format for PT80V.
		  Update preview application without Zomm function.
=======================================================================================================
BisonCamInstall-D(0709122127)-V(6.96.704.2.23)_clevo_uvc_common_vista3264_VIA_close_ap_WHQL
Date 		: 2007/09/12/21:27
Version	: 6.96.704.2.23
note		: Get WHQL for 4AA+5607.
		  Use RGB24 as default format by change preview setting.
=======================================================================================================
BisonCamInstall-D(0709131045)-V(6.96.704.2.29)_clevo_uvc_common_vista3264_PT80V_close_ap_WHQL
Date 		: 2007/09/13/10:45
Version	: 6.96.704.2.29
note		: Get logo for 6.96.704.2.29.
=======================================================================================================
BisonCamInstall-D(0709142354)-V(6.96.704.3.1)_clevo_uvc_common_vista3264_WHQL_close_ap
Date 		: 2007/09/14/23:54
Version	: 6.96.704.3.1
Project		: D900C/M570RU	(NON-VIA	RGB24 as default	AP auto close while S3/S4)
note		: Get logo for 6.96.704.2.21.
		  Update preview application without "Save Capture Video as" & TIME LIMIT.
=======================================================================================================
BisonCamInstall-D(0709291212)-V(6.96.704.3.9)_clevo_uvc_common_vista3264
Date 		: 2007/09/29/12:12
Version	: 6.96.704.3.9
Project		: D900C/M570RU	(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU	(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 	(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 	(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
note		: Update new TSR for snapshot function(cannot take a picture after long time burning test).
		  Update 2M driver with shorter waiting time before into selective suspend.
		  Fix install driver issue after plug-in device in Vista Home Basic 32 bit OS.
		  Add multi-language in user interface.
		  Update OEM.ini with new function : [Preview]
						     ZoomIn_Out=yes			yes  : preview application with zoom in/zoom out function.
											no   : preview application without zoom in/zoom out function.
						     Close_AP_BeforeSleep=no		yes  : preview application will auto close before into S3/S4.
											no   : preview application won't auto close before into S3/S4.
						     DefaultFormat_YUY2_RGB24=yuy2	yuy2 : preview application will use YUY2 as default format.
											rgb24: preview application will use RGB24 as default format.

						     [PowerSaving]
						     SelectiveSuspend=yes		yes  : support selective suspend.
											no   : not support selective suspend.
=======================================================================================================
BisonCamInstall-D(0710031150)-V(6.96.704.3.12)_clevo_uvc
Date 		: 2007/10/03/11:50
Version	: 6.96.704.3.12
Project		: D900C/M570RU	(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU	(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 	(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 	(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
note		: Update new TSR for snapshot function(cannot take a picture after install TV Tuner's driver).
		  Fix error message after finish installation.
		  Fix OEM.ini function : DefaultFormat_YUY2_RGB24.
=======================================================================================================
BisonCamInstall-D(0710252247)-V(6.96.704.3.15)_clevo_uvc
Date 		: 2007/10/25/22:47
Version	: 6.96.704.3.15
Project		: D900C/M570RU	(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU	(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 	(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 	(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
note		: Update new TSR for c3 issue.
		  Fix install issue if plug in device after install driver.
=======================================================================================================
BisonCamInstall-D(0711051703)-V(6.96.704.3.16)_clevo_uvc
Date 		: 2007/11/05/17:03
Version	: 6.96.704.3.16
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update 32/64 bit driver with newest link to fix S3/S4 & Fn+F10 blue screen issue & blurred screen issue & DTM test issue.
		  Update new preview application to fix black or white screen issue.
		  Update TSR for Zoom in/out display string issue.
		  Combin non-VIA & VIA & PT80V in same driver by change flag in OEM.ini : 
			[Module]
			1.3M_OR_2M=1.3m		//set 2M if camera module is 2M

			[Platform]
			Is_VIA=no		//set yes if platform is VIA
			Is_PT80V=no		//set yes if platform is PT80V
=======================================================================================================
BisonCamInstall-D(0711141742)-V(6.96.704.3.17)_clevo_uvc
Date 		: 2007/11/14/17:42
Version	: 6.96.704.3.17
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update new preview application to fix write screen issue before move mouse.
		  Del "1.3M_OR_2M" in OEM.ini and auto detect 1.3M or 2M.
=======================================================================================================
BisonCamInstall-D(0711262152)-V(6.96.704.4.1)_clevo_uvc_WHQL
Date 		: 2007/11/26/21:52
Version	: 6.96.704.4.1
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Get logo from 6.96.704.3.17.
