*******************************************************************
* ACCTON TECHNOLOGY CORPORATION *
* EN1207F/EN2242/EN3207 SERIES FAST ETHERNET ADAPTER *
* NetWare Client32 Driver Installation Overview *
* *
* Copyright (C) 2002 Accton Technology Corporation *
* All rights reserved. *
*******************************************************************
Contents:
A. File Description
B. Driver Installation for NetWare Server 3.1x, 4.x
C. Driver Installation for DOS32
D. Driver Installation for Microsoft Windows 3.x
E. Driver Installation for Microsoft Windows 95
F. Parameter Description for ACCODI.LAN
A. File Description
--------------------
-------------------------------------------------------------------------------
Filename Description
-------------------------------------------------------------------------------
CLIENT32.TXT This file. Presents a summary of the contents for NetWare
Client32 driver installation.
EN5251.LAN Accton Client32 ODI driver for EN5251 Series Chip Based Fast
Ethernet adapter. This driver complies with NetWare ODI Server
driver SPEC 3.31.
EN5251.LDI The (EN5251.LAN) driver installation information file for
NetWare Server 4.X, NeDOS32, Windows 3.x.
EN5251.INF The (EN5251.LAN) driver installation information file for
Microsoft Windows 95.
-------------------------------------------------------------------------------
B. Driver (Spec. 3.31) Installation for NetWare Server 3.1x, 4.x
B.1 Driver Installation for NetWare Server 3.12
1. Insert Accton EN5251 Series Chip Based Fast Ethernet Adapter Driver
Diskette or CD-ROM .
2. Change to the NetWare Server directory (for example:
CD\SERVER.312)
3. Copy the following files from the Driver Diskette or CD-ROM to the NetWare
Server directory.
\NetWare\ODI\SERVER\3.12\NBI31X.NLM
\NetWare\ODI\SERVER\3.12\MSM31X.NLM
\NetWare\ODI\SERVER\ETHERTSM.NLM
\LANDRV32\EN5251.LAN
4. Sample AUTOEXEC.NCF for NetWare Server 3.12
AUTOEXEC.NCF
============
LOAD C:NBI31X
LOAD C:MSM31X
LOAD C:ETHERTSM
LOAD C:EN5251 FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:EN5251 FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:EN5251 FRAME=ETHERNET_II NAME=E_II
LOAD C:EN5251 FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
B.2 Driver Installation for NetWare Server 4.X
1. Change to the NetWare Server directory (for example:
CD\NWSERVER )
2. Load the NetWare Server System by typing SERVER, then press
<Enter>.
3. When the Server prompt appears, load the NetWare Server
Installation Utility. That is,
:LOAD INSTALL
4. Select "Driver options" from the "Installtion Options" menu,
then press <Enter>.
5. Select "Configure network drivers" from the "Driver Options"
menu, then press <Enter>.
6. Select "Select a driver" from the "Additional Driver Actions"
menu, then press <Enter>.
7. Press <Ins> to install a unlisted driver, then press <F3> to
specify a different path.
8. Insert Accton EN5251 Series Chip Based Fast Ethernet Adapter
Driver Diskette or CD-ROM and specify the drive path "X:\landrv32".
Notice: X: means the drive (Floppy or CD-ROM) containing the driver,
such as: A:, or D: etc.
9. Select "Accton EN5251 Series Chip Based Fast Ethernet Driver" from
the "Select a driver to installed:" menu, then press <Enter>.
10. If necessary, select "Select/Modify driver parameters and
protocols" from the "Board EN5251 (Driver EN5251) Actions"
menu, then press <Enter> to setup the driver parameters.
(Please refer to content G.) Otherwise, select
"Save parameters and load driver", then press <Enter>.
11. Following screen instructions to complete driver installation.
12. Sample AUTOEXEC.NCF for NetWare Server 4.X
AUTOEXEC.NCF (one board)
========================
LOAD C:NBI
LOAD C:MSM
LOAD C:ETHERTSM
LOAD C:EN5251 FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:EN5251 FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:EN5251 FRAME=ETHERNET_II NAME=E_II
LOAD C:EN5251 FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
AUTOEXEC.NCF (two boards)
=========================
LOAD C:NBI
LOAD C:MSM
LOAD C:ETHERTSM
LOAD C:EN5251 PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1
LOAD C:EN5251 PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1
LOAD C:EN5251 PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1
LOAD C:EN5251 PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1
LOAD C:EN5251 PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2
LOAD C:EN5251 PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2
LOAD C:EN5251 PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2
LOAD C:EN5251 PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2
BIND IPX E_8022_1 NET=10
BIND IPX E_8023_1 NET=20
BIND IPX E_II_1 NET=30
BIND IPX E_SNAP_1 NET=40
BIND IPX E_8022_2 NET=50
BIND IPX E_8023_2 NET=60
BIND IPX E_II_2 NET=70
BIND IPX E_SNAP_2 NET=80
C. Driver Installation for DOS32
1. If you have finished installing the NetWare Client 32 for DOS,
all you have to do is modify STARTNET.BAT. Please see the
sample STARTNET.BAT beneath these installation instructions.
