1. Sdtc1w98.exe Driver
2. scsi951.txt File Contents

scsi951.txt Driver File Contents (Sdtc1w98.exe)

Subject: Windows 95/98 Drivers Installation 
Doc: SCSI951


For the 3150/3280/3270 SCSI controllers

Windows95/98 Installation Instructions.
Adding your New Win95 Miniport driver.

1. Double Click on Add New Harware. Click Next.
2. Click on No.  Click Next.
3. Click on SCSI Controllers. Click Next.
4. Click on Have disk.
5. Using Browse, select the drive and path where the SCSI.INF
   file is.  It will appear in the filename box.
6. Click on OK.  Click OK again.
7. Select DTC Data Technology Corp.  Click on the 3280/3270/3150 driver.
   Click Next.
8. Click Next again.  If Win95 cannot find the .MPD file, using Browse, select
   the drive and path again.  Click OK.  Click OK again.
9. A box will appear with IO address, IRQ, etc. Click Next.
10. Click on Finish.
11. Win95 is going to ask you to restart the system.  Click NO.
12. Go to Control Panel.  Double Click on System.  Click on Device Manager.
13. Click on SCSI controllers.  Highlight on the DTC Miniport Driver.
14. Click on Properties.  Click on Resources.
15. Check the Hardware IRQ and Memory Ranges with settings in the window.
    Warning:  These settings have to match for the operating system and card
              to operate in 32-bit mode and properly.
16. After checking change any setting to what the hardware is.
17. Click OK.  Win95 may ask you to RESTART Click YES.
18. Click on START, Shutdown, and RESTART computer.

You have now succesfully installed your Win95 Miniport Driver.
Note:  3150V only.  IRQ5 is the only available IRQ.  Please reroute all other 
       devices if you are using the 3150V.
______________________________________________________________________________
Subject:  6 and 7 disk changers. 

See readme file 6or7cd.txt for help.
You must use the DTC328X.MPD dated 11/28/95 from the Win95 subdirectory.

______________________________________________________________________________