Use the information file ( .inf) for Windows 95/98/2000/Me/XP or later Philips' monitors build in VESA DDC2B feature to support Plug & Play requirement for Windows 95/98/2000/Me/XP . You can install this information file ( .inf) in order to select your Philips monitor from "Monitor" dialog box in Windows 95/98/2000/Me/XP to activate Plug & Play application. The installation procedure based on Windows '95 OEM Release 2 , 98 , Me , 2000 and XP are specified as follows, For Windows 95 ============== 1. Start Windows '95 2. Click the 'Start' button, point to 'Setting', and then click 'Control Panel'. 3. Double Click the 'Display' Icon. 4. Choose the 'Settings' tab then click 'Advanced...' button. 5. Choose 'Monitor' button, point to 'Change...' then click 'Have Disk...' button. 6. Click 'Browse...' button then choose the appropriate drive F: ( CD-ROM Drive) then click 'OK' button. 7. Click the 'OK' button then choose your monitor model and click the 'OK'. 8. Click 'Close' button. For Windows 98 ============== 1. Start Windows 98 2. Click the 'Start' button, point to 'Setting', and then click 'Control Panel'. 3. Double Click the 'Display' Icon. 4. Choose the 'Settings' tab then click 'Advanced...' button. 5. Choose 'Monitor' button, point to 'Change...' then click 'Next' 6. Choose "Display a list of all the drivers in a specific location, so you can select the driver you want." then click 'Next' and then click 'Have Disk...' button. 7. Click 'Browse...' button then choose the appropriate drive F: ( CD-ROM Drive) then click 'OK' button. 8. Click the 'OK' button then choose your monitor model and click the 'Next' button then click 'Next' button. 9. Click 'Finish' button then the 'Close' button. For Windows Me ============== 1. Start Windows Me 2. Click the 'Start' button, point to 'Setting', and then click 'Control Panel'. 3. Double Click the 'Display' Icon. 4. Choose the 'Settings' tab then click 'Advanced...'. 5. Choose 'Monitor' button, then click 'Change...' button. 6. Choose "Specify the location of the driver(Advanced)" and click the 'Next' button. 7. Choose "Display a list of all the drivers in a specific location, so you can select the driver you want." then click 'Next' and then click 'Have Disk...' button. 8. Click 'Browse...' button then choose the appropriate drive F: ( CD-ROM Drive) then click 'OK' button. 9. Click the 'OK' button then choose your monitor model and click the 'Next' button then click 'Next' button. 10. Click 'Finish' button then the 'Close' button. For Windows 2000 ================ 1. Start Windows 2000 2. Click the 'Start' button, point to 'Setting', and then click 'Control Panel'. 3. Double Click the 'Display' Icon. 4. Choose the 'Settings' tab then click 'Advanced...'. 5. Choose 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click 'Properties' button. Please follow next step continually. 6. Click 'Driver' and then click on 'Update Driver...' then click on the 'Next' button. 7. Choose "Display a list of the known drivers for this device so that I can choose a specific driver" then click 'Next' and then click 'Have disk...'. 8. Click 'Browse...' button then choose the appropriate drive F: ( CD-ROM Drive). 9. Click the 'Open' button, then click the 'OK' button. 10. Choose your monitor model and click the 'Next' button then click 'Next' button. 11. Click 'Finish' button then the 'Close' button. If you can see the "Digital Signature Not Found" window then click the 'Yes' button. For Windows XP ================ 1. Start Windows XP 2. Click the 'Start' button and then click 'Control Panel'. 3. Pick and click the category 'Printers and Other Hardware' 4. Click the 'Display' Item. 5. Choose the 'Settings' tab then click 'Advanced' button. 6. Choose 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click 'Properties' button. Please follow next steps accordingly. 7. Click the 'Driver' tab and then click on 'Update Driver...' button. 8. Choose the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Choose the ' Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10. Click the 'Have disk...' button then click the 'Browse...' button. Then choose the appropriate drive F: ( CD-ROM Drive). 11. Click the 'Open' button, then click the 'OK' button. 12. Choose your monitor model and click the 'Next' button. - If you can see the 'has not passed Windows Logo testing to verify its compatibility with Windows XP' message please click the 'Continue Anyway' button. 13. Click 'Finish' button then the 'Close' button. 14. Click 'OK' button and then the 'OK' button again to close the Display Properties dialog box. If your Windows 95/98/2000/Me/XP version is different or you need more detailed installation information, please refer to Windows 95/98/2000/Me/XP user's manual.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.