=======================================================================================================
BisonCamInstall-D(0711271851)-V(6.96.704.4.2)_clevo_uvc_WHQL
Date 		: 2007/11/27/18:51
Version	: 6.96.704.4.2
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Add manifest on exe file which is used to install camera driver after plug-in device.
=======================================================================================================
BisonCamInstall-D(0711301918)-V(6.96.704.4.3)_clevo_uvc_WHQL
Date 		: 2007/11/30/19:18
Version	: 6.96.704.4.3
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update preview application with retry 5 sec setting.
=======================================================================================================
BisonCamInstall-D(0712061430)-V(6.96.704.4.4)_clevo_uvc_WHQL
Date 		: 2007/12/06/14:30
Version	: 6.96.704.4.4
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update "BisonHK.exe" to fix auto close issue.
		  Update preview application retry 5 sec after power off device.
=======================================================================================================
BisonCamInstall-D(0712062323)-V(6.96.704.4.5)_clevo_uvc_WHQL
Date 		: 2007/12/06/23:23
Version	: 6.96.704.4.5
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Add new PowerSaving flag : Powerdown, to open powerdownwhenunopen powersaving function.
=======================================================================================================
BisonCamInstall-D(0712072138)-V(6.96.704.4.6)_clevo_uvc_WHQL
Date 		: 2007/12/07/21:38
Version	: 6.96.704.4.6
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update BisonHK.exe for take picture & zoom function.
		  Update preview application to show error message in 1 sec after press Fn+F10 during previewing.
=======================================================================================================
BisonCamInstall-D(0712081719)-V(6.96.704.4.7)_clevo_uvc_WHQL
Date 		: 2007/12/08/17:19
Version	: 6.96.704.4.7
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update preview application to shorten the ap preview image time.
		  Update preview application to show error message in 1 sec after press Fn+F10 during previewing.
=======================================================================================================
BisonCamInstall-D(0712111512)-V(6.96.704.4.8)_clevo_uvc_WHQL
Date 		: 2007/12/11/15:12
Version	: 6.96.704.4.8
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Auto reboot after install & uninstall.
=======================================================================================================
BisonCamInstall-D(0712111908)-V(6.96.704.4.9)_clevo_uvc
Date 		: 2007/12/11/19:08
Version	: 6.96.704.4.9
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update 2M driver to change sensor settings.
=======================================================================================================
BisonCamInstall-D(0712121559)-V(6.96.704.4.10)_clevo_uvc_WHQL
Date 		: 2007/12/12/15:59
Version	: 6.96.704.4.10
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Close preview application before uninstall.
		  Add "Close_App_ScanCode" in OEM.ini.
=======================================================================================================
BisonCamInstall-D(0712202006)-V(6.96.704.4.11)_clevo_uvc_WHQL
Date 		: 2007/12/20/20:06
Version	: 6.96.704.4.11
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update preview application to fix "Capture application stop working" issue.
		  Add Is_ThirdParty_Chipset in OEM.ini.
=======================================================================================================
BisonCamInstall-D(0801030244)-V(6.96.704.4.12)_clevo_uvc
Date 		: 2008/01/03/02:44
Version	: 6.96.704.4.12
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update 2M driver with 30 fps.
		  Update new preview application which will show a message if camera is being used by another application.
=======================================================================================================
BisonCamInstall-D(0801211415)-V(6.96.704.4.13)_clevo_uvc
Date 		: 2008/01/21/14:15
Version	: 6.96.704.4.13
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update 2M 32 bit driver for bad piexl issue.
=======================================================================================================
BisonCamInstall-D(0801242216)-V(6.96.704.4.14)_clevo_uvc
Date 		: 2008/01/24/22:16
Version	: 6.96.704.4.14
Project		: D900C/M570RU		(NON-VIA	RGB24 as default	AP auto close while S3/S4)
		  D900C/M570RU		(NON-VIA	RGB24 as default	AP won't auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP auto close while S3/S4)
		  M72S/R/M54JE 		(NON-VIA	YUY2 as default 	AP won't auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP auto close while S3/S4)
		  M54SE/M66SE/M67SI 	(VIA		YUY2 as default 	AP won't auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP auto close while S3/S4)
		  TP80V 		(VIA		YUY2 as default 	AP won't auto close while S3/S4)

note		: Update 2M driver for new VID_PID.
=======================================================================================================
BisonCamInstall-D(0802212053)-V(6.96.704.5.1)_clevo_uvc-WHQL
Date 		: 2008/02/21/20:53
Version		: 6.96.704.5.1
note		: Get WHQL logo from  6.96.704.4.14
		  Update preview application which will preview in 640*480 size.