2. Run INSTALL.EXE from NetWare DOS 32 diskette 1 (or from NetWare
4.11 CD). When the product manual appears, mark the "NetWare
Client 32 for DOS" item, then press <Enter>.
3. Select the "OTHER DRIVERS" item from the "32-bit Network Board
Drivers" menu, then press <Enter>.
4. Insert Accton's EN5251 Series Chip Based Driver Diskette or CD-ROM,
then specify the driver path, like X:\LANDRV32.
Notice: X: means the drive (Floppy or CD-ROM) containing the driver,
such as: A:, or D: etc.
5. Select "Accton EN5251 Series Chip Based Fast Ethernet Fast Ethernet
Driver", then press <Enter>.
6. Refer to Content G. and set the correct driver parameters to
comply with your network environment, then press <F10> to continue.
7. Following screen instructions to complete Client32 for DOS software
installation.
8. Reboot your machine.
Sample STARTNET.BAT for DOS32.
==============================
SET NWLANGUAGE=ENGLISH
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\EN5251.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\EN5251.LAN FRAME=ETHERNET_802.3
LOAD C:\NOVELL\CLIENT32\EN5251.LAN FRAME=ETHERNET_II
LOAD C:\NOVELL\CLIENT32\EN5251.LAN FRAME=ETHERNET_SNAP
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
NOTICE!! C:\NOVELL is the directory where your Novell Client 32
files are located.
D. Driver Installation for Microsoft Windows 3.x
Please refer to Content CD., in step 2, mark "NetWare Client 32
for DOS" and "Client 32 for Windows", then follow step 3...8
to complete installation.
E. Driver Installation for Microsoft Windows 95
If you have installed the Microsoft Client in your Windows 95
system, you should remove the adapter object and NDIS3 driver
for the EN5251 Based Fast Ethernet Adapter from the Windows 95
system.
1. Plug Accton EN5251 Series Chip Based Adapter into one of the Master PCI
slots of your PCI platform.
2. Turn the power ON, then boot from Windows 95.
3. Windows 95 will prompt with "PCI Ethernet Controller" in the
"New Hardware Found" dialog box.
4. Select "Driver from disk provided by hardware manufacturer"
from the "New Hardware Found" dialog box, then click the OK button.
5. Insert the Accton EN5251 Series Chip Based Adapter Driver Diskette or CD-ROM
6. Enter the driver pathname X:\LANDRV32, then click the OK button
in the "Install from Disk" dialog box.
Notice: X: means the drive (Floppy or CD-ROM) containing the driver,
such as: A:, or D: etc.
7. Follow the screen's prompt to insert the "NetWare Client 32 for
Windows 95" disk and click the OK button in the "Insert Disk"
dialog box.
8. Otherwise enter the full pathname for the "NetWare Client 32 for
Windows 95" installation files in the "Copying Files....." dialog
box, then click the OK button.
9. Follow the screen's prompt to insert the "Windows 95 CD-ROM"
and click the OK button in the "Insert Disk" dialog box.
10. Otherwise enter the full pathname of the "Windows 95 CD-ROM"
installation files in the "Copying Files..." dialog box,
then click the OK button.
11. Windows 95 will copy the driver (EN5251.LAN) from X:\LANDRV32
to the C:\NOVELL\CLIENT32 directory and the EN5251.INF file
from X:\LANDRV32 to the C:\WINDOWS\INF directory.
12. Remove the Accton EN5251 Based Driver Diskette or CD-ROM.
13. Restart your computer to initialize the network function.
NOTICE!! C:\NOVELL is the directory where your Novell Client 32
files are located.
C:\WINDOWS is the directory where your Windows 95 O.S.
is located.
X: means the drive (Floppy or CD-ROM) containing the driver,
such as: A:, or D: etc.
F. Parameter Description for EN5251.LAN
The following parameters are used in EN5251.LAN.
1. SLOT : specifies which adapter is enabled when multiple EN5251
Based adapters are found in your computer. The SLOT keyword
is an index value corresponding to PCI BIOS. The mapping
from SLOT to the physical PCI slot is different from one
machine to another.
Ex: LOAD EN5251 SLOT=3 FRAME=ETHERNET_802.2
LOAD EN5251 SLOT=4 FRAME=ETHERNET_II
2. FRAME : specifies which frame type is used by the driver. Accepted
values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
Ethernet_SNAP. Multiple frame types can be enabled by
loading the same driver with different FRAME types.
Ex: LOAD EN5251 FRAME=ETHERNET_802.2
LOAD EN5251 FRAME=ETHERNET_802.3
LOAD EN5251 FRAME=ETHERNET_II
LOAD EN5251 FRAME=ETHERNET_SNAP
3. NODE : Uses a different address to replace the node address burned
in EEPROM.
Ex: LOAD EN5251 NODE=0000E8001122
4. Media_Type : Specifies which medium type is used by the driver.
Accepted vaules are AUTO,10-HD,10-FD,100-HD,
100-FD.
Ex: LOAD EN5251 SLOT=3 FRAME=ETHERNET_802.2 Medium=100-FD
---
All trademarks and brand names mentioned belong to their
respective owners.
-- End of File --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.