WL300N-AR General Released Notes.txt Driver File Contents (WL300N_AR_Firmware_update_157.zip)

WL300N-AR Firmware Released Notes  for General
------------------------------------------------------
V1.57 2009/01/19
Add:
1.Add input data check function for LAN Static DHCP Lease Table.

Change:
1.Change wps default security to WPA2-AES.

Fixed:
1.Fixed Dhcip lease time default value to forerver.
2.Fixed some java script error.
3.Fixed l2tp alert message.
4.Fixed data rate display error in wireless advance setting page.


------------------------------------------------------
V1.55 2008/12/29
Modify:
1.BA time-out issue for Intel wireless card 4965AGN with version 11.5.0.32.
2.Fixed the upnp function.
------------------------------------------------------
V1.50 2008/12/08
Add:
1.Support RT2880-E IC

------------------------------------------------------
V1.29 2008/11/11
Fixed:
1.Fixed null eeprom issue for QA.
2.Fixed sometimes cause web server crash issue.
3.Fixed upnp can't open port issue.

------------------------------------------------------
V1.28 2008/10/14
Modify:
1.Change wireless driver to V1.800

Fixed:
1.Fixed Wireless function.
2.Fixed WPS Enrollee mode function.
3.Fixed site survy function.
4.After AP re-key, the ping connection from client to AP would be time-out within several seconds.   

------------------------------------------------------
V1.26 2008/10/09
Modify:
1.Remove wireless clone mac function.

Fixed:
1.Fixed Site Survey function.
2.Fixed WPS Enrollee function.


------------------------------------------------------
V1.25 2008/10/03
Add:
1.Change wireless driver to V1.80
2.Support RT2008 Version E IC.


------------------------------------------------------
V1.24 2008/09/24
Add:
1.Upgrade progress chart

Fixed:
1.Fixed can't show successful message after upgrade firmware accomplish.
2.Fixed some java script error.
3.Fixed URL block function.

------------------------------------------------------
V1.19 2008/08/11
Fixed:
1.Fixed LAN connect IPTV cause wireless ping timeout issue.
2.Fixed PPPoe manual disconnect function sometimes fail.
3.Fixed SSID contain special character( "  ' or \) cause router crash issue.
4.Fixed sometimes can't display upgrade success notice afte upgrade new firmware finish.
5.Fixed dhcp cient can't renew ip after software reboot.
Add:
1.Support IGMP Snoop.

------------------------------------------------------
V1.17 2008/06/25
Fixed:
1.Fixed lan port unable link down when software reboot or change lan ip.

------------------------------------------------------
V1.16 2008/05/29
Add:
1.Add Wps PinCode check function.
2.Support WiFi Test.

------------------------------------------------------
V1.15 2008/05/06
Add:
1.Add router discovery function for dhcp issue.

Fixed:
1.Fixed DHCP renew issue.
2.Fixed Throughput issue

------------------------------------------------------
V1.09 2008/03/20
Fixed:
1.Fixed incorrect wps pincode length. 
2.Fixed carrier sense function cause wds connection fial issue.

------------------------------------------------------
V1.07 2008/03/06
Add:
1.Support RTSP ALG.

------------------------------------------------------
V1.06 2008/02/21
Fixed:
1.Fixed DHCP function is unable to disable issue.

------------------------------------------------------
V1.04 2008.01.29
Fixed:
1.Fixed upnp enable cause wds connection fial issue.
2.Fixed Qos cause  WAN/LAN throughput unstable issue.
Add:
1.Enhance WLAN throughput.

------------------------------------------------------
V1.02 2008.01.28
Fixed:
1.Fixed Atheros External Registrar issue for wps wifi test 4.2.3.

------------------------------------------------------
V1.00 2007.12.26
Modify:
1.Increase router connection number to 3k.

Fixed:
1.Fixed eeprom not find issue  for product test.
2.BT downloan cause ping lost problem.

------------------------------------------------------
V0.25 2007.12.21
Modify--
1.Disable hardware nat.

------------------------------------------------------
V0.24  2007.12.20
Add:
1.Support WIFI test.
2.Support NetBiosName.
Fixed:
1.Fixed remote management function.
2.Fixed the LAN client get an IP address form WAN DHCP server issue.

------------------------------------------------------
V0.22 2007.12.12
Modify:
1.Modify trigger time of reset default function( Change into press reset button for ten seconds).
2.Support interrupt mode H/W button(reset & wps button).
3.Improve the trigger accuracy of WPS hardware  button (Trigger range between 0.2 ~5 secods).

------------------------------------------------------
V0.21 2007.12.07
Fixed--
Modify ATE command for product test.

------------------------------------------------------
V0.20 2007.12.06
Fixed--
1.Fixed L2tp function.

------------------------------------------------------
V0.19 2007.12.05

Modify:
Change wireless driver V1.50 to V1.60.
Fixed:
1.WPS H/W button doesn't work.
2.Fixed The Atheros wireless STA card built in MacBook can't work normally when HT mode and the encryption is WEP or TKIP.
3.Fixed Workaround for Atheros STA on AES mode.
5.Fixed The BlackBerry/HTC can't connect to our AP.
6.Fixed Before AP shutdown, AP doesn't noify those associated STA through dis-association.
7.Fixed Qos function.

------------------------------------------------------
V0.17 2007.11.15
Fixed--
1.Fixed ap bridge fail issue.
2.Fixed apclient channel select emtpy issue.

------------------------------------------------------
V0.16 2007.11.07
Add--
1.Support Wisp mode.
2.Support Universal Repeater mode
3.Support AP-Client mode.










Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.70