SMPWEBCAM.exe Date : 2010/09/14/14:06 Version : 6.2.11.010730 note : 1. save file path to short ,can't append vice-file name. 2. When record file , when device plug out , can't stop record. ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2010/09/07/14:41 Version : 6.2.11.010730 note : 1. WHQL Version. ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2010/08/20/18:38 Version : 6.2.11.010730 note : 1. Fix SMP VideoCap to V1.27.0.12. ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2010/08/18/17:17 Version : 6.2.11.010730 note : 1. Fix 64bit system install issue. ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2010/08/10/18:04 Version : 6.2.11.010730 note : 1. SMP full packet driver 2. Add for SMP 9016 WB(RGB)/EXPOSURE special control property page saving 3. Fix 9016 ISP RGB initial error cause AWB error issue(2010/08/09),for customer request not modify driver version ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2010/08/06/14:25 Version : 6.2.11.010730 note : 1. Fix silent install issue. ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2010/07/30/15:40 Version : 6.2.11.010730 note : 1. SMP full packet driver 2. Add for SMP 9016 WB(RGB)/EXPOSURE special control property page saving 3. Fix SMP VideoCap to V1.27.0.10 a. Open SMP 9016(CLevo) Zoom in/out b. For SMP 9016(CLevo) open stream enter S3 issues ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2010/03/25/16:09 Version : 1.4.7.010325 note : 1.Fix SMP VideoCap to V1.26.0.27 ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2010/02/10/18:57 Version : 1.4.7.010210 note : 1.Fix Alluser account issue ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/08/19/11:08 Version : 1.4.7.000819 note : 1.Fix VideoCap menu display garbled on Win7 ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/08/11/18:08 Version : 1.4.7.000811 note : 1.WHQL version ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/07/23/14:16 Version : 1.4.7.000723 note : 1.Modify Show_ShortcutAP switch is used to show the shortcut on both desktop and taskbar 2.AP preview window maximum box property setting to enable. 3.AP preview window resize property setting to enable. 4.Add Zoom in & out function on AP menu. ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/07/20/14:26 Version : 1.4.7.000720 note : 1.AP preview window maximum box property setting to false. => ½Ð±Nmaximum box³]¦¨¦Ç¶¥µLªk°õ¦æ³Ì¤j¤Æ 2.AP preview window resize property setting to false. => VGA¥H¤Uªº¦Uresolution¤§©ì¦²preview window¬Òdisable 3.Delete Zoom in & out function on AP menu. => ½Ð±NAP UI Zoom in & out icon §R°£but filter driver still keep ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/07/08/12:36 Version : 1.4.7.000708 note : 1. Fix normal install didn't ask reboot ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/07/06/16:01 Version : 1.4.7.000706 note : 1. Support silent uninstall ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/06/29/22:47 Version : 1.4.7.00629 note : 1. Update driver cam3820a.sys version "6.1.30.0" a) Fix DTM logo issue b) Fix IO_Remove_Lock issue in Win7 c) Fix timing issue for interrupt pipe urb complete routine 2. Update INF file cam3820.inf version "06/24/2009,6.1.30.0" a) Modify hardware ID to install driver by composite device mode. Only avalible in Vista and Win7 3. Update installation program uvcinstap.exe version "2.0.0.0" a) Modify setup program to install driver by composite device mode. 4. Add daemon window service "detectdev.exe" version "1.0.0.0" a) This service program will detect device arrival event and install vendor driver. ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/06/16/06:00 Version : 1.4.5.70616 note : 1.internal OEM.ini "write-protect" disable,become VSS check out always enable "write-protect" ======================================================================================================= ======================================================================================================= UvcVideoCamera_v1.4.5.40423_SMP_9016.exe Date : 2009/04/23/17:06 Versiion : 1.4.5.404231 note : 1.add batch file for lanuching Silent mode 2.UPDATE OEM.ini for Zoom in/out function. Set "ZoomIn_Out=yes",function on. Set "ZoomIn_Out=no",function off. 3.Add OEM.ini for Show_ShortcutAP function. Set "Show_ShortcutAP=yes",destop ShortCut will generate. Set "Show_ShortcutAP=no",destop ShortCut will not generate. 4.multi propertypage ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/04/29/11:54 Versiion : 1.4.5.50429 note : 1.Rename "UvcVideoCamera" as "SMPWEBCAM" 2.ADD Launch AP Setup.exe a.Standard Install command "SMPWEBCAM.exe" b.Silent Install command "SMPWEBCAM.exe /s" 3.Update UVCSti ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/05/07/08:33 Versiion : 1.4.5.60507 note : 1.Rename insatll folder "SMP Webcam" ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/05/18/07:35 Versiion : 1.4.5.70518 note : Release note: [Driver] Date: 2009.05.15 FileName: cam3820a.sys FilePath: mail attach file Verson: v 6.1.28.0 Major changed: 1.modify ZoomScale is 0.01 [PropertyPage] Date: 2009.05.15 FileName: ACamPropertyPage.ax FilePath: mail attach file Verson: v 1.0.0.3 Major changed: 1.modify ZoomScale default is 100 [VideoCap] Date: 2009.05.15 FileName: VideoCap.exe FilePath: http://tascserver/bugtracking/file_download.php?file_id=589&type=bug Verson: v1.26.1.9 Major changed: 1.modify ZoomScale is 0.01 and Zoom behavior copy BISON AP. ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/05/21/05:10 Versiion : 1.4.5.70521 note : Release note: Folder name change from"VideoCap" to "SMPVideoCap" ======================================================================================================= ======================================================================================================= SMPWEBCAM.exe Date : 2009/06/01/01:30 Versiion : 1.4.5.70527 note : Release Node : VideoCap Release Node [VideoCap_v1.26.1.13_Clevo] Date: 2009.06.01 Verson: v1.26.1.13 AppPath: http://tascserver/bugtracking/file_download.php?file_id=622&type=bug Major changed: 1. Resolution setting is greater than 640x480, the resolution of preview window is fixed at 640x480. 2. Change save still image , YUV2RGB range 0~255 3. VideoCap.ini Add new item AppName to dispaly AP title [cam3820.inf] remove pid&vid as below VID_058F&PID_3820 VID_058F&PID_3821 VID_058F&PID_3822 VID_058F&PID_3823 VID_058F&PID_3824 VID_058F&PID_3825 VID_058F&PID_3830 VID_058F&PID_3831 VID_058F&PID_0388 VID_058F&PID_188D VID_058F&PID_1688 VID_058F&PID_118B VID_058F&PID_198B VID_058F&PID_6130 VID_18E3&PID_9508 VID_058F&PID_3871 VID_058F&PID_3872 VID_058F&PID_3873 VID_058F&PID_3874 VID_058F&PID_3881 VID_10F1&PID_1A12 VID_0813&PID_000C ======================================================================================================= =======================================================================================================Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.