readme.txt Driver File Contents (11110v13.exe)

README.TXT                                                     01-13-2003 CDC
Flash BIOS version 1.30 for Satellite 1110-S153
=============================================================================

This BIOS is applicable to the following models:

Satellite 1110-S153
Satellite 1115-S103
Satellite 1115-S104

For purposes of this document, the term "Satellite 1110-S153"
is used to generically refer to all of the models listed above.
=============================================================================

This archive contains the following files:

README.TXT      Installation/usage instructions in ASCII text format
README.COM      Self-displaying version of installation/usage instructions
1372D13.EXE     Self-extracting diskette image of BIOS install diskette
INSTINFO.BAT    DOS batch file that creates install disk and displays README
                file
11110v13.iso    ISO Image of bootable BIOS Installation CD-ROM
                See instructions below regarding the use of this image


This BIOS version is Windows XP compatible and supports Plug and Play, and 
ACPI functionality.

********************************** CAUTION! *********************************
*****************************************************************************

During the upgrading of your computers BIOS, if the computer loses power or
fails to complete the process of upgrading the BIOS, the existing BIOS in
the computer may become damaged.

It is recommended that all PCMCIA cards be removed from the system prior to
upgrading the BIOS.  Also advisable is disconnecting any connected printers,
scanners, external mice, or other connected devices.


******************** BIOS INSTALLATION INSTRUCTIONS *************************
*****************************************************************************

This release of the electronic distribution BIOS utilizes a self-extracting
ZIP file that, when run under Windows or Win-OS2, creates a bootable BIOS
installation diskette.

Since you're reading this, you were obviously able to extract the downloaded
file.  If you also created the BIOS installation diskette as a part of the
extraction process, you're ready to follow the installation instructions
below.

If you didn't create the installation diskette during the extraction phase,
or if you extracted the downloaded file with PKUnZip or WinZip, you can
create the installation diskette by executing the INSTINFO program from the
DOS command prompt.

Install this BIOS using the following steps:

WINDOWS 3.x:

      o Close all open programs
      o From Program Manager, click on File/Exit Windows
        Windows exits to a MS-DOS command prompt
      o Insert the BIOS installation diskette into your diskette drive (A:)
      o Press Ctrl-Alt-Del (press and hold the <Ctrl> and <Alt> keys and press
        the <Del> key) to restart the system

OTHER OPERATING SYSTEMS

      o Close all open programs
      o Shut down the operating system
      o Insert the BIOS installation diskette into your diskette drive (A:)
      o Restart the computer by pressing Ctrl-Alt-Del or turning the computer
        OFF then on again

The computer will boot MS-DOS from the BIOS installation diskette, and
initiate the Flash BIOS installation routine.  When the Flash BIOS
installation is complete, the computer will reboot automatically.  When the
screen goes black after the BIOS installs, eject the BIOS installation
diskette.


ADDITIONAL INFORMATION REGARDING THIS RELEASE
---------------------------------------------

If you are unable to use the Windows self-extractor, the self-extracting
ZIP archive can be extracted by executing it from a DOS prompt or it can be
extracted using PKUNZIP 2.04G or an equivalent UnZIP utility.  A DOS batch
file, INSTINFO.BAT is provided in the ZIP archive which will create the BIOS
installation diskette.  If all else fails, you can execute the
self-extracting diskette image manually.  This file is named 1372D13.EXE , and
needs a parameter of A: (1372D13 A:) to successfully create the diskette in
drive A:

The self-extracting diskette image, 1372D13.EXE , will run under MS-DOS or a
command prompt under Windows 95/98, NT, or OS/2.  PLEASE NOTE that long
directory names in  the path where the self-extracting image file is stored
under Windows 9x or NT will cause the self-extracting image to abort.  Long
directory names are supported under OS/2.

If your Toshiba PC is equipped with a bootable CD-ROM device (CD-ROM,
DVD-ROM, DVD-RW, DVD-Multi, etc.), and you have access to a CD writer
(burner, either installed in your Toshiba PC or in another PC), you can
create a bootable BIOS installation CD-ROM using the ISO CD image,
11110v13.iso, provided in this distribution.  Once you create the bootable
CD-ROM, simply boot your computer from the resulting CD.

To boot from CD, you can either hold down the "C" key while you turn your
computer on, or you can use HWSetup to change the boot priority so the CD
drive boots before the HDD.

Note, if your CD burner supports it, you can use a rewritable CD (CD-RW) disc
to create the bootable BIOS installation CD-ROM.  Be sure to erase the 
rewritable disc (if it has data on it) before you proceed.  Once you are
finished updating your system's BIOS, you can erase and re-use the rewritable
disc.


CHANGE HISTORY
--------------

Version 1.30  01-07-2003
   o Added support for Toshiba LCD LTM14C506C 14.1" XGA.  This BIOS is
     backward compatible for all previous LCDs and must be used for this LCD.


Version 1.20  10-30-2002
   o Initial production BIOS for these models.




 **end**


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.84