                  Update preview application to fix AP position.
		  Update preview application to support Brz. Port.
=======================================================================================================
BisonCamInstall-D(0802251939)-V(6.96.704.5.2)_clevo_uvc-WHQL
Date 		: 2008/02/22/19:39
Version		: 6.96.704.5.2
note		: Update preview application to fix default format issue.
=======================================================================================================
BisonCamInstall-D(0803041827)-V(6.96.704.5.3)_clevo_uvc-WHQL
Date 		: 2008/03/04/18:27
Version		: 6.96.704.5.3
note		: Update preview application to fix non error msg while HDD full & recording file ending error.
=======================================================================================================
BisonCamInstall-D(0803062052)-V(6.96.704.5.4)_clevo_uvc-WHQL
Date 		: 2008/03/06/20:52
Version		: 6.96.704.5.4
note		: Update preview application for new function : recording in 640*480 mode if preview size is bigger than 640*480.
=======================================================================================================
BisonCamInstall-D(0803131441)-V(6.96.704.5.5)_clevo_uvc
Date 		: 2008/03/13/14:41
Version		: 6.96.704.5.5
note		: Update driver for 4b1+5607 blue piexl issue in hot temperature.
=======================================================================================================
BisonCamInstall-D(0803201949)-V(6.96.704.5.6)_clevo_uvc
Date 		: 2008/03/20/19:49
Version		: 6.96.704.5.6
note		: Update preview application for recording function.
=======================================================================================================
BisonCamInstall-D(0803252042)-V(6.96.704.5.7)_clevo_uvc
Date 		: 2008/03/25/20:42
Version		: 6.96.704.5.7
note		: Update "BisonHK.exe & DLL" to fix hot key no function issue.
=======================================================================================================
BisonCamInstall-D(0804021058)-V(6.96.704.6.1)_clevo_uvc_WHQL
Date 		: 2008/04/02/10:58
Version		: 6.96.704.6.1
note		: Update logo driver from ver6.96.704.5.7.
=======================================================================================================
BisonCamInstall-D(0804221954)-V(6.96.704.6.2)_clevo_uvc_WHQL
Date 		: 2008/04/22/19:54
Version		: 6.96.704.6.2
note		: Update OEM.ini.
		  Update preview application for prompt message.
=======================================================================================================
BisonCamInstall-D(0804242204)-V(6.96.704.6.3)_clevo_uvc_WHQL
Date 		: 2008/04/24/22:04
Version		: 6.96.704.6.3
note		: Update preview application to fix can't preview issue if unplug device while previewing
		  by check reg flag..
=======================================================================================================
BisonCamInstall-D(0804251756)-V(6.96.704.6.4)_clevo_uvc_WHQL
Date 		: 2008/04/25/17:56
Version		: 6.96.704.6.4
note		: Update preview application to hide additional function "pixel_correction".
=======================================================================================================
BisonCamInstall-D(0804301906)-V(6.96.704.6.5)_clevo_uvc
Date 		: 2008/04/30/19:06
Version		: 6.96.704.6.5
note		: Update 32/64 bit driver of 2M to fix WIA preview size issue.
=======================================================================================================
BisonCamInstall-D(0805061611)-V(6.96.704.7.1)_clevo_uvc-WHQL
Date 		: 2008/05/06/16:11
Version		: 6.96.704.7.1
note		: Update 32/64 bit driver of 2M & pass WHQL logo.
=======================================================================================================
BisonCamInstall-D(0805172133)-V(6.96.704.6.6)_clevo_uvc
Date 		: 2008/05/17/21:33
Version		: 6.96.704.6.6
note		: Update 32/64 bit test driver for high temperature noise issue.
=======================================================================================================
BisonCamInstall-D(0805272036)-V(6.96.704.8.1)_clevo_uvc-WHQL
Date 		: 2008/05/27/20:36
Version		: 6.96.704.8.1
note		: Update 32/64 bit logo driver of 2M from ver6.96.704.6.6.
=======================================================================================================
BisonCamInstall-D(0807112113)-V(6.96.704.8.2)_clevo_uvc-WHQL
Date 		: 2008/07/11/21:13
Version		: 6.96.704.8.2
note		: Update preview application to fix preview issue if playing in large size with projector.
		  Update preview application which will not show TV Tuner in device list.
		  Update preview application to fix garbage issue while image initial.
=======================================================================================================
BisonCamInstall-D(0807241740)-V(6.96.704.8.3)_clevo_uvc-WHQL
Date 		: 2008/07/24/17:40
Version		: 6.96.704.8.3
note		: Update preview application to fix APClose issue.
=======================================================================================================
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.83