Copyright CANON INC. 2000-2006. All Rights Reserved.
____________________________________________________________________
Microsoft Windows XP, Microsoft Windows 2000
Canon iP1300
Canon IJ Printer Driver Version 1.95c
Instructions
____________________________________________________________________
"Windows" is a trademark of Microsoft Corporation,
registered in the United States and other countries.
All other names and brands mentioned here may be trademarks or
registered trademarks of their respective owners.
____________________________________________________________________
< Contents >
Introduction
Foreword
Installation Components
System Requirements
Deleting the Printer Driver
Specifying Printer Driver Settings
Opening the Printer Driver Setup Window
Using the Printer Driver
====================================================================
Introduction
====================================================================
< Foreword >
This Readme gives you important information about setting up and
using the Canon IJ Printer Driver with which the Readme is
distributed. The Canon IJ Printer Driver allows you to print on
your Canon IJ printer from applications running under Microsoft (R)
Windows (R) XP or Microsoft (R) Windows (R) 2000. Before you can
use your printer,you must install the printer driver on your computer.
< Installation Components >
The following components make up the installation package:
- Installer (Setup.exe)
Installs the Canon IJ Printer Driver on your computer.
- Canon IJ Printer Driver (referred to as the "printer driver"
in this document)
The software that allows you to print on your printer.
- Uninstaller
Removes the printer driver from your computer.
- Readme (readme_english.txt)
This document. It contains important information about the
printer driver. After you install the driver, you can display
Readme by clicking the [Start] menu and selecting
[Programs]-[Canon iP1300]-[Readme].
< System Requirements >
This software requires the following system configuration:
Computer: Operation can only be guaranteed on a PC
with built-in USB or USB 2.0 Hi-Speed port
and pre-installed Windows XP or 2000.
Operating System: Windows XP SP1,SP2,
Windows 2000 Professional SP2,SP3,SP4
CPU: Pentium II (or compatible processor)
300MHz or higher
Memory: 128MB or higher
Hard drive: At least 100MB free space prior to installing
driver
Other drive: CD-ROM drive
Interface: USB interface
Screen: 800x600 or higher
Color 16bit or higher
Browser: Microsoft Internet Explorer 5.0 - 6.x
Notes:
- Conform to the operating system's requirement when
it is higher than this.
- This product is designed specifically for 32-bit versions
of Windows.
- The help may not be displayed properly depending on your
operating system or Internet Explorer version.
We recommend that you keep your system up to date with
Windows Update.
< Deleting the Printer Driver >
Delete the unnecessary printer driver according to the following
procedure:
1. From the [Start] menu, select [Programs], and then select
[Canon iP1300].
2. Click [Uninstall].
3. If the [Printer Driver Uninstaller] dialog box appears,
click the [Execute] button.
Note:
- If [Uninstall] is not found in the [Start] menu, delete the
unnecessary printer driver according to the following procedure:
1) From the [Start] menu, select the following items:
For Windows XP: [Control Panel]-[Printers and Other
Hardware]-[Printers and Faxes]
For Windows 2000: [Settings]-[Printers]
2) Select a printer name to be deleted and select [Delete]
from the [File] menu.
3) Select [Server Properties] from the [File] menu.
4) Click the [Drivers] tab. From the [Installed printer drivers]
list, and select the printer driver to be deleted.
5) Click [Remove]. When the confirmation message appears,
click [OK].
====================================================================
Specifying Printer Driver Settings
====================================================================
< Opening the Printer Driver Setup Window >
- Opening the window from your application
The typical way to open the printer driver from your application
is to select [File]-[Page Setup] and click [Printer], or select
[File]-[Print...] and click [Properties].
- Opening the window directly
To specify a regularly-used setup or to access your printer's
maintenance functions, use the procedure below.
1) From the [Start] menu, select the following items:
For Windows XP: [Control Panel]-[Printers and Other
Hardware]-[Printers and Faxes]
For Windows 2000: [Settings]-[Printers]
2) Click the icon of the printer model to be used.
3) From the [File] menu, select [Printing Preferences].
Note:
Do not change the settings on the [Advanced] tab, which is
displayed when the printer driver setup screen is opened
from [Properties].
If you change any of the settings, some of the functions may
become disabled and you will not be able to use them.
< Using the Printer Driver >
- If image data is not printed correctly, display the [Print
Options] dialog box from the [Page Setup] tab and change
the setting of [Disable ICM required from the application
software]. This may solve the problem.